Categories
Design

How to restore previous versions of the registry in windows 7

To go back in time and save your files, you can restore previous version in Windows 7 via Windows built-in feature or AOMEI Backupper Standard. Let’s use them.

How to restore previous versions of the registry in windows 7

By Yuka / Last update January 14, 2019

The case: restore folder to the previous version

“Does anyone know how I can restore a folder to a previous version? I have gone through a process I followed from a YouTube video which takes me to an error message saying I do not have the correct permissions and I need to contact the administrators. It’s a folder that contained some old photos I am keen to try and get back. Thanks in advance I am not very good with computers.”

Have you heard about the previous versions feature in Windows 7? Previous versions are copies of files/folders that Windows automatically saves as a part of a restore point. This feature was first provided by Vista’s Business, Ultimate and Enterprise versions, but now is available to all Windows 7 users.

File modification and deletion are very common in everyday life. It is not a good idea to rewrite files when you can’t find your files in your PC or you accidently modified or deleted files. Fortunately, you can restore previous version in Windows 7. This practical feature can help you restore files to the older versions.

How to restore previous version of file in Windows 7?

You will find a lot of ways to restore previous version in Windows 7 by searching Google. After testing, the two most effective methods have emerged. Let’s learn these two solutions with detailed demonstrations.

Restore previous version of files with Windows built-in feature

To restore with previous version, you must turn on system protection. Otherwise, Windows can’t create previous versions. If you don’t know how to turn on this feature, you can refer to the steps below.

Step 1. Click the Start tab in the lower left corner of your PC. Type Control Panel in the search box and then open it.

Step 2. Select System and Security from the list. Then click System.

Step 3. Select System protection from the left pane. Click the drive where your files are stored. Then click Configure.

Step 4. Click Restore system settings and previous versions of files. Then choose OK.

Detailed steps of recovering files to the previous version with Windows built-in feature

Suppose you have a file called Text File. Now, you can restore previous version in Windows with the detailed instructions below.

Step 1. Right click the file. Then choose Restore previous versions.

How to restore previous versions of the registry in windows 7

Step 2. All previous versions of this file will be listed in this interface. Then select the version you want to view or restore from. You can click Open to view it to make sure it’s the version you want.

How to restore previous versions of the registry in windows 7

Step 3. If everything is correct, you can click Restore.

How to restore previous versions of the registry in windows 7

Notes:

The current version of the file will be replaced and the replacement cannot be undone.

You can create a copy of the selected version by clicking Copy in Step 3.

For a single file you can use this simple method. For a large number of files, this method is time consuming. Moreover, many users mentioned that the previous versions feature in Windows 7 is not working. Whenever they open this feature, it will say “there are no previous versions available”. Is there a reliable alternative? Don’t worry! Here’s another solution for you.

Restore files to the previous version using professional recovery freeware

Fostering a good habit of backing up is fairly important for disaster recovery. AOMEI Backupper Standard is another good choice for you. With this freeware, you can restore deleted files or modified files to the previous version easily.

This recovery software supports files in various formats and sizes. It also enables you to recover deleted files from PS4, restore files from formatted SD card, and recover lost files, etc.

If you want to restore parts of the files in an image file, you can make a selective file restore with this freeware. Besides, the simple interface and easy steps make your restoration effortless. You can download this freeware (supports Windows 10/8.1/8/7, Windows Vista and Windows XP) to restore previous version in Windows 7.

Now, you can follow the detailed steps below to recover files to the previous version. The good news is that you also can restore previous version in Windows 10 via these operating steps. Before retrieving, you must have a file backup in advance.

Step 1. Install and open this freeware.

How to restore previous versions of the registry in windows 7

Step 2. Choose Restore from the left side. Select the files backup (My File Backup) from the list. Then click Next.

How to restore previous versions of the registry in windows 7

Step 3. Select a Backup Point to restore. Then click Next.

How to restore previous versions of the registry in windows 7

Step 4. You can restore files from the location where you backed up files (here is C:). Then click Next.

How to restore previous versions of the registry in windows 7

Step 5. You can choose Restore to original location or Restore to a new location according to your needs. Then click Start Restore.

How to restore previous versions of the registry in windows 7

Notes:

In Step 5, Restore NTFS permissions can maintain the original permission rights for the files. Remember that NTFS permissions can only be retrieved to NTFS formatted drives. You can upgrade to the advanced version to enjoy this function.

If you want to overwrite existing files, you can click Replace existing files in Step 5.

Summary

How to save a file that was deleted or modified by mistake? Windows built-in feature and AOMEI Backupper Standard can help you restore previous version in Windows 7. You can choose one way based on your own situations.

It is suggested to use AOMEI Backupper Standard, because it provides more advanced settings. If you want to restore previous version in Windows Server, you can use AOMEI Backupper Server.

Windows 10, 8.1, or 8

Back up the registry manually, or create a system restore point.

From the Start menu, type regedit.exe in the search box, and then press Enter. If you are prompted for an administrator password or for confirmation, type the password or provide confirmation.

In Registry Editor, locate and click the registry key or subkey that you want to back up.

Click File > Export.

In the Export Registry File dialog box, select the location to which you want to save the backup copy, and then type a name for the backup file in the File name field.

From the Start menu, type create a restore point.

Select Create a restore point from the search results.

Choose Create, and then follow the steps to create a restore point.

After you’ve backed up the information, restore it based on the method you used.

From the Start menu, type regedit.exe, and then press Enter. If you are prompted for an administrator password or for confirmation, type the password or provide confirmation.

In Registry Editor, click File > Import.

In the Import Registry File dialog box, select the location to which you saved the backup copy, select the backup file, and then click Open.

From Start, type create a restore point.

Select Create a restore point from the search results.

Choose System Restore.

Back up the registry manually, or create a restore point.

Click Start, type regedit.exe in the search box, and then press Enter. If you’re prompted for an administrator password or for confirmation, type the password or provide confirmation.

In Registry Editor, locate and click the registry key or subkey that you want to back up.

Click File > Export.

In the Export Registry File dialog box, select the location to which you want to save the backup copy, and then type a name for the backup file in the File name field.

Right-click the Start button, then select Control Panel > System and Maintenance > System.

In the left pane, select System protection.

Select the System Protection tab, and then select Create.

In the System Protection dialog box, type a description, and then select Create.

Restore the information based on which backup method you used.

Right-click the Start button, then select Control Panel > System and Maintenance > Backup and Restore.

Select either Restore my files or Restore all users’ files.

In the Import Registry File box, select the location in which you saved the backup copy, select the backup file, and then click Open.

Lowell is the founder and CEO of How-To Geek. He’s been running the show since creating the site back in 2006. Over the last decade, Lowell has personally written more than 1000 articles which have been viewed by over 250 million people. Prior to starting How-To Geek, Lowell spent 15 years working in IT doing consulting, cybersecurity, database management, and programming work. Read more.

If you want to manually restore a specific section of the registry from a previous System Restore snapshot, or access some specific keys from an older version of the registry, you can do so by getting access to those files and then exporting sections from them. Here’s how to do it in Windows 7 or Vista.

Since Windows 7 and Vista utilize Shadow Copy, otherwise known as Volume Snapshot Service, to power the “Previous Versions” feature, there are snapshots of important files taken over time, including registry hives, so we can access the older versions of registry files this way without having to do a full System Restore.

Access Previous Registry Hives from Shadow Copy

Important Note: before we get started, we should really give you a disclaimer: you should not use this technique unless you know what you’re doing and are willing to deal with possible problems, or at least have some good backups of your files. Still here? Read on.

The first thing you’re going to want to do is disable User Account Control, because you can’t really access the folders otherwise. Once you’ve done that and rebooted, open up a new Windows Explorer window and head to the following folder:

Right-click anywhere in the white space area of the folder, choose Properties from the menu, and then click the Previous Versions tab. Once you’re there, double-click the appropriate folder (Hint: Look at the Date modified field to decide which version of the files you want to restore.)

Note: If you’re using Windows Vista Home editions and you want to do this, you’re going to need to use Shadow Explorer to get to these files.

How to restore previous versions of the registry in windows 7

Select the registry hive files you need, and copy them to a folder of your choice.

How to restore previous versions of the registry in windows 7

Click OK when you see the Windows Security prompt.

How to restore previous versions of the registry in windows 7

And now you should have a folder containing the backup registry keys.

How to restore previous versions of the registry in windows 7

Now that you have the backup versions of the registry, you can use them to access the older version.

Loading a Registry Hive and Accessing Specific Keys

At this point you can load the entire registry hive into the registry, which will make it a sub-key of one of the main sections, and allow you to access settings from the older version. Open up the Registry Editor using regedit.exe in the Start Menu search or run boxes, click on HKEY_LOCAL_MACHINE or HKEY_USERS, and then use File –> Load Hive.

How to restore previous versions of the registry in windows 7

You’ll be prompted to give the new hive a name—for this example I just used test.

How to restore previous versions of the registry in windows 7

And just like that, you can see the new key with the contents from last week’s backup copy. So, for instance, if one of the settings or license keys for an application was lost, we can find it by browsing through the keys for that application. You’ll have to manually make the changes if you’re doing just a few keys.

How to restore previous versions of the registry in windows 7

If you are trying to use this method to restore large chunks of the registry, you can export a key, modify the exported file to have the correct key path instead of Test, and then import it again. It’s a bit of a pain, but might be helpful if you need to.

Once you’re done, you should make absolutely certain to delete this entire key, or else it’s going to add a lot of extra bloat to your registry that you really don’t need.

Access the Previous Version’s Registry Keys Through the Command Line

Instead of loading the registry key using the GUI and adding all those keys to your current registry, you can use the RegFileExport tool from Nirsoft to access and extract the data from the backup files directly—you’ll just need to know the exact key that you’re looking for

So, for example, if you wanted to access the list of currently installed programs from the Programs and Features dialog. You’d run a command like this against the saved backup copy of the SOFTWARE registry hive—assuming you have the command-line application in the same directory as the backup file:

regfileexport SOFTWARE ExportedKey.reg “HKEY_LOCAL_MACHINE\SOFTWARE\
Microsoft\Windows\CurrentVersion\Uninstall”

How to restore previous versions of the registry in windows 7

This will generate a regular .reg file that you can either double-click to enter the contents into the registry, or you can open it up and find specific keys that you might want to use.

How to restore previous versions of the registry in windows 7

This method can actually be used to easily restore sections of the registry, should you need to. It’s probably most useful for restoring the sections pertaining to a specific application.

Again, you should be very careful when editing the registry, but at least you know a lot more than you did before.

Find your information online

  • HOME
  • Country Code
  • Windows Explorer
  • About me
  • Phone
  • Sport News
  • Artistic
  • News Politics
  • US News

Wednesday, 6 October 2010

How to Restore Previous Versions of the Registry in Windows 7

If you want to manually restore a specific section of the registry from a previous System Restore snapshot, or access some specific keys from an older version of the registry, you can do so by getting access to those files and then exporting sections from them. Here’s how to do it in Windows 7 or Vista.

Since Windows 7 and Vista utilize Shadow Copy, otherwise known as Volume Snapshot Service, to power the “Previous Versions” feature, there are snapshots of important files taken over time, including registry hives, so we can access the older versions of registry files this way without having to do a full System Restore.

Access Previous Registry Hives from Shadow Copy

Important Note: before we get started, we should really give you a disclaimer: you should not use this technique unless you know what you’re doing and are willing to deal with possible problems, or at least have some good backups of your files. Still here? Read on.

The first thing you’re going to want to do is disable User Account Control, because you can’t really access the folders otherwise. Once you’ve done that and rebooted, open up a new Windows Explorer window and head to the following folder:

Right-click anywhere in the white space area of the folder, choose Properties from the menu, and then click the Previous Versions tab. Once you’re there, double-click the appropriate folder (Hint: Look at the Date modified field to decide which version of the files you want to restore.)

Note: If you’re using Windows Vista Home editions and you want to do this, you’re going to need to use Shadow Explorer to get to these files.

How to restore previous versions of the registry in windows 7

Select the registry hive files you need, and copy them to a folder of your choice.

How to restore previous versions of the registry in windows 7

Click OK when you see the Windows Security prompt.

How to restore previous versions of the registry in windows 7

And now you should have a folder containing the backup registry keys.

How to restore previous versions of the registry in windows 7

Now that you have the backup versions of the registry, you can use them to access the older version.

Loading a Registry Hive and Accessing Specific Keys

At this point you can load the entire registry hive into the registry, which will make it a sub-key of one of the main sections, and allow you to access settings from the older version. Open up the Registry Editor using regedit.exe in the Start Menu search or run boxes, click on HKEY_LOCAL_MACHINE or HKEY_USERS, and then use File –> Load Hive.

How to restore previous versions of the registry in windows 7

You’ll be prompted to give the new hive a name—for this example I just used test.

How to restore previous versions of the registry in windows 7

And just like that, you can see the new key with the contents from last week’s backup copy. So, for instance, if one of the settings or license keys for an application was lost, we can find it by browsing through the keys for that application. You’ll have to manually make the changes if you’re doing just a few keys.

How to restore previous versions of the registry in windows 7

If you are trying to use this method to restore large chunks of the registry, you can export a key, modify the exported file to have the correct key path instead of Test, and then import it again. It’s a bit of a pain, but might be helpful if you need to.

Once you’re done, you should make absolutely certain to delete this entire key, or else it’s going to add a lot of extra bloat to your registry that you really don’t need.

Access the Previous Version’s Registry Keys Through the Command Line

Instead of loading the registry key using the GUI and adding all those keys to your current registry, you can use the RegFileExport tool from Nirsoft to access and extract the data from the backup files directly—you’ll just need to know the exact key that you’re looking for

So, for example, if you wanted to access the list of currently installed programs from the Programs and Features dialog. You’d run a command like this against the saved backup copy of the SOFTWARE registry hive—assuming you have the command-line application in the same directory as the backup file:

regfileexport SOFTWARE ExportedKey.reg “HKEY_LOCAL_MACHINE\SOFTWARE\
Microsoft\Windows\CurrentVersion\Uninstall”

How to restore previous versions of the registry in windows 7

This will generate a regular .reg file that you can either double-click to enter the contents into the registry, or you can open it up and find specific keys that you might want to use.

How to restore previous versions of the registry in windows 7

This method can actually be used to easily restore sections of the registry, should you need to. It’s probably most useful for restoring the sections pertaining to a specific application.

Again, you should be very careful when editing the registry, but at least you know a lot more than you did before.

Update: Make sure to check out our updated article: How to Manually Backup and Restore the Windows Registry

The Registry is where all of the magic happens in Microsoft Windows. It’s the database and hierarchical structure that stores all of Windows settings for the OS and most installed 3rd party applications. Windows can’t operate without it. Keeping the registry healthy and clean is pretty much a no-brainer, but in many ways, it’s like doing brain surgery on a patient. Make one wrong move (or edit), and it’s game over for your entire system.

Although there is no substitute for a solid backup plan, it’s still a good idea to protect your system by creating a backup of your registry before making any changes to it. Let’s take a look at how you can do that.

How to Backup the Microsoft Windows Registry

1. Click the Windows Start Menu Orb and then Type regedit into the search box. Once the program link appears, Press Enter.

How to restore previous versions of the registry in windows 7

To get there in Windows 10, click Start and type: regedit and hit Enter or select regedit from the top of the search results. In Windows 10, you don’t need a search box. Just start typing – it’s a time saver.

How to restore previous versions of the registry in windows 7

2. In Registry Editor, Click File > Export.

How to restore previous versions of the registry in windows 7

3. In the export window, Type in a file name for your backup. I’d suggest including today’s date in the file name for easy reference. At the bottom of the export window, you have two options under Export Range.

  • All : this will backup the ENTIRE registry.
  • Selected Branch : this will only backup the registry key you had selected and all subkeys within it.

Once you’re ready, click Save.

How to restore previous versions of the registry in windows 7

4. After you click Save, it can take a few minutes to back up the registry. You may even see a “Not Responding” error in the window, but don’t worry, be patient. It will finish and then be back to normal.

How to restore previous versions of the registry in windows 7

That covers backing up the registry. But what’s the next step if you need to use one of your backups? Let’s take a look.

How to Restore a Registry Backup

Option 1

The first, easiest, and fastest way to restore registry information is to Merge it. Just navigate to the file in Windows and then Right-Click the registry file and select Merge.*

*You can also Double-Click the registry file to merge it.

When the confirmation window appears, click Yes.

How to restore previous versions of the registry in windows 7

Just give it a moment, and the registry will apply the changes based on the keys stored in the registry file you just merged.

Option 2

Another way to restore registry information is to use the Import tool. Just open up regedit from the Start Menu like above (see Step #1) and then Click File > Import.

How to restore previous versions of the registry in windows 7

Once the import dialog appears, you can select the registry file you want to restore and then Click Open.

How to restore previous versions of the registry in windows 7

Now you know how to backup and restore the Windows 7 and Vista registry. This trick will come in handy before making any significant registry changes or installing “pre-made” fixes from the Internet. Be sure to backup your registry.

– Last updated on July 5, 2017 by VG

Recently an AskVG reader “Arun” asked us how to remove “Restore Previous Versions” option from the context menu (right-click menu)? In Windows, when you right-click on a file, folder or drive, you get “Restore Previous Versions” option in the context menu as shown in following screenshot:

How to restore previous versions of the registry in windows 7

If you select this option, it opens that item’s properties box where “Previous Versions” tab is selected:

How to restore previous versions of the registry in windows 7

This feature is a part of “File History” service present in Windows which helps users in recovering accidentally lost files by copying them to/from a selected backup location.

If you don’t want this feature, you can turn it off by disabling “File History Service” in Services Manager (services.msc) . But even after disabling the service, the context menu option “Restore Previous Versions” remains enabled. Also the tab “Previous Versions” remains available in the properties window.

Today in this tutorial, we’ll tell you how to remove the “Restore Previous Versions” option from context menu and “Previous Versions” tab from properties window.

If you also want to get rid of this option and tab, following steps will help you:

1. Press “WIN+R” key combination to launch RUN dialog box then type regedit and press Enter. It’ll open Registry Editor.

2. Now go to following keys one by one:

3. For all above mentioned keys, under shellex key, you’ll find following 2 sub-keys:

The ContextMenuHandlers key contains entries of options which are shown in the right-click context menu. The PropertySheetHandlers key contains entries of tabs which are shown in properties window.

4. The key which is responsible for showing “Previous Versions” option in context menu and properties window is .

So if you want to remove the “Restore Previous Versions” option from context menu, delete the key present under ContextMenuHandlers key for all keys mentioned in Step 2.

And if you want to remove the “Previous Versions” tab from properties window, delete the key present under PropertySheetHandlers key for all keys mentioned in Step 2.

How to restore previous versions of the registry in windows 7

That’s it. Once you delete the <596AB062-B4D2-4215-9F74-E9109B0A8153>key from registry, it’ll immediately remove the “Restore Previous Versions” option from context menu and “Previous Versions” tab from properties window.

PS: If you decide to restore the context menu option or properties window tab in future, simply create the <596AB062-B4D2-4215-9F74-E9109B0A8153>key again under ContextMenuHandlers and PropertySheetHandlers keys.

NOTE: If you are not familiar with Registry editing and want a ready-made Registry script to do the task automatically, download following ZIP file, extract it and run the extracted REG file. It’ll ask for confirmation, accept it:

The ZIP file also contains a restore registry script to restore the context menu option and properties window tab.

I just realized that pretty much everybody in our company can use ‘restore’ in the previous versions on my network shares. Since I prefer not to turn off shadow copies altogether, I’m hoping for a way to only disable the ‘restore’-button. So my users could still open previous versions and copy single files or the whole directory to a different place.

I was looking for group polices, but I couldn’t find anything.

Popular Topics in Windows 7

They only can restore there own share right?
So it’s a bit on there own risk. But I understand your point.

8 Replies

They only can restore there own share right?
So it’s a bit on there own risk. But I understand your point.

No, they can also restore the department shares. I wouldn’t worry about the home directories, but if somebody restores a four months old department share I wouldn’t be too happy.

This works great!

I see. No then I wouldn’t be happy also.

Glad I could help!

This includes the same registry hack as above but with a bit more besides – you need to scroll down a bit to get to the good stuff from TBoneJones,

Would definately go with this as a Group Policy setting.

This worked really well for me.

How to Configure Previous Versions with Group Policy Settings

I hope this helps

This GPO is a much better solution.

  • local_offer Tagged Items
  • calgarytech

This topic has been locked by an administrator and is no longer open for commenting.

To continue this discussion, please ask a new question.

    How to restore previous versions of the registry in windows 7

It Comes Down to This.

32+ years in IT at all levels, and the job search returns this as my best matchJust wow. Way to validate my existence.

How to restore previous versions of the registry in windows 7

Snap! Microsoft Build, DuckDuckGo, Windows File Explorer, happy Geek Pride Day!

Your daily dose of tech news, in brief. Happy Geek Pride, Towel, & Lilac Day! Not sure what that is? Then make sure to read the last story on here! You need to hear this. Microsoft shows off Windows updates at Build dev event Microsoft Bui.

How to restore previous versions of the registry in windows 7

Broadcom buying Vmware?

If this happens how will it affect us users?

How to restore previous versions of the registry in windows 7

Spark! Pro series 25th May 2022

Today in History: 1945 Arthur C. Clark proposes relay satellites in geosynchronous orbitArthur Charles Clarke was born on 16 December 1917 in Minehead, Somerset, United Kingdom. During the Second World War he was involved in developing the new technology .

When Windows 10 have some problems with registry files/settings (in case of corruption, accidental deletion, etc.), the system offers a simple way to restore the registry settings from the automatically created backup. In this guide, we will show how to restore Windows 10 registry from a backup or system restore point (VSS snapshots) that were created earlier.

Regback. How to Restore Registry from Backup in Windows 10?

The system automatically saves a Windows 10 backup copy of some registry hives to the folder %windir%\System32\config\RegBack.

How to restore previous versions of the registry in windows 7

Each registry hive is stored in a separate file. There are 5 files total in this location (in parentheses indicate the registry hive that is stored in a file):

  • DEFAULT (HKEY_USERS.DEFAULT)
  • SAM (HKEY_LOCAL_MACHINE\SAM)
  • SOFTWARE (HKEY_LOCAL_MACHINE\Software)
  • SECURITY (KEY_LOCAL_MACHINE\Security)
  • SYSTEM (HKEY_LOCAL_MACHINE\SYSTEM)

Note. Please note that the user’s registry hives are not backed up automatically. These hives are stored in each directory with a user profile in the NTUSER.DAT and USRCLASS.DAT files and you need to make copies by yourself.

Accordingly, to restore the registry in Windows 10, you need to copy the files from the RegBack folder (where they are usually updated after updates that affect the registry) to the folder %windir%\System32\Config.

How to restore previous versions of the registry in windows 7

Registry hives backup copies are created by a separate task RegIdleBack from the Automatic Maintenance subsystem. By default, a registry backup is created every 10 days or when installing system updates, drivers, or programs. To find a task that is responsible for backing up the registry, open the Windows Scheduler (Taskschd.msc). In the Task Scheduler console, go to the section Task Scheduler Library > Microsoft > Windows > Registry.

As you can see, the RegIdleBack task is active (Ready) and the last time completed successfully (Last Run Result: The operation completed successfully – 0x0).

You can run this task manually by right-clicking on the task name and select Run.

If your Windows 10 is turned on (online), you can’t replace the original registry files in the %windir%\System32\Config since they are locked by the operating system. However, you can use the registry recovery procedure when your Windows is not booting properly in normal mode. In this case, you can replace the damaged registry files from the WinPE command prompt by booting your computer in the Windows 10 recovery environment or from Windows 10 installation media.

Restoring Registry Backup Task in Windows 10 1803 and Higher

Starting from Windows 10 1803 (and in all newer Windows 10 builds: 1809 and 1903), the task of automatically creating registry backups by default doesn’t work like before. The C:\Windows\System32\Config\RegBack directory is empty, or contains hive files with the size of 0 bytes. What is interesting is that the task RegIdleBackup is active and successfully performed according to the schedule.

According to the comments of Microsoft employees, the automatic backup task was disabled to save space. It also allows you to extract old versions of registry hives from system recovery points (if they are enabled).

You can enable automatic registry backups to the RegBack folder using the registry. To do this:

  • Open the Registry editor regedit.exe;
  • Go to the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Configuration Manager;
  • Create a new DWORD parameter named EnablePeriodicBackup with the value 1;
  • Close the registry editor and restart the computer. The next time you start automatic system maintenance (if you did not disable it), the copies of registry hives will also be created. To start a task manually, run the command:

Tip. You can also make changes to the registry with the command:

You can also use your own scheduler task (with schtasks ) to backup the Windows registry keys to a separate directory (you can also place backup on a separate disk) using the commands:

You can manually back up important registry hives or make a full registry backup. Select the required registry hive (or select the registry root), and select Export from the context menu. Specify the name of the reg file in which you want to save your registry.

How to restore previous versions of the registry in windows 7

Restore Windows 10 Registry from Command Prompt

To open the command prompt, boot your PC in recovery mode. To do this you need to interrupt a normal boot of your computer 3 times in a row using the Power button. Then select Troubleshoot > Advanced Options > Command prompt.

Also to open the command prompt, you can boot your PC from Windows 10 distribution DVD disk or flash drive. On the first installation screen press Shift + F10 (for some laptops Shift + Fn + F10).

Your system drive assigned a letter in the WinPE recovery environment may be different from C:\. To find out what drive letter is assigned to your system partition, enter one by one the following commands:

How to restore previous versions of the registry in windows 7

You can easily detect your system partition by the large disk size. In our case, it’s the drive with the letter D:\ (volume 2).

Now use Command prompt to restore the registry from backup:

Confirm the replacement of files using key A.

After the command execution finishes, all the registry files will be replaced with their backup copies. You can close the Command prompt, and reboot the computer to see whether the operability of Windows 10 has been restored.

If the registry files in the backup are corrupted, you can try to manually restore the older version of the registry files from a System Restore point.

Boot into WinPE environment as described earlier and go to the windows\system32 directory:

Display a list of all available restore points using the command:

How to restore previous versions of the registry in windows 7

In this example, the last shadow copy has taken 10/20/2016 4:02:40 AM, and has a Shadow Copy Volume path ?GLOBALROOT\Device\HarddiskVolumeShadowCopy6.

Mount the restore point (snapshot) in the Read-only mode to the folder d:\ShadowCopy using the mklink tool:

How to restore previous versions of the registry in windows 7

Now you can access files stored in the shadow volume. Simply copy and replace registry files using the following commands:

Reboot your computer, and you’ve successfully Restore Windows 10 Registry. Hope this was useful!

How to restore previous versions of the registry in windows 7

In Microsoft Windows, the registry contains important operating system and application configuration. Follow these steps to back up and restore the registry in your version of Windows.

  • Windows 10 and 8 users.
  • Windows 7, Vista, and XP users.
  • Windows 2000 users.
  • Windows ME users.
  • Windows 98 users.
  • Windows 95 users.

Windows 10 and 8 users

Follow these steps to back up and restore the registry in Windows 10 or Windows 8.

Backing up the Windows 10 and 8 registry

Windows 8 and 10 include the System Restore feature, allowing the user to back up their Windows operating system and create restore points to restore the system files back to an earlier date. By default, System Restore automatically creates a backup of the operating system files when a change is made (i.e., installation of software or a Windows update). However, you can manually create a restore point at any time by following the steps below.

  1. For Windows 8, type restore while on the Start Screen. For Windows 10, click Start and type restore.
  2. In the search results, click the Create a restore point option.
  3. In the System Properties window that opens, click the Create button.
  4. Enter a brief description of the restore point you are creating and click Create.

Restoring the Windows 10 and 8 registry

To restore the system back to an earlier point, follow the steps below.

  1. For Windows 8, type restore while on the Start Screen. For Windows 10, click Start and type restore.
  2. In the search results, click the Create a restore point option.
  3. In the System Properties window that opens, click the System Restore button.
  4. Select the Recommended restore option or the Choose a different restore point option, and click Next.
  5. Follow the remaining steps to activate the selected restore point.

Windows 7, Vista, and XP users

Follow these steps to back up and restore the registry in Windows 7, Vista, or XP.

Backing up the Windows 7, Vista, and XP registry

Microsoft Windows XP, Vista, and 7 include a new feature called System Restore. This great feature enables a user to back up and restore their important system files from an earlier day. By default, this feature automatically creates a backup of the system each day. If you want to create a restore point for your Windows operating system, follow the steps below.

  1. Click Start, Programs, Accessories, System Tools, and System Restore.
  2. Select the option to Create a restore point.
  3. Click Next and follow the remaining steps.

Restoring the Windows 7, Vista, and XP registry

To restore the system back to an earlier point, follow the steps below.

  1. Click Start, Programs, Accessories, System Tools, and System Restore.
  2. Select the Restore my computer to an earlier time option (as shown in the picture below) and click Next.
  3. Select the day and the restore point you want to restore, and then click Next.

How to restore previous versions of the registry in windows 7

Windows 2000 users

Follow these steps to back up and restore the registry in Windows 2000.

Backing up the Windows 2000 registry

The Microsoft Windows 2000 registry can be backed up from the backup utility by following the steps below.

  1. Click Start, Programs, Accessories, and click backup.
  2. In the Backup window, click the Backuptab.
  3. On the Backup tab, check the System State option to create a backup of boot files, COM+ Class registry Database, and the System registry.

Restoring the Windows 2000 registry

If you have created backups using the Microsoft backup utility, you can also restore the registry through this utility.

Windows ME users

Follow these steps to back up and restore the registry in Windows ME.

Backing up the Windows ME registry

Like its predecessor, Microsoft Windows ME includes the Scanreg utility found with Windows 98. This utility automatically makes backups of the registry each time the computer boots.

Restoring the Windows ME registry

To restore an earlier version of the registry, a user can click Start, Run, and type scanreg /restore to restore the registry. If you cannot get into Windows, this can also be done through Windows Safe Mode.

Windows 98 users

Follow these steps to back up and restore the registry in Windows 98.

Backing up the Windows 98 registry

Windows 98 introduced a new utility known as Scanreg, which automatically makes backups of your registry each time you boot up your computer.

The steps listed below for backing up Windows 95 registry also work, but are not necessarily needed unless you want to keep an original elsewhere.

Restoring Windows 98 registry

To restore Windows 98 registry, open an MS-DOS prompt.

At the MS-DOS prompt, type:

Once in the command directory, type:

After entering the command above, the computer restores an earlier version of your registry. Once completed, reboot the computer and this should resolve any issues that may have occurred with your registry.

If you backed up your registry using the Windows 95 steps, use the Windows 95 restore steps to restore the registry.

Windows 95 users

Follow these steps to back up and restore the registry in Windows 95.

Backing up the Windows 95 registry

The Windows 95 registry is stored in two files: user.dat and system.dat. To backup the Windows 95 registry, manually restart the computer to an MS-DOS prompt and follow the steps below.

Type cd\windows and press Enter .

At the C:\Windows> prompt, type the following commands.

The commands above copy the registry files to a backup directory in your Windows directory. This directory can be substituted for any directory or any other drive.

In many cases, the registry cannot be copied to a single floppy diskette because it exceeds the standard size of a floppy.

Restoring the Windows 95 registry

If you made a backup of user.dat and system.dat in the past and verified they still exist, follow the steps below to restore your Windows 95 registry.

First, get the computer to an MS-DOS prompt.

Once at the MS-DOS prompt, type cd\windows and press Enter .

Once in the Windows directory, type the following commands.

Once these files are deleted, type cd\windows\backup and press Enter . Once in the “windows\backup” directory, type the commands below. If you have changed the location of where your registry is backed up, you need to change to the directory containing the backup.

The commands above should copy two files; once copied, reboot the computer to get back into Windows.

How to restore previous versions of the registry in windows 7

The System Restore allows you to roll back the state of their system files and settings. This action helps fix poor performance or software errors and does not erase any of your data, like pictures or music. However, it may delete settings or drivers implemented after the restore point was created. To proceed, select your version of Windows and follow the steps.

  • Windows 11
  • Windows 10
  • Windows 8
  • Windows 7
  • Windows Vista
  • Windows XP
  • Other issues

How to do a System Restore in Windows 11

  1. Press the Windows key , type restore point, and then press Enter .
  2. At the top of the System Properties window that opens, on the System Protectiontab, click the System Restore button.

    In the System Restore window that opens, the date of the most recent change or update to your computer is recommended, by default. If you want to restore Windows to that date, click the button.

Alternatively, if you know the date your problem started, select the Choose a different restore point option and click the button. Select a restore point and click again.

  • Click the button to start the restore process.
  • How to do a System Restore in Windows 10

    1. Press the Windows key , type Create a restore point, then press Enter .
    2. At the top of the System Properties window that opens, on the System Protectiontab, click the System Restore button.
    1. After processing has finished, click the button.
    2. The following screen suggests recent restore points and your last critical update. Choose one and click the button.

    If you know the date your problem started, check the box next to Show more restore points.

    1. Select a restore point and click the button to start the restore process.

    How to do a System Restore in Windows 8

    1. Navigate to the Start Screen and type restore.
    2. Click Create a restore point.
    3. In the System Properties window that opens, in the System Restore section, click the System Restore button.
    4. After processing, a window appears with two buttons at the bottom; click Next.
    5. The following screen usually suggests a recent restore point and your last critical update.

    If you know the date your problem started, check the box next to Show more restore points.

    1. Select a restore point and click Next.
    2. Confirm your restore point and click Finish to start the restore process.

    How to do a System Restore in Windows Vista and 7

    1. Click Start.
    2. In the Start search box, type System Restore and press Enter .
    3. After processing, a window appears with two buttons at the bottom; click Next.
    4. The following screen usually suggests a recent restore point and your last critical update.

    If you know the date your problem started, check the box next to Show more restore points.

    1. Select a restore point and click Next.
    2. Confirm your restore point and click Finish to start the restore process.

    How to do a System Restore in Windows XP

    1. Click Start.
    2. Click Programs, and then Accessories.
    3. Click System Tools and open System Restore.
    4. After processing, a window appears with two buttons at the bottom. Make sure Restore my computer to an earlier time is selected and click Next.
    5. The next screen suggests a recent restore point and your last critical update.

    If you know the date your problem started, check the box next to Show more restore points.

    1. Select a restore point and click Next.
    2. Confirm your restore point and click Finish to start the restore process.

    What if I can’t find System Restore?

    If you cannot find System Restore and have administrator rights, try opening System Restore through the run line (located in the Start menu) by following the steps below.

    1. Click Start.
    2. Click Run.
    3. Type restore/rstrui.
    4. Press Enter .
    5. Follow steps 4-7 in the previous section.

    Other issues

    Cannot boot to Windows at all

    If you cannot boot to normal Windows mode at all, you may need to run through the following steps in Windows Safe Mode. Additionally, you could try loading the last known good configuration.

    Cannot load in Safe Mode

    If you cannot get to Normal or Windows Safe Mode, restore system registry settings through the Recovery Console.

    No restore points are available

    A computer’s system restore point may get deleted for one of the following reasons. Unfortunately, when the system restore points are deleted or removed, they cannot be recovered.

    1. The Microsoft Windows System Restore option was disabled on the computer.
    2. The computer’s hard drive is low on or out of disk space.
    • How to find how much hard drive space is available.
    1. Microsoft Windows was reinstalled.
    2. The restore point reached its maximum age of 90 days.
    3. The “Cleanup” option in the Disk Cleanup utility was run. When this task is performed, it removes all restore points.
    4. The computer’s copy of Windows was upgraded to a newer version. The Windows System Restore option is not designed to revert your computer to an older version of Windows.

    Last Updated on April 13, 2020 by admin 4 Comments

    Windows 10 is a large operating system with millions of settings in Registry. Every time you install a program or make changes to Windows 10, Windows updates the Registry to reflect the change.

    Here at IntoWindows, we publish tens of guides every month on customizing, tweaking, and optimizing Windows 10 operating system. At times, we ask you to manually edit the Registry to make specific changes to the Windows operating system without the help of third-party tools.

    How to restore previous versions of the registry in windows 7

    Each time, before manually editing the Registry, we recommend you create a manual system restore point so that you can revert to original settings by restoring Windows 10 to a previous date with the help of the previously created restore point. But not all users, not all the time, create a restore point before making significant changes to Registry.

    Why reset the registry in Windows 10?

    If you have turned off restore point for some reason and still want to back up the Registry, you can manually backup the Registry and restore the same when you need it. But what if you have not created a system restore point or Registry backup and now want to reset Registry to default in Windows 10?

    Like earlier versions, Windows 10 also doesn’t offer a way to reset the Registry to default. However, if you have a system restore point with original Registry values, you can use it to reset the Registry to default.

    Likewise, if you have a backup of Registry created with original settings, you can restore or reset the Registry. If you don’t have a previously created system restore point or backup of Registry, then you have two options to reset Registry to default.

    Resetting Windows Registry

    The best way to reset Windows Registry to default is to reset your Windows 10 PC or reset your Windows 10 to factory settings using the built-in Reset PC feature. The Reset PC feature enables you to retain the data when you reset the PC. Only third-party apps and programs will be removed during the Reset operation.

    How to restore previous versions of the registry in windows 7

    For those of you wondering, the reset PC operation resets Registry to default and removes all installed programs. When the Registry is reset to default settings, all Windows 10 settings are automatically set to default. So, in other words, both Resetting registry and resetting Windows 10 PC operations are the same.

    Other than resetting Windows 10 PC, there is no other concrete way out there to reset Windows 10 Registry to default.

    So, if, for some reason, you want to reset the Registry on your Windows 10 PC, simply perform a Reset PC operation.

    If you are trying to recover an older version or restore a previous version of a file or folder in Windows 10/8/7, the solutions here are helpful.

    Table of Contents

    About the Author

    Reviews and Awards

    • о›Ў
    • оІњ
    • о™ћ
    • оњµ

    How to restore previous versions of the registry in windows 7

    Quick steps on how toВ restore a previous version of a file or folder on Windows:

    Right-click the file or folder, and then click Restore previous versions. You’ll see a list of available previous versions of the file or folder. The list will include files saved on a backup (if you’re using Windows Backup to back up your files) as well as restore points.

    Overview

    After editing a Word document or a photo for a while, you’ve made many changes. But later you may regret it, thinking maybe the current edition is not so good as the older one. Then, how to go back or restore the previous version of files or folders?

    The chances of recovering old versions of files are different. Usually, Windows Office supports Ctrl+Z file recovery to undo changes so that you can go back to an earlier modified state for documents, worksheets, or presentations. However, this method doesn’t work for many users, because the files or folders that need to restore are not the versions being changed, but the ones saved a few days ago or even a few weeks ago. So how to recover previous versions of files and folders effectively? Read on to see the guides in-depth.

    How to Restore Previous Version of File in Windows 10

    Previous versions are either copies of files and folders created by Windows Backup or Windows automatically saves as part of a restore point. You can use previous versions to restore files and folders as you want.В

    Step 1. Right-click the file or folder, and then click “Restore previous versions”.

    Step 2. Here, you can see theВ previous versions come from File History or from restore points.

    How to restore previous versions of the registry in windows 7

    Step 3. If you’re lucky enough, a list of older versions of the file will be displayed. Choose the file edition you’re looking for, and click the “Restore” button.

    Some of you would probably find that the place is empty, with no files at all, and Windows says “There are no previous versions available”. Your attempt fails.

    Recover Deleted Previous Version of Files with Data Recovery Software

    If the above method doesn’t work, and you have deleted the previous version of files or folders, how can you restore files? Don’t worry; you still have a great chance to restore the previous version of the file by using reliable and professional data recovery software. EaseUSВ data recovery softwareВ is developed to recover deleted or lost data from HDD, SSD, USB flash drive, Pen drive, external hard drive, CF/SD card, etc.В

    In addition to the deleted file recovery, this data recovery tool is also capable of RAW partition recovery, lost partition recovery, virus attack recovery, recycle bin emptied data recovery, and so on. Now, download EaseUS Data Recovery Wizard, and use it to restore previous versions of files and folders with a few clicks.

    Step 1.В Launch EaseUS file recovery software on your Windows computer. Choose the exact location where you lost theВ files and click the “Scan” button.

    How to restore previous versions of the registry in windows 7

    Step 2.В The software will immediately start scanning the drive, and the deleted files will be displayed soon. If you find the files you need during the scan, you can stop the scan. In order to find the target file quickly, you can use theВ file format filter.

    How to restore previous versions of the registry in windows 7

    Step 3.В Select files, such asВ Word, Excel, PDF, photos, videos, or emails and click the “Recover” button. You can browse for a different location to keepВ the recovered files.

    You can configure Previous Versions with six Group Policy settings, located in Policies \Administrative Templates\Windows Components\Windows Explorer\Previous Versions (under both Computer Configuration and User Configuration):

    • Prevent Restoring Previous Versions From Backups When you enable this setting, the Restore button is disabled on the Previous Versions tab. Users will still be able to see whether previous versions are available (unless you enable the following setting), but the versions will be inaccessible. This setting is disabled by default.
    • Prevent Restoring Local Previous Versions When you enable this setting, the Restore button on the Previous Versions tab is disabled when the file to be restored is a local file. This setting is disabled by default.
    • Prevent Restoring Remote Previous Versions When you enable this setting, the Restore button on the Previous Versions tab is disabled when the file to be restored is on a remote computer. This setting is disabled by default.
    • Hide Previous Versions List For Local Files When you enable this setting, the Previous Versions tab is removed from the file Properties dialog box, and the Restore Previous Versions menu item is removed from the file shortcut menu. This setting is disabled by default.
    • Hide Previous Versions List For Remote Files When you enable this setting, the behavior is the same as with the previous setting, but it affects files on remote computers instead of local files. This setting is disabled by default.
    • Hide Previous Versions Of Files On Backup Location When you enable this setting, previous versions that were created with a backup are hidden. Previous versions created by shadow copies will still be available. This setting is disabled by default.

    Last Known Good Configuration is usually used to enable the operating system to start if it fails after the Starting Windows logo is displayed. Using Last Known Good Configuration helps to correct instability or startup problems by reversing the most recent system, driver, and registry changes within a hardware profile. When you use this feature, you lose all configuration changes that were made since you last successfully started your computer.

    Using the Last Known Good Configuration restores previous drivers and also restores registry settings for the subkey HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet. Windows Vista does not update the LastKnownGood control set until you successfully start the operating system in normal mode and log on.

    When you are troubleshooting, it is recommended that you use Last Known Good Configuration before you try other startup options, such as safe mode. However, if you decide to use safe mode first, logging on to the computer in safe mode does not update the LastKnownGood control set. Therefore, Last Known Good Configuration remains an option if you cannot resolve your problem by using safe mode.

    To access the Last Known Good Configuration startup option, follow these steps:

    1. Remove all floppy disks, CDs, DVDs, and other bootable media from your computer and then restart your computer.
    2. Press F8 at the operating system menu. If the operating system menu does not appear, press F8 repeatedly after the firmware POST process completes but before the Starting Windows logo appears. The Advanced Boot Options menu appears.
    3. On the Advanced Boot Options menu, select Last Known Good Configuration (Advanced).

    Use Last Known Good Configuration to restore some settings to their state during the last time a user successfully logged on.

    When Windows starts, it reads status information from the file %WinDir%\Bootstat.dat. If Windows detects that the last startup attempt was unsuccessful, it automatically displays the startup recovery menu, which provides startup options similar to the Advanced Boot Options menu, without requiring you to press F8.

    Note If you suspect that changes made since you last successfully restarted the computer are causing problems, do not start Windows and log on normally-logging on overwrites the LastKnownGood control set. Instead, restart the computer and use the Last Known Good Configuration. You can also log on in safe mode without overwriting the Last Known Good Configuration. For more information about control sets, see the section titled “Kernel Loading Phase” earlier in this tutorial.

    How to Use System Restore

    If Last Known Good Configuration fails to resolve the problem, you can manually perform a system restore if Startup Repair did not initiate it. However, Startup Repair would typically have taken this step already if it might have solved the problem. For information on how to use System Restore, see the section titled “How to Use System Restore” earlier in this tutorial.

    • By Sofia Wyciślik-Wilson
    • Published 8 months ago

    How to restore previous versions of the registry in windows 7

    Microsoft has made many changes in the move from Windows 10 to Windows 11, and not all of them have proved popular. One of the more controversial changes — at least aesthetically speaking — is the new-look context menu.

    The menu that appears when you right-click on files, folders and the desktop has been given a revamp in Windows 11 and not everyone is happy with it. If you prefer things the way they used to be, there’s a registry hack you can use to tame the context menu.

    See also:

    • Speed up Windows 11 by disabling Virtualization-Based Security (VBS)
    • Windows 11 performance is up to 15 percent slower on some AMD processors
    • This registry hack lets you bypass the TPM 2.0 requirement and install Windows 11

    While some people love the new look, others are less than keen on the fact that the menu is now bigger than before without giving access to any new options. Depending on what you right-click on, some options have been reduced to unlabelled icons, and this has caused a good deal of confusion.

    If you are one of those who prefers the way the context menu looked in Windows 10, use the following registry tweak to change the style.

    1. Press the Windows key and R to activate the Run dialog
    2. Type regedit and press Enter to launch the Registry Editor
    3. Navigate to HKEY_CURRENT_USER \ Software \ Classes \ CLSID
    4. Click Edit >New >Key and create a new key called
    5. With the new key selected, click Edit >New >Key and create a new key called InprocServer32
    6. Select the newly created key and then double click the Default entry in the right-hand pane
    7. Do not type anything, but press Enter (you should notice that the data column changes from (value not set) to simply being blank
    8. Either restart your computer, or just restart the explorer.exe process

    When you right-click, you should now see a context menu that looks more like it did in Windows 10.