How to turn the mouse locator on or off in os x

Here’s how you can turn off OS X El Capitan ‘Shake pointer to locate’ feature in a few simple steps.

How to turn the mouse locator on or off in os x

OS X El Capitan is without a doubt a massive upgrade when you take a peek at all the changes that Apple has slipped in under the hood. From improved performance to adding polish to already-existing features, Cupertino’s latest desktop is a must-have whether you’re a regular user, or a power-user. But despite all those great features, there are some that can prove to be very, very annoying. And one of those features happen to be an addition which allows a user to locate the mouse pointer on the display by giving the pointer a quick shake using the connected mouse or trackpad. While that feature is great to have, but it can get annoying at times, and if you’re looking forward to turning the feature off, then here’s what you need to do.

1. Launch ‘System Preferences.’

2. Now click on ‘Accessibility.’

How to turn the mouse locator on or off in os x

3. Here you’ll see an option labelled ‘Shake mouse pointer to locate.’ Click on it and uncheck it.

How to turn the mouse locator on or off in os x

Once that’s done, whenever you shake your mouse pointer vigorously, you’ll notice that it won’t enlarge to locate itself on the display.

The feature is a wonderful addition if you take into account that you have a multi-display setup up and running on your Mac. In that case, losing the mouse pointer feels like every other day, but with this feature under the belt, locating it is as simple as vigorously moving the pointer on the display.

OS X El Capitan is a highly recommended upgrade even if you’re in the ownership of an old Mac. It comes with a lot of great features that makes using a Mac worthwhile. After all, the upgrade is absolutely free, and if your Mac can run Yosemite, then it definitely can run El Capitan without any sort of problems.

The El Capitan update spans a few gigabytes in size, therefore we recommend you put it overnight on download, ensuring a stable connection with Apple’s servers.

If you happen to find the above jotted tip useful, then be sure to let us know about it in the comments section below. Also check out our top 10 El Capitan tips and tricks post as well if you’re looking to get the most out of Cupertino’s latest desktop OS.

Когда на Mac включена функция «Клавиши управления», можно перемещать указатель мыши и нажимать кнопки мыши с основной или цифровой клавиатуры.

На следующем рисунке показаны клавиши клавиатуры (слева) и цифровой клавиатуры (справа), которые можно использовать при включенной функции «Клавиши управления».

How to turn the mouse locator on or off in os x

Примечание. Когда включена функция «Клавиши управления», с основной или цифровой клавиатуры невозможно вводить текст.

Перемещение указателя мыши.

На цифровой клавиатуре. Используйте клавиши 7, 8, 9, 4, 6, 1, 2, 3 на цифровой клавиатуре.

На клавиатуре. Используйте клавиши 7, 8, 9, U, O, J, K, L.

Нажатие кнопки мыши.

На цифровой клавиатуре. Нажмите клавишу 5 на цифровой клавиатуре.

На клавиатуре. Нажмите клавишу I.

Нажатие и удерживание кнопки мыши.

На цифровой клавиатуре. Нажмите клавишу 0 (ноль) на цифровой клавиатуре.

На клавиатуре. Нажмите клавишу M.

Отпускание кнопки мыши.

На цифровой клавиатуре. Нажмите клавишу «.» (точку) на цифровой клавиатуре.

На клавиатуре. Нажмите клавишу «.» (точку).

Чтобы быстро включить или выключить функцию «Клавиши управления» при помощи панели команд Универсального доступа, нажмите сочетание клавиш Option-Command-F5 (или, если на Вашем Mac или клавиатуре Magic Keyboard есть Touch ID, быстро нажмите Touch ID три раза).

Также можно выполнять действия, обычно выполняемые мышью, например нажатия левой и правой кнопками и двойные нажатия, с помощью сочетаний клавиш на клавиатуре, ассистивных переключателей или мимики. Выберите меню Apple

> «Системные настройки», нажмите «Универсальный доступ» > «Управление указателем» > «Другие способы управления», затем выберите «Включить симуляцию действий курсора». Чтобы настроить действия, нажмите «Параметры».

How do I turn on the X and Y coordinates for the location of the mouse on screen? I have Photoshop CC. I’m creating interfaces and would like to be able to know the location of my mouse.

How to turn the mouse locator on or off in os x

4 Answers 4

Although I can’t currently check as i don’t have photoshop CC on this computer, from past experience if you go

A palette should appear with the coordinates of the cursor in it.

Press F8 to open info palette. That will show your mouse position in x and y coordinates.

You can also press Ctrl + R to view the ruler. Then take the mouse to the top left corner and by dragging from there you can change 0,0 coordinates of x,y position to anywhere on canvas.

when you draw something like rectangle and draw with pressing space bar. It will show lively width height and x y coordinates as well in Photoshop CC

Position with guides and the grid

Guides and the grid help you position images or elements precisely. Guides appear as nonprinting lines that float over the image. You can move and remove guides. You can also lock them so that you don’t move them by accident.

Smart Guides help you align shapes, slices, and selections. They appear automatically when you draw a shape or create a selection or slide. You can hide Smart Guides if you need to.

The grid is useful for laying out elements symmetrically. The grid appears by default as nonprinting lines but can also be displayed as dots.

Guides and grids behave in similar ways:

Show or hide a grid, guides, or smart guides

Remove guides from the image

Set guide and grid preferences

To the top Work efficiently with Smart Guides

Smart Guides come in handy in several scenarios, such as the following:

Distance between the layers: original and duplicate Distance between the layers: original and duplicate

Path measurements Path measurements

Measurement guides while working with layers Measurement guides while working with layers

Distances of a shape from the canvas Distances of a shape from the canvas

Learn how to connect a wired mouse, trackpad, or assistive Bluetooth device to control an onscreen pointer on your iPhone, iPad, or iPod touch.

How to connect your pointer

Plug in your wired mouse, trackpad, eye-tracking device,* or Bluetooth device using a Lightning or USB-C port. If you’re using USB-A devices, you’ll need an adapter.

To connect a Bluetooth device:

  1. Go to Settings > Accessibility, and select Touch.
  2. Select AssistiveTouch > Devices, then select Bluetooth Devices.
  3. Select your device from the list.

* Eye tracking is currently only supported on iPad.

How to turn the mouse locator on or off in os x

How to use your pointer

You can use a pointer to click icons on your screen that you might otherwise tap, or use it to navigate the AssistiveTouch menu. If you want to use an input button to show and hide the menu, go to Settings > Accessibility > Touch > AssistiveTouch, then select Always Show Menu.

With your pointer connected, turn on AssistiveTouch. You’ll see a grey, circular pointer and the AssistiveTouch button on your screen.

Adjust the color, size, or Auto-Hide time on your iPad

  1. Go to Settings > Accessibility.
  2. Select Pointer Control.

The pointer will move as you move your input device.

Adjust the color, size, or Auto-Hide time on your iPhone or iPod touch

  1. Go to Settings > Accessibility and select Touch.
  2. Select AssistiveTouch, then select Pointer Style.

The pointer will move as you move your input device.

Adjust the speed for trackpad or mouse

  1. Go to Settings > General.
  2. Select Trackpad & Mouse.
  3. Adjust the tracking speed.

Change the button assignments

  1. Go to Settings > Accessibility and select Touch.
  2. Select AssistiveTouch > Devices.
  3. Select the name of the device that you’re using.
  4. Select the button, then use the dropdown menu to choose your preferred action for each button.

How to customize your settings

To configure the ability to drag items without holding a button on the input device, enable the Drag Lock function. This will allow you to hold the input key until the item is ready for dragging, then move it to another location without continuing to hold the button. If you click again, it will release the drag locked item.

If you use Zoom with AssistiveTouch, you can change how the zoomed in area responds to the pointer location, just go to Settings > Accessibility > Zoom, then select Zoom Pan. You’ll have these options once you enable Zoom Pan:

  • Continuous: When zoomed in, the screen moves continuously with the cursor.
  • Centered: When zoomed in, the screen image moves when the cursor is at or near the center of the screen.
  • Edges: When zoomed in, the screen image moves the cursor when the cursor reaches an edge.

The Dwell options allow you to perform actions with the pointer without physically pressing buttons. Dwell has settings for Movement Tolerance and the amount of time before a selection action is carried out. When Dwell is enabled, the onscreen keyboard will always appear.

How to use a keyboard to control your pointer

If you’re using a keyboard to control your pointer, you’ll need to enable the Mouse Keys function. Follow these steps:

  1. Go to Settings > Accessibility and select Touch.
  2. Select AssistiveTouch, then select Mouse Keys.

From this screen, you can turn on Mouse Keys by pressing the Option key five times. You can also set your Initial Delay and Maximum Speed settings to determine how the pointer moves when being controlled by keyboard keys.

To type on the onscreen keyboard using Mouse Keys, or with the pointer while a keyboard is connected, enable Show Onscreen Keyboard from Settings > Accessibility > Touch > AssistiveTouch.

How to turn the mouse locator on or off in os x

Have you ever woken your Mac up from sleep, and couldn’t find the mouse pointer among the mess of windows and desktop icons. We’ve all been there before.

Starting with El Capitan, macOS is hoping to help out with that, courtesy of a brand new addition to the operating system. It’s certainly not a headline feature, but macOS can help you quickly locate your mouse or trackpad pointer by simply shaking your mouse or swiping your finger back and forth on the trackpad in quick succession.

Watch our video inside to see how it works. We’ll also show you where to go to disable the feature in System Preferences.

As you can see from the brief video walkthrough, locating your cursor is as easy as shaking your mouse, or swiping quickly back and forth on your trackpad. When you do so, your cursor will enlarge for a second in order to help you find it.

If you don’t care for the new cursor finding ability in macOS, you can always venture over to System Preferences to disable the effect. Here’s how:

Step 1: Open System Preferences.

Step 2: Click Accessibility.

Step 3: Click Display.

Step 4: Uncheck Shake mouse pointer to locate

How to turn the mouse locator on or off in os x

By the way, that’s an interesting naming decision on Apple’s part. A lot of users on macOS will be using trackpads and not mice. I guess I’m just feeling extra nitpicky today.

What do you think about this new feature? Do you think it’s useful, or just a gimmick? Will you be keeping it on or turning it off?

В любой момент можно выйти из системы, а также перевести компьютер Mac в режим сна, вывести его из режима сна, перезагрузить или выключить.


На Mac выберите меню «Apple»

Если Вы не хотите, чтобы окна открытых приложений повторно открывались при следующем входе, снимите флажок «Снова открывать окна при повторном входе в систему».

Если компьютер Mac настроен для использования несколькими пользователями, другой пользователь может выполнить вход после того, как Вы выйдете из системы.

Режим сна

На Mac выберите меню Apple

> «Режим сна». Если Вы используете ноутбук Mac, просто закройте крышку.

Выход из режима сна

На Mac нажмите клавишу пробела либо нажмите кнопку мыши или трекпада. Если Вы используете ноутбук Mac и его крышка закрыта, просто откройте ее.

В целях безопасности можно сделать так, чтобы нужно было обязательно вводить пароль при выводе Mac из режима сна. Возможно, Вы сможете разблокировать Mac при помощи Apple Watch или использовать Touch ID вместо ввода пароля.


На Mac выберите меню Apple

Если Вы не хотите, чтобы окна открытых приложений повторно открывались при перезагрузке Mac, снимите флажок «Снова открывать окна при повторном входе в систему».


На Mac выберите меню Apple

Если Вы не хотите, чтобы окна открытых приложений повторно открывались при перезагрузке Mac, снимите флажок «Снова открывать окна при повторном входе в систему».

Компьютер Mac полностью выключен тогда, когда экран стал черным. На некоторых компьютерах перестает мигать лампочка питания и исчезает шум вентилятора или накопителя.

Важно! Если Вы используете ноутбук Mac, дождитесь его полного выключения, прежде чем закрывать крышку. Если закрыть крышку компьютера Mac во время его отключения, он может не отключиться до конца и при следующем включении будет медленнее загружаться.

Всегда выключайте компьютер Mac, прежде чем открыть корпус компьютера для установки дополнительной памяти или других устройств внутрь компьютера. Вам необходимо также выключить компьютер, прежде чем подключить или отключить определенные периферийные устройства. Если Вы не уверены, то проверьте документацию, прилагающуюся к устройству.

Нет необходимости выключать компьютер Mac при подключении или отключении кабелей, например USB-C, Thunderbolt или Ethernet.

Важно! При необходимости можно выполнить принудительную перезагрузку — например, если Mac перестает реагировать на внешние воздействия. Для этого нажмите и удерживайте кнопку питания, пока Mac не выключится. Несохраненные изменения, внесенные в документы, могут быть потеряны.

Have you encountered such a situation that you can’t find where the pointer is on your computer screen at some point? If yes, you won’t have to keep your eyes open to locate it because you can use the Ctrl key to show the pointer location immediately. Now, continue reading to see how to make it.

Video guide on how to show pointer location with Ctrl key in Windows 10:

2 steps to show pointer location with Ctrl key:

Step 1: Open Mouse Properties.

Press Windows+F to open the search box in Start Menu, type mouse and click Mouse in the list.

How to turn the mouse locator on or off in os x

Step 2: Complete the setting in Pointer Options.

In the Mouse Properties dialog box, open Pointer Options, select Show location of pointer when I press the CTRL key and tap OK.

How to turn the mouse locator on or off in os x

By use of this method, you can instantly find the pointer on the computer screen by pressing the Ctrl key.

Related Articles:

Hot Articles How to turn the mouse locator on or off in os x How to Reset Windows 10 Forgotten Password How to turn the mouse locator on or off in os x How to Bypass Windows 10 Password Login with/without Password How to turn the mouse locator on or off in os x Easy Guide to Reset Windows 10 Admin Password Like an Expert How to turn the mouse locator on or off in os x 4 Tips to Change Windows 10 Password without Knowing Current Password How to turn the mouse locator on or off in os x Can’t Sign into Microsoft Account Windows 10 | Account Locked/Blocked More + Hot Categories Windows 10 Password Windows 8 Password Windows 7 Password More + Latest Articles How to Calculate Power Consumption of a PC 7 Useful Commands Windows 10 Users Should Know 7 Ways to Access System Restore in Windows 10 How to Create or Delete Partitions Using Command Prompt How to Format Disk Partition Using Command Prompt How to Enable and Use God Mode in Windows 10 More + Hot Products Windows Password Genius iTunes Password Genius Product Key Finder More +

This code performs a typical mouse click at the location (100, 100).
We have two functions associated with the drag operation of the mouse, dragTo and dragRel. They perform similar to moveTo and moveRel functions, except they hold the left mouse button while moving, thus initiating a drag.
This functionality can be used at various places, like moving a dialog box, or drawing something automatically using a pencil tool in MS Paint. To draw a square in paint:


Before running the code, open MS paint in the background with the pencil tool selected. Now run the code, quickly switch to MS paint before 10 seconds (since we have given 10 second pause time using sleep() function before running the program).
After 10 seconds, you will see a square being drawn in MS paint, with its top-left edge at 1000, 1000, and edge length 100 pixels.

  • scroll(): scroll function takes no. of pixels as an argument, and scrolls the screen up to a given number of pixels.


  • typewrite(): You can automate typing of the string by using typewrite() function. just pass the string which you want to type as an argument of this function.


  • Passing key names: You can pass key names separately through typewrite() function.


  • Pressing hotkey combinations: Use hotkey() function to press the combination of keys like ctrl-c, ctrl-a, etc.


This code is the automatic equivalent of pressing left ctrl and “a” simultaneously. Thus in windows, this will result in the selection of all text present on the screen.


To send a message in WhatsApp and delete it for everyone automatically. You need to have Whatsapp already opened in chrome, to run this. After running this code, open the WhatsApp tab on chrome.


This article is contributed by tkkhhaarree. If you like GeeksforGeeks and would like to contribute, you can also write an article using or mail your article to [email protected] See your article appearing on the GeeksforGeeks main page and help other Geeks.

Attention geek! Strengthen your foundations with the Python Programming Foundation Course and learn the basics.

To begin with, your interview preparations Enhance your Data Structures concepts with the Python DS Course. And to begin with your Machine Learning Journey, join the Machine Learning – Basic Level Course

There are many third-party apps which can emulate a dock on your screen. On Mac, you don’t have to download such software because it has its own Dock. It is very useful and you can do many useful and cool things with it.

How to turn the mouse locator on or off in os x

If you use a lot of programs or apps, over time you will notice your Dock getting more and more cluttered. Not only will it be harder to hit the right icon, but they will also appear drastically smaller.

This article will show you how to remove icons from the Dock in macOS, both manually and automatically.

How Removing Icons from Dock in macOS Works

First of all, there are some macOS Dock Icons that can’t be removed. These include the Trash Can, furthest to the right, and the Finder icon, furthest to the left. Other than that, you can remove every other Dock icon.

Before you begin removing icons, customize your Dock to your taste. Use the Dock preference pane to change icon size, hide the Dock, magnify icons, etc.

The icons located on the macOS Dock are in fact shortcuts, like the ones you have on a Windows desktop. They are not folders because the actual location of the programs is somewhere else. These icons serve as aliases, and once you remove them, you won’t delete the actual program, but only its shortcut.

How to Make Icons Automatically Disappear from Dock in macOS

Many macOS apps will stay in the Dock long after you used them. You don’t need icons that you don’t use regularly in your Dock, so how do you make them go away? It is fairly simple, just follow these steps:

  1. Go to System Preferences on your Mac.
  2. Select the Dock and find the option Show recent applications in Dock. Make sure it is unchecked.
  3. Now all of the recent apps will be automatically removed from the Dock.

Removing Icons from Dock on OS X Lion and Older Versions

  1. Before you remove an app or document from the Dock, it is best to close it first.
  2. Click on the icon you want to remove and drag it across your desktop. As soon as it is not anywhere near the Dock, you can drop it.

The process is the same on OS X Mountain Lion, except there is a small delay to avoid removing Dock icons by mistake.

Removing Icons from Dock on macOS Mojave

  1. Close the app or document you want to remove from the Dock.
  2. Click on the desired icon and drag it away from the Dock, anywhere on the desktop.
  3. You will be prompted whether you want to remove the icon.
  4. Release the mouse and the icon will vanish from the Dock.

Alternative Method for Removing Icons from Dock in macOS

You can actually remove icons from the Dock in macOS without clicking and dragging them. Here is how you can use the Dock menu to do it:

  1. Move your mouse cursor to the icon on the Dock you want to delete, and right-click on it.
  2. You will see a dropdown menu, and you should choose Options.
  3. Select Remove from Dock and the icon will be gone.

You can use either of these options to remove icons from the Dock and make it nice and tidy once more. Remember to regularly remove unused icons from the Dock.

Decluttering Complete

Once you get rid of all the unwanted icons from your Dock, it will feel much more useful. You will only have the shortcuts to apps and docs you use often. This will save you a lot of time you would otherwise spend looking for the right icon.

Also, you will stop clicking on the wrong icon which can be irritating, to say the least. Now you can even magnify your icons and it won’t matter, because you have more than enough space.

What is your favorite method of removing macOS icons from the Dock? Is your Dock as clean as you’d want it to be? Please, do let us know.