If you’re looking for the right technique on how to clean a mechanical keyboard, you’ve come to the right page! In this article, we will look at the proper way to tidy up your precious keyboard.
You might think that mechanical keyboards are made to stand the test of time—well sure, that’s true. However, mechanical keyboards should be given time for maintenance too, and cleaning is an integral part of this.
A Quick Guide on How to Clean a Mechanical Keyboard
Here is an easy, simple and helpful guide that you may use to clean your mechanical keyboard:
1. Before anything else, unplug!
When I was starting to learn how to clean a mechanical keyboard, I thought it was perfectly fine to clean mine while it is still plugged. While letting it stay plugged on your PC is okay for soft cleaning (just wiping of the dirt on top of your keys), I do not recommend if for a deep cleaning procedure.
Intensive cleaning may create accidental misconnections within the keyboard internals, which may end up damaging your keyboard if it’s still running on power.
2. Gather all your cleaning tools and materials
For those of you who are already using one but don’t know how to clean a mechanical keyboard, make sure that you’re using the right keyboard cleaning tools.
One common practice for some casual PC owners is to apply rubbing alcohol to clean the keyboard. While some people have told me it works okay, I have a lot of reservations on using it as part of my cleaning materials. Instead, I recommend that you use a cleaning spray that’s designed specifically for computer accessories.
3. Wipe and brush your keycaps
Doing a quick wipe on your keycaps is the easiest first step on how to clean a mechanical keyboard. Just run your brush or cloth gently on the keys and in the spaces between them.
4. Turn your mechanical keyboard upside down to let debris fall down
The next thing I always do is to give my keyboard a good shake upside down to ensure that no debris or dirt will penetrate the keys after wiping or brushing them off.
5. Remove the keycaps
Some users consider removing the keys as one of the most difficult steps on how to clean a mechanical keyboard. The good news is that it’s not as tough as it sounds.
Simply pinch both sides of each mechanical keyboard keycap until it gets detached. Gently do so by holding the keyboard in place on the desk.
NOTE: Check your mechanical keyboard product box if it came with a keycap puller tool. You may use that accessory to remove the keys more conveniently.
After removing the keys, you will notice that the switches are equally dusty or dirty. Just brush and wipe off the dirt. You’d be surprised that your mechanical keyboard switches look like brand new after cleaning them.
Clean the keys with a spray, cloth or brush. Make sure to clean the insides and the sides.
6. For deep cleaning, use the air dusting process
There are many ways you can explore on how to clean a mechanical keyboard. In my case, I do air dusting once every quarter. You may use compressed air for this, and this will allow you to generally clean off dust or debris.
7. Clean the cable, and then attach your keys again on the board
This is the last step on how to clean a mechanical keyboard. Do not forget to wipe off dust and dirt on the keyboard cable. After this, you may attach the keycaps and connect the mechanical keyboard to your PC to see if everything is working okay.
If you’re using the best mechanical keyboard that you can get your hands on, it’s safe to assume that you want to take care of it. Remember that the mechanical keyboard doesn’t really come cheap, and so you probably plan to use it for a long time.
While mechanical keyboards are built to become durable and reliable accessories for gaming or typing, they definitely need to be maintained. I highly suggest that you clean your keyboard at least once every couple of months to ensure that dirt does not build up and affect the performance of your keyboard.
The tips above should teach you how to clean a mechanical keyboard, so that you can enjoy it as long as you’re still in the mood to use your PC.
(For login issues, please ctrl+F5)
Most Recent Comments
How-To: Clean Your Disgusting Mechanical Keyboard
Computers can get gross. We’ve already posted disturbing, NSFL before-and-after photos of preventative maintenance for extremely dusty, uncleaned PC internals; now it’s time to look at the only component to accumulate more human filth than the inside of a power supply — keyboards.
Luckily, cleaning keyboards isn’t overly difficult by comparison. Sometimes. Then again, we’ve all seen the decade-old boards that are caked in brown fuzz, and I’m not so sure I’d even bother cleaning something like that.
Mechanical keyboards have the advantage of easily-removed keycaps and wider spacing between the keys. With the right tools and about 30 minutes of time, a dirty mechanical board can be restored to mostly pristine conditions. In this quick guide, we’ll cover the basics of cleaning a mechanical keyboard by removing the keycaps, applying some putty, compressed air, and adding a bit of elbow grease.
Tools for the Job
With lightly-used keyboards, you can get away with just the keycap puller and compressed air; jobs that involve more hair or caked-in nastiness would do well to add the 3M scrub brush and Cyber Clean material.
- Keycap puller ($10 with new caps). Many keyboards include this.
- Anti-static compressed air ($9 for 1 or
$20 for 4); alternatively, use an air compressor.
Not all of these are necessary, though for particularly tough jobs, they can make life easier. You might also opt for a Hazmat suit and hellfire missiles (out of stock on Amazon) in the case of especially toxic keyboards.
Keyboard Cleaning Procedure
This is pretty straight forward and doesn’t require much in the way of paragraph structure. Here’s your step-by-step:
- Remove all keycaps with the keycap puller. We’d suggest that you separate them by “right” and “left” halves of the keyboard, in case your shift / ctrl / alt buttons are of different sizes.
- Get thee to a shrubbery. Head outside, flip the keyboard over, and lightly tap the loose flakes out from the bottom. Your dead skin has now rejoined the environment as soil, making this process officially “green.”
- Blast some compressed air into the keyboard while it’s flipped over. Don’t tip the canister upside-down unless it uses a nozzle that will allow this.
- If you’ve still got hair stuck in switches or dead skin in the crevices, this is where you can apply the Cyber Clean compound to grab semi-loose particles that are more stubborn. Cyber Clean won’t grab everything, so you’ll still need to do some more work. There are stickier compounds out there, but you risk leaving sticky residue on the keyboard / switches that could cause switch sticking in the future. We wouldn’t recommend anything stronger than what was linked above.
- To remove final remnants, use the 3M scrub brush and solution (you could also apply any scrub brush or pipe cleaner with some rubbing alcohol) to scrub-out what’s left. If using solution of some kind, allow the solution to fully dry before remounting the keycaps and connecting the keyboard electrically. A Q-Tip will also do the trick, but requires more elbow grease.
- Re-apply keycaps.
Things Not to Do
- Do not apply high-pressure spray (blasting it with a hose) as this can damage or rust springs and underlying PCBs. Some keyboards will have the PCB protected with a plastic cover to guard against spills, but that might not hold against high-pressure blasting.
- If using any kind of liquid at all to clean the keyboard, do not reconnect it to a system before the liquid dries. This can short the board and destroy it.
- Don’t use sticky compound that is too sticky. Just make sure you check user reviews if straying from what is recommended here. Residue can cause switch sticking.
And that’s about it, really. Once all of this is done, your keyboard should be more responsive on the switches with fewer instances of switch sticking, it’ll be cleaner / safer in terms of health, and you can stop cringing every time you accidentally look top-down.
Consider taking this opportunity to buy some keycaps that are tailored to your favorite games, while you’ve got all the caps pulled.
In this tutorial, we will explain how to clean your mechanical keyboard, from the keycaps to the top card, and the best without buying anything specific for it.
The vast majority of us use a computer daily, whether at work or home.
Whether to play games or to type an article, or comment on a friend’s post on Facebook.
And regardless of what you use a keyboard in your everyday life, they all get dirty, primarily if you work near a building, or if your home is under renovation.
But how can we clean the keyboard without damaging it? Is it necessary to open it?
These are the questions we will answer in this article/tutorial on how to clean your mechanical keyboard.
You can also watch the video tutorial, click on it below.
What You Will Learn On This Page:
How to Clean A Mechanical Keyboard: Tools Needed
The process of cleaning your mechanical keyboard is so simple that tools will not be needed so that I will refer to them as utensils.
Some of these objects are usually shipped with your mechanical keyboard, but this is not always the case.
Well, a brush doesn’t come with your mechanical keyboard, but chances are you already have one at home.
Its measurement should be average, not too small to the point that the fibres are too fragile but not too large to be able to reach the corners of the keyboard.
Here we use a 1.5 “brush, which I think is ideal for cleaning the keyboard.
If it is not clean, I recommend cleaning and leaving no residue, and need to be dry to avoid the risk of damage to any component.
This is one of the tools that usually come included in mechanical keyboards, from the cheapest to the most expensive.
As we have some keyboards that we reviewed still in our office, we have two distinct models of Pullers, and which one you will use is indifferent.
If your keyboard does not include one of these, no problem, as they are also cheap and easy to find over the internet. Linking a Keycap Puller for under $ 1, proving it’s super affordable.
Yes, two towels, one will be used to clean the top plate and keycaps, while the other will try to dry the keycaps after washing them.
Now that we have all the necessary components let’s start our tutorial!
How to Clean A Mechanical Keyboard: The Process
Remove All Keycaps
It may seem a little obvious, but the obvious has to be said. I recommend taking a picture of the top of the keyboard with the keycaps still attached, so you know where each one goes.
After that, take it out one by one until all have been removed.
After that, take a bowl of water and put all the keycaps inside. We will not use any kind of soap and / or detergent, so there is no risk of staining, damage or malfunction of the keycaps, and the dirt comes out with water without difficulty.
Leave the keycaps inside the water basin, because now let’s focus on the keyboard itself, we go back to the keycaps later.
Cleaning the keyboard
Now we will begin the keyboard cleaning process. We will take our dry cloth together with the brush and start from top to bottom.
How much you rub and brush the brush depends on the amount and type of dirt on your keyboard, so rub it until you see it is clean, and compare it to the bottom row to be sure.
Start by wiping the brush across the keyboard, so we remove the most superficial dirt on the keyboard and lessen how much we need to clean it later.
Again, do it top to bottom so that there is no dirt coming back to areas of the keyboard that we have already started the process.
When it is necessary to clean between the switches, I recommend forming one end with the cloth, do this in the centre of the cloth, not the ends, as we do not want pieces of fabric attached to the keyboard, or falling inside the keyboard.
Wipe the cloth gently, not forcing too much to avoid pinching pieces on the sharpest parts of the switches, and to make the final finish, wipe the brush, again not applying too much force as fibres may fall and get stuck in the middle.
You can repeat the same process on the sides and bottom of the keyboard, and again I don’t recommend using water as it can seep into the inside of the keyboard or the fixing screws and rust, so just stick to the cloth and brush. Is it longer? It is, but it is also safer and ensures that we will not damage the internal parts.
Above is the result of cleaning the top plate, you can compare with the picture of Ducky just above and see a big difference.
Clearing the keycaps
Now that we’re done with the keyboard let’s turn around the keycaps, which were in a basin of water by the time we cleaned the keyboard, and so some dirt must have come out.
Set aside a small clean pot next to it so you can put the already cleaned keycaps in it and take it to dry later.
This is where our dry cloth comes into play, and we will use it to scrub the thicker dirt that still surrounds the Keycap. You can also, if you wish, bring another dry cloth to remove excess water from them, but it is not necessary.
Just as we had to remove each separate Keycap, we will clean them all apart as well. If your keyboard has double-shot or unpainted keycaps, you can scrub with medium pressure that there will be no problem.
Now, if they are Laser type, as is the case with one of our keyboards used in this tutorial, I recommend gently wiping the cloth.
The reason is simple: do not remove the upper paint because of friction. I’ve seen cases of people cleaning laser print keycaps that eventually removed some of the dye, and thus lost the original shape of the letter.
After rubbing each of your keycaps, put them in the clean pot you separated before, and take them to a place where there is no sun or excessive heat, preferably on your PC table – if it is clean and does not catch sunshine – or on any table in the house.
Let them dry entirely until there is no moisture left in them. We need to do this so that no water drips into the switch when they are re-attached to the keyboard.
You can help with the drying process using a COLD, SOLD-FREE AIR dryer, and that’s it.
Once they are completely dry, and make sure of it – don’t forget to look underneath where it fits back in the switch – you can reinsert them into your keyboard.
Use the photo you took earlier to see where each key goes to make sure there are no letters and / or symbols exchanged.
And it’s ready! You just cleaned your mechanical keyboard, and it should look much more attractive now than when we started the process.
I’ll leave a photo gallery comparing both keyboards before and after, to see that cleaning a keyboard can make a big difference.
By Mohsin Khan | Last Updated May 30, 2020
How to Clean a Mechanical Keyboard: So you bought a mechanical keyboard, and it served you well look like any piece of tech it’s gotten dirty over time dust has made its way through the gaps of the keys and the keycaps are now shiny because of the oil from your hands.
You figure it’s time for some TLC for your hardware cleaning a mechanical keyboard is easy, but it takes up a lot of your time.
So I just thought I could clean my keyboard and Jos keyboard too let’s do this before starting the cleaning process it’s always a good idea to take a picture of the layout of your keyboard.
So you have a reference to where all the keys should be.
Table of Content
STEP 1: Removing and Cleaning the Keycaps
To get all the dust and grime making your keyboard disgusting, we first have to remove the keycaps.
If your keyboard is like the Black Widow X chroma or the strafe RGB called the basic floating design where there are no recesses where the keys are you can do it by hand just gently tug on the keycap to remove it.
If it’s a standard keyboard design, you can’t do this instead you have to use a keycap removal tool.
Take extra care when removing the large keycaps because of their stabilizers.
Some come with a co-star also called wire stabilizer like the Black Widow X chroma to remove these ski caps tug on them and gently slide out one side first then the other side to remove the keycap.
Some come with a cherry stabilizer which you can just pull out, remove all the keycaps and put them in a bowler dipper.
Add water in a little bit of dishwashing soap stir a little bit to have the solvent dissipate and let us sit there for a while.
STEP 2: Cleaning the Keyboard Plate
The keyboard plate is where most of the stays, the clean this part.
I suggest using a wide soft paintbrush. I use this red number 12 paintbrush from Best Buy.
Which you can get from the national bookstore for just seventy-three pesos. Just sweep through in between the switches to get all the dust and dirt.
Out you can also use a pair of tweezers to pull out significant bits of dust and hair that might have gotten caught on the switches.
After that, if there are still persistent marks on the plate. You can use a q-tip or cotton buds with a bit of alcohol for the sides use a microfiber cloth with a bit of alcohol.
STEP 3: Drying the Keycaps
Rinse the keycaps to get all the soap out I usually do three to four rinses before going through everything with a plastic strainer.
After this layout, all the keycaps on a small towel with direct airflow to it.
Do not use a hairdryer because the heat might cause the plastic to warp or bend.
Once the keys are all dried out using a dry microfiber cloth to give the keycaps one last wipe before putting it on the keyboard.
STEP 4: Reinstalling the Keycaps
remember the photo I asked you to take before whip that out and start putting the keys back in their correct positions, and this is the longest part of cleaning.
So be sure to pull up some entertainment while you’re doing it.
After all the steps head on over to keyboard tester calm the check if your keyboard still works fine.
You’ve cleaned your mechanical keyboard it’s always such a beautiful sight this hand feels good.
When you get that good as a new look to take photos and videos up.
So that’s how you clean your mechanical keyboard do you have any questions comment down below.
Even if it’s not that dirty, it’s not a bad idea to clean it every once in a while.
So you’ve had your mechanical keyboard for a while now and are loving the snappy response of the keys. You use it for everything, but that daily wear and tear will eventually take its toll.
By now, maybe your pristine keyboard isn’t so pristine. I mean, just daily use and overnight dust can do that, and that’s before accounting for any crumbs from snacking that may be present in and around the keyboard. You do know that Cheetoh dust is almost impossible to clean off, right?
For everything else, you might be wondering how to keep your keyboard clean without damaging it. We’ll show you how.
So, what are the best ways to clean your mechanical keyboard?
Short answer: It depends on the level of cleaning you need
The longer version depends on what you need to clean. Got sticky keys? What about if you spilled liquid on it? Is it just normal crud and dust from daily use? We’ll show you how to clean up all of these, without damaging your keyboard.
Image: Kevin Raposo / KnowTechie
If all you want to do is clean off the dirt and dust that gathers from daily use, it’s fairly straightforward. You really should do this on a regular basis, as it’ll help keep your keyboard in top condition for years of use. That goes double if you snack while you’re working or gaming, as crumbs kill keyboards.
You’ll need a few things before we start: a handheld vacuum (don’t use your upright, the suction is too high), two microfiber cloths, and some water.
- Unplug your keyboard from your computer
- Use a handheld vacuum to suck off the dust from your keyboard. Make sure you go over every gap, and don’t press hard
- Grab a moistmicrofiber cloth and gently wipe the whole keyboard. You can also go with a disposable cleaning wipe, if you can find them
- Dry the keyboard off with a second microfiber cloth, this one should be bone-dry
- Don’t use a paper towel or other paper products to clean, they tend to leave more particles on the keyboard than they clean off
Got sticky keys?
Image: Joe Rice-Jones / KnowTechie
If you’ve discovered that the tops of your keycaps are kinda sticky, it’s time to clean them off. You really want them gleaming so the aesthetics of your mechanical keyboard are maintained.
You’ll need a keycap puller, a bowl of warm water, denture cleaning tablets or dish soap, some Q-tips, a damp microfiber cloth and a dry microfiber cloth.
- Use the wire hoop side of the keycap puller to remove all the keycaps. To use it, slide it over the flat sides of the keycaps, twist so it’s under the corners, then pull straight up
- Dissolve a denture tablet in a bowl of warm (not hot) water
- Put all the keycaps into that bowl, and leave them to soak for five hours at least
- Drain them from the bowl, and put them into a bowl of clean water to rinse them off
- Drain them again, dry them off with a microfiber cloth
- Before putting them back on, take a dry Q-tip and clean between all the key switches
- Then, hold the keyboard upside-down and shake gently to get out any crumbs, etc that might have wedged themselves in
- Wipe the whole case of your keyboard with a moist microfiber cloth. Careful to not get your switches wet
- Reattach the keycaps to your keyboard
- Dry the whole keyboard off with another microfiber cloth
Spilled something on it?
Oh, sh*t. The unthinkable has happened. That’ll teach you to have open cans of soda next to your beloved mechanical keyboard. Before you read further, go unplug your keyboard. Okay, phew. That limits the risk of short circuits and other electrical issues, including damage to your computer’s USB ports.
Now it’s on to recovery and cleaning:
- If you spilled water, tea, or any drink that doesn’t really dry sticky, try turning the keyboard upside-down and shaking out the liquid
- Leave it to dry for two days or more
- If you’re lucky, the liquid will all evaporate, leaving you with a working keyboard again
- If you spilled sticky drinks like soda, you’re in for a more serious recovery
- First, go read the section above again about cleaning sticky mechanical keyboard keys
- If that doesn’t work, there’s a more in-depth guide found here that gives you the best chance of recovering your beloved keyboard
Hopefully, you’re now left with a mechanical keyboard that’s in good working order again. If it’s still having issues, you might need to replace individual key switches, or even buy a new keyboard.
What do you think? Have any other tips for cleaning a keyboard? Let us know down below in the comments or carry the discussion over to our Twitter or Facebook.
- When did mechanical keyboards become popular?
- Which mechanical keyboard is the loudest?
- How do mechanical keyboard switches work?
- Which mechanical keyboard switches are the quietest?
Just a heads up, if you buy something through our links, we may get a small share of the sale. It’s one of the ways we keep the lights on here. Click here for more.
Mechanical keyboards are great; I bet we can all agree on that. However, with all those switches and cool RGB lighting, there’s a drawback too — they get real dirty, real quick. Since there is a whole lot of switches, keycaps and most importantly, gaps to account for, mechanical keyboards pick up dust and dirt pretty quickly.
What’s more annoying is that they’re quite a headache to clean. But you can’t just let your keyboard sit there and eat dust, can you? Doing so can shorten the life of your keyboard and might even affect certain parts like the RGB lights or even switch performance.
In this article, we’re going to take a look at how to clean your keyboard, without spending hours pulling out the keycaps.
To begin with, you’re going to need the following supplies.
- A wide paintbrush. Similar to the one showed in the image. I found it for 10 bucks my local hardware store.
- A couple of alcohol swabs. They cost around 2 per piece and are available at most medical stores. Alternatively, you can use rubbing alcohol with some cotton.
- Some patience
- An excellent memory. Otherwise, take a picture of your keyboard, so you don’t mix up the keys when putting them back.
Now that you have all the necessary tools, we can get on with the cleaning, which is quite simple.
All those oily keycaps are the first layer for your mechanical keyboard cleaning process. To begin with, just start pulling all the keycaps out and store them someplace safe. If you want, you can dip your keycaps in a bowl of water with some dishwasher in it, and that’ll clean them out thoroughly.
As you can see, I have an absolute mess here
If you’re like me, however, just wipe them with a microfibre cloth later.
Once you’re done with the keycaps, give your keyboard a light shake to get rid of any big chunks that might’ve gotten in there. After that, use the brush to brush off the dust inside gently.
Alcohol swabs can tackle any deposits on your base plate
Once you’re done with the dust, take the alcohol swabs and run them around the edges and the base plate. This should also take care of any dirt deposits that might be there.
Now if you’ve dipped the keycaps in water and dishwasher liquid, you’ll first have to rinse them in water for a couple of times. Once you’re done with that, just lay them out on a dry towel and let them dry out. Please don’t use something like a hairdryer to dry them as the heat can cause the keycaps to warp.
This is the longest process. So just put on some music, whip out that picture we took in the beginning and start putting the caps on one by one. Be sure to rub them with a microfibre cloth once before you put them up though.
And there you have it — a shiny clean mechanical keyboard.
Programmer, developer, Electronics/DIY Enthusiast, video game nerd and a photographer with a tinge of music.
Contact Yadullah via email: [email protected]
Been awhile since you cleaned your keyboard? A dirty keyboard doesn’t just look awful, it can result in sticky keycaps and clogged switch housings. If you’re a gamer or hardcore user, this can easily ruin your session and sabotage your productivity. The solution? Learning how to clean a mechanical keyboard.
We’ve put together this mechanical keyboard cleaning guide so you can protect your investment and get back to the action fast. To make the process as easy as possible, the guide has been broken up by the best way to clean a keyboard for specific situations. Whether you need to perform a quick once-over, a deep clean, or a total refurbish, we’ve got you covered.
But first, let’s take a quick look at how mechanical keyboards are constructed.
A Glimpse Inside the Mechanical Keyboard
Mechanical keyboards utilize individual ‘switches’ underneath each keycap. These switches are comprised of a housing, a spring, and a stem. When a typist presses down on a keycap, the spring on the switch compresses and relays the click to the keyboard processor via an electrical signal. From there, it travels to the computer’s processor and voila! The words or, in the case of gaming, actions appear on the screen.
But what happens when a keyboard accumulates too much dust or debris around the switches? You’ve got yourself a stick-key situation (sorry). When a switch is surrounded by too much gunk, it oftentimes won’t spring back up after pressure is removed. Another common issue is that your key won’t compress at all. In fact, there are a variety of problems that you may encounter.
Fortunately, keycaps can be removed fairly easily. This allows you to quickly clean problem keys, or even remove the entire set of keycaps for a deep clean of the entire board. Don’t worry– cleaning a mechanical keyboard is easier than it sounds.
How to Clean a Mechanical Keyboard
There are many different reasons to clean a mechanical keyboard. Grease, dust, and stray crumbs are all major culprits. These circumstances are usually easy to tend to, and can be fixed in just a few minutes. Another potential cause? The dreaded spill, which can brick a keyboard if not tended to immediately.
Depending on the severity of the situation, you’ll want to opt for a preventative surface-level clean, or go all out with a deep clean. Either way, we’ll show you how to remove keys from mechanical keyboards, as well as how to safely clean a keyboard. That way, you can tend to whatever issue you encounter.
Preventative maintenance of keyboards is crucial to stop any major issues before they occur. It’s also useful for minor issues such as surface-level grime, one or two sticky keys, and similar problems. Plus, it only takes a few minutes.
Pro Tip: Before we begin, note that it’s always good to have a bottle of the best keyboard cleaner & compressed air on hand for preventative maintenance. Speaking from experience, it can be a real lifesaver.
- Keyboard compressed air or handheld vacuum
- Small brush
- Damp microfiber cloth
- Dry microfiber cloth
- Optional: If you’re having issues with sticky keys, use your fingertips to take hold of the problem caps and pull them away from the board with medium force; then set them aside, as we’ll wipe them down with the rest of the board
- Unplug the keyboard and bring it to your workstation
- Take your handheld vacuum or compressed air and gently go over all the keys, focusing on the spaces between each cap
- Next, take your small brush and wipe away any excess particles
- Using the damp microfiber cloth, rub down the keyboard and any of the keycaps you removed to get rid of stuck-on grime (avoid the switches on the board)
- Dry everything with a microfiber cloth & reattach any keys
If you’re experiencing several clogged switch housings and sticky keycaps, your keyboard likely needs more attention. Unfortunately, this is a lot more intensive than a simple preventative clean. That’s because you’ll need to clean the exterior of the entire board, as well as learn how to clean keycaps individually.
Very dirty switches in need of a deep clean
This will take awhile, but it’s crucial for getting your keyboard back in working order.
- Recommended: WASD Key Puller
- Bowl of warm water
- Dish soap
- Keyboard compressed air or handheld vacuum
- Small brush
- Soft sponge
- Dry microfiber cloth
- First, unplug the keyboard and bring it to your workstation
- Using the WASD Key Puller or your fingertips, remove every single key from the board
- Fill your bowl with warm water and several drops of dish soap
- Submerge the removed keycaps for 3-4 hours
- Come back to the cleaning project and follow steps 3-6 from the preventative instructions above, substituting the damp cloth with the soft sponge
- Voila! A sparkling clean and like-new mechanical keyboard ready for action.
Sometimes a keyboard is really dirty and even a deep clean won’t solve your problem, as is the case with major spills. In these instances, it’s all about damage control and really getting inside the keyboard itself.
That’s a bit beyond the scope of this article, but we’ve found an excellent resource that can help. Namely, the penultimate Reddit Keyboard Spill Guide. This guide is loaded with information and recommendations to help get your keyboard back in tip-top shape after a major incident.
And for things not covered there? The best option is to check the warranty and contact the manufacturer with questions or concerns. And if that still doesn’t solve your problem, you can find a bunch of awesome replacement keyboards here.
Mechanical keyboards are a treasure for any computer user. Over time, they can easily build up dirt, dust, oils, and crumbs between the keys. This can create some gross looking keyboards, with oil buildup on the home row too.
Debris between the keys is a common problem every keyboard owner will encounter. It only makes sense to know how to clean a mechanical keyboard in this modern age.
Everyone loves to reach for a can of compressed air, but many times it’s not even necessary. Below are some tips for cleaning your mechanical keyboard at home.
Tapping the dirt out
To start with, you may just want to tap a few crumbs out of the keyboard. Flip the keyboard over, holding it over a towel or directly over a trash can, and lightly tap the back of it to shake loose any debris under the keys.
SPECIAL REPORT: How to Clean a Mousepad
If you have never cleaned your keyboard before, you will see plenty of old friends fall out.
You can use a small brush that fits between the keys for a more thorough cleanse. Hold your keyboard upside-down at an angle, so you can still see the keys.
Sweep all the dirt to one side of the keyboard, going between each row. Starting by sweeping right to left from the space above the number keys, then move to the space under the number keys.
Alternatively you can hold the keyboard on its side and sweep between the keys that way.
Compressed air can
Of course we had to include the compressed air method. The compressed air will blow out any loose debris or hairs in the keyboard. Place the spray nozzle on before you start using the air can. Make sure to unplug your keyboard too.
Start by holding the keyboard tilted with the keys facing down. This uses gravity to help with your job. Blow in one direction only, and try to angle the nozzle to blow the debris out of the keyboard, not just to the other side.
Keep the air can upright, as spraying with the can upside-down can release chemicals into the keyboard, potentially damaging it.
Removing the keys
If your keyboard is really dirty or you have spilled a beverage on it, unplug it and remove the keys one by one and do a thorough cleaning on the bare board itself. Take a picture of the keyboard before you start dismantling so you will know the proper place for each key.
When you get all the keys off, you can wash them off in a soap and water mix in a bucket. Use a soft bristle brush to sweep out all the debris.
If you have a bottle or pipe brush, using that with a little rubbing alcohol goes a long way to removing grime. The compressed air can will also help with removing debris.
If you just want to clean off the surface of the keys, you can use an alcohol wipe to remove oil residue and dust. You can also use a spray cleaner and paper towel for the same effect.
Learn how to clean your mechanical keyboard with our easy to follow steps.
How to join the Resident Evil Project Resistance closed beta
The Project Resistance closed beta will decide the fate of the game, so find out how to join on PS4 and Xbox One.
A mechanical keyboard, unlike a membrane keyboard, is a keyboard that uses individual keyswitches to register each keystroke on a keyboard. One of the many benefits to owning a mechanical keyboard is the ease at which you can take apart and clean the whole keyboard, something you are unable to do with a membrane keyboard.
Here are some simple steps that will help you clean your mechanical keyboard:
Removing the Keycaps
Before we get started, unplug your keyboard. We don’t want moisture and electricity mixing, plus if you’re using a mechanical RGB keyboard or a mechanical keyboard with any type of backlighting, the bright lights might be a distraction during the cleaning. Once the keyboard is unpowered, the first thing you should do is to learn how to remove and replace the keycaps. Our article here shows you how to easily remove and replace keycaps without any bumps in the road. Using a key puller, remove the keycaps from your keyboard. It is recommended to do this in groups and to organize the removed keycaps so that you can put them back on without having to remember which key goes where. Make sure to carefully remove the larger keys like the space bar, shift, and enter keys because on some keyboards these will have a support bar underneath that is easy to break and hard to replace.
Once the Keycaps are Removed
Once the keycaps have been removed be sure to get rid of any loose debris from the keyboard itself. This can be done by turning the keyboard over and shaking the debris out, or by taking a can of air and blasting the debris away. To clean up any spills that may have occurred, take a damp microfiber cloth and wipe up the liquid. Make sure you are very careful to not get any water directly into the keyboard as most mechanical keyboards are not water-resistant, you must put the water onto the cloth and use that to remove any debris or sticky substances. If deeper cleaning is necessary, you may take diluted liquid soap and apply it to the cloth, once again, taking great care to never directly apply any liquid directly to your keyboard and keyswitches. To dilute the liquid soap, take one drop for every gallon of water. After cleaning the inside of the keyboard, move your attention to the keycaps and clean them, as well. If the keycaps are very dirty you can use a small amount of diluted soap placed on a microfiber cloth to clean each keycap individually. If you don’t want to clean the keycaps individually you can clean them while they are attached to the keyboard by wiping them with a slightly damp microfiber cloth.
Placing the Keycaps Back On
After making sure that there is absolutely no residual liquid or moisture lingering in the keyboard, turn it over and let it air dry overnight for good measure. Once the keyboard is completely dry, put the keycaps back on one by one. If you washed the individual keycaps, make sure they’re also completely dry when you place them back onto the keyboard. Reference the article here for a more complete guide on how to put keycaps back on. Once the keycaps are on the keyboard take a slightly damp microfiber cloth and wipe off the keycaps one more time.
Once everything is on the keyboard, turn the keyboard upside down once more and let it dry overnight again. This might seem like an overabundance of caution, but you want to be completely certain that there is absolutely no residual moisture left in the keyboard before you connect it and run electricity through it. The more drying time you give the keyboard, the safer it’ll be.
Do you know to clean a mechanical keyboard and avoid extra expenses on service? Most of us spend plenty of time in front of the monitor. However, over time, we all notice that some of the kes stop working correctly because of dust and junk. We will provide you with guidance on how to clean mechanical keyboard and save your money!
Image: pexels.com (modified by author)
Many of us spend plenty of hours by the computer and face particular problems related to its work from time to time. The problem is that many people also like to watch movies and have some snacks or drinks by the monitor. Moreover, quite often, they burst with laughter and throw snacks all over their computer desks.
As a result, small crumbs penetrate to the keypad, make it sticky, and hinder productive work. Is it possible to clean mechanical keyboard without spending money on its technical service?
How to clean a mechanical keyboard quickly and easily
Image: pixabay.com (modified by author)
To clean mechanical keyboard from crumbs, dust, and all sorts of spills is a necessary task if you want to enjoy proper work of your computer. You should do it regularly and carefully.
Upon the type, one distinguishes three categories of keypad cleaning:
Which one will you regard as the best way to clean a mechanical keyboard? It all depends on the current state of your equipment. Thus, it is up to you to choose which one to try.
What is the best way to clean mechanical keyboard
Image: pixabay.com (modified by author)
If you have recently bought a new console, it is evident that your device does not need deep cleaning. However, if you have never applied any cleaning to your console, you should look through our guide to define the means of cure for it.
1. Preventive cleaning
The procedure for cleaning a mechanical keyboard is quite simple. You will need a vacuum cleaner, a slightly damp microfiber tissue, a piece of dry fabric, and patience:
- First of all, unplug the keypad from your computer.
- After that, switch on a vacuum cleaner and start cleaning the keypad to get rid of the dust and crumbs.
- Next, take a slightly damp napkin and wipe the keypad down.
- Finally, take a dry piece of fabric and repeat the action.
Pay attention that using such a product as canned air is strictly forbidden when the situation has a relation to cleaning keyboards.
2. Deferred cleaning
In spite of regular maintenance, a keyboard could keep on attracting and accumulating dust. How to clean your mechanical keyboard in such a case?
All you need to do is to prepare the necessary tools and follow these ten simple steps:
- First, disconnect the console from your computer.
- Then, remove the keycaps with a special tool called keycap puller. However, you might find it hard to take some big keycaps off (like “Enter,” “Space,” “Shift,” etc.). In this case, you can also use a slightly damp microfiber tissue to wipe them off.
- If you still question: “How to clean keycaps?” you should know that the procedure is easy and requires no special skills. Take a bowl and pour some warm water in it. Then add some dishwashing liquid and put the keycaps into the mixture. Let them soak for a few hours. Rinse the keycaps thoroughly and put them on a dry tissue to dry out.
- The next step you should make is to clean the keyboard gently with a cotton bud. In this way, you will remove the dust and all unwanted particles that got stuck to it over time.
- Switch on the vacuum cleaner and hoover the clavier carefully. If there is still some small debris, try to turn the console upside down.
- Pay attention that while cleaning the keypad you have to avoid using damp tissues as the moisture can damage the switches of your device and lead to their corrosion.
- Place the keyboard upside down until the keycaps get completely dry.
- After that, you have to place the keycaps in their proper places.
- Wipe the console again with a slightly dry microfiber tissue.
- Repeat the action with a dry cloth. Note that it is prohibited to use paper towels as they can damage the surface of the keypad.
What if the keypad is a purchased one and you wish to remove all the signs of the previous owner?
3. Advanced cleaning
Buying used items or a particular exchange is a widespread phenomenon nowadays. However, when you receive the desired product, you may find out that it is not clean enough to start using right the next minute. Is it possible to clean a mechanical keyboard without extra help?
Follow our guidelines, and you will succeed:
- Start from disconnecting a keyboard from your computer and take the keycaps off (as in the deferred cleaning).
- It would be great if you have an ultrasonic cleaner at home. It makes keycaps cleaning quick and efficient. However, if you do not have such an appliance, you can repeat the procedure of the cleaning keycaps in warm water where you should add some dishwashing liquid.
- Place the keycaps on a dry tissue and leave until the moisture evaporates.
- Take a turn-screw and open the keypad corps.
- Pay attention to the screws, their size (sometimes they can be different), and place so that you can settle them on a proper position.
- To make the procedure more convenient, you can take pictures step-by-step to avoid any mistakes. In case if you need to disconnect some cables, do not hesitate to do it carefully.
- After you separate all the details, you have to clean the parts of the keyboard body. You can also vacuum them where it is possible.
- Take a slightly damp microfiber tissue and wipe the dust off. Repeat the action with a dry cloth. In case if the plastic parts of the corps get too dirty again, you can soak them in warm water with adding dishwashing soap.
- Make sure that all the details you washed in the liquid are dry now and get ready to collect the appliance.
- One more step you cannot miss is cleaning mechanical keyboard plate with switches. The procedure is quite simple: you can use cotton buds to pull the dust away. However, be careful when you work with the damp tissue. Make sure that the moisture has no contact to the switches. Otherwise, it will lead to corrosion.
- When all the elements are clean and dry, it is time to collect the keyboard.
- Make sure that you place the keycaps on the corresponding places.
- Done! Work and enjoy it.
Have you already decided how to clean a mechanical keyboard? We provided a straightforward explanation of how to do the cleaning procedure at home and avoid spoiling both time and money. In case if the keyboard gets dirty, you will always know what guidelines to use to reach the desired effect. Moreover, now you can help your relatives and friends to improve the work of their keyboards!
RELATED ARTICLESMORE FROM AUTHOR
NAS For SMEs – Why Should You Get One?
Top 5 Work From Home Apps To Improve Productivity During MCO
Hardware Security Keys: Protect Your Passwords
Technically: 5G and Types of 5G Explained
Smartwatch – To Buy or Not to Buy
Ah, yes. It’s that time of the year. It’s time to clean the… What in the heck is THAT??
Image from gamersnexus.net: how-to-clean-mechanical-keyboard-putty (http://bit.ly/2IU3nGP)
“I remember I went to the park with bubble tea. Not the keyboard. Why does it look like this. What.”
That’s what you’re probably thinking as you pry off the keys; one by one to reveal the darkness you never knew you had in front of you all this while. Yeah. We don’t know how these things get that way either. What we do know, is how to clean them!
Exorcising the Darkness
What you will need:
– Compressed Air
– Cotton swabs
– Rubbing alcohol (Isopropyl Alcohol)/ Warm water
The next few steps will walk you through on what to be doing.
1. Unplug the keyboard
Detach the keyboard from your PC, and be sure to take a picture of the keys. This will help you during the reattachment stage later on.
Image from technobuffalo.com: logitech-g-pro-keyboard-review (http://bit.ly/2L2qIZE)
If you’re confident with remembering the entire placement, that’s great. You must be proud. What a skill to have.
Move on to the next step.
You can now begin detaching the keys from the keyboard. This can be done by pinching the sides of a key and pulling it until it pops off. Be firm but not too aggressive. The keys were made to be detachable.
Image from windowscentral.com: how-remove-mechanical-keycaps (http://bit.ly/2GCW0BW)
3. Air Force
We’d advise to be outdoors for this, but given the frequent hot weather occurrence, you could settle for a rubbish bin. Hold your keyboard diagonally towards the bin and tap it lightly. This will get rid of the larger and heavier dirt. When you’re somewhat satisfied, it’s time to bring out the fun part of the cleaning process.
The compressed air.
Image from wikipedia: Gas_duster (http://bit.ly/2UvL6Sl)
Direct the nozzle towards the keyboard and blow out whatever remains of the dust and dirt. The air will should be strong enough if the nozzle is placed closely to the keyboard. It can be incredibly satisfying as you see the particles leave your keyboard.
4. This Will Take Swab Time
Believe it or not, the compressed air can only do so much. It can get to hard-to-reach areas like the deep corners of the keyboard, but it can’t remove 100% of the dirt. This is where the cotton swab comes in.
Image from kitchenerclean.com: office-cleaning-services-blog (http://bit.ly/2ITI4W3)
You don’t need a lot of them. One or two should be enough.
Scrub out the last remnants of dust, food, grime, and hair. You might need a little strength for this as these things can be really stubborn.
5. Warmth of Love
Now, yes. We know it says “alcohol”, but this isn’t the same one you take at the bars or the ones you have at home (no need to deny; we know you have them). This is “rubbing alcohol”; you know, for CLEANING stuff and treating wounds? In all seriousness, if you drink this, our condolences. If you’re still alive after that, you better think about what you’ve done.
Image from cleanmyspace.com: rubbingalcohol (http://bit.ly/2XGb0F8)
Back to the tutorial.
Pour out a little of the alcohol into the cap. Use a few cotton swabs and dab them in the liquid. You can then wipe the space between your key buttons on the keyboard. This should get rid of the unseen dirt and grime. Alcohol evaporates pretty quickly so you don’t need to dry them.
If you don’t have access to rubbing alcohol, you can use a slightly damp static-free cloth to wipe your keyboard buttons. Microfiber cloth counts as static-free.
Image from www.today.com: how-use-microfiber-cloth-clean (https://on.today.com/2IFjMQm)
For the keys, simply do the same. Use a cotton swab, dab it with alcohol and clean the sides especially.
Again, if you don’t have access to rubbing alcohol, a small pail of warm water will do. Soak the keys in the water and scrub them gently. Using a piece of cloth is fine as well. If you’re using water, you might need to leave them out to dry indoors for a bit.
You should be done in about 30 minutes to an hour of cleaning. Once you’ve polished every key to your liking, it’s time to reassemble all of it.
Remember the picture you took at the earlier stage? It’s time to refer to it and put everything back together. If you didn’t… *sigh*… Here’s one to help you out.
Image from raru.co.za: cooler-master-masterkeys-pro-l-rgb-us (http://bit.ly/2VqTU0c)
Your keyboard should now feel good as new (unless you broke something). Plug it back in and enjoy using it! Game on. Type on. Whatever it is you do with your keyboard.
Fancy more articles like this? Consider Liking us on our Facebook!
A lot many questions may arise in your mind while buying a Way To Clean A Mechanical Keyboard. Some of these may be:
1. How to choose the best Way To Clean A Mechanical Keyboard?
2. How to have the best Way To Clean A Mechanical Keyboard?
3. Which is the best affordable Way To Clean A Mechanical Keyboard in the market?
4. Which is the best Way To Clean A Mechanical Keyboard for the year 2020?
5. Which specifications make the Way To Clean A Mechanical Keyboard suitable for your purpose?
All these questions need to be answered before choosing any Way To Clean A Mechanical Keyboard. This requires knowing various factors and information before choosing any Way To Clean A Mechanical Keyboard. So, you should refer to an appropriate buying guide for Way To Clean A Mechanical Keyboard and consultation before making your decision.
Thus, we have provided one such guide for you here compiled using Way To Clean A Mechanical Keyboard reviews From the Best Laptop Brands.
We have used some efficient algorithms and technologies for compiling the following list of top Way To Clean A Mechanical Keyboard available from most reputed and trusted brands.
The list is regularly updated by us so that you have the best of products all the time. For a quick buy just check the below-given list. For complete details and specifications of the laptop, you can scroll down.
A keyboard in need of cleaning.
It’s a widely known fact that humans are filthy, especially our hands. And here you are, touching your keyboard all the time. It’s bound to get grimy, so it’s a good idea to clean it on occasion. You have to be careful how you go about this so as not to break anything. The first step is figuring out what kind of keyboard you have.
Most people use laptops, so this is where we’ll start. Virtually every laptop maker has adopted a flat chiclet-style design to save space. If your board is just a little dusty, you can grab a can of compressed air and give it a puff. If you’ve let it go longer, you may need more extreme intervention.
To clean the oily reside from keys that eventually builds up on your screen, consider using a small amount of rubbing alcohol (91-99% isopropyl). Using a cotton swab, test the alcohol on a keycap that’s out of the way. Some UV-treated caps and those with low-quality pad-printed legends can be damaged by the alcohol. You can switch to water with a few drops of laundry detergent or diluted Simple Green if the alcohol is a problem.
$1,200 Stimulus Checks Not Included In Trump’s Executive Measures. Here Is What You’d Get
Could You Get A Second Stimulus Check By Executive Order?
New Apple Leak Reveals iPhone 12 Design Shock
A laptop keyboard scissor switch.
If everything looks good after the test, start swabbing the keycaps. Use a new swab after every few caps, and don’t use so much alcohol that it drips all over. It should dry very quickly and you can get back to computing.
If you’ve got grime inside the keyboard on your laptop, you’ll need some tools. Apple’s butterfly switch and traditional scissor switches are similar when it comes to popping the keys off. You can use something like a guitar pick, but I recommend you get a toolkit (like the ones sold by iFixit) that include plastic and metal spudgers. They’re useful for so many thing.
To remove the keys, slip your tool under the top of the cap and gently lift it up. It should pop off without much force. With the keycaps off, use compressed air to blow out all the dust and hair. To put the key back, line the keycap up and push it back down starting with the bottom edge. Again, be gentle.
There are a few more intricacies when it comes to the external keyboards you plug in via USB. The basics from above still apply: use compressed air and clean keycaps with rubbing alcohol (after testing). If you’re worried about damaging the keycaps, you can use water with a few drops of laundry detergent or diluted Simple Green instead. Still use a cotton swab to control how much you apply to the key. Be extra careful with the legends on cheap keyboards—the pad printing might not survive a vigorous cleaning intact.
If you’re using a cheap membrane board (like the ones that ship with desktop towers), you might have to check with the maker to ensure the keycaps can be removed. All mechanical keyboards have removable keycaps. To get keycaps off, you can pry them up with a screwdriver or spudger. You really shouldn’t, though. To avoid damage, buy a wire keycap puller. They only cost a few bucks on Amazon.
Removing a keycap the right way.
With the keycaps off, you can blow all the grime out of your keyboard. If the keycaps are really, really dirty, you might consider soaking them overnight to get the dirt off. If you opt for this, do not use rubbing alcohol. Fill a container with lukewarm water, add your keycaps, and drop in a denture cleaning tab.
After cleaning, just push the keycaps back down where they go. A word of warning: if your keyboard has a wire stabilizer under larger keys like space and back space, they can be a pain to deal with. If you don’t absolutely have to remove them, don’t.
And that’s it. Your keyboard should be much less gross now.
Ryan is a writer, skeptic, lover of all things electronic, and Android fan. He writes words about all these, and hopes you’ll read some of them. Ryan’s most difficult…
Ryan is a writer, skeptic, lover of all things electronic, and Android fan. He writes words about all these, and hopes you’ll read some of them. Ryan’s most difficult decision each morning is which fancy mechanical keyboard he’s going to use. He’s the author of a sci-fi novel called The Crooked City, which is available on Amazon and Google Play.
Should you need to remove the keycaps on your mechanical keyboard to clean the device or to switch out the caps and add a personal touch, you’ll need to use a keycap puller. These small accessories wrap around a keycap, enabling you to pull out the caps without damaging them or the switches they’re attached to. Gone are the times of spending a solid 10 minutes attempting to launch keycaps into space using a pocket knife.
Depending on the keyboard you purchase, the manufacturer may include a keycap puller. If not, you can pick one up off the likes of Amazon from $6. There’s the choice between a wire and plastic remover, but both work in a similar fashion and should be absolutely fine in completing the task at hand.
Attach the puller to the keycap you wish to remove.
Pull up on the keycap to remove it from the switch.
Be careful when removing keycaps, especially if your keyboard has LED backlight illumination. Should you have the input device plugged in and turned on when removing keycaps, you’ll be greeted by some blinding lights. Thus we urge you to ensure everything is turned off and unplugged before attempting to remove them. That and it’s generally good practice to turn electronics off before working on them.
There are custom keycaps available for purchase that can add textured feel to certain keys (like WASD for gamers) or new colors to differentiate said keys from the rest. Just like the keycap removers, some keyboard manufacturers will include these optional extras with their units, but if not you could try online stores who specialize in custom keycaps:
If all else fails, you can bend a paperclip flat, create a “U” shape and bend both ends inwards to create your own DIY keycap removal tool.
We may earn a commission for purchases using our links. Learn more.
Update 6: Microsoft wants all of TikTok, but Trump’s order may interfere
The Financial Times reports that as part of negotiations, Microsoft is now inquiring whether it can buy all of TikTok, instead of just the business in the US., Canada, Australia, and New Zealand. This new plan would include India and Europe (and excluding China).
Apple responds to Project xCloud iOS block, Microsoft kicks back
With Microsoft’s Project xCloud streaming platform locked out from iOS devices, Apple doubles down on App Store restrictions.
‘The Nether Update’ for Minecraft: The 1.16.2 update, and everything new you need to know
The Nether Update is the latest major release for Minecraft, and it changes everything about the fiery Nether. Here’s everything you need to know.
Best Affordable Desk Chair for Kids in 2020
Everyone needs a comfortable and practical chair to sit at their desk with, and that includes kids who are working on homework or arts-and-crafts. Here’s a list of some of our favorite options.
Mechanical Keyboard is love ♥
I love Mechanical Keyboards, and due to this, I thought to write a few blog posts about it. In the last post, I wrote about the difference between Mechanical Keyboards and Regular Keyboards in which I also mentioned what exactly a Mechanical Keyboard is and what are its benefits. If you are still unaware of these keyboard types, you must read that post.
Table of Contents
In this blog post, I am going to talk ‘How to clean a sticky Mechanical Keyboard.’ Cleaning is important because every day a good amount of dust goes into your keyboard through the gaps between the keys. If you don’t clean ever, they may stop your keyboard to work smoothly. Therefore, the best ways to clean a Mechanical Keyboard are what we need to implement so that our Keyboard turns out to be very clean.
Before, I share my views on ‘How to clean a Mechanical Keyboard,’ let me tell you that everyone has his/her own ideas and tricks for cleaning their keyboards. I am sharing the ways which I use.
Ways to Properly Clean a Mechanical Keyboard
Turn Upside Down
Keyboard’s keys have visible gaps between them, and that’s the reason dust and other particles always go into it, and the best way for getting them out a bit by turning it upside down. This is not enough to clean it thoroughly but the very first step I take is to turn upside down and thump it from its back so that a little bit of dirt comes out.
Make sure; you turn your keyboard upside down above paper, so the dirt falls onto it, and don’t get scattered here and there. One more thing, always start the cleaning after removing the Keyboard wire from your computer.
How to clean mechanical keyboard keycaps?
If the dirt is too less, you can just clean the key gaps with a brush but if it is very dirty and you haven’t cleaned it for a long time, remove the keycaps from the keyboard first. This could be the best way to clean a Mechanical Keyboard as keycaps of a Mechanical Keyboard are easy to remove. You can easily remove them with anything, but I would suggest you get a Keycap Puller to remove the caps easily and safely.
Important Note => Before removing the caps, capture a pic of your keyboard so that when you refit the caps, you don’t forget the actual arrangement. If you forget, you can check out that pic, and correct yourself.
Photo credit: preater.com
After removing all the caps, keep them all in a container. Put warm water in the container and you can also put white vinegar or detergent there. And, soak the caps for few hours. Later do check those caps; you will see they look cleaner a bit. Now, take a brush probably a toothbrush, and clean each cap separately with it. Once done, clean with clean water, and then dry them with a cotton cloth. Now, keep those caps separately on a table and let them dry for a night to make sure there won’t be a single drop of water left there in any of the caps.
Photo credit: preater.com
This is how we can clean the caps.
Now, since caps are removed, the board is all open to clean.
Photo Credit: daskeyboard.com
Most of us use earbuds to clean our ears; now we can use that to clean the Keyboard. Since the caps are removed, you can easily clean the gaps between switches with the earbud. After that, use a small handheld vacuum cleaner to get all the dirt out from there (Try USB Vacuum Cleaner). If you still think there is some dirt, then again turn the keyboard upside down as we did in the 1 st point above.
Also, put a cotton cloth and spray some cleaner and wipe the whole keyboard (mostly the edges and the key-less parts) with that. You will see everything looks much cleaner now.
Now, check the keycaps which we kept to dry; if they all dried up, fix them all to their positions on the Keyboard.
Now, look at your Keyboard, it must be looking clean.
Removing the caps from keys is easier in Mechanical Keyboards as they are designed that way. However, some Membrane keyboards’ keycaps are also easy to remove but not in all. Therefore, the cleaning process of Mechanical Keyboards is more fun and easy.
Make use of a Can of Compressed Air
You can easily get a can of compressed air which you can regularly use to blow the dirt from your Mechanical Keyboard. You can blow a strong stream of air to the keyboard, and you will see that the dust is pushed out. The only drawback of this method is that it pushes out the dirt outside of the keyboard and spread around.
Use Cleaner Jelly
You can find out Cleaner Jelly Online, and get for you because it helps you clean your keyboard effortlessly. You only need to put the jelly on the keyboard and flatten it, and then after some time, remove it.
You will notice that the keyboard looks newer than ever. You can watch the video to know how you can clean using the Jelly.
In this video, it is shown that the jelly applied on the keys. Moreover, you can apply it after removing the keycaps as well for better cleaning.
As I said at the beginning of this post, different people may have different tricks to clean their Keyboards but these ways mentioned above are the basic ones, and almost all type of Keyboard cleaning revolves around these only. Moreover, the best way to clean a Mechanical Keyboard is what gives you a neat and clean Keyboard.
Now, I hope you guys know how to clean a Mechanical Keyboard and even you have learned how to clean mechanical keyboard keycaps by removing them and then cleaning.
If you still have any questions, do write in the comments.
You noticed your keyboard has dirt, some keys are stuck, some keys are not registering properly …or maybe you just spilled some coffee on your keyboard. What do you do now?
The answer is plain and simple: clean it. Here’s how to clean a Corsair Vengeance K70.
The Corsair Vengeance K70 comes with Cherry MX Red key switches, ten contoured buttons for gaming, anti-ghosting, adjustable back-lighting, multimedia controls and even a detachable wrist rest. For those of you not familliar with what I am talking about, this is a Corsair Vengeance K70:
Corsair Vengeance K70
Cleaning the keyboard
Here’s what you will need in order to clean the K70 (this also applies to other mechanical keyboards too):
- Paper towels
- Ear buds
- Warm water
Some people might recommend some canned air or an air compressor, but in my opinion, they’re not necessary.
To start off with the cleaning of your keyboard, take a picture of the keyboard and then remove all of the keys using a keycap puller or, if you do not have one, remove all of the keys one by one manually. Be very careful when removing larger keycaps, they usually have their own stabilizers. Some keyboards come with a wire stabilizer for larger buttons, but this isn’t the case with the K70.
Here’s how Corsair’s Cherry MX Red switches look like when the keyboard is dirty:
The keys don’t look all too pretty when the keyboard is dirty either:
In order to clean the dust and dirt between the switches and on the keys, take some ear buds, pour some warm water on them and sweep the dirt away. Do the same with the keys. Repeat the process until you clean the switches and the keys. Be sure to clean the whole keyboard plate. You can also clean the keys using warm water and some dishwashing soap. The switches, when clean, should look something like this:
Clean Cherry MX Red Switches
After you have cleaned the switches and the keycaps, lay out all of the keycaps on a paper towel and leave them to dry. Do not use a hair dryer – the heat coming out of it might cause harm to the keycaps (it might cause the keycaps to bend).
Final touch – reinstating the keycaps
In order to bring the keyboard back to its former shape, use the snapshot you took earlier to reinstall all the keys into their former positions. After you’ve successfully done that, you’re pretty much done. Here’s how the keyboard should look like now:
Computer keyboards need consistent maintenance to prevent the buildup of grime that occurs from constant use. In addition, being sat on top of your desk, a keyboard is prone to collecting dust which can cause issues with the keys. Nonetheless, good quality keyboards can last for several years, if maintained properly.
As a result, we have created this guide covering a few methods of cleaning a mechanical keyboard. It is best to alternate these methods to ensure that we clean our keyboards in an out. Do keep in mind that the first step in all these approaches is to disconnect the keyboard from the computer.
Frequently Dust & Wipe
First of all, dusting, wiping and making sure that grime doesn’t collect can go a long way in increasing the life of a keyboard.
A particularly nasty habit that we develop over time is having our meals in front of the computer. Tiny food particles can settle in the gaps between the keys and the board. I remember one such incident. I began typing on my keyboard, only to find that something was stinging.
It was a horde of angry ants which had made a cozy home inside the keyboard! That’s when I realized how much of a gap is present, which allows small particles to pass through and get lodged between the keys. The gaps between your keys may vary depending on what type of keyboard you have, you can learn more in our mechanical vs membrane keyboard guide.
Steps for regular keyboard cleaning
- Turn the keyboard upside down and tap it. Big particles lodged between will fall out.
- If you have a vacuum cleaner at home, you can try this step. A thin nozzle vacuum cleaner extension is a great boon. Use it tactfully. We should be careful about the vacuum pressure as keyboards have delicate circuits.
- Using a slightly wet piece of cloth, wipe the keys slowly. Make sure you cover all gaps between the keys.
- Do not use a cloth with loose fibers or tissue paper to wipe the keyboard, since they will leave a residue behind. An old cotton shirt or microfiber gym towel are good options.
The Spring Clean
If left unchecked, grime grows quickly on keyboards. As a result, it gets harder to clean them if they dry up and remain untouched for many months at a stretch. The keyboard can also turn into a breeding ground for microorganisms.
Steps for occasional keyboard cleaning
- Follow the steps for the frequent approach first.
- Using a keycap remover, gently unfasten all the keys which are of the same size. Usually, the special keys such as spacebar, Enter and Shift will be firm. The letter and number keys, which are of the same size, are easier to tackle first.
- After pulling out all the keycaps, it is best to soak them in a homemade cleaning agent. A little detergent or dish wash soap in warm water are effective options. Let the keys soak in for a while.
- Scrape off the grime on the keys using a sharp tool. This is easy after the keys have soaked for a few hours. Put the keys to dry on a mat.
Once in a year
If you have never cleaned the keyboard from the time you bought it, or it feels very dirty, it can take a while to do so. Apart from grime, a variety of oils from our skin, food oils and dust particles can form layers on the keys. To revert the condition of the keyboard to its original state, here are a few steps.
Steps for cleaning the keyboard after a long gap
- Begin by soaking the keys in a homemade cleaning solution, as explained in the previous set of steps.
- Dismantle the keyboard. Unscrew the nuts and bolts holding the frame together. This is a difficult task, owing to the sensitive nature of keyboard parts. Take as much time as you need for this step. All cables, circuits and boards should be kept carefully.
- Moisten one end of an earbud. If available, you can dip it in an alcoholic cleaning solution. Check that the solution is not too strong, as there is a risk of circuits getting fried. Similarly, use a stiff brush to sweep out dust particles that may have remained.
- Finally, reassemble the parts after they are dry. This is the most important step. Make sure all the wires are in place and the keycaps have gone back to their position. You may consider using anti-static wrist straps for this too.
In the case of spills, if the liquid penetrates the keyboard, we have found that you need to immediately disconnect the keyboard. You can either wait to for it to dry completely before reconnecting it or play it safe and also clean it before reconnecting. If that doesn’t work, you will need to call tech support for assistance.
Consequently, cleaning the keyboard once in a few months is the best approach to take, and can be done at the same time as cleaning your mousepad and mouse. Certainly, we are busy individuals and may not have time to do it often. But ignoring it for over a year makes our job harder later. Happy cleaning!
If you are looking for a compact mechanical keyboard, then see our best tenkeyless mechanical keyboard buyers guide.
About The Author
David has been interested in computers for over 25 years. From playing games on his parents computer as a kid in the early 90s, to building his first PC in 2003 (and many more since then). He has a passion for everything related to computing and this site is dedicated to helping others find the info they need.
You get plenty of reasons to clean a mechanical keyboard. A well-qualified mechanical keyboard can work for years. After a long-time usage, there can be dust and grime inside the switches. Spills happen at times. The sticky keycaps are not good to use and affect typing and other activities. You can’t throw away a mechanical keyboard, because it’s quite expensive. Fortunately, cleaning a mechanical keyboard is not that hard. Easily-removed keycaps are one mechanical keyboard’s advantage. In this quick guide, some basics of cleaning mechanical keyboards will be covered. Cleaning is an important part of mechanical keyboard maintenance.
To avoid grime and dust accumulation, daily cleaning is quite important. You’d better not to eat next to your keyboards such as chips or popcorn. The particles could enter keycaps, and fuse to the switch’s metal plate.
To clean the surface dust, you can use a damp cloth to clean the keyboard lightly and dry it with another cloth. It’s better to use a microfiber cloth to prevent needless particles or the keyboard cleaning gel. As for the gaps between the keycaps, you can use a vacuum. There are small hand-held vacuums designed for keyboard cleaning. I won’t suggest you use the compressed air dusters. Air dusters could blow the dust into the keyboard switches to cause the dust accumulation and affect the switch function.
- Keycap puller (optional): you can pull out the keycaps easier. However, it’s optional. All Velocifire mechanical keyboards come with keycap pullers. Big keys such as space, enter, or shift are a bit hard to pull out. They have different structures. You need to be careful when you pull these keycaps our with your fingers, following the right angle. If you are not good at removing and resetting them, you can just leave them alone.
- Microfiber cloth: Two pieces of microfiber cloth. One is damp, and the other is dry. It’s not suggested to use the paper towel that could leave paper particles, scratches, and not environmental-friendly. The microfiber cloth can be reused.
- Cotton swabs: They are used in the gap and switch cleaning.
- Small brush/teeth brush (optional): Dip it with warm or hot water, and brush the whole keyboard cautiously. Please choose a soft brush. The hard ones may leave some scratches. Brush off the spare water first!
- Warm water/hot water/soap water: Water is very friendly. It won’t damage your keyboard. Hot water works great to remove the sticky. Or you can use soapy water. It takes some time and water to rinse.
- Alcohol or other cleaners: if your keyboard needs to deep cleaning, you can use alcohol. Dilute it with some water, otherwise, it’s too strong. There is a chance that the alcohol could remove the UV coating and cause discoloration. Please try water first. If there is a necessity to use alcohol or other cleaners, you can test it on the back of the keyboard first.
- A container: Contain and wash all removed keycaps.
- Rice(optional): It fastens the drying. Normally, natural drying takes 2-3 days.
- Lubricant(optional): Apply lubricant to switches to reduce the clicky sound.
I found out that some people use dishwasher or submersion to clean keyboard. I won’t suggest you use this method. Do not take venture with your expensive mechanical keyboard. During the washing, it could destroy the series number. You will void the warranty. You don’t want to throw away your mechanical keyboard. If you have determined to use a dishwasher, please remember the four tips.
- Set the lowest possible heating
- No drying cycle
- Keep full drying for 2-3 days
- Re-lubricate your switches
Procedures to clean a mechanical keyboard when spills happen
Spills happen sometimes. Water is easy to deal with. Sugar beverages are truly a problem. If the spills do not enter the switches, you can follow the below steps to clean your mechanical keyboard. If the switches get affected, you have to replace them (it really costs time and money) or just buy a new keyboard. Buy a well-sealed mug!
Step 1: Disconnect your keyboard.
Step 2: Drain your mechanical keyboard immediately. Use a towel to wipe the surface water, and leave it to dry away.
Step 3: Once the keyboard is dry, you can pull out all keycaps for deep cleaning. It’s easier to use a keycap puller, but it’s fine if you don’t have one. If you pull them out with your fingers, you should pull out straightly up. Big keys have different structures. You need to pay attention to them.
Tips: before you pull out the keycaps, you can take a picture to record the layout in order to put them back in the right order.
Step 4: Soak the keycaps in a container with warm water for 4-6 hours. You can shorten the soaking time if the keycaps are not dirty. Some people use soapy water. It’s a little difficult to rinse away. Maybe you can try denture cleansing tablets. They work amazing! Then after the cleaning is done, you need to put them on a dry cloth to dry them naturally.
Step 5: Clean the tray/ baseplate. When the keycaps soak, you can clean the tray and switches. Use a vacuum first, it will suck out all dust and particles. Then apply a damp microfiber cloth. As for these tiny gaps, use swabs to clean. Do not dip too much water. Try the best to avoid moistening the switches.
Step 6: When the cleaning is finished, place the keyboard in a shady and cool place to dry it naturally. Place the keyboard face down to prevent dust. Some people prefer to place it under the sunshine to fasten the drying. I won’t suggest it. It will discolor the keyboards. It normally takes 2-3 days to fully drying, so just be patient. If you have emergent needs, you can use a hair drier or rice to fasten.
Step 7: After 2-3 days, replace all keycaps according to your taken photo.
When your computer keyboard is starting to get some sticky buildup, or a few of the keys are squeaking every time you press them, it’s time for a good cleaning.
Regular cleaning and maintenance of your keyboard helps ensure you’ll be able to use it longer. This is especially important if you own a mechanical keyboard, because dirt and grime can interfere with all the moving pieces that make the keyboard so awesome to use.
While most of you are familiar with using canned air and disinfectant wipes to get your keyboard in tip-top shape, there’s another cleaning method some computer users advocate: the dishwasher.
Really? The dishwasher? Yes, some people throw their keyboard inside and let the larger machine do its thing.
But is this really the best thing for your mechanical keyboard? Let’s look at the facts.
Some Keyboards CAN Survive the Dishwasher
If you search the internet for stories about computer users who washed their keyboards in the dishwasher, you’ll find that it does work for some of them.
For example, this author on NPR tried cleaning his keyboard several years ago after reading about another user’s success. He said even though he chose to wait a week for it to dry, it was “absolutely spotless.”
Additionally, there are keyboards that are waterproof, if you really want to take this cleaning route but don’t want to risk ruining a keyboard. A Florida called Seal Shield makes dishwasher-safe keyboards you could consider purchasing for your everyday use, and save your mechanical keyboard for specific purposes like long typing or gaming stints.
But Using the Dishwasher Isn’t the Way to Go
When you’re curious about how to clean your keyboard, and you do own a mechanical one, you should avoid the dishwasher method at all costs.
We already mentioned some of the drawbacks to dishwasher cleaning in our Mechanical Keyboard Guide, like how exposing circuits and other electrical parts to water could render the entire thing useless. Suddenly, you’d be looking at replacing that $100+ mechanical keyboard.
In addition, using the dishwasher to clean your keyboard takes a toll on your stress and productivity. If you’ve never tried to clean with the dishwasher before, you have no idea if the keyboard will come out all right or if any sort of hard water deposits will prevent it from working. That’s a lot of added pressure on your already-busy plate.
And considering it could take several days for your keyboard to dry thoroughly (like the NPR author’s did), you’d have to find a temporary solution or replacement keyboard to use during the time your primary one is out of commission.
Your Best Bet for Keyboard Cleaning
Sticking to the old-fashioned canned air, disinfectant wipes, and even small amounts of alcohol is the safest way to get your mechanical keyboard clean. You won’t have to worry about the thing coming out broken and dysfunctional (unless you’re really harsh during your cleaning process).
Remember to check out our cleaning section in the Mechanical Keyboard Guide for step-by-step instructions. They’ll take a bit more time than a dishwasher, but you’ll get longer-lasting, safer results.
Do you think you’d ever try cleaning a keyboard (mechanical or otherwise) in a dishwasher? Tell us why or why not in the comments!
Are You Thinking About Clean Your Gaming Mechanical Keyboard?
As you use the mechanical keyboard, it continues to accumulate more dust, dirt, and grime. And that’s why you need to do everything in your power in order to clean it up.
The last thing you want for your mechanical keyboard is to be a collection of bacteria that can harm your overall health. Here are some tips to help you clean a mechanical keyboard properly.
Tools you might need to clean your mechanical keyboard
- Keyboard Cleaning Glue (Free US Shipping)
- Keyboard Cap Remover (Free US Shipping)
- Ultrasonic Cleaner (Free US Shipping)
Do preventive cleaning as much as you can.
You want to avoid having your mechanical keyboard too dirty, so preventive cleaning can come in handy. Unplug the keyboard and try to use a vacuum in order to eliminate dust from the plate. You want to press the attachment tube to acquire as much dust, dirt, and grime as possible. Some handheld vacuums will have dedicated attachments that work extremely well for this, so try to take that into consideration if possible.
It’s also a very good idea to wipe the keyboard down with a microfiber cloth. Make sure that the cloth is slightly damp, so it can take most of the dirt and grime, as it helps quite a bit. Once you do that, make sure that you have another, dry cloth nearby as that will be able to help you clean it up. A good rule of thumb is to not use a paper towel, because that will shed particles that eventually scratch the keyboard.
Simple, yet efficient mechanical keyboard cleaning tips
Before you continue with the cleaning process, it’s important to have the right tools. That means you need to rely on stuff like rubbing alcohol, cotton swabs, compressed air and many others. All of them can help more than you imagine, and the results themselves will be great! In order to clean everything properly, you need to remove all the keys. Ideally you want to take a picture and then make sure that you know the position of every key. Once you do that, it can lead to some really good results.
At this point you need to remove the keys. Some mechanical keyboards have their own tool to remove keys, so that’s something you want to keep in mind. Or you can just pinch the sides of the key and pull it up. When you do that, the key will just pop off and it will work very well.
This is where you need to use the compressed air, because it will remove most of the dust, crumbs, bacteria and so on. You can hold this over the trashcan, so all the unwanted compounds fall directly in there without any worries. It’s a great approach and one that will work pretty well if you manage and tackle it in a proper manner.
After you do this, you will have to use a cotton swab to clean up the mechanical keyboard in a much more attentive manner. The problem is that a lot of dust, dirt and grime accumulates under the keyboard, and a cotton swab is one of the safest ways to eliminate that properly. The challenge here is that the entire process is time-consuming, which can be a problem for some people. However, if you take the time and you are meticulous, you can take really good care of the mechanical keyboard and that alone can be a lot more impressive than you might imagine.
An interesting thing about this cleaning process is that you can use a second pair of cotton swabs, these ones can be rubbed into alcohol in order to remove all the remaining particles from your keyboard. The process itself is tricky, but with the right amount of attention it can work very well. It’s important to know what challenges you are dealing with and once you handle that, it will be worth it for sure.
Cleaning the keys is important because you want to have clean keys on the clean keyboard as well. This is maybe the most time-eating process because it takes a lot of time and effort. If you pay attention and clean everything properly, it will be amazing. Once you clean the keys, you just want to rebuilt and hook up the keyboard to your computer. It’s all you need and it will help make a huge difference!
Ultrasonic cleaning helps too if you are willing to go with something like this. The idea here is that you need to remove all the keys from the mechanical keyboard, and then you add them into the ultrasonic cleaner. This helps because it vibrates the water at high frequencies. You eliminate grime naturally and with amazing results, and that will lead to safe, clean keys. It’s a godsend especially if you buy a used keyboard and want to be sure you won’t deal with any infections.
Clean with a small stiff-bristle brush
What you want to do here is to loosen any particulate matter that can still be found in your keyboard. This accumulates as time goes by, and it’s important to try and remove it as fast as you can. It’s certainly not going to be a walk in the park, but it will get the job done and that’s exactly what will help clean up all the unwanted dust, dirt or grime. This is also a good time to use a slightly damp cloth. These 2 tools can make a huge difference when it comes to cleaning a mechanical keyboard. You don’t need expensive cleaning kits or anything like that.
It’s crucial to clean up your mechanical keyboard as often as you can. Remove all that unwanted dust, dirt, and grime and it can make a huge difference. Just focus on your health and wellbeing, something as simple as cleaning the mechanical keyboard can do wonders in the end. And it’s one of those things that might not matter a lot at first, yet whose results will impress you quite a bit. Just try to keep this in mind and you will appreciate the results quite a lot when you clean the mechanical keyboard!
By Sigismondo Eisenhower 2019-06-24 609 0
It is now time to look at the only component that can accumulate more human dirt than the inside of a power supply: keyboards. Whether they are mechanical, gamers, azerty or qwerty. It’s time to clean up your gamer keyboard!
The essential equipment for a good cleaning!
Fortunately, cleaning a mechanical gamer keyboard is (sometimes) not too difficult in comparison.
Once again, we’ve all seen the 10-year-old keyboards covered with a brown crust, and I’m not so sure I’d bother trying to clean something like that.
The advantage of the mechanical keyboard: Mechanical keyboards have the advantage of having key caps that can be easily removed and a wider spacing between the keys. With the right tools and about 30 minutes of time, a dirty mechanical keyboard can be essentially restored to its original condition.
In this short guide, we cover the basics of cleaning a mechanical keyboard by removing the key caps, applying sticky paste, compressed air and using a little elbow grease.
Cleaning mechanical gamer keyboard: Cleaning tools
● A key extractor: most keyboards include this tool but you can find them at a low price on GearBest
● A compressed air tank: to remove debris without removing the caps from the keys, or before. Ditto, it doesn’t cost much to buy
● A microfibre cloth
● Rubbing alcohol: used to remove skin oils and dirt if you do not want to remove the key caps and to gently rub between the keys
● Dishwashing liquid: used to soak the keys if you intend to clean them thoroughly
● Q-tips: you can also use Q-tips. It’s for cleaning between switches and switches
With lightly used keyboards, you can simply get away with a key puller and compressed air; those that involve more hair or agglomerated dirt can be easier to clean with a 3M scrub brush and Cyber Clean compound.
All this is not necessary, but for particularly difficult cleaning jobs, they can make life easier. You can also opt for a Hazmat combination and Hellfire missiles (out of stock on Amazon) in the case of particularly toxic keyboards.
Steps for cleaning mechanical gamer keyboard
It’s quite simple and doesn’t require many paragraphs. Here is the step-by-step instructions for use:
● Remove all keys with the key extractor. We suggest that you separate the keys from the “right” and “left” halves of the keyboard, in case your Shift / Ctrl / Alt buttons are of different sizes.
● Get a shrub. Move outwards, turn the keyboard over and tap lightly on the underside of the keyboard to remove dust and crumbs. Your dead skin has now joined the environment as a fertilizer, making this process officially “green”.
● Send some compressed air into the keyboard while it is turned over. Do not hold the bottle upside down unless it uses a nozzle that allows it.
If there is still hair stuck in the switches or dead skin in the veins, this is where you can apply the cleaning paste to catch the slightly stuck particles that are more stubborn.
● The cleaning paste will not remove everything on your gaming keyboard, so you will have to keep cleaning. There are more sticky compounds, but you may leave sticky residues on the keyboard / switches that could cause key sticking in the future. We do not recommend anything stronger than what has been mentioned above.
● To clean your gamer keyboard and remove the final remains, use the 3M scrubbing brush and solution (you can also use any scrubbing brush or pipe brush with denatured alcohol) to remove what remains. If you use a solution of any kind, let it dry completely before putting the keys back on and plugging in the keyboard.
Replace the key caps.
Cleaning gamer keyboard: Things not to do
Do not spray high pressure spray (blow with a hose) to clean the gamer keyboard as this may damage or oxidize the springs and underlying printed circuit boards. Some keyboards have a printed circuit board protected by a plastic cover to protect against liquids, but this may not be sufficient against high-pressure spraying.
If you use any liquid to clean the gamer keyboard, do not reconnect it to a system until the liquid has dried. This could short-circuit the keyboard and destroy it.
Do not use a compound that is too sticky. Be sure to check user reviews if you deviate from what is recommended here. Residues can cause the keys to stick together.
The final word
And that’s more or less all, really. Once all this is over, your keyboard switches should be more sensitive and the keys should stick less often, it will be cleaner/healthier, and you can stop having backward movements every time you accidentally look at it from top to bottom.
Consider taking this opportunity to buy key caps that show your favorite games, as long as all keys are removed. You are now armed with dirt to clean the mechanical gamer keyboard correctly.
|You may also want to read:|
|Xiaomi Amazfit Bip 2 first overview: comparison with Amazfit Bip|
|Xiaomi Mi band 4 NFC version VS Samsung Galaxy Fit smart band|
|MIUI 11: List of Xiaomi devices getting MIUI 11 upgrade leaks|
Extensive Product Selection
● Over 300,000 products
● 20 different categories
● 15 local warehosues
● Multiple top brands
● Global payment options: Visa, MasterCard, American Express
● PayPal, Western Union and bank transfer are accepted
By now, we’ve pretty much all heard the line about keyboards being dirtier than toilet seats. And, uh, umm, excuse me while I go vomit behind the dumpster.
Anyway, I’m sure YOUR keyboard isn’t that dirty, and mine sure as hell isn’t. So this guide goes out to all the gross dudes.
As they say, prevention is the best cure. The best way to ensure your keyboard doesn’t acquire toilet-status is to maintain it regularly. A maintenance cleaning entails a simple shake-out and a wipe-down. How often you need to do this will depend on your personal hygiene level, but for most people, once a week is fine.
Step 1 (Shake Out) – Grab your keyboard, take it to the nearest trashcan, turn it upside down, and shake it out. (Don’t worry about removing the keycaps.) Even if you obsessively wash your hands and don’t eat around your keyboard, it will inevitably soak up dust, hair, and other crud. Shake it out!
- Use a dripping wet cloth or apply liquid cleaner directly to the keyboard or keycaps.
- Use straight isopropyl alcohol or stronger solvents. Usually, isopropyl will be okay, but sometimes it can react with keyboard plastic and fog it up — I once ruined an IBM Model F XT case this way. Anything stronger than isopropyl alcohol — just don’t do it.
- Blow compressed air into your keyboard. While this method is effective at getting dirt out from underneath keys, it can also force grit into your switches. Shake your keyboard out instead. Or if you must use air, go from blow to suck.
If you take a minute or two to maintain your keyboard every week — or even just when you notice some dirt — you shouldn’t have to do a deep cleaning more than once a year. But when you let it get to that point…
Here’s how to really get your keyboard spic ‘n span. This is also a great procedure to follow if you buy a used keyboard — having your keyboard covered in your own grime is one thing, but a stranger’s grime is a whole new level of shame. Don’t do it!
Step 1: Remove your keycaps. I strongly recommend a wire keypuller; it’s too easy to damage your keycaps using a cheap plastic keypuller. There’s a proper technique, too — use the keypuller to hook opposite diagonal ends of the keycaps and gently wiggle them off. Put the keycaps in a watertight plastic container, such as Mom’s tupperware.
- Do anything I told you not to do during a maintenance cleaning.
- Also, be EXTREMELY cautious with the amount of liquid solvent you use around the switches. This goes for water as well. Switches love to drink via capillary action, and if you use more than the bare minimum amount of liquid necessary, you’re taking a big risk. DON’T DO THAT!
Disaster Prevention: Keep the Food and Drink at Bay
Finally, as a word of caution, consider not eating or drinking around your mechanical keyboard. This is the quickest way to really nastify your keyboard. And plus, sooner or later, you’ll f*** up, and your keyboard will be there when you do. And it will be ugly. So… keep the food and drink where it belongs, boys.
There you have it — now you know how to maintain your keyboard’s cleanliness, and if the occasion should call for it, how to do a deep cleaning. If you have any questions, leave a comment.
Coming up next time: a spill recovery guide.
Keyboards are usually indispensable part of computers, and most people are found like using mechanical keyboard as its quick responsiveness. But cleaning a mechanical keyboard is a universal struggle, which needs both patience and skills. There are many ways available online, but some of them are risky to try. In order to avoid ruining your keyboard while cleaning, the editor provides you with some authentic ways here and gives some tips to maintain it and some don’ts while cleaning.
If your keyboard only needs a routine clean, this is an easy thing to be done.
- Free any crumbs and debris stuck under the keycaps by facing your keys down and shaking it.
- Using compressed air to help blast out anything that wouldn’t come loose from shaking.
- Using Q-tips or brush to clean between the keys.
The common case is that you have left the keyboard not cleaned for a long time, so it’s time to take apart your keyboard and for a deeper cleaning.
- The first step is to use a tool called a keycap puller to remove all of the keycaps from your keyboard.
- Get each of them scrubbed and submerge the keycaps in a bowl containing a solution of warm water and denture cleaning tablets. Let the keycaps soak and then wipe them off. (Never use hot water and make sure they all completely dry before reattach them)
- After finishing the keys, you need to turn your mechanical keyboard upside down and dump all of the dirt and debris onto the ground. (Be careful not to shake out any of the internal pieces from your mechanical keyboard.)
- Dampen a pipe cleaner with some rubbing alcohol and gently run the pipe cleaner along the dismantled keyboard. (You can also use some diluted laundry detergent, better to wipe off the solution quickly, and don’t let it sit on the plastic. Be sure to let the remnants of the rubbing alcohol dry completely before you put your mechanical keyboard back together.)
- When everything is done then you could reassemble your keyboard and so you can enjoy your new keyboard.
Well, if you have a waterproof one, things would be much easier. For example, the $11.99 GK100 mechanical-membrane gaming keyboard from Redimp.
Things you can’t do to clean your keyboard
Do the following things, you may take risks to ruin your keyboard.
- Clean your keyboard in the dishwasher.
- Wipe your keyboards with nail polish remover or anything with acetone.
- Use hard chemical or solvents straightly without a little test.
Take some preventive measures to keep your keyboard clean. There are two common and useful tools can help you free from dirty keyboard, they are compressed air and anti-static vacuum. The former involves in blowing a strong stream of air onto your keyboard that pushes out all of the dust and debris that has settled in those hard-to-reach places between the keys. And the later help your keyboard stay cleaner for longer by sucking up all the gross stuff that accumulates in your mechanical keyboard. You can use them regularly to keep you keyboard clean.
SHARE( 0 ):