July 31, 2019, 8:00am EDT
A factory reset wipes your router’s custom settings and returns it to a like-new state. This is an important step when troubleshooting some network problems. Factory-resetting is relatively easy, but every router is a bit different.
What Is a Factory Reset, and When Should You Do It?
A reset isn’t the same as a reboot, which people sometimes mistakenly refer to as a “reset.” Just like a PC, a reboot shuts down your router and starts it back up. It’s a good troubleshooting step if your router is acting strangely.
A factory reset, on the other hand, wipes all your data from the router. This includes any passwords, Wi-Fi network details (like your network name (SSID) and passphrase), and any other settings you’ve changed.
Essentially, it’s like you just purchased the router from the factory, hence the name. And that’s the point. If your router is acting strangely and a reboot hasn’t helped—or you think it might have router malware—a factory reset might fix the problem. But there’s no going back, so this shouldn’t be your first troubleshooting step. At the very least, try a reboot first. It might also be a good idea to upgrade your router’s firmware and see if that fixes the problem.
A factory reset is a good idea if you’re selling or disposing of your router. This way, whoever gets your router next can start fresh, without seeing any of your personal information (like your Wi-Fi passphrase.)
How to Factory Reset a Router with a Button
Warning: As we explained above, this erases all your router’s custom settings, including its Wi-Fi network passphrase! You’ll have to set it up again.
Nearly every router uses a different admin interface, but that’s ok; you might be able to bypass it entirely. First, look closely at the router—most have a reset button on the back or bottom. You might need an unwound paperclip to press it.
On many routers, if you hold in the button for 10 seconds, it factory resets your router. If that doesn’t work, try the 30-30-30 method:
- Hold in the button for 30 seconds.
- Unplug the router for 30 seconds.
- Plug the router back in.
- Hold in the reset button for another 30 seconds.
How to Factory Reset a Router via the Web Interface
If your router doesn’t have a reset button, you have to reset it using an option in its configuration interface.
We recommend consulting your router’s manual. You can search the web for your router’s model name and include “manual” to find an online version. The manual will help you connect to your router’s web interface, and also show you where the reset option is.
Unless you have a mesh Wi-Fi system (in which case, you have to use that device’s app to reset it), you usually start by determining the IP address you need to log into your router’s admin interface.
On Windows 10, you can find this by going to Settings > Network & Internet, and then click “View Your Network Properties.” Look for the “Default Gateway” entry—that’s the IP address. Here’s how to find your router’s IP address on any platform.
Plug that IP address into your favorite web browser’s address bar and press Enter. You should see your router’s admin interface and a prompt for the username and password. If you’ve never changed your router’s login details, chances are both the username and password are “admin” (without the quotes). If you aren’t sure, try checking a website like routerpasswords.com for your model. You can also find this info in your router’s manual.
From there, dig around to find the factory reset options. They’re different for every router manufacturer (and even vary from model to model). Check any tabs named “Restore,” “System,” or “Settings.”
On the Asus router we have, the option is called “Factory default,” and it’s located under Administration > Restore/Save/Upload Setting.
You can likely save your router’s settings to a file using its web interface, too. After factory-resetting the router, just re-import that file. If those settings were causing a problem, though, restoring the saved settings file might also restore the bug.
Again, resetting your router wipes everything you’ve done to customize it, from Wi-Fi passphrases to your custom DNS server. You’ll essentially have a “fresh out of the box” router again.
How to Hard Reset Your Router – Routers’ Specifications, Manuals and Factory Reset Information all brand : Netgear , TP-LINK , Linksys, ASUS, Cisco , D-Link
How to hard reset TP Link TL-WR810N v1.1 router – Default Login & Password
The TP-LINK TL-WR810N v1.1 router has 300mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.It is also known as the TP-LINK 300Mbps Wi-Fi Pocket Router/AP/TV Adapter/Repeater. How to hard reset (factory reset) TL-WR810N v1.1 : Your […]
How to hard reset TP Link TL-WR810N v2.x router – Default Login & Password
The TP-LINK TL-WR810N v2.x router has 300mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports. How to hard reset (factory reset) TL-WR810N v2.x : Your can hard reset your TL-WR810N v2.x with ways bellowUse web interface […]
How to hard reset TP Link RE350 router – Default Login & Password
The TP-LINK RE350 router has Gigabit WiFi, 1 Gigabit ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1200 Mpbs.It also supports custom firmwares like: LEDE Project How to hard reset (factory […]
How to hard reset TP Link RE350 V1.x router – Default Login & Password
The TP-LINK RE350 V1.x router has Gigabit WiFi, 1 Gigabit ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1200 Mpbs.It also supports custom firmwares like: LEDE Project How to hard reset […]
How to hard reset TP Link RE355 router – Default Login & Password
The TP-LINK RE355 router has Gigabit WiFi, 1 Gigabit ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1200 Mpbs.It is also known as the TP-LINK AC1200 Wi-Fi Range Extender. How to […]
How to hard reset TP Link SR20 router – Default Login & Password
The TP-LINK SR20 router has Gigabit WiFi, 4 Gigabit ETH-ports and 0 USB-ports.It is also known as the TP-LINK AC1900 Smart Home Router with Touch Screen. How to hard reset (factory reset) SR20 : Your […]
How to hard reset TP Link TC-7620 router – Default Login & Password
The TP-LINK TC-7620 router has No WiFi, 1 Gigabit ETH-ports and 0 USB-ports.It is also known as the TP-LINK DOCSIS 3.0 High Speed Cable Modem. How to hard reset (factory reset) TC-7620 : Your can […]
How to hard reset TP Link TC-W7960 v1.0 router – Default Login & Password
The TP-LINK TC-W7960 v1.0 router has 300mbps WiFi, 4 Gigabit ETH-ports and 0 USB-ports.It is also known as the TP-LINK 300Mbps Wireless N DOCSIS 3.0 Cable Modem Router. How to hard reset (factory reset) TC-W7960 […]
How to hard reset TP Link TD-W8901N v3 router – Default Login & Password
The TP-LINK TD-W8901N v3 router has 300mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports. How to hard reset (factory reset) TD-W8901N v3 : Your can hard reset your TD-W8901N v3 with ways bellowUse web interface […]
How to hard reset TP Link TD-W9977 router – Default Login & Password
The TP-LINK TD-W9977 router has 300mbps WiFi, 4 Gigabit ETH-ports and 0 USB-ports. How to hard reset (factory reset) TD-W9977 : Your can hard reset your TD-W9977 with ways bellowUse web interface :Open a browser […]
ORBI router connects a wide range of devices to the same wireless network, providing cost effective unified communications. The premise behind the invention of ORBIS AP was to enable portable, stable and flexible wireless local area networks in the corporate offices, access point, or anywhere else required. The technology is based on the packet-switching technology. The same company that invented the technology also developed the ORBI that uses the same technology for connecting to the same network in different places in different ways.
The WLAN has many modes like auto detection and broadcast, out of which it is used extensively in large offices. The WLAN operates on a private network which can be accessed by anyone when he knows the username and password. It is useful in multiple-location data management and central office telecommunication. It is a simple and cost-effective solution for increasing productivity in a very short time.
The router is a small device having a radio transmitter and a receiver and speaker that let the user interface of the system. The user can set up the network in the background or view it on the monitor of the wireless access point. It helps in configuring the network for optimal performance. It also acts as an access point for other wireless devices such as computers, printers, scanners, keyboards, and mice.
There are many advantages of using the ORBI wlan. Some of these are saving money and time and avoiding intrusion from external sources. This makes the wireless router, a must have in the offices. The router provides the users with their own wireless network at a single place. You can also configure your wireless router to connect to different wireless networks for sharing the data.
If you are still confused about the product, let us take one example. Suppose you want to set up your wireless printer in your office. To connect the printer to the network, you can connect it through the printer port or use the printer’s USB ports. However, this option may not be convenient for some of the people who use computers. Using this option will also occupy a lot of space. With the Orbi App Router and after orbi router login password, all these problems can be solved.
What is the Orbi App?
The Orbi app makes it handy to set up and manipulate your WiFi router. Just plug in your mobile unit to Orbi’s WIFI network and the app will help you through the rest. Once set up, your connected devices would be easy to manage, can do a quick Internet speed test, can pause the Internet, can set up Circle® with Disney smart parental controls, and many more.
Some browsers may have stored this page by accident. Do the instructions below to clean the cache and try again:
- For Internet Explorer (IE) – For Internet Explorer, click on Tools > Internet options and select Delete browsing history. See if all options are checked and then click Delete.
- For Google Chrome – For Google Chrome, navigate the browser toolbar, click More Tools and choose Clear Browsing Data. Click on the “beginning of time” option and then click Clear Browsing Data.
- For all other browsers – You can refer to your browser’s user menu. There is one in every device.
You can also check the router login website if you can’t login.
How to perform a factory reset
To perform a factory reset:
Check if your router’s power light is on.
At the back of your router, look for Restore Factory Settings or Reset button.
Make use of a paper clip or the like to press and hold the Restore Factory Settings or Reset button for seven seconds.
Stop pressing on the Restore Factory Settings or Reset button and it is all set, your router has been reset. When you log in to your router again, use the default login credentials (username: admin and password: password).
To power cycle home network
If you have connection problems with your NETGEAR device(s), doing an overall power cycle of your network can help fix these issues. To power cycle your home network connection, you need to turn OFF every networking device and then put them back ON.
Note: You can access it using a wired Ethernet connection. This is the direct-wired connections to the router which can provide better results. You can also test access with a different device (phone, tablet, laptop, desktop, etc.). Again, the NETGEAR router is the best tool for the internet connection to have access to the NETGEAR router login page. A wired connection is the surest way to access the router.
Rebooting your network devices in the right order makes all the difference
Reboot your router and modem if you suspect your network isn’t working as it should. Maybe web pages aren’t loading, Netflix freezes halfway through a movie, or your smart speakers suddenly stop playing music.
Whatever the case may be, restarting the router gives it time to cool off and flush out its memory. Sometimes, especially with older hardware, having the router on and working in overdrive for too long is enough to demand a restart.
When to Restart Your Router
Restarting (also known as rebooting) is one of the simplest troubleshooting steps you can take to fix what isn’t working properly. Does Windows seem a little buggy today? Reboot the computer. Is your iPhone not connecting to Wi-Fi anymore? Restart the phone and try again.
It can be annoying when describing a problem to an IT department or a tech support agent and they suggest a restart or reboot right away, but the fact is, restarting fixes a lot of problems.
Restarting also fixes problems with network hardware, such as a digital modem (be it cable, DSL, satellite, or fiber) and a router. Did your smartphone and laptop both lose connection to the internet? Is your NAS no longer showing up on your desktop? Are your connected devices sluggish when it comes to streaming and browsing online? If so, reboot the router and modem. Rebooting network hardware corrects network and internet issues 75 percent of the time or more.
The router and modem must be restarted in the right order for the reboot to fix the problem. If the devices are not rebooted in the correct order, you could lose internet connectivity completely.
How to Reboot a Router & Modem
Steps to Reboot a Router and Modem
Follow the short process below for the best possible chance of improving the situation. Rebooting this way works with most makes and models of routers and modems.
The following process is not the same as resetting a router or modem. See Resetting vs. Rebooting at the bottom of this page for more information.
Unplug the router and the modem. If you have other managed network hardware, such as network switches, unplug that hardware. Unmanaged devices can be left powered on, but use your judgment if you think these might be part of the problem.
Don’t use a button labeled Reset or Restart, since these likely start the factory reset or restore process. A clearly labeled power button is probably fine to use, but unplugging removes any doubt.
Wait at least 30 seconds. This time lets the devices cool down and indicates to your ISP, computers, and other devices that the router and modem are offline.
This step may not be necessary if you know what the problem is with the connection. Restart the router and modem when you don’t know what’s wrong.
Plug in the modem. If it doesn’t power on in the first few seconds, press the Power button.
The modem is the device that your connection to the internet attaches to. For example, with cable-based internet service, the modem attaches to the coax cable from outside the home.
Wait at least 60 seconds. During this time, the modem authenticates with your ISP and is assigned a public IP address.
Most modems have four lights: a power light, a received light, a send light, and an activity light. When the first three lights are stable, the modem is fully powered on. If there’s an internet light, wait for it to turn on to confirm that the modem is getting internet from your ISP.
Plug in the router. Some routers may require that you press a Power button. On a combination modem-router, skip this and the next step. The software in that device initiates things in the proper order.
The router is physically connected to the modem, so the device next to the modem is probably the router. Not all routers have an antenna, but many do, so if you see one or more of those, that’s probably the router.
Wait at least 2 minutes. This gives the router time to boot up. It also gives computers, smartphones, and other devices that use the network time to get new private IP addresses assigned by the DHCP service in the router.
If you turned off the power for switches or other network hardware, power those back on. Then, wait a minute. If you have several devices, power them on from the outside-in, based on your network map.
When the router and modem restart, test to see if the problem went away.
It’s not necessary to restart computers and other wireless devices, but you may need to if some of the devices are online and others aren’t. Restart the computer the right way. If restarting isn’t an option, renew your IP address by entering ipconfig /renew in Command Prompt.
If Rebooting Doesn’t Work
If rebooting the router and modem didn’t fix the problem, follow more specific troubleshooting methods for the network or internet issue. If the modem has trouble getting a signal from your ISP (the first three lights aren’t solid), contact your ISP for help. Otherwise, look closer at the network setup inside your home.
Resetting vs. Rebooting
There is a fundamental difference between resetting a router or modem and rebooting one. One is more temporary than the other and both are used for unique purposes.
The directions on this page are for rebooting a modem or router to shut them down and start them back up again without removing any settings or making any changes to the software.
To reset a router or modem is the short version of a factory reset of the device, which means removing the wireless settings and other configurations. Resetting puts the router or modem in its original default state before any changes were made to it, which includes reinstating the default router password, clearing the Wi-Fi password, deleting custom DNS servers, and more.
Reset a modem or router by using the Reset button that’s usually located on the back or side of the device. Find out how to reset a router if you can’t log in with the default password or if there’s a bigger problem with the network hardware that rebooting doesn’t fix.
3 different router reset methods
You may want to reset your network router if you can’t remember the administrator password, you’ve forgotten the network wireless security key, or you’re troubleshooting connectivity issues.
The following process is not the same as restarting a router or modem.
Best Methods for Resetting Routers
Several different router reset methods can be used depending on the situation. Hard resets, power cycling, and soft resets are commonly recommended.
How to Reset a Home Network Router
A hard reset is the most drastic type of router reset and is commonly used when an administrator has forgotten the password or keys and wants to start over with fresh settings.
Some router manufacturers might have a preferred way to reset their router, and some methods to reset a router may differ between models.
Since the software on the router is reset to factory defaults, a hard reset removes all customizations, including passwords, usernames, security keys, port forwarding settings, and custom DNS servers. Hard resets do not remove or revert the currently-installed version of router firmware, however.
To avoid internet connectivity complications, disconnect the broadband modem from the router before performing a hard reset.
To perform a hard reset:
With the router powered on, turn it to the side that has the Reset button. The Reset button is either on the back or the bottom.
With something small and pointed, like a paperclip, hold down the Reset button for 30 seconds.
Release the Reset button and wait 30 seconds for the router to fully reset and power back on.
An alternative method called the 30-30-30 hard reset rule involves holding down the Reset button for 90 seconds instead of 30, and can be tried if the basic 30-second version doesn’t work.
Shutting off and re-applying power to a router is called power cycling. It’s used to recover from glitches that cause a router to drop connections such as corruption of the unit’s internal memory or overheating. Power cycles do not erase saved passwords, security keys, or other settings saved using the router console.
To power cycle the router:
- Turn off the power to the router. Either turn off the Power switch or unplug the power cord.
- On battery-powered routers, remove the battery.
Some people wait 30 seconds out of habit, but it’s not necessary to wait more than a few seconds between unplugging and reattaching the router power cord. As with hard resets, the router takes time after power is restored to resume operation.
When troubleshooting internet connectivity issues, it can help to reset the connection between the router and modem. This may just involve removing the physical connection between the two, not manipulating the software or disabling power.
Compared to other kinds of resets, soft resets take effect almost instantaneously because they don’t require the router to reboot.
To perform a soft reset, unplug the cable that connects the router to the modem, then reconnect it after a few seconds.
Some routers may have a different way to perform a soft reset:
- Look for a Disconnect/Connect button on the console. This resets the connection between the modem and the service provider.
- Open the router console. In the menu, select Restore Factory Defaults or something similar. This feature replaces the router’s customized settings (such as passwords and keys) with the original ones it had at the factory, without requiring a hard reset.
- Find and press the Reset Security button on the Wi-Fi console screen. This will replace the subset of the router’s wireless network settings with the defaults while leaving other settings unchanged. Specifically, the router name (SSID), wireless encryption, and Wi-Fi channel number settings are all reverted.
To avoid confusion around which settings get changed on a security reset, Linksys owners can avoid this option and use Restore Factory Defaults instead.
Replacing the Router
If you’re trying to solve a problem with the router by resetting it, and that didn’t fix the issue, it may be time to replace it with a better router.
Factory resetting a router is usually only necessary for troubleshooting or for if you’re making big changes to your network. It isn’t something to do lightly as it will wipe all your settings and return all the router config to defaults. If you do need to factory reset a Belkin router, this tutorial will show you how to do it.
First let us consider how a router works and what a factory reset will do.
All routers contain hardware similar to a PC but on a much smaller scale. There will be a CPU, memory, network card(s), solid state memory and a power supply. There is no need for a graphics or sound card but the rest is largely the same. Instead of running a Windows or Mac OS, the router will use firmware.
Firmware is a much smaller, tighter version of an operating system that is mostly non-configurable. This allows it to run faster and more reliably as there are fewer options to code and fewer error corrections needed. Those options you can change are limited to outside the core OS such as ports, firewall, network addresses and so on.
The config file is where all those user changes are stored. There is a default config file and a copy that you as the router administrator can modify. All changes are made to this copy with the default remaining untouched.
When the router boots the firmware will read the config file after loading the core to implement the specific configuration options you set. Every time you make a change to a router setting, it is written to the config file and implemented every time the router reboots.
When you perform a factory reset, the working copy of the config file is deleted and replaced with a copy of the default file. All of your changes and network settings are deleted along with it. That’s why a factory reset is a task of last resort.
Factory reset a Belkin router
There are two ways to factory reset a Belkin router, a software reset and a hard reset.
Soft factory reset a Belkin router:
- Log into your router as an administrator through 192.168.2.1.
- Navigate to Administration, select Advanced Settings and select Restore Factory Defaults.
- On some routers, the options are ‘Router Maintenance’ and ‘Settings’. Then you will need to select Reset Belkin Router instead of Factory Restore.
- On other Belkin models, the options are Utilities and Restore Factory Defaults or Restart Router.
- Confirm your choice and allow the router to reboot and restore factory settings.
Hard factory reset a Belkin router:
- Turn the router around so you are looking at the back.
- Either press the reset button or use a thin implement to press the recessed reset button for around 20 seconds.
- Allow the router to reboot and reload the default config. This should take around 1 minute.
- Reset your modem once the router has rebooted.
Remember, once you factory reset your Belkin router, the password you were using will no longer work. You will need to log in using the default username and password and change the password to something more secure. Do this immediately.
Default logins for Belkin routers are usually admin or Admin for the username and either admin, password or nothing for the password.
Updating firmware after a factory reset
It is always a good idea to look for a firmware update when you perform a factory reset. Router manufacturers regularly offer updated firmware for their routers as they develop new features, fix bugs or improve the code. After a factory reset, log into your router and select Firmware Update. Allow the router to search for updated firmware and download if it finds some.
Sometimes it can be months between updates so don’t worry if your router cannot find one. You can either leave the current firmware alone or check manually on the Belkin website for any new firmware.
First config changes
Once you have factory reset your Belkin router, you should log in and make some changes. Some are essential, some are optional.
- Change the login name and password. You may not always be able to change the login name, but always change the password to something more secure.
- Change the SSID (optional) so your devices can better recognize your wireless network.
- Change the default wireless password to something secure.
- Turn off the Guest Network unless you’re going to use it.
- Change the wireless channel (optional) to a less congested one, most people leave it at defaults, so the airwaves at other frequencies are usually clear.
- Change the DNS servers to Google (188.8.131.52 and 184.108.40.206) or OpenDNS (220.127.116.11 and 18.104.22.168) – (optional).
So now you know how to factory reset a Belkin router. It is a painless process but does take a little while to reconfigure the router again unless you made a backup of the config. Hope it helps!
To reset a Cisco router to factory default (removing the startup configuration file), perform these steps:
1.To erase the configuration file, issue the erase nvram: command. Reload the router by issuing the reload command.
2.If this does not solve the problem, attempt to break into ROM Monitor (ROMmon) by issuing the break sequence (usually Ctrl and break from the Hyperterminal) from a console connection.
Refer to: Cisco Standard Break Key Combinations. You should see this ROMmon prompt:
3.Change the configure register value to ignore the startup configuration by issuing the confreg command, as shown in this example:
4.To reload the router, issue the reset command, as shown in this example:
5.After the router boots, issue the enable command at the Router > prompt. The prompt changes to Router#, indicating that the router is now in privileged mode.
6.To enter config mode, issue the config terminal command. You should now see a Router(config)# prompt.
7.To change the configure register to recognize the startup configuration, issue the config-register command, as shown in this example:
Router (config)# config-register 0x2102
To break out of configuration mode, press Cntl and Z. To save the blank configuration, issue the copy-running config-startup config command.
- Track Order
- ‘ title=”My Services” ha-id=”me_click_my_service” href=”https://consumer.huawei.com/sa-en/support/user-center/?type=service”> My Services
- ‘ title=”My information” ha-id=”me_click_personal_info” href=”https://consumer.huawei.com/sa-en/support/user-center/?type=userinfo”> My information
- Track Order
- Asia Pacific
- Latin America
- Middle East
- North America
How do I restore my router to its factory settings?
|How do I restore my router to its factory settings?|
If you forget the login password for the router’s web-based management, use Method 1 to restore your router to factory settings.
If you cannot access the web-based management page, use either Method 1 or Method 2 to restore your router to factory settings.
If you want to re-configure your router or lend your router to someone else, you can use any of the following three methods to restore your router to factory settings.
If your router is restored while the Retain key settings option is enabled, key information such as Wi-Fi name and password will be retained. Nevertheless, after your router is restored, you would still need to complete the configuration process before you can access the Internet.
Method 1: Through the router’s RESET button
Power on your router and wait until the startup process completes. Using a pin, press the RESET button on the router for approximately 2 seconds until the indicator lights go out. Once your router restarts and the indicator turns red, its factory settings are restored.
Method 2: Through the HUAWEI SmartHome app
- Connect your phone to the router’s Wi-Fi network.
- Open the HUAWEI SmartHome app on your phone, and go to Tools > Advanced settings > Device > Factory reset.
- Select whether you want to save your network settings and touch the FACTORY RESET button.
Method 3: Restore your router through the web-based management page
- Connect your computer to the router’s Wi-Fi (or to the router’s gray network port (LAN port) using an Ethernet cable). In the browser address bar, enter 192.168.3.1 to log in to the router’s web-based management page.
For routers that feature self-adaptive ports, you do not need to distinguish between WAN and LAN ports.
Resetting a home router will restore it to the condition it was in when you bought it and can help clear some networking issues.
Most routers’ web interface keeps the reset function in the same area where you can backup/restore its settings.
Just to be be clear: resetting your router is different from restarting your router. A router reset will allow you to set it from scratch where it will work at optimal levels. Do this when you feel you’re having issues with your network or after you’ve upgraded your internet speed and don’t seem to get the speed that you’re supposed to get. It’s also the only way you can re-gain access to a router’s web interface once you’ve forgotten the password (the password will then be restored to the default password.)
It’s important to note that when you reset your home router you will lose all of your current network settings, like the name of the Wi-Fi network, its password, etc. (So don’t do this just for fun!) If you want to retain the current network settings, you should first log into the router’s web interface and save the current settings to a file (most routers will have this setting in the web interface). While in the interface, you can choose to reset the router via its web interface using a function called Reset or Restore, which restores the router to its factory default condition.
The reset button is almost always on the back or underside of a router.
The most universal way to reset a router, however, is via the reset button, usually found on the router’s back or underside. This button is almost always recessed but you should be able to access it with a straightened-out paper clip.
To reset, make sure the router is turned on, press and hold the reset button for 10 seconds, then release it. The router will then restart in the factory default setting. Now you can proceed with setting it up like you did when you first got it or, if you saved the settings, restore them from a file.
By the way, don’t reset your modem, that’s the job of your internet service provider. On most router/modem combos, the reset button will only reset the router portion of the device.