Categories
Device

How to scan mapped network drives with windows defender

By default, Windows Defender in Windows 10 does not scan mapped network drives. In this post, we will show you how to configure Windows Defender to make it scan mapped network drives during a full scan, for better and improved security and protection. Mapped network drives can always be scanned during a quick scan and custom scan.

You can configure Windows Defender to scan for malware and PUPs in the contents of mapped network drives when running a full scan, by using any of the three following ways;

  1. Group Policy Editor.
  2. Registry Editor.
  3. PowerShell.

Let’s take a look at the procedure in detail.

Scan Mapped Network Drives with Windows Defender

1] Via Group Policy Editor

Press Windows key + R. In the Run dialog, type gpedit.msc, hit Enter to launch Group Policy Editor.

In the left pane of Local Group Policy Editor, navigate to the following location:

Computer Configuration > Administrative Templates > Windows Components > Windows Defender Antivirus > Scan

This policy setting allows you to configure scanning mapped network drives.

  • If you enable this setting, mapped network drives will be scanned.
  • If you disable or do not configure this setting, mapped network drives will not be scanned.

In the right pane of Scan in the Local Group Policy Editor window, double-click Run full scan on mapped network drives policy to edit its properties.

To include Mapped Network Drives during a full scan, select the radio button for Enabled. Otherwise, select the radio button for Not Configured or Disabled and click Apply > OK, to exclude Mapped Network Drives during a full scan.

Not Configured is the default setting.

You can exit the Local Group Policy Editor window when done.

2] Via Registry Editor

Press Windows key + R. In the Run dialog box, type regedit, hit Enter, click Yes on UAC prompt to launch Registry Editor.

Navigate to the following Registry key:

If you don’t have the Scan key, create it by right-clicking Windows Defender, then click New > Key.

Now, you can create a new DWORD (32-bit) Value named DisableScanningMappedNetworkDrivesForFullScan.

Now double-click this newly created value to edit its properties.

  • To enable it, give it a value of 0
  • To disable it, give it a value of 1

Restart your PC.

3] Using PowerShell

Open Windows PowerShell (Admin). In the PowerShell environment, type or copy-paste one of the following commands and hit Enter:

To enable scanning of network drives:

To disable scanning of network drives:

A restart is not required here. The setting is applied instantly.

Thus, you can make Windows Defender scan mapped network drives.

Now read: How to enable Network scanning in Windows Defender on Windows 10.

Windows Defender does not check it for viruses or malware by default during its scheduled scans if you have set up mapped network drives on Windows 10. In this article, we will guide you through the whole procedure to scan mapped network drives with Windows Defender on Windows 10.

Scan mapped network drives with Windows Defender on Windows 10

To scan mapped network drives with Windows Defender on Windows 10, follow any of these procedures step by step.

Method #1

Click the Search button on the taskbar. Type Run in the search box and then click the Run option as the following image is showing.

How to scan mapped network drives with windows defender

As soon as you click the Run option, the following dialogue box will appear.

How to scan mapped network drives with windows defender

Type Regedit in the Open textbox and then click the OK button as highlighted in the above image. When you will click the OK button, the Registry Editor will open as the following image is showing.

Navigate through the following path from the left side of the screen.

Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender

Then right click on the Windows Defender option and choose the New -> Key option as the following image is showing.

How to scan mapped network drives with windows defender

Rename the newly created key as Scan as the following image is showing.

How to scan mapped network drives with windows defender

Right click on the Scan option and choose the New -> DWORD (32-bit) Value as the following image is showing.

How to scan mapped network drives with windows defender

Now rename the newly created word as the DisableScanningMappedNetworkDrivesForFullScan as the following image is showing.

Now double click on the DisableScanningMappedNetworkDrivesForFullScan option and the following dialogue box will appear.

How to scan mapped network drives with windows defender

Put 0 in the Value data textbox and then click the OK button as highlighted in the above image. Now close the Registry Editor screen and restart the computer to apply the changes.

Method #2

Click the Search button on the taskbar. Type Run in the search box and then click the Run option as the following image is showing.

How to scan mapped network drives with windows defender

As soon as you click the Run option, the following dialogue box will appear.

How to scan mapped network drives with windows defender

Type gpedit.msc in the Open textbox and then click the OK button as highlighted in the above image. The Local Group Policy Editor screen will open as the following image is showing.

How to scan mapped network drives with windows defender

Navigate to the following path from the left side of the screen.

Computer Configuration -> Administrative Templates -> Windows Components -> Windows Defender Antivirus -> Scan

The following image is showing the same.

How to scan mapped network drives with windows defender

As you click the Scan option from the left side of the screen, the right side will show a lot of options. Locate the Run full scan on mapped network drives option and double click on it as highlighted in the above image. When you will double click the Run full scan on mapped network drives option, the following dialogue box will appear.

How to scan mapped network drives with windows defender

Click the Enabled radio button. After that, click the Apply and then OK button as highlighted in the above image. Close the Local Group Policy Editor and changes will be applied instantly. There is no need to restart the computer.

Conclusion

By following any of these procedures, you will be able to scan mapped network drives with Windows Defender on Windows 10.

Maintaining security on our devices is essential in all cases. We must always avoid the entrance of malware and other threats that may compromise the proper functioning of the systems. For this we can have certain tools that protect us. In this article we will explain how to scan the network drives registered with Windows Defender, the antivirus that is the most used operating system today.

How to scan network drives with Windows Defender

Among all the antivirus that we have at our disposal, we can say that Windows Defender is one of the most popular and present among users. In fact, it comes by default in what is today the most used operating system on desktop computers: Windows 10.

We have the possibility to analyze the registered network units , but for this we will have to configure some parameters. We will explain how to do it. You just have to follow a few simple steps.

Keep in mind that there are differences between users who have Windows 10 Pro and those who are using Windows 10 Home. Both can be configured, but the process is different.

How to set it up in Windows 10 Home

The first thing we have to do is open the Windows registry. To do this, press the key combination Windows + R. Once here we are going to write Regedit , we accept and we will be in the registry.

Then you have to go to the route EquipoHKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWindows Defender. This is where we have to create a new key called “Scan”.

Within Scan , the value that we have created must be given the value DWORD (32 bits) and we assign the name of DisableScanningMappedNetworkDrivesForFullScan. Once created we have to double-click it. Subsequently, the value must be 0. We accept and restart the system.

Use PowerShell

Now we are going to explain how we can configure it in case we want to use PowerShell . We have to go to Start, write PowerShell and run it in administrator mode.

We have to use the command Set-MpPreference -DisableScanningMappedNetworkDrivesForFullScan 0 and we give it to execute. Here it will not show any message indicating that it is already activated, but we can check it. To do this, run the Get-MpPreference command and search for DisableScanningMappedNetworkDrivesForFullScan. It should be marked False.

In case we want to revert what we have applied we would simply have to run DisableScanningMappedNetworkDrivesForFullScan 1.

How to set it up in Windows 10 Pro

In this case we are going to explain how to configure it if we are using Windows 10 Pro. For this we are going to use the group policy editor (gpedit). We have to run the Windows + R key combination again and type gpedit.msc and run it.

Once this is done, navigate to Computer Configuration, Administrative Templates, Windows Components, Windows Defender Antivirus, Detection and double-click Run full exam on mapped network drives.

When we are at this point we will see that it comes as Not configured. We simply have to give it to Enabled and we accept. From that moment on, it will be configured in Windows 10 Pro through this method.

In short, following these steps that we have discussed we can scan the network drives registered in Windows with your Windows Defender antivirus. This way we can improve security and avoid possible problems that put our devices at risk.

It is a reality that security is a very important factor for users. There are many attacks that we can find when browsing the Internet and this is something that can affect regardless of the type of device we are using, as well as the type of operating system.

Fortunately, to maintain security we can make use of a wide variety of tools. Both free and paid antivirus exist and are present in all operating systems. In the case of Windows 10 we can make use, as we have seen, of Windows Defender. A program that can help us to avoid the entrance of malware and other threats that affect the computer.

If you’ve set up a mapped network drive in Windows 10, Windows Defender won’t scan it for viruses or malware by default during its scheduled scans. Here’s how to make sure your network drives are scanned.

Home users: enable scanning of mapped network drives through the registry

If you have Windows 10 Home, you’ll need to edit the Windows Registry, or use PowerShell, which we’ll cover later, to make this change. You can also do it this way if you have Windows 10 Professional or Enterprise, but are more comfortable working in the Registry than Group Policy Editor. (However, if you have Windows 10 Pro or Enterprise, we recommend using the simpler Group Policy Editor, as described in the next section.)

Here’s our standard warning: Registry Editor is a powerful tool, and misusing it can make your system unstable or even inoperable. This is a fairly simple trick, and as long as you follow the instructions, you shouldn’t have any problems. That said, if you’ve never worked with it before, consider reading up on how to use Registry Editor before you begin. And definitely back up the Registry (and your computer!) before making any changes.

How to Backup and Restore the Windows Registry

You should also make a system restore point before continuing. Windows will probably do this automatically when you install an update, but it wouldn’t hurt to do one manually; that way if something goes wrong you can always roll back.

When you’re ready, open Registry Editor by pressing Windows + R on your keyboard, typing “regedit” in the box, and then pressing Enter.

Navigate to the following key in the left sidebar:

If you don’t see a “Scan” key (folder) below the Windows Defender folder, right-click the Windows Defender folder and select New > Key. Name it “Scan”.

How to scan mapped network drives with windows defenderClave.” width=”650″ height=”221″ src=”/pagespeed_static/1.JiBnMqyl6S.gif” onload=”pagespeed.lazyLoadImages.loadIfVisibleAndMaybeBeacon(this);” onerror=”this.onerror=null;pagespeed.lazyLoadImages.loadIfVisibleAndMaybeBeacon(this);”>

Right-click the “Scan” key (folder) in the left pane and select New > DWORD (32-bit) Value.

How to scan mapped network drives with windows defenderValor DWORD (32 bits).’ width=”650″ height=”221″ src=”/pagespeed_static/1.JiBnMqyl6S.gif” onload=”pagespeed.lazyLoadImages.loadIfVisibleAndMaybeBeacon(this);” onerror=”this.onerror=null;pagespeed.lazyLoadImages.loadIfVisibleAndMaybeBeacon(this);”>

Name the value “DisableScanningMappedNetworkDrivesForFullScan”. Double click it and set the value data to “0”.

How to scan mapped network drives with windows defender

You can now close Registry Editor and restart your computer to apply the settings to Windows Defender.

Download our one-click registry hack

Instead of editing the registry yourself, you can download our Enable Mapped Network Drive Scan registry hack. Simply open the downloaded ZIP file, double click the “EnableMappedNetworkDriveScan.reg” file and agree to add the information to your registry. We have also included a “DisableMappedNetworkDriveScan.reg” if you want to disable it again.

These REG files only change the same registry settings that we described above. If you want to see what this or any other REG file will do before you run it, you can right-click the .reg file and select “Edit” to open it in Notepad. You can easily make your own Registry hacks.

How to scan mapped network drives with windows defender

Home users: enable scanning of mapped network drives via PowerShell

If you’re not comfortable editing keys in the Windows Registry, you can enable the option to scan network drives with PowerShell. There’s less risk in using PowerShell, and you won’t have to worry about messing with critical system settings. Simply copy and paste the pre-made cmdlets that we have prepared for this guide.

Start by opening an elevated instance of PowerShell. To do so, click the Start button and then type “Powershell”. Right-click on “Windows PowerShell” and then select “Run as administrator” from the menu.

9 ways to open PowerShell in Windows 10

How to scan mapped network drives with windows defender

Click “Yes” on the message that appears to allow access to your computer.

In the PowerShell window, type the following cmdlet:

How to scan mapped network drives with windows defender

Press Enter to run the command. The PowerShell console will not confirm that the option is set, but you can verify it yourself. Type the following command, look for the value “DisableScanningMappedNetworkDrivesForFullScan” and make sure it is set to “False”.

How to scan mapped network drives with windows defender

If you want to disable scanning of the mapped network drive again, retype the command but put a “1” instead of a “0” before pressing the Enter key.

How to scan mapped network drives with windows defender

You can now close PowerShell safely.

Professional and Enterprise users: Enable scanning of mapped network drives via group policy

If you’re using Windows 10 Professional or Enterprise, the easiest way to enable scanning of mapped network drives is through the Local Group Policy Editor. It’s a pretty powerful tool, so if you’ve never used it before, it’s worth taking some time to learn what it can do. Also, if you’re on a company network, do everyone a favor and check with their admin first. If your work computer is part of a domain, it’s also likely to be part of a domain group policy that will override local group policy anyway.

You should also make a system restore point before continuing. Windows will probably do this automatically when you install the Anniversary Update. Still, it wouldn’t hurt to do one manually, that way if something goes wrong you can always roll back.

Using Group Policy Editor to modify your PC

First, launch the group policy editor by pressing Windows + R, typing “gpedit.msc” in the box, and pressing the Enter key.

How to scan mapped network drives with windows defender

Go to Computer Configuration > Administrative Templates > Windows Components > Windows Defender Antivirus > Scan.

To update: According to one commenter, you may need to navigate to Computer Configuration > Administrative Templates > Windows Components > Microsoft Defender Antivirus > Scan, depending on the version of Windows 10 running on your machine.

Locate the “Run full scan on mapped network drives” setting in the right pane and double-click it.

How to scan mapped network drives with windows defender

Set “Run full scan on mapped network drives” to “Enabled” and click “OK” to save changes.

How to scan mapped network drives with windows defender

All changes have been saved and will take effect immediately. You can now close the group policy editor, and there is no need to reboot your PC.

To disable scans of mapped network drives, come back here, double-click the “Run full scan on mapped network drives” setting and change it to “Not configured” or “Disabled”.

By default, Windows Defender in Windows 10 does not scan mapped network drives. SMB shares that you mapped as a drive letter can also include malware. For better security and protection, you can enable this feature. The Defender app does not include an option to control scanning of mapped network drives in the user interface, but there are at least two methods to enable this feature. Let’s see how.

If you are using Windows Defender as your primary protection software, you might be interested in enabling scanning of network drives during the full scan. Here is how it can be done.

Enable Network Drive Scan with Windows Defender in Windows 10

Method 1. Using a Registry tweak

  1. Open Registry Editor.
  2. Go to the following Registry key:

Tip: How to jump to the desired Registry key with one click. If you don’t have such a key, then create it.

  • Here, create a new 32-bit DWORD value named DisableScanningMappedNetworkDrivesForFullScan. Note: Even if you are running 64-bit Windows you must still create a 32-bit DWORD value.
    Leave its value data as 0 to enable scanning of network drives.Set its value data to 1 to disable scanning of network drives.
  • Restart Windows 10.
  • You can download ready-to-use Registry files including the undo file:

    To avoid Registry editing, you can use PowerShell to configure network drive scanning.

    Method 2. Using PowerShell

    With a single PowerShell command, you can enable or disable scanning of network drives quickly.

    1. Open an elevated PowerShell prompt.
    2. Type or copy-paste one of the following commands:
      To enable scanning of network drives:

    To disable scanning of network drives:

    The changes will be applied immediately. Restarting Windows is not required.

    Winaero greatly relies on your support. You can help the site keep bringing you interesting and useful content and software by using these options:

    If you like this article, please share it using the buttons below. It won’t take a lot from you, but it will help us grow. Thanks for your support!

    Author: Sergey Tkachenko

    Sergey Tkachenko is a software developer who started Winaero back in 2011. On this blog, Sergey is writing about everything connected to Microsoft, Windows and popular software. Follow him on Telegram, Twitter, and YouTube. View all posts by Sergey Tkachenko

    Soluții pentru problemele tale IT

    Configure Windows Defender to scan Mapped Network Drives on Windows 10

    • Data 18/02/2020
    • Autor stefan botezatu
    • Categorie OS – Windows, Soluții, Aplicații
    • -12
    • 491

    Configurare noua (How To)

    Situatie

    By default, Windows Defender in Windows 10 does not scan mapped network drives. In this post, we will show you how to configure Windows Defender to make it scan mapped network drives during a full scan, for better and improved security and protection. Mapped network drives can always be scanned during a quick scan and custom scan.

    You can configure Windows Defender to scan for malware and PUPs in the contents of mapped network drives when running a full scan, by using any of the three following ways;

    1. Group Policy Editor.
    2. Registry Editor.
    3. PowerShell.

    Solutie

    Pasi de urmat

    Enable Scan Mapped Network Drives in Windows Defender

    1] Via Group Policy Editor

    How to scan mapped network drives with windows defender

    Press Windows key + R. In the Run dialog, type gpedit.msc, hit Enter to launch Group Policy Editor.

    In the left pane of Local Group Policy Editor, navigate to the following location:

    Computer Configuration > Administrative Templates > Windows Components > Windows Defender Antivirus > Scan

    This policy setting allows you to configure scanning mapped network drives.

    • If you enable this setting, mapped network drives will be scanned.
    • If you disable or do not configure this setting, mapped network drives will not be scanned.

    In the right pane of Scan in the Local Group Policy Editor window, double-click Run full scan on mapped network drives policy to edit its properties.

    To include Mapped Network Drives during a full scan, select the radio button for Enabled. Otherwise, select the radio button for Not Configured or Disabled and click Apply > OK, to exclude Mapped Network Drives during a full scan.

    Not Configured is the default setting.

    2] Via Registry Editor

    Press Windows key + R. In the Run dialog box, type regedit, hit Enter, click Yes on UAC prompt to launch Registry Editor.

    Navigate to the following Registry key:

    HKEY_LOCAL_MACHINE > SOFTWARE > Policies > Microsoft > Windows Defender > Scan

    If you don’t have the Scan key, create it by right-clicking Windows Defender, then click New > Key.

    Now, you can create a new DWORD (32-bit) Value named DisableScanningMappedNetworkDrivesForFullScan.

    How to scan mapped network drives with windows defender

    Now double-click this newly created value to edit its properties.

    • To enable it, give it a value of 0
    • To disable it, give it a value of 1

    How to scan mapped network drives with windows defender

    Restart your PC.

    3] Using PowerShell

    Open Windows PowerShell (Admin). In the PowerShell environment, type or copy-paste one of the following commands and hit Enter:

    To enable scanning of network drives:

    To disable scanning of network drives:

    A restart is not required here. The setting is applied instantly.

    Map a network drive to get to it from File Explorer in Windows without having to look for it or type its network address each time.

    Open File Explorer from the taskbar or the Start menu, or press the Windows logo key + E.

    Select This PC from the left pane. Then, on the File Explorer ribbon, select More > Map network drive.

    How to scan mapped network drives with windows defender

    In the Drive list, select a drive letter. (Any available letter will do.)

    In the Folder box, type the path of the folder or computer, or select Browse to find the folder or computer. To connect every time you sign in to your PC, select Reconnect at sign-in.

    Note: If you can’t connect to a network drive or folder, the computer you’re trying to connect to might be turned off, or you might not have the correct permissions. Try contacting your network administrator.

    Map a network drive to get to it from File Explorer in Windows without having to look for it or type its network address each time.

    Open File Explorer from the taskbar or the Start menu, or press the Windows logo key + E.

    Select This PC from the left pane. Then, on the Computer tab, select Map network drive.

    How to scan mapped network drives with windows defender

    In the Drive list, select a drive letter. (Any available letter will do.)

    In the Folder box, type the path of the folder or computer, or select Browse to find the folder or computer. To connect every time you sign in to your PC, select Reconnect at sign-in.

    Note: If you can’t connect to a network drive or folder, the computer you’re trying to connect to might be turned off, or you might not have the correct permissions. Try contacting your network administrator.

    Exclude drives, files, and folders from Windows Defender antivirus scans!

    This is not about the Windows Defender Antivirus operating improperly, but being too accurate and preventing a drive from being safely removed or ejected. Especially if it is an external hard drive, or a USB stick with many videos and pictures. The following steps will help you exclude drives, files, folders, and other items from scanning on Windows 11, 10 and MS Server OS.

    1. Please open the Windows 10 / 11 settings simply Windows-Logo + I and enter the text “defender” .

    2. Scroll to the item “Manage settings”

    3. Scroll to the point “Add or remove exclusions”

    4. And exclude folders, or complete hard disk paths!

    Here in the example the external drive “Y:\”

    It works well and is practically the simple to add or remove drives!

    (Image-1) Exclude external drive from Defender Virus Scan!
    How to scan mapped network drives with windows defender

    Under Windows 10/11, the activated Windows Defender Antivirus is usually your default antimalware software to protect your device and data from viruses, Roolkits, Ransomware and other security threats. Although the built-in Windows 10 antivirus works well for the most part, it may flag a file or folder that you trust as malicious. If you want to prevent this type of behavior from occurring, Windows Defender Antivirus provides an option to exclude files and folders, as well as file types and processes that should be scanned and blocked.

    As you can see, you do not need a Windows 10 guide to take these simple steps to exclude specific items and locations from Windows Defender antivirus scans.

    What can I do if I still have problems with the task “Exclude External Drive from Defender Virus Scan” is a frequently asked question. Easy Restart the Windows 10 please perform a correct Windows restart.

    Updated on: 8 July 2021 19:01 Windows

    Last year I wrote this article “What to Do When Creating Folders or Accessing Files on Remote Computer is Very Slow.” In that article I mentioned several troubleshooting techniques and tips on fixing the issue of slow network access to shares. In this article, I will share another method to address the issue. After I had fixed the issue last year. I started to have the same problem again. This time I used the following registry modification to fix the issue. The problem was related to the SMB2 cache redirection as explained by Microsoft in the article SMB2 Client Redirector Caches Explained.

    PROBLEM

    Access to network files and folders is very slow. The network drives are mapped in Windows 10, Windows 8, or Windows 7.

    SOLUTION

    Here’s the step-by-step procedure on how I was able to resolve the issue. I was using Windows 10 Pro on the computer that was having the issue and that’s where the following change should be made to the registry. The network shares were also on a Windows 10 Pro desktop, but the registry change needs to be made on the computer which is experiencing slow access, not the one that’s hosting the network shares.

    WARNING! This solution requires modifying the registry. Modifying the registry is like doing a brain surgery on the computer. Only trained individuals who know what they are doing should modify the registry. The information in this article is for reference only. Modify the registry at your own risk.
    1. In Windows Search box type regedit and press Enter to access the Registry Editor.
    2. Go to HKEY_LOCAL_MACHINE and locate System\CurrentControlSet\Services\Lanmanworkstation\Parameters.
    3. Create a new DWORD value for DirectoryCacheLifetime.
    4. Double-click the value and set it to zero (0).
      How to scan mapped network drives with windows defender
    5. It’s not necessary to disable additional caches, but if the above setting doesn’t fix the problem, then you may want to disable two additional SMB cache values. One for FileInfoCacheLifetime and another for FileNotFoundCacheLifetime. You need to add both of them as type REG_DWORD and set the value zero (0) to disable them, if they don’t already exist in the registry.

    NOTE: Whether to use DWORD or QWORD has nothing to do with the type of Windows 10 operating system (32-bit vs. 64-bit) you are using. For more information visit this article: Using DWORD vs. QWORD When Adding Values to Windows Registry.

    WARNING! It’s possible that you may experience a significant performance hit by disabling these caches. If that’s the case, simply re-enable these caches by deleting these registry keys. Deleting them will set it back to their default values, or you can manually change the values to their default settings. The default values are supposed to work for most scenarios, but that’s not always the case.

    Here’s the description provided by Microsoft for each of these cache values.

    FileInfoCacheLifetime: File attribute information which is contained in the File_Network_Open_Information structure which is useful in conserving network IO for retrieving common file metadata information. To disable or turn off the caching behavior the value of this registry key should be changed to 0. Turning off the file information cache is not recommended as it could nearly double the number of network transactions required for executing a given scenario. Default is 10 seconds.

    FileNotFoundCacheLifetime: This is a cache of files which the client failed to open because the file was not present on the server. This prevents the client from repeatedly attempting to open files which are known not to exist on the server. This cache is likely to affect distributed applications running on multiple computers accessing a set of files on a server – where the applications use an out of band mechanism to signal each other about addition/deletion of files on the server. Default is 5 seconds.

    DirectoryCacheLifetime: This is a cache of recent directory enumerations performed by the client. Subsequent enumeration requests made by client applications as well as metadata queries for files in the directory can be satisfied from the cache. The client also uses the directory cache to determine the presence or absence of a file in the directory and uses that information to prevent clients from repeatedly attempting to open files which are known not to exist on the server. This cache is likely to affect distributed applications running on multiple computers accessing a set of files on a server – where the applications use an out of band mechanism to signal each other about modification/addition/deletion of files on the server. Default is 10 seconds.

    Last Updated: March 18, 2020

    Thanks for reading my article. If you are interested in IT training & consulting services, please reach out to me. Visit ZubairAlexander.com for information on my professional background.

    Quick Navigation :

    Network drives may not be familiar to many people. However, when a company has multiple users sharing files through a network, network drives can provide greater benefits. Then, I will introduce information about the network drive for you. If you are interested in this topic, you can continue to read this post from MiniTool.

    Definition of Network Drive

    What is network drive? A network drive is an entire hard drive, which is directly hard-connected to the network via Ethernet. Any network user with appropriate credentials or authorization can use it for data storage. Use an external hard drive here, plug it into a modem or switch via USB or Ethernet cable.

    However, it is usually common to think of network drives as NAS (Network Attached Storage) drives, which are a series of drives directly connected to a network hub.

    Since there are no dedicated peripherals, the NAS drive is placed in a small stack and a simplified OS is used to manage the driven series. You can log in to the drive through the network to access files as needed.

    Advantages of Network Drive

    Now, let’s see the advantages of the network drive.

    • NAS and SAN solutions can make adding storage easier.
    • Permission can specify who you want to be able to view or edit files.
    • Network drives are a central storage location, making them easier to back up and mirror.
    • Network drives and their files can be shared with many people.

    How to scan mapped network drives with windows defender

    This article will offer you five efficient solutions to share files between computers. Besides, there are some things you need to do to access shared files.

    Disadvantages of Network Drive

    There are also some disadvantages of the network drive.

    • Anyone with access to the drive can copy or move all of its data to another location. You may worry about your privacy.
    • Network drive requires network. If your network fails, you will not be able to access all the files on the network drive.
    • As a central location with multiple users, it increases the possibility of accidental deletion, modification, hacking, or infection.

    Applications of Network Drive

    There is some competition between network drives and cloud file storage and sharing software because they are more useful in home and business environments. Here are the details.

    For Home User

    You can regard the network drive as the cloud storage contained in a single network. At home, if you have files on your laptop and you also want to access these files on your partner’s desktop or tablet, you can save these files to a network drive and all devices on the network (with correct access credentials) can access these files. Network drives perform well on network drives as a large media library.

    For Business User

    For enterprises, especially small and medium-sized enterprises, the same principles can be applied on a larger and wider scale. For small and medium-sized companies that tend to use only one network in one location, network storage can play a major role.

    The disadvantage of network drives is that the drive may fail. If the drive failure has little to do with cloud storage, it may waste local files. If the main drive fails, you can prepare a backup. Maybe, you need this post – Requirements and Recommendation for Enterprise Backup Solution.

    How to Map Network Drive

    Then, you may wonder how to map a network drive. Follow the guide below to do that:

    Step 1: Type File Explorer in the Search box to open it.

    Step 2: Select This PC from the left pane.

    Step 3: Then, under the Computer tab, select Map network drive.

    How to scan mapped network drives with windows defender

    Step 4: In the Drive list, select a drive letter.

    Step 5: In the Folder box, type the path of the folder or computer, or select Browse to find the folder or computer. To connect every time you log on to your PC, select the Reconnect at sign-in check box.

    Step 6: At last, you need to select Finish.

    Final Words

    Now, you have known the basic information about the network drive. You can know what it is, what the advantages and disadvantages are, as well as the applications. Besides, you can know how to map network drive on Windows 10.

    • Facebook
    • Twitter
    • Linkedin
    • Reddit

    Join for Exclusives

    Connect with us for giveaways, exclusive promotions, and the latest news!

    By Tina | Follow | Last Updated June 01, 2021

    Summary :

    How to scan mapped network drives with windows defender

    How to find the path of a network drive Windows 10? This post from MiniTool shows you how to view the network path. In addition, you can visit MiniTool to find more Windows solutions and tips.

    Mapping a network drive is very convenient for users since all devices on the same LAN are allowed to access it. If you need to share files between colleagues when doing your work, or you simply want to stream your media from one room to the next, setting up a network drive would be a reliable way.

    But some people also ask where they can see the network drive path on my Windows computer or device? How to find the path of a network drive Windows 10? Keep on your reading.

    If you have the same question, you come to the right place here. This post will show you how to find the path of a network drive Windows 10.

    How to Find the Path of a Network Drive Windows 10

    How do I find my network path? This section shows you the solution. In fact, you can find it via Command Prompt.

    Now, here is the tutorial.

    1. Open Command Prompt.
    2. In the Command Prompt window, type the command NET USE and hit Enter to continue. The command will show all the mapped network shared drive path, like the below picture.

    How to scan mapped network drives with windows defender

    • Status: Show whether the network drive is mapped currently or disconnected.
    • Local: Mapped Drive letter.
    • Remote: The full path of the shared drive.

    From the command line, you can find the path of a network drive Windows 10. Then you can copy the shared network drive path and use it to map shared drive in other computers.

    Besides finding the path of a network drive in Windows 10 via Command Prompt, you can also find the path of a mapped drive in Windows Explorer.

    Just open Windows Explorer, and go to This PC. Then you will find the mapped network drive is listed in the Network locations. View it, you can find the path of a mapped drive.

    How to scan mapped network drives with windows defender

    If you are looking for solutions to fix the error can’t map network drive Windows 10, this post is what you need.

    How to Find the Path of Shared Folders Windows 10?

    Besides the mapped network drive, shared folder is also important for Windows users since it enables users who are in the same LAN to access the contents.

    However, do you know how to access shared folder in Windows 10 or how to find the path of shared folder?

    To find the path of shared folder, there are several ways. Here, we briefly introduce one of them.

    1. Open Command Prompt.
    2. Then type the command net share and hit Enter to continue.
    3. Then the shared folder will be listed.
    4. From the command line, you can also find the path of the shared folders.

    How to scan mapped network drives with windows defender

    Then you can share the path of shared folder with other people and they can access it. Apart from this way, you can also view the path of shared folder via Windows Explorer and Computer Management.

    How to scan mapped network drives with windows defender

    This article is going to provide you with five methods to solve the problem of Windows 10 file sharing not working when you share files.

    Final Words

    How do I find the path of a mapped drive? How to find the path of a network drive Windows 10? After reading this post, you may also have known the solutions. If you have any different idea of how to find the path of a network drive Windows 10, you can share it in the comment zone.

    • Facebook
    • Twitter
    • Linkedin
    • Reddit

    ABOUT THE AUTHOR

    How to scan mapped network drives with windows defender

    Position: Columnist

    Tina is a technology enthusiast and joined MiniTool in 2018. As an editor of MiniTool, she is keeping on sharing computer tips and providing reliable solutions, especially specializing in Windows and files backup and restore. Besides, she is expanding her knowledge and skills in data recovery, disk space optimizations, etc.

    On her spare time, Tina likes to watch movies, go shopping or chat with friends and enjoy her life.

    A recent update for Windows Defender to version 4.12.17007.17123 changed the path of the built-in antivirus software on Windows 10 devices.

    Microsoft changed the paths the of the Windows Defender Antivirus service component MsMpEng.exe and the Network Realtime Inspection service component NisSrv.exe, as well as the path of Windows Defender Antivirus drivers.

    The change affects machines running Windows 10 version 1703 and newer on Windows 10 Home, Pro and Enterprise machines.

    Microsoft moved the files MsMpEng.exe and NisSrv.exe from %ProgramFiles%\Windows Defender to %ProgramData%\Microsoft\Windows Defender\Platform\, and Windows Defender Antivirus drivers from %Windir%\System32\drivers to %Windir%\System32\drivers\wd.

    How to scan mapped network drives with windows defender

    The support page KB4052623 confirms the update, but does not provide explanation why the change was made. Windows 10 Home, Pro and Enterprise, and Windows Server 2016 are affected by the change according to Microsoft.

    This article describes an antimalware platform update package for Windows Defender for the following operating systems: Windows 10 (Enterprise, Pro, and Home), Windows Server 2016.

    Because of a change in the file path location in the latest update (Antimalware Client Version: 4.12.17007.17123)..

    The change did cause issues with Windows 10’s AppLocker functionality, and that is the main reason why Microsoft published the support article.

    According to Microsoft’s information, the path change could cause AppLocker to block many downloads on the Windows machine.

    The company published a workaround that requires that administrators set the following path %OSDrive%\ProgramData\Microsoft\Windows Defender\Platform\* in the Group Policy.

    The update may cause another rare issue according to Microsoft on systems on which Windows Defender Advanced Threat Protection runs together with Windows Defender Antivirus. Systems may be put into “passive mode” during installation of the update which disables real-time protection.

    Administrators need to delete the PassiveMode value in the Windows Registry under HKLM\SOFTWARE\Microsoft\Windows Defender to resolve the issue. Microsoft notes that it may be necessary to take ownership of the Windows Defender subkey, and to enable full access to the user account to do so.

    The following table lists the affected components, and the old and new storage location.

    Windows Defender Antivirus service (MsMpEng.exe)

    Network Realtime Inspection service (NisSrv.exe)

    Closing Words

    It is unclear at this point in time why Microsoft made the Windows Defender path changes in first place. (via Deskmodder)

    Today one of my clients told me that the mapped network drives are not available on his Windows 10 PC. After reviewing the issue, I tried to remap the shared folder to a drive letter, but I found that the drive letter I was using before for the mapping, was not available. If you experience a similar problem continue reading below to fix it.

    How to scan mapped network drives with windows defender

    This tutorial contains instructions to resolve the following issue in Windows 10: No Network Drives in Windows 10 – Mapped Network Drives not Showing.

    How to Fix: Network Mapped Drives Not Available in Windows 10 or Windows 7 OS.

    Suggestion: Before continuing below proceed and install all the available Windows 10 Updates and see if the problem persists.

    1. Open Registry Editor. To do that:

    1. Simultaneously press the Win + R keys to open the run command box.
    2. Type regedit and press Enter to open Registry Editor.

    How to scan mapped network drives with windows defender

    2. Navigate to this key at left pane:

    • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System

    3. At the right pane, right-click at an empty space and choose New > DWORD (32-bit value).

    How to scan mapped network drives with windows defender

    4. Name the new value: EnableLinkedConnections

    How to scan mapped network drives with windows defender

    5. Double-click the EnableLinkedConnections value, change the Value Data to 1 and click OK.

    How to scan mapped network drives with windows defender

    6. Close the registry editor and restart the computer.
    7. After restart, all the mapped network drives will be available again.

    That’s it! Let me know if this guide has helped you by leaving your comment about your experience. Please like and share this guide to help others.

    Your question is two-pronged. A network share has no IP address, but the host that shares it has.

    First, you want to resolve a drive letter to an UNC path, second you want to resolve the IP address of the host of that UNC path.

    There are multiple ways to do this. See How do I find where a network drive is mapped to in Windows 7? and List mapped network drives from the command line to text file.

    One way that’s shown there: if you type net use in the command prompt, you’ll get output like this:

    Now you see the drive (under “Local”) and the UNC path (under “Remote”). The hostname of the UNC path is the part between the first two backslashes and the backslash after that ( some-host in \\some-host\ ).

    Then you can simply type nslookup some-host to find the IP address of that host:

    The IP you’re looking for in this case is 192.168.1.42 .

    Open CMD

    example Press Windows Key and R

    type ping then the drive name example below

    C:\Users\User>ping htestrna01

    Pinging htestrna01.ad.com [11.30.137.214] with 32 bytes of data:

    Ping statistics for 11.30.137.214: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 1ms, Average = 0ms

    Then you will get the ip.

    Open Network Connections by clicking the Start button Picture of the Start button, and then clicking Control Panel. In the search box, type adapter, and then, under Network and Sharing Center, click View network connections.

    Select an active network connection, and then, in the toolbar, click View status of this connection. (You might need to click the chevron Picture of the chevron icon to find this command.) Click Details.

    Hey, Scripting Guy! How can I determine which drives on a computer are mapped to network shares?

    Hey, CP. OK, you better sit down, because what we’re about to say will shock you: if you want to determine which drives on a computer are mapped to network shares, don’t use the Win32_MappedLogicalDisk class.

    Oh, look: you spilled coffee on everything. Didn’t we tell you to sit down? Here, here’s some paper towels.

    While you clean up – don’t forget that little puddle by the phone – we’ll explain why. The truth is, you can use the WMI class Win32_MappedLogicalDisk to determine which drives are mapped to network shares. The problem, however, is that while this class will return the drive letters for these drives, it won’t tell you which shares the drives are mapped to. Weird, but true.

    And so it’s Win32_LogicalDisk to the rescue. With this class not only can we determine which drives are mapped to network shares, but we can also determine which network shares they map to. And to do that requires nothing more than a script like this:

    Stop us if you’ve heard this one before, but the script starts out by connecting to the WMI service on the local computer. (As usual, you can modify this script to run against a remote computer simply by assigning the name of that machine to the variable strComputer.) We then use this line of code to return a collection of all the mapped network drives:

    The key here – as you might have guessed – lies in our Where clause. We’re asking for all instances of the class where the DriveType is equal to 4; needless to say, a DriveType equal to 4 represents a mapped network drive. (For other DriveType values, see the WMI SDK on MSDN.) The query returns a collection of all the mapped drives; we then set up a For Each loop to walk through that collection. For each mapped drive we echo the value of two properties: DeviceID , which returns the drive letter for the drive; and ProviderName , which returns the network share the drive is mapped to.

    In other words, we get back information similar to this:

    That’s OK, we understand: as useful as this script is, it still comes as a bit of a shock that we didn’t use the Win32_MappedLogicalDisk class. Listen, this has been kind if rough on you: why don’t you take the rest of the day off? Just tell your boss the Scripting Guys said it was OK.

    Legal disclaimer . On the advice of our attorneys (and, trust us, the Scripting Guys need their own attorneys), we did not say it was OK. (But if you want to try it anyway, well, good luck.)

    Soluții pentru problemele tale IT

    Configure Windows Defender to scan Mapped Network Drives on Windows 10

    • Data 18/02/2020
    • Autor stefan botezatu
    • Categorie OS – Windows, Soluții, Aplicații
    • -12
    • 503

    Configurare noua (How To)

    Situatie

    By default, Windows Defender in Windows 10 does not scan mapped network drives. In this post, we will show you how to configure Windows Defender to make it scan mapped network drives during a full scan, for better and improved security and protection. Mapped network drives can always be scanned during a quick scan and custom scan.

    You can configure Windows Defender to scan for malware and PUPs in the contents of mapped network drives when running a full scan, by using any of the three following ways;

    1. Group Policy Editor.
    2. Registry Editor.
    3. PowerShell.

    Solutie

    Pasi de urmat

    Enable Scan Mapped Network Drives in Windows Defender

    1] Via Group Policy Editor

    How to scan mapped network drives with windows defender

    Press Windows key + R. In the Run dialog, type gpedit.msc, hit Enter to launch Group Policy Editor.

    In the left pane of Local Group Policy Editor, navigate to the following location:

    Computer Configuration > Administrative Templates > Windows Components > Windows Defender Antivirus > Scan

    This policy setting allows you to configure scanning mapped network drives.

    • If you enable this setting, mapped network drives will be scanned.
    • If you disable or do not configure this setting, mapped network drives will not be scanned.

    In the right pane of Scan in the Local Group Policy Editor window, double-click Run full scan on mapped network drives policy to edit its properties.

    To include Mapped Network Drives during a full scan, select the radio button for Enabled. Otherwise, select the radio button for Not Configured or Disabled and click Apply > OK, to exclude Mapped Network Drives during a full scan.

    Not Configured is the default setting.

    2] Via Registry Editor

    Press Windows key + R. In the Run dialog box, type regedit, hit Enter, click Yes on UAC prompt to launch Registry Editor.

    Navigate to the following Registry key:

    HKEY_LOCAL_MACHINE > SOFTWARE > Policies > Microsoft > Windows Defender > Scan

    If you don’t have the Scan key, create it by right-clicking Windows Defender, then click New > Key.

    Now, you can create a new DWORD (32-bit) Value named DisableScanningMappedNetworkDrivesForFullScan.

    How to scan mapped network drives with windows defender

    Now double-click this newly created value to edit its properties.

    • To enable it, give it a value of 0
    • To disable it, give it a value of 1

    How to scan mapped network drives with windows defender

    Restart your PC.

    3] Using PowerShell

    Open Windows PowerShell (Admin). In the PowerShell environment, type or copy-paste one of the following commands and hit Enter:

    To enable scanning of network drives:

    To disable scanning of network drives:

    A restart is not required here. The setting is applied instantly.

    By Melanie Pinola published 29 April 19

    You can easily create a shortcut to another drive or folder shared on your network by mapping that location. When you map a network drive, it will show up as a new drive under This PC in File Explorer, so you can quickly access the shared files you need, just like you would your local hard drive. Here’s how to make that network drive shortcut in Windows 10.

    How to Map a Network Drive in Windows 10

    1. Open File Explorer and select This PC.

    2. Click the Map network drive drop-down in the ribbon menu at the top, then select “Map network drive.” (This is under the Computer tab, which should open automatically when you go to This PC, as above.)

    3. Select the drive letter you want to use for the network folder, then hit Browse.

    4. If you receive an error message, then you’ll need to turn on network discovery. To do so, open the Control Panel, select Network and Sharing Center and choose Change advanced sharing settings from the top-left corner. From there, select Turn on network discovery. Save changes.

    choose network folder

    5. Navigate to the folder you want to map and hit OK after selecting it.

    6. Confirm your selection and click Finish. You can choose to reconnect to the folder every time you sign in so it’s always available. You can even use a different user account to connect to the folder if needed.

    7. When you’re done, you should see the new drive letter under This PC and will be able to access its contents like you would any other folder. If you want to disconnect the network drive, right-click on it and select Disconnect.

    This guide is part of a video series companion guide on setting up mapped drives on Intune devices – you can watch the video here S02E18 – How to Map Network Drives on Microsoft Intune Devices – (I.T) – YouTube! This is rather simple but I will be adding some useful bits of code for people who do not have an always on VPN solution for all those Work From Home scenarios.

    Creating the script

    Before we get started let me explain how this process works. We are going to create a script that we deploy via intune, which in turn will create a scheduled task to map the network drives at login. We will then be adding a few lines of code to also have it map on any network changes.

    1. Go to https://intunedrivemapping.azurewebsites.net/DriveMapping
    2. Follow the onscreen options to add/remove mapped drives as needed
    3. Select Download Powershell Script
    4. Edit the powershell script, near the bottom you will see the following line
      $trigger = New-ScheduledTaskTrigger -AtLogOn
    5. Remove everything below that point and add the following

    Upload to Intune

    1. Navigate to https://endpoint.microsoft.com/
    2. Select Devices
    3. Select Scripts
    4. Select Add – Windows 10
    5. Give it a Name and select Next
    6. Select your script file and Next
    7. Assign to the desired user group and Next
    8. Select Add

    Verify the Scheduled Task Exists

    Once you have deployed the script to the selected group, you can sync Intune policies through Company Portal. Remember it can take up to 8 hours for this to appear. You should see a scheduled Task named IntuneDriveMapping and the triggers should look like the below.

    • Wednesday May 25, 2022, 3:06 am
    • Proudly celebrating 15+ years online.
    • Donate now to become a lifetime supporting member of the site and get a non-expiring license key for all of our programs.
    • Forum Home
    • Search
    • Login
    • Register
    • Recent Topics
    • Go To..
      • Recently updated topics
      • Recent posts (compact)
      • Recent posts (full text)
    • DonationCoder.com Forum »
    • Main Area and Open Discussion »
    • General Software Discussion »
    • A way to add indexing for mapped network drives to Windows 10 Home
    • New Topic
    • Print

    Author Topic: A way to add indexing for mapped network drives to Windows 10 Home (Read 16079 times)

    • New Topic
    • Print
    • DonationCoder.com Forum »
    • Main Area and Open Discussion »
    • General Software Discussion »
    • A way to add indexing for mapped network drives to Windows 10 Home
    • SMF © 2016, Simple Machines and DonationCoder.com
    • RSS

    Page created in 0.034 seconds with 49 queries.

    Quickly check your hard drive with this Windows version of CHKDSK

    How to scan mapped network drives with windows defender

    • Tweet
    • Share
    • Email

    What to Know

    • Right-click Start, select File Explorer in Windows 11/10/8.
    • Select This PC. Right-click or tap and hold the drive. Select Properties >Tools >Check >Scan drive.
    • Wait for the scan to complete. Follow any instructions given. You may be instructed to restart.

    This article explains how to scan a hard drive using the Error Checking tool in Windows 11, Windows 10, and Windows 8. Variations for Windows 7, Vista, and XP are included.

    How to Scan a Hard Drive With the Error Checking Tool

    Scanning your hard drive with the Error Checking tool can identify, and possibly correct, a range of hard drive errors. The Windows Error Checking tool is the graphical version of the command-line chkdsk command, which is still available and offers more advanced options than Error Checking.

    Error Checking is available in Windows 11, Windows 10, Windows 8, Windows 7, Windows Vista, and Windows XP, but there are differences as shown.

    Right-click the Start button and select File Explorer (Windows 11/10/8), Open Windows Explorer (Windows 7), or Explore (Vista/XP).

    How to scan mapped network drives with windows defender

    File Explorer is available via a quick search, too. Windows Explorer, in earlier versions of Windows, is also available via Computer or My Computer in the Start menu.

    Select This PC (Windows 11/10/8), Computer (Windows 7/Vista), or My Computer (XP) in the left margin.

    You might have to enable Navigation pane from the View menu if you don’t see this option. In XP, this is in View > Explorer Bar > Folders.

    Right-click or tap-and-hold the drive that you want to check for errors on (usually C), and select Properties.

    How to scan mapped network drives with windows defender

    If you don’t see any drives under the heading you located in Step 2, select the little arrow to the left to show the list of drives.

    Select the Tools tab at the top of the window.

    What you do now depends on which version of Windows you’re using:

    • Windows 11, 10 & 8: Choose Check followed by Scan drive, and then skip down to Step 8.
    • Windows 7, Vista, & XP: Choose Check now and then continue with Step 6.

    How to scan mapped network drives with windows defender

    See What Version of Windows Do I Have? if you’re not sure what you’re running.

    Two options are available before starting an Error Checking scan in Windows 7, Vista, and XP:

    • Automatically fix file system errors will, if possible, automatically correct file system related errors that the scan detects. We highly recommend that you check this option every time.
    • Scan for and attempt recovery of bad sectors will perform a search for areas of the hard drive that may be damaged or unusable. If found, this tool will mark those areas as “bad” and prevent your computer from using them in the future. This is a very useful feature, but could extend the scan time as much as a few hours.

    The first option is equivalent to executing chkdsk /f and the second to executing chkdsk /scan /r. Checking both is the same as executing chkdsk /r.

    Press Start.

    Wait while Error Checking scans the selected hard drive for errors and, depending on options you selected and/or what errors are found, fixes any errors found.

    If you get a Windows can’t check the disk while it’s in use message, select Schedule disk check, close any other open windows, and then restart your computer. You’ll notice that Windows takes much longer to start up and you’ll see text on the screen as the Error Checking (chkdsk) process completes.

    Follow whatever advice is given after the scan. If errors were found, you may be asked to restart your computer. If no errors were found, you can close any open windows and continue using your computer normally.

    If you’re interested, a detailed log of the Error Checking scan, and what was corrected if anything was, can be found in the list of Application events in Event Viewer. If you have trouble locating it, focus your attention on Event ID 26226.

    Windows 11, Windows 10, and Windows 8 check for errors automatically and will notify you if you need to take action, but you can run a manual check anytime you like.

    How to scan mapped network drives with windows defender

    Accessing files from your local hard drive is about the easiest thing you can do on your computer. Taking this to another level and accessing files on hard drives on another system is a bit more complicated. Mapping a network drive is one way of achieving this.

    Mapping your location will imply that you can create a shortcut to another drive or folder shared on your network. Doing this means that the mapped network drive will display under “This PC” in file explorer.

    You can map a network drive using the file explorer or from the control panel.

    Also read: How to Create a Windows 10 Backup to a Network Drive

    Turn on Network Discovery

    Before we map a network drive, we need to turn on the “Network Discovery” feature so that it can detect other computers in the network.

    1. Open Settings and navigate to “Network & Internet -> Sharing Options.”

    2. Under the “Network Discovery” section, select the “Turn on network discovery” option.

    How to scan mapped network drives with windows defender

    3. Click “Save Changes.”

    Mapping network drive: File Explorer

    These next steps will help you map a network drive in Windows 10 using File Explorer.

    1. Open “File Explorer” and click on “This PC” on the right pane.

    How to scan mapped network drives with windows defender

    2. Select the computer tab, and in the ribbon menu at the top, click on “Map network drive” and select “Map network drive.”

    How to scan mapped network drives with windows defender

    3. Select an alphabet to represent the drive folder from the drive drop-down list. click Browse. (The other computer has to be in the network and have the “Public folder sharing” option turned on before it shows up in the list.)

    How to scan mapped network drives with windows defender

    4. In the pop-up displayed, locate the folder you want to map, and hit the OK button after selecting it.

    How to scan mapped network drives with windows defender

    5. Once you have confirmed your selection, hit the “Finish” button at the lower-right corner. Note that on the “map network drive” window, you have the option to choose between reconnecting at signin or connecting using different credentials.

    At the end of this process, the new drive will appear any time you navigate to this PC in File Explorer, and you will be able to access its content from there.

    Mapping network drive: Command Prompt

    You can achieve the same results you did with File Explorer using the command prompt. Just follow the nest steps to map a network drive using your command prompt.

    1. Open the command prompt. You can do this simply by typing cmd and hitting the Enter key on the Run window.

    2. On your command prompt, type the following command:

    Note that “x” represents the name you want to assign to the shared folder.

    3. You can slightly tweak the above command to insert some additional parameters. You can insert a different set of credentials using the following command:

    4. After restarting the computer, the drive will no longer exist. To avoid this and make the drive permanent, you can use the command:

    5. Using the command net use x: /delete will delete the mapped drive, while using the command net use * /delete will delete all mapped drives.

    Conclusion

    Mapping a network drive in Windows 10 is really a basic process that you will find very handy when sharing files on a network. Whatever way you opt for to achieve this should depend on your personal preferences and what you find easier.

    Our latest tutorials delivered straight to your inbox

    Mapping a Network Drive or Folder in Windows 10 is easy, mapping a drive means that getting permanent access to a drive or folder which is currently residing on another computer, File server, and network storage devices in a different location. While mapping a drive windows will assign a separate drive letter to that particular drive or folder and it can be accessed with a single click on windows. Most of the corporate users benefit from this feature, in any organization or company computers are used to connect to the Domain network, and to access the domain network users need to enter the user name and password. These credentials are very mandatory to log in a system and to map a network drive. In organizations there is one policy called Maximum password age policy, this policy states that users must change the password from 70 days to 180 days, these days can be different from one organization to another. Once we change the password the windows will ask to login again, but all the old passwords are saved in windows credentials. It affects a lot of apps like outlook, one drive, and mapped networks, today in this article we are going to see how to Update Login Credentials for Mapped Network Drives on Windows 10

    Update Login Credentials for Mapped Network Drives:

    Open run command by pressing Windows + R and type control and hit enter, this will open the control panel.

    Set view by to large icons from the top right corner. Click on Credential Manager

    How to scan mapped network drives with windows defender

    Click on Windows Credentials and choose the Mapped Network drive folder name.

    Expand that credentials and choose edit, and from the next windows under Edit Generic Credentials, Enter your username and recently changed password. And save it.

    How to scan mapped network drives with windows defender

    Note: If you are mapped a lot of network drive then this method is little tedious, Editing all the mapped network drive password is little difficult so you can Remove all the credentials from the credentials manger and once you change the password windows will prompt for new credentials for mapped network and windows will automatically save the new password. Also clearing old credentials will also fix the outlook password issues.

    Network scanning can offer critical insights into devices and performance, making it easier to troubleshoot issues.

    Scanning your network regularly is important for ensuring the network and devices on it are functioning healthily. Here’s how to go about scanning your network to understand what devices are on your network, view how they’re performing, and understand the traffic moving between them. There are manual ways to perform some of these tasks, but I suggest using a network scanning tool for optimal results.

    What is Network Scanning?

    Wondering how to see all devices on the network? As the term is typically used, “network scanning” is the process allowing you to determine all active devices on your network. Active scanning is when the tool sends a ping to each device on the network and awaits a response. The scanner then looks at the responses it gets to see if there are inconsistencies or vulnerabilities.

    How to scan mapped network drives with windows defender

    For IP networks, this is often done by sending a ping to each possible IP address and getting a response to determine its status. It’s possible to manually ping your subnet to using an Address Resolution Protocol (ARP) scan. But to view all devices on the network across all subnets, your best bet is to use a tool that can automatically run scans and discover devices. Using the necessary Internet Control Message Protocol (ICMP) scan is more complicated, but it can be done—you’ll need to use echo, timestamp, or subnet mask requests. This method is often used to map network topology.

    The purpose of network scanning is to manage, maintain, and secure the system using data found by the scanner. Network scanning is used to recognize available network services, discover and recognize any filtering systems in place, look at what operating systems are in use, and to protect the network from attacks. It can also be used to determine the overall health of the network.

    What is Passive Scanning?

    Network scanning can also refer to packet sniffing, or passive scanning, which captures and tracks the traffic moving over the network in the form of data packets. If you’d like to track the packet-level traffic on your network, you’ll need to implement sensors on managed devices and applications and deploy a tool for you to easily translate packet data into intelligible and relevant information.

    How to scan mapped network drives with windows defender
    This approach looks at network information as soon as a device or system appears and starts sending messages to the network. In reality, networks release a lot of information in their normal communications, enough that passive scanners can simply look at this traffic flow, rather than pinging the devices themselves. This can help reveal traffic types, protocols, and bottlenecks within the network. It can also reveal potential security risks by catching anomalies.

    Passive scanning has some limitations, as it cannot detect devices or applications that never communicate (such as unused apps and devices) and can be vulnerable to problems caused by infected systems intentionally distributing misinformation. However, it’s an important form of network scanning and should be part of your toolkit.

    How to Use Network Scanning Tools

    Using a network scanning tool is essential if you have more than a few devices on your network, or if your network is large enough to include multiple subnets. Trying to manually manage a large network is difficult and can expose your business to major security risks. There are several different scanning tools on the market, each with a slightly different approach to the task.

    I suggest using SolarWinds ® Network Performance Monitor (NPM) with its network scanning solution to automatically scan your network. This tool primarily uses passive scanning to reveal a wide range of critical network information. It functions as a network discovery and performance management tool, allowing you to determine what devices and applications are on your network and create instant network topologies. You can scan the network information to determine whether devices are performing correctly, whether they are available, or if there are any faults in the network.

    NPM can examine and monitor multi-vendor networks, as well as providing you with visually pleasing network insights. I like the intelligent visualizations such as heat maps and comparative graphs, as it can help you understand your network from a node-by-node perspective. This helps troubleshoot and pinpoint problems or discover weak points that might be vulnerable to attacks. NPM can also scale to much larger environments and enterprises. I also find it to be intuitive for beginner users—figuring out how to use NPM isn’t difficult.

    If you’re looking for IP address network scanning, you should consider another SolarWinds tool—IP Address Manager (IPAM). This tool is more focused on managing and discovering devices based on IP information, even across subnets. In terms of tracking performance and traffic, NPM is the more robust tool, but it’s also useful to be able to manage your IP addresses, especially on a large network. If you’re looking for this kind of network scanning, I’d give IPAM a shot.

    Another passive scanning tool you should consider is Holm Security Network Scanning tool. This tool automatically and continuously scans your network to search for vulnerabilities. In particular, it looks at issues such as weak passwords, misconfigured systems, old software, and exposed services and functions. It also allows you to scan your entire network over different local environments and create a map of your network. You can then prioritize, organize, or remedy vulnerabilities.

    Similarly, if you’re looking for effective packet sniffing, Swascan Network Scan tool is also useful. First, the interface is engaging, clean, and very simple to use. With high-quality data analysis and graphs, Network Scan tool provides complex information about vulnerabilities in your network. The reports and accompanying managers can then assist you with fixing these errors through their detailed action plan.

    Network Scanning Today

    If you’re wondering how to scan your network, first take the time to understand which type of scanning you need. Managing IP addresses and devices? You might be able to get away with manual IP scanning, but there are many easy-to-use IP manager tools out there. Performing packet sniffing is more complicated but is a critical task to ensure you have network oversight. This means implementing the right sensors and a tool that translates packet data into easily readable information. To manage network issues and scan for potential problems, I recommend the SolarWinds Network Performance Monitor due to its scalability, heat map visualizations, clean interface, and an extensive set of tools.

    One thing you can do with your Windows VPS or dedicated server is map one of its folders as a network drive on your local PC. This is great if you have data on your server that you need quick access to or have data on your local PC that you would like to push to the server. This guide will show you how to map a network drive on your Cloud VPS to your local PC.

    The first step is to gather the information required for your Windows server (IP address, username, password). This information can be found in your welcome email after purchasing the server or at this link.

    After gathering your information, you will want to open your File Explorer on your local PC. You can do this by using the search bar or pressing the [Windows] + [E] keys.

    How to scan mapped network drives with windows defender

    Once you have opened your File Explorer, the next step is to right-click “Network” on the left-hand side and select “Map Network Drive” from the context menu.

    How to scan mapped network drives with windows defender

    On the following screen, it will prompt you to:

    • Select a drive letter to assign to the network drive
    • Tell your local PC where the folder is located
    • Whether or not to reconnect at sign-in (recommended)
    • Connect using different credentials than what you are currently logged in with

    When typing in the “Folder” text box, you will want to use this format:

    \\Server_IP_Address\Path\To\Folder

    Or, if you would like to map the entire C: drive of the server:

    \\Server_IP_Address\C$

    If done correctly, as long as your server is online, you will be able to access the folder you have specified with reading/write privileges.

    • Please log in to reply

    #1 Windows10User

    In my network I have a computer that acts as my file server (Running Windows 10 Pro) and the clients are also running various versions Windows 10 and 7. For some reason when I look at the File explorer, the mapped drives show as disconnected but when I click on them, they connect and they work.

    mapped drive.PNG 4.34KB 0 downloads

    Both mapped drives are hosted by the same server.

    Snapshot from a computer running Windows 10 Pro x64 version 1809

    Edited by Windows10User, 03 January 2019 – 12:27 PM.

    BC AdBot (Login to Remove)

    • BleepingComputer.com
    • Register to remove ads

    #2 xrobwx71

  • Members
  • 1,247 posts
  • OFFLINE
    • Gender: Male
    • Location: Panama City Beach, FL USA
    • Local time: 03:07 AM

    I have this same exact problem with 2 WinPro machines. I have research for over a year to find a solution. If you find one, please let us know. I am the host. If the client tries to connect, it says not available until I click it on my side and then it says connected, only then can the client connect.

    The very first thing you should always do after setting up a system? Have a valid backup image of your drives.

    #3 iJuliusz

    When I had problems with NAS, I turn on SMB1 sharing.

    I know, how can be dangerous when SMB1 is turned on.

    Try this link to read about it, there You see how to find right option to Turn on just for test in Your case.

    Different versions of Windows have more SMB1 checkboxes

    Edited by iJuliusz, 04 January 2019 – 05:08 PM.

    #4 SleepyDude

    Its a know problem of Windows 10 v1809, Microsoft released the update KB4469342 that supposedly fix that problem, make sure you have this update installed.

    Edited by SleepyDude, 04 January 2019 – 05:17 PM.

    • Please do not PM me asking for support. Post on the forums instead it will increases the chances of getting help for your problem by one of us.
    • Posts in the Malware section that are not replied to within 4 days will be closed. PM me or a moderator to reactivate.
    • Please post your final results, good or bad. We like to know! Thank you!

    Proud graduate of GeekU and member of UNITE
    ___
    Rui

    #5 Windows10User

    Its a know problem of Windows 10 v1809, Microsoft released the update KB4469342 that supposedly fix that problem, make sure you have this update installed.

    The computer is up-to-date according to Windows Update but I’ve went ahead and download the KB4469342 and it didn’t work.

    Update KB4469342.PNG 229.57KB 0 downloads

    #6 Windows10User

    When I had problems with NAS, I turn on SMB1 sharing.

    I know, how can be dangerous when SMB1 is turned on.

    Try this link to read about it, there You see how to find right option to Turn on just for test in Your case.

    Different versions of Windows have more SMB1 checkboxes

    SMB 1 on Windows 10 1809 is disabled by default and I haven’t purposely turned it on

    #7 Windows10User

    UPDATE: I’ve found that it wasn’t just Windows 10 that’s affected by this since checking my Windows 7 system showed that it also has the same issue, once the user logged in, there’s a popup saying that network drives have been disconnected.

    There’s probably a script to get it to auto connect but I can’t find it

    #8 MasterNe0

    Check your task scheduler or startup folder or create your own .bat script that will automap it.

    #9 Rocky Bennett

    UPDATE: I’ve found that it wasn’t just Windows 10 that’s affected by this since checking my Windows 7 system showed that it also has the same issue, once the user logged in, there’s a popup saying that network drives have been disconnected.

    There’s probably a script to get it to auto connect but I can’t find it

    That is also true for the behavior of most Linux distros that I have used.

    Mr. Rocky Bennett

    Linux User and Windows 10 Lover.

    #10 Rocky Bennett

    ^^^^ Playing with a few Linux distros on my system and it seems that the worse offender of this is openSUSE. This is always been one thing that bugged me about Linux but especially openSUSE.

    Mr. Rocky Bennett

    Linux User and Windows 10 Lover.

    #11 xrobwx71

  • Members
  • 1,247 posts
  • OFFLINE
    • Gender: Male
    • Location: Panama City Beach, FL USA
    • Local time: 03:07 AM

    I came across this but have yet to implement it.

    The very first thing you should always do after setting up a system? Have a valid backup image of your drives.

    #12 Rocky Bennett

    ^^^^^ Because the OP pointed out that this also happens with Windows 7 (in post #7) and I pointed out that it happens with all Linux distros, the link is not much help, but thanks.

    Mr. Rocky Bennett

    Linux User and Windows 10 Lover.

    #13 harry12

    Seems to me, I can track this problem back to XP at least. To say it is a 1809 problem is interesting, however I had

    same problem with 1803.

    #14 xrobwx71

  • Members
  • 1,247 posts
  • OFFLINE
    • Gender: Male
    • Location: Panama City Beach, FL USA
    • Local time: 03:07 AM

    ^^^^^ Because the OP pointed out that this also happens with Windows 7 (in post #7) and I pointed out that it happens with all Linux distros, the link is not much help, but thanks.

    The OP never mentioned Linux yet you did, which also wasn’t much help, but thanks.

    The very first thing you should always do after setting up a system? Have a valid backup image of your drives.

    If you have mapped a drive on your Windows 10/8/8.1/7 running computer, you expect it to show up in the File Explorer so you can interact with it and exchange files. However, for some users, that is not the actual behavior. There have been many cases where users were not able to find the mapped drives in the Explorer on their computers. The mapped drive not showing up in the Explorer is not a good thing as it just takes away your ability to interact with the drive and there’s nothing you can do when the drive itself isn’t there for you to work on. If you’re facing a situation like this, you’re likely looking for a quick solution to resolve the issue and get the mapped drive to show up in the Explorer.

    Fortunately, there are a couple of ways to get the drive to appear in the Explorer and the below guide will show you all the possible fixes for the solution. It’s worth giving a try to these fixes and see if they help you resolve the issue on your computer.

    Part 1: Edit the Registry Editor to Fix Mapped Network Drive Not Showing

    The first thing you need to do to fix the mapped drive issue is to open the registry of your computer and change a few values there. This can easily be done as shown below.

    Open registry editor on your computer by typing in regedit in the Run dialog box. When it opens, head to the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System path and right-click on the subkey. Select New followed by DWORD to create a new entry in your registry. Enter EnableLinkedConnections as the name of DWORD and press enter. Right-click on the newly created DWORD and enter 1 as its value and hit enter.

    You have successfully added an entry into your registry and now all you need to do is restart your system and your mapped drives should show up in the Explorer without any issues.

    Mapped Drives Showing Partial Content

    If you have an issue where you can see the mapped drive but you can’t see all the files and folders inside, then it may be that the files and folders you don’t see are set to be hidden. If your Explorer is not set to show hidden files, you won’t see these hidden files and folders on your system. The following should fix the issue for you.

    If you’re on Windows 10 or 8.1 or 8, just open an Explorer window and select the View tab. Then, checkmark the box that says Hidden items and your hidden folders and files will show up in the Explorer.

    If you’re on Windows 7, open a File Explorer window and head to Organize -> Folder and search options. Go to the View tab and enable the option that says Show hidden files, folders, and drives. The hidden contents should now be visible in the Explorer on your computer.

    If you still can’t get to see the hidden files and folders for some reason, then you’ll probably need to run a recovery scan to see if you can recover your hidden files. While there’s no built-in feature in Windows that allows you to run recovery scans, you can make use of a third-party app to do that. 4DDiG for Windows Data Recovery is a recovery tool that should let you find and recover files on your Windows computer. It even helps recover files in cases where you had permanently deleted files from your computer using Shift and Delete keys. The app can be downloaded from its official website and then you can install it on your computer. Once installed, you can select what kind of files you’d like to recover and it will help you recover those files on your machine. For how to use 4DDiG to recover lost data from Windows, follow the steps below:

      Download and install Tenorshare 4DDiG on your Windows PC and run it. Select the location where you want to retrieve hidden files and then click Scan to proceed.

    4DDiG will do an all-round scanning on the selected drive to find your hidden files or lost data. After the scanning, you can select data to preview.

    After you choose your target files, click Recover to save them to a safe location.

    Summary

    We hope this guide helps you fix the mapped drive not showing in Explorer issue on your Windows computer. If you want to recover any lost data from Windows/Mac/USB flash drive/SD card/External hard drive, just give it a shot to Tenorshare 4DDiG.

    Updated on 2021-09-07 / Update for Data Recovery

    Run the Windows file checker

    • Tweet
    • Share
    • Email
    • Tweet
    • Share
    • Email

    All activities, including applications such as word processors, email clients, and internet browsers, are controlled by system program files. Over time, the files can be changed or corrupted by new software installations, viruses, or problems with the hard drive. Scanning and fixing Windows system files improves the function and speed of your computer.

    Instructions in this article apply to Windows 10, Windows 8, Windows 7, and Windows Vista.

    Why Run System File Checker

    The more corrupt the system files are, the more unstable and problematic the Windows operating system will become. Windows may crash or behave differently than you expect. That is why scanning and fixing Windows system files is important.

    The System File Checker program scans all protected system files and replaces corrupted or incorrect versions with the correct Microsoft versions. This procedure can be beneficial, especially if your computer displays error messages or runs erratically.

    Run System File Checker in Windows 10, 7, and Vista

    To use the System File Checker in Windows 10, Windows 7, or Windows Vista, follow these steps:

    Close any open programs on the desktop.

    Select Start.

    Enter Command Prompt in the Search box.

    Select Run as administer.

    How to scan mapped network drives with windows defender

    Enter an administrator password, if requested to do so, or select Allow.

    At the Command Prompt, enter SFC /SCANNOW.

    How to scan mapped network drives with windows defender

    Press Enter to begin the scan of all protected system files.

    How to scan mapped network drives with windows defender

    Do not close the Command Prompt window until the scan is 100% complete.

    Run System File Checker in Windows 8.1 and 8

    To use the System File Check program in Windows 8.1 or Windows 8, follow these steps:

    Close any open programs on the desktop.

    Point to the lower-right corner of the screen, and select Search, or swipe from the right edge of the screen, and select Search.

    Enter Command Prompt in the Search box.

    Right-click Command Prompt, and select Run as administrator.

    How to scan mapped network drives with windows defender

    Enter an administrator password, if requested to do so, or select Allow.

    At the Command Prompt, enter SFC /SCANNOW.

    How to scan mapped network drives with windows defender

    Press Enter to begin the scan of all protected system files.

    Do not close the Command Prompt window until the scan is 100% complete.

    Allow System File Checker to Work

    It may take from 30 minutes to a couple of hours for the System File Checker to scan and fix the Windows system files. It works fastest if you don’t use the computer during this process. If you continue to use the PC, performance will be slow.

    When the scan is complete, you will likely receive one of the following messages:

    As a final solution on this, the mapped drives are OK after setting the login script to “net use x: /delete” followed by “net use x: \\server\share”

    19 Replies

    Anything in the event viewer. It should give some insight as to why it can’t reconnect the drive

    Is this the issue where they show the “red X” but if you click on the drive you can actually access it? Its not an issue where the drive becomes un-mapped right? If that’s the issue then I’ve seen this a few times and I don’t believe they are actually disconnected even if the GUI shows that. Have you tried ” net use” to see if mapping it that way makes any difference?

    Anything in the event viewer. It should give some insight as to why it can’t reconnect the drive

    Not that I can see; the event logs are pretty clean, the odd CLSID error and some other random stuff, but nothing even remotely related to networking or file and printer sharing.

    Is this the issue where they show the “red X” but if you click on the drive you can actually access it? Its not an issue where the drive becomes un-mapped right? If that’s the issue then I’ve seen this a few times and I don’t believe they are actually disconnected even if the GUI shows that. Have you tried ” net use” to see if mapping it that way makes any difference?

    I discovered that red X issue in my research but my understanding is it’s just a visual indicator and the mapped drives still work, and the red X remains even after clicking on it? I don’t think this is related because the drives don’t actually work until someone clicks on the drive in File Explorer, and when you click it the red X disappears. There are desktop shortcuts and applications which use the mapped drives and they won’t work until the drive is reconnected.

    Now that you mention it, I haven’t actually tried removing and re-mapping the drives. I will give that a shot, thanks.

    Network Drive is a virtual storage device that is mapped to your computer that usually located on a server or a Network Attached Storage (NAS) device. You can access this mapped network drive using LAN from within a business or home. If you are working in a corporate environment then you may familiar with network share drive, you may have access to the company network drive, to share company-related files. Network Drive is like a hard drive but the data is shared among the LAN Network. In Windows to access any Network Drive first you have to Map a Network drive, mapping a Network Drive means accessing a Particular Shared folder on a network, Sharing folder means that particular folder is accessible by another computer over the network, this can be achieved by FTP protocol.

    Sharing can be applied to any folder or drive. If you want to access any files or folders from another computer you can directly enter the network drive location in run command and hit enter. Know more about mapping a network Drive . Accessing Documents and files on a Network Share drive is completely based on network, so if you have a fast connection then you can access or copy the file from the network drive quickly. If you are facing slowness while accessing documents or files on a Network Share drive then this article will guide you to fix slow access to Network drive.

    Table of Contents

    Fix slow access to Network drive:

    If you faced any slowness while accessing files and folders from the network shared drive which mapped to your computer in windows 10, apply the below-mentioned solution one by one.

    Check the Network Speed:

    As I mentioned above the Network drive speed depends on the network speed, if you are having a slow internet connection then you will feel slowness while accessing Network Drive, There are many ways to check the Network speed, most of them use Google for internet speed test. Check your network speed here .

    Using Registry Editor:

    Note: Modifying the Registry is risky, and it causes irreversible damage to your OS Installation Follow the steps correctly. Friendly advice Before Modifying Registry Creating Restore Point is recommended.

    Open Run command by pressing Windows + R and type Regedit and hit enter this will open the registry editor console.

    Now Navigate to the following path

    HKLM\System\CurrentControlSet\Services\LanmanWorkstation\Parameters

    From the left-hand side click on the Parameters registry key, then from the Right-hand side search for DirectoryCacheLifetime DWORD.

    If you are not able to find that key then you have to create it, Right-click on the empty area, and choose New > DWORD (32-bit) value. Name the DWORD to DirectoryCacheLifetime.

    Double click on DirectoryCacheLifetime and modify the value to 0 and click on OK.

    How to scan mapped network drives with windows defender

    Restart the PC once to make it effective. If you are still facing Slowness then you have to modify the value for the additional two SMB cache values which is mentioned below.

    • FileInfoCacheLifetime
    • FileNotFoundCacheLifetime

    If you are not able to find these DWORDs then you have to create it. Follow the above-mentioned steps to create it and set the Value to Zero 0. Find More about SMB cache Values .

    This post shows students and new users steps to map network shares as a drive in Windows 11.

    In a work environment, there might be shared network resources that most people frequently access. If you find yourself in the same situation, then mapping the shared network resource should be something to consider.

    When you mapped a shared network resource, it is assigned a drive letter on your local computer. You can then easily access the shared location simply by going to your computer folder and clicking on the assigned drive letter to access the network location.

    The new Windows 11, when released generally to everyone, will come with many new features and enhancements that will work great for some while adding some learning challenges for others. Some things and settings have changed so much that folks will have to learn new ways to work with and manage Windows 11.

    For users who have worked in previous versions of Windows, mapping a network folder should be much different. Windows 11, with all the new features, mapping is still the same process as in previous versions.

    To get started with mapping network drives in Windows 11, follow the steps below:

    How to map a network location in Windows 11

    As mentioned above, if you find yourself access a network location frequently, you can map that location to your local computer for quick and easy access.

    In Windows, network resources are typically accessed via File Explorer. You open File Explorer and type the resource network path in the browser box, similar to the image below:

    Some users will create shortcuts by copying and pasting the network folder on their desktop. This is not the way to do it.

    A better way will be to create a network drive for the shared resource. To do that, open File Explorer, then click on the ellipsis (three dot) in the toolbar menu and click Map network drive as highlighted below:

    When the pop windows opens, pick a drive letter from the list of available letters. By default the letter Z is automatically assigned if it has not been taken.

    If you don’t want the letter Z, then you might want to consider using something high-up so that the mapped network drive won’t interfere with any removable storage you add to your PC.

    In the Folder field, type the network resource path in there. You can also use the browse button to browse to the network location and select it.

    If you need a separate password to access the network location, then check the box to Connect using different credentials. Only check this box if your current username and password won’t allow you to access the network location.

    When you’re all done, click Finish.

    When you’re done, a new network drive will be mapped to your local computer. Next time you want to access the Accounting folder, simply go to your local computer and click on the Z drive.

    That should do it.

    If you run into issues where you can’t access a shared folder, you might want to read the post below to enable Network Discovery and sharing in Windows 11.

    Conclusion:

    This post showed you how to map a network drive in Windows 11. If you find any error above, please use the comment form below to report.

    Published by Richard

    Hi, I’m Richard. In my spare time, I research topics that are interesting and worthwhile for users and students who want to try something new. I, too, am a student and my focus here is to help other students and new users get started with managing Ubuntu Linux, Windows, Content Management Systems (CMS) and others. I try to do my best explaining the topics and detailing the instructions so that anyone can understand. These tutorials may not work in all situations and for all users. However, if you run into trouble, please ask your questions below and I or someone from the community may help you resolve. Thanks for reading and hope you come back.

    Leave a Comment Cancel reply

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Microsoft brings malware scanning to firmware on Windows 10 PCs.

    Liam Tung is a full-time freelance technology journalist who writes for several Australian publications.

    Microsoft has been building firmware-level defenses into Windows 10 Secured-Core PCs for the enterprise, and now it’s bringing similar capabilities to its enterprise antivirus software, Microsoft Defender Advanced Threat Protection (ATP).

    Secured-core PCs include a handful of Windows 10 PCs, including the Surface Pro X, HP Elite Dragonfly, Dell Latitude 7400, and fourth-generation Lenovo ThinkPad X1 Yoga.

    Windows 10

    • Here’s how you can still get a free Windows 10 upgrade
    • The top Windows laptops compared
    • Not ready to upgrade to Windows 11? Do this instead
    • The best keyboards: Because you deserve better

    One of the key hardware-level protections these offer is kernel Direct Memory Access (DMA) protection, which can mitigate hands-on attacks that exploit, for example, the Thunderbolt interface to steal data from memory.

    Others include Trusted Platform Module (TPM), virtualization-based security, Windows Defender System guard, hypervisor-protected code integrity (HVCI), and tools to block unverified code execution.

    This breed of PCs are aimed at organizations in the sights of state-backed hackers, such as the Russian group, Fancy Bear, and some recent strains of ransomware.

    The new Unified Extensible Firmware Interface (UEFI) scanner in Windows Defender ATP scans the interface between the operating system and firmware, making a security feature that was previously exclusive to Secured-Core Windows 10 PCs is now available more broadly.

    The scanner should detect when a rootkit or other malware tampers with code used to boot a PC by employing information from motherboard manufacturers.

    “The UEFI scanner is a new component of the built-in antivirus solution on Windows 10 and gives Microsoft Defender ATP the unique ability to scan inside the firmware filesystem and perform security assessment,” the Microsoft Defender ATP team says in a blogpost.

    “It integrates insights from our partner chipset manufacturers and further expands the comprehensive endpoint protection provided by Microsoft Defender ATP.”

    As Microsoft explains, the UEFI scanner can help spot attacks that exploit machines where secure boot is disabled or the motherboard chipset is misconfigured.

    By altering the firmware or UEFI drivers, attackers can do bad things like disabling antivirus, all below the visibility of traditional antivirus and the operating system.

    The UEFI scanner runs an analysis on the firmware it gets from the Serial Peripheral Interface (SPI) flash storage, which isn’t an easy task given that the firmware isn’t accessible from the main memory of a machine.

    “By obtaining the firmware, the scanner is able to parse the firmware, enabling Microsoft Defender ATP to inspect firmware content at runtime,” Microsoft says.