How to open old web pages in internet explorer on windows 10

Chris Hoffman is Editor-in-Chief of How-To Geek. He’s written about technology for over a decade and was a PCWorld columnist for two years. Chris has written for The New York Times and Reader’s Digest, been interviewed as a technology expert on TV stations like Miami’s NBC 6, and had his work covered by news outlets like the BBC. Since 2011, Chris has written over 2,000 articles that have been read nearly one billion times—and that’s just here at How-To Geek. Read more.

It’s 2019, but some businesses and government agencies still have old websites that don’t function correctly in new web browsers. Windows 10 still includes Internet Explorer 11 and Microsoft has committed to supporting it with security updates.

We recommend avoiding Internet Explorer when possible. It’s old and outdated. It doesn’t include modern web features and is likely easier to attack than modern web browsers. Only use it when necessary—which, for most people, shouldn’t be much.

Even Microsoft recommends avoiding IE and encourages you to use Microsoft Edge instead. Microsoft’s Chris Jackson has called Internet Explorer a “compatibility solution“—not a modern web browser you should use.

How to Open a Web Page in IE From Edge

If you use Microsoft Edge, you can quickly open web pages in Internet Explorer when necessary.

To do so, click menu > More Tools > Open with Internet Explorer. Edge will launch IE and open the current web page.

How to Launch Internet Explorer on Windows 10

You don’t have to use Edge to launch IE. You can launch Internet Explorer and use it normally. You’ll find Internet Explorer in your Start menu.

To launch Internet Explorer on Windows 10, click the Start button, search for “Internet Explorer,” and press Enter or click the “Internet Explorer” shortcut.

If you use IE a lot, you can pin it to your taskbar, turn it into a tile on your Start menu, or create a desktop shortcut to it.

Don’t see Internet Explorer in your Start menu? The IE feature may be removed—it’s installed by default, but you’re free to remove it.

Head to Control Panel > Programs > Turn Windows features on or off. (You can launch the Control Panel by searching for it in the Start menu, too.) Ensure “Internet Explorer 11” is checked in the list of features here and click “OK.”

How to Automatically Open Specific Websites in IE

For system administrators, Windows 10 offers an “Enterprise Mode” feature. Administrators can add a list of websites to the Enterprise Mode list. When a user visits a site on the list in Microsoft Edge, Edge will automatically open that web page in Internet Explorer 11.

This lets users use the Microsoft Edge browser normally. Rather than manually launching IE, Edge will automatically launch IE when they navigate to a website that requires Internet Explorer.

This option is part of Windows Group Policy. You’ll find the “Configure the Enterprise Mode Site List” option at Computer Configuration\Administrative Templates\Windows Components\Microsoft Edge\.

This will all likely change a bit with the launch of the new Microsoft Edge. It’ll be based on Chromium, the open-source project that forms the basis of the Google Chrome web browser. But Internet Explorer, in some form, is set to be part of Windows 10 for the foreseeable future. It’s still necessary for websites that require ActiveX and browser helper objects.

IE may soon be the best way to use old websites that require Adobe Flash on Windows soon, too.

It’s already 2019, but some businesses and government agencies still use the old site, not working properly in new web browsers. This article will show you how to open an old website in Internet Explorer on Windows 10.

  • Ways to uninstall Internet Explorer 8 on Windows XP / Vista / 7
  • Instructions to remove Internet Explorer 10 in Windows 8

It’s already 2019, but some businesses and government agencies still use the old site, not working properly in new web browsers. Windows 10 still uses Internet Explorer 11 and Microsoft is committed to supporting it with security updates.

Everyone is advised to avoid Internet Explorer because it is old and outdated. It does not have modern web features and is more vulnerable to attacks than current web browsers. You should only use it when necessary, it is best not to use it much.

Even Microsoft advises users to stay away from Internet Explorer and encourage the use of Microsoft Edge. This article will show you how to open an old website in Internet Explorer on Windows 10.

Instructions for opening old websites in Internet Explorer

  1. How to open a web page in Internet Explorer from Edge
  2. How to launch Internet Explorer on Windows 10
  3. How to automatically open a specific website in Internet Explorer

How to open a web page in Internet Explorer from Edge

If you use Microsoft Edge, you can quickly open web pages in Internet Explorer when needed.

To do so, click on menu> More Tools> Open with Internet Explorer . Edge will launch Internet Explorer and open the current web page.

How to launch Internet Explorer on Windows 10

You do not have to use Edge to launch Internet Explorer. You can launch it and use it as usual.

To start Internet Explorer, click on the Start button, find Internet Explorer and press Enter or click the Internet Explorer shortcut.

If you use IE regularly, you can pin the application to the Taskbar, turn it into a tile on the Start menu or create a desktop shortcut.

If Internet Explorer is not found in the Start menu, it is possible that the IE feature has been removed. It is installed by default but you can delete it.

  1. Instructions on how to remove Internet Explorer on Windows 10

Go to Control Panel> Programs> Turn Windows features on or off . You can launch the Control Panel by searching for it in the Start menu. Make sure Internet Explorer 11 is selected in the feature list, click OK .

How to automatically open a specific website in Internet Explorer

For system administrators, Windows 10 provides Enterprise Mode features. Administrators can add sites to the Enterprise Mode list. When a user visits a site on this list in Microsoft Edge, Edge automatically opens that site in Internet Explorer 11.

This allows users to use Microsoft Edge browser as usual. Instead of starting IE manually, Edge automatically launches Internet Explorer when they navigate to a web page that requires Internet Explorer.

This option is part of Windows Group Policy. You need to find the Configure Enterprise Mode Site List option at Computer Configuration Administrative TemplatesWindows ComponentsMicrosoft Edge.

This may change slightly with the launch of Microsoft Edge based on Chromium, an open source project that forms the cornerstone of the Google Chrome web browser. But Internet Explorer is set to be part of Windows 10 in the near future. It is still needed for sites that require ActiveX and browser helper objects. IE is also the best way to use old websites that require Adobe Flash on Windows.

The Internet Explorer 11 desktop application has retired and is out of support as of June 15, 2022 for certain versions of Windows 10.

  • You can still access older, legacy sites that require Internet Explorer with Internet Explorer mode in Microsoft Edge. Learn how >
  • The Internet Explorer 11 desktop application will progressively redirect to the faster, more secure Microsoft Edge browser, and will ultimately be disabled via Windows Update. Disable IE today>

This article explains how to configure easy access to Internet Explorer mode (IE mode) and allow the use of local site lists in your organization.

This article applies to Microsoft Edge version 92 or later.


Windows 10, version 1909 – KB5003974 and KB5003698 or later

Windows 10, version 2004; Windows 10, version 20H2 and Windows 10, version 21H – KB5005260 and KB5005101 or later

Microsoft Edge version 92 (92.0.902.55 or later)

This local site list feature isn’t supported on Windows Server 2016 at this time.


IE mode is powered by the configuration of the Enterprise Mode Site List. While you are identifying and configuring sites on the site list to use IE mode, your users no longer need to wait or fall back to the standalone IE11 application.

Starting with Microsoft Edge version 92, repeated access to unconfigured IE mode sites is easier. Users can reload sites in IE mode. They can add these sites to their local site list to automatically render in IE mode for 30 days, while the organization’s site list gets updated. When IE11 is disabled in your environment, your users are no longer solely dependent on the organization’s site list.

You can configure this experience through group policies for your organization.

An unconfigured site is one that requires IE mode but isn’t configured to open in IE mode in the Enterprise Mode Site List.

Enable the local site list experience

To enable the local site list experience, users can go to the URL edge://settings/defaultBrowser and set Allow sites to be reloaded in Internet Explorer mode to Allow.

If you have enabled IE mode testing through the InternetExplorerIntegrationTestingAllowed policy, you will see this setting, but it will be greyed out unless you explicitly enable the InternetExplorerIntegrationReloadInIEModeAllowed policy.

If Allow sites to be reloaded in Internet Explorer mode is set to Default, users might be able to reload sites in IE mode if they have existing Internet Explorer 11 usage.

When this setting is enabled, users can reload a site in IE mode by selecting Settings and more (the ellipses icon . ) > Reload in Internet Explorer mode. Users can also select Reload tab in Internet Explorer mode when they right-click on a tab or choose Open link in new Internet Explorer mode tab when they right-click on a link.

The Reload in Internet Explorer mode icon can be pinned to the toolbar. The toolbar button allows users to easily enter and exit IE mode and can be managed through the edge://settings/appearance URL.

If the user is on a site that’s already in the organization’s Enterprise Mode Site List, options to Reload in (or Exit) Internet Explorer mode will be visible but greyed out.

When the option is selected, the site reloads in IE mode. The IE mode indicator icon is visible to the left of the address bar and the flyout shows an option that users can toggle to Open the page in Internet Explorer mode next time. This adds the specific page the user is on to the local site list and will automatically open in IE mode for the next 30 days.

After a site has been reloaded in IE mode, “in-page” navigation will stay in IE mode (for example, a link, script, a form on the page, or a server-side redirect from another “in-page” navigation).

While in IE mode, users will see a banner indicating they are in IE mode, the option to Leave IE mode and to pin the IE mode icon to the toolbar (if it isn’t pinned already).

Users can choose to exit from IE mode using the Leave button on the banner, the pinned IE mode icon or Settings and more (the ellipses icon . ) > Exit Internet Explorer mode, otherwise Microsoft Edge will automatically exit from IE mode when a navigation that isn’t “in-page” occurs (for example, using the address bar, the back button, or a favorite link).

Entries remain on the local site list for a default period of 30 days. We recommend you configure legacy sites for your organization in the Enterprise Mode Site List. The local site list will ensure that users can continue their workflow without being interrupted while the organization’s site list gets updated. On day 31, when users navigate to the site, they will see a banner explaining that the site will no longer load in IE mode. Users can add it back to the local site list if they so choose.

Policies to configure the use of local site lists for IE mode

Two group policies are available to configure the local site list experience in Microsoft Edge. These policies are:

Policy: InternetExplorerIntegrationReloadInIEModeAllowed

This policy corresponds to the Microsoft Edge setting “Allow sites to be reloaded in Internet Explorer mode”. You can access this setting by going to the edge://settings/defaultbrowser URL.

If you enable this policy, users can reload a site in IE mode by selecting Settings and more (the ellipses icon . > Reload in Internet Explorer mode. Users can also select Reload tab in Internet Explorer mode when they right-click on a tab, or choose Open link in new Internet Explorer mode tab when they right click on a link. Users can optionally tell Microsoft Edge to use IE mode for the site in the future. This choice will be remembered for a default of 30 days and can be managed using the policy InternetExplorerIntegrationLocalSiteListExpirationDays.

If you disable this policy, users will not be allowed to reload an unconfigured site in IE mode.

If you don’t configure this policy, we will show users options to reload unconfigured sites in IE mode depending on recent Internet Explorer 11 usage.

Note that this policy takes precedence over how you configured the InternetExplorerIntegrationTestingAllowed policy and that policy will be disabled.

Policy: InternetExplorerIntegrationLocalSiteListExpirationDays

This policy can be used to adjust the number of days that a site remains on the local site list for users.

If you disable or don’t configure this policy, a default value of 30 days is used.

If you enable the policy, you must enter a value between 0-90 days to keep the site on a user’s local site list.

This policy has no effect if you disabled the InternetExplorerIntegrationReloadInIEModeAllowed policy.

The local site list currently doesn’t sync across devices. This improvement is currently in our backlog and we’ll update this feature when it’s available.

They are still a large number of users using Internet Explorer, and many of them have reported getting the error Internet Explorer cannot display the webpage. when they try to access a website on IE. This error stops Internet Explorer from accessing any websites. Since the error doesn’t tell why it is not able to open the site, we’ll have to make some assumptions and proceed forward with it’s troubleshooting. The issue behind this error can be a software issue isolated to the internet explorer or a connectivity issue therefore affecting your whole system.

Before you go ahead with the methods below, make sure that your Internet Connection is WORKING , and there are no VPNs running on your system, also it would be best to disable any antivirus or firewall software you are running until the issue is fixed. The methods listed in this guide are in the most worked order to save you time and energies. If the issue is fixed at by any Method, then you don’t need to go ahead with the other methods.

Method 1: Reset Internet Explorer

This will reset all settings and custom options set in Internet Explorer. Your bookmarks will not be deleted.

Hold the Windows Key and Press R. In the Run Dialog, type inetcpl.cpl and Click OK.

Click on the Advanced tab. Click on the Reset button below. Place a check next to Delete Personal Settings and click Reset. Internet Explorer will now be reset to its default settings.

After the Internet Explorer has been resetted, re-open it and test. To restore Bookmarks Bar, hold the CTRL + SHIFT + B keys.

Method 2: Verify Proxy Settings

Invalid proxy settings can cause internet explorer to deviate from the right path, thus giving this error. To verify the settings. Close Internet Explorer.

Hold the Windows Key and Press R. In the Run Dialog, type inetcpl.cpl and Click OK.

Go to the Connections tab. Once on the tab, click on the LAN settings button.

Make sure there is a check next to Automatically detect settings and the other two checkboxes are unchecked.Click OK and close all windows. Restart Internet Explorer.

Method 3: Check IP Address

IP Address conflicts and incorrect settings can restrict access to the Internet, which can also trigger the “cannot display webpage” error. To fix it,

Hold the Windows Key and press R. In the run dialog type ncpa.cpl and Click OK.

Right click on Local Area Connection if you are using Wired Connection or Right click on Wireless Network Connection if you are using Wi-Fi. Click on Properties in the drop down menu.

Double click on Internet Protocol Version 4 (TCP/IPv4). Select Obtain an IP address automatically. Select Obtain DNS server address automatically. Click OK > OK and close all windows. Restart your system. If the problem still persists, move on to the next solution.

Method 4: Reboot Router/Modem

You router may have a glitch with establishing a connection with your ISP. However, if your other devices such as smart-phones, tablets and other computers etc are connected to internet via Wi-Fi or Ethernet to this router, then the router is getting the internet. A reboot of the router is still preferred.

To do this, Turn off your router and unplug it from the power adapter.

After 30 seconds, plug the adapter back into your router and turn it on.

Now test and see if the issue is fixed.

Method 5: Reset Windows Socket TCP/IP Stack

Windows socket is the program responsible for handling all the network incoming and outgoing requests by program like Internet Explorer. If there is an issue with it, resetting it can fix it easily.

To do so, press Windows key and type cmd, right click cmd and choose Run as administrator.

In the black command prompt window, type the following commands and press Enter after each:

nbtstat -R

nbtstat -RR

netsh int reset all

netsh int ip reset

netsh winsock reset

Reboot your system for changes to take effect.

Method 6: Disable Enhanced Protected Mode (For Windows 8)

In Windows 8, Enhance Protected mode was added to Internet explorer 10 which increases security but is known to cause such kind of browsing issues.

Tabbed browsing is a really helpful element of modern Web browsers that lets you keep multiple Web pages open at the same time. Most browsers, including Internet Explorer, make it easy for you to create new tabs at any time.

If you are often opening the same pages whenever you start Internet Explorer, then you might be looking for a way to start the browser with all of those tabs already open. Fortunately Internet Explorer lets you set custom Home pages, and one of the options for that feature lets you set multiple Home pages that will appear in separate tabs when you start the browser.

How to Set Multiple Home Page Tabs in Internet Explorer

The steps in this article were performed in Microsoft Internet Explorer 11. Once you complete this guide you will have configured Internet Explorer so that it opens with multiple tabs open, each of which contains a page that you specify.

Step 1: Open Internet Explorer.

Step 2: Select the Tools button at the top-right of the window.

Step 3: Choose the Internet Options button.

Step 4: Type the addresses of the Web pages that you want to use as your startup tabs into the Home page field at the top of this window. Note that each separate tab must start on its own line.

Step 5: Click the Apply button at the bottom of the window, followed by the OK button.

Now if you close Internet Explorer and reopen it, the browser should start up with a tab open for each Web page that you just specified.

Have you ever needed to access a pop-up window in Internet Explorer, but they keep getting blocked? Find out how to turn off the Internet Explorer pop-up blocker so that you can access the page that you need.

Matthew Burleigh has been writing tech tutorials since 2008. His writing has appeared on dozens of different websites and been read over 50 million times.

After receiving his Bachelor’s and Master’s degrees in Computer Science he spent several years working in IT management for small businesses. However, he now works full time writing content online and creating websites.

His main writing topics include iPhones, Microsoft Office, Google Apps, Android, and Photoshop, but he has also written about many other tech topics as well.

Sometimes when you try to use your browser to access websites, the web pages don’t respond even if your system is connected to an internet connection. This often occurs when users upgrade to Windows 10 or it can occur out of the blue due to some obvious reasons, that are mentioned below. This can be really frustrating and confusing as your machine has an internet connection but still isn’t able to reach websites.

This issue was mostly reported on Windows 10, however, there have been reports that it occurred to some users back in the time of Windows 7 etc. The issue is not huge and the obstacle can be easily overcome by applying a few simple solutions which are mentioned in this article.

What causes Web Pages to not Respond on Windows 10?

Well, this can be due to a number of factors and from what we have salvaged, it usually occurs due to:

  • Third-party software. In some cases, the problem can be caused by the third-party software that you have installed on your machine which is interfering with your network settings.
  • Outdated Network drivers. If your network drivers are outdated and you haven’t installed the latest drivers for your network adapter, it can cause the issue.
  • Incorrect MTU. Sometimes a new Windows 10 installation can set the wrong MTU due to which the issue is caused.

To solve your problem, you can use the following workarounds:

Solution 1: Run Network Troubleshooter

To start off, you should run the Windows Internet Connection troubleshooter before doing anything else. The troubleshooter can potentially detect driver related or any other issue which is causing the problem and fix it. Therefore, running the Network troubleshooter deserves a shot. Here’s how:

  1. Open Settings by pressing Winkey + I.
  2. Go to Update and Security.
  3. Switch to the Troubleshoot tab on the left-hand side.
  4. Select ‘Internet Connections’ and click ‘Run the troubleshooter’. Windows Network Troubleshooter

Solution 2: Resetting TCP/IP

Transmission Control Protocol, also known as TCP, is responsible for establishing a connection between two hosts i.e your machine and the server. Sometimes, the issue can be due to malfunctioning TCP/IP settings in which case you’ll have to reset it. Here’s how to do it:

  1. Press Windows Key + X and select Command Prompt (Admin) from the list to open an elevated command prompt.
  2. Type in the following command: Resetting TCP/IP
  3. After you’ve executed the above command, enter the following commands: Resetting Winsock
  4. Reboot your system and try accessing a website.

Solution 3: Update your Network Drivers

Another way to resolve your issue would be to update your Network drivers. If your network drivers are outdated, it can cause the issue in which case you’ll have to update it to the latest version. Here’s how:

  1. Go to Start Menu, type in Device Manager and open it up.
  2. Expand the Network Adapters list.
  3. Right-click on your network adapter driver and select ‘Update driver’.
  4. Click ‘Search automatically for updated driver software’. Updating Network Driver
  5. Wait for it to complete.
  6. Restart your machine and try to load a web page.

Solution 4: Uninstall Third-party Software

Some users have reported that their issue was occurring due to the third-party software installed on their system. Uninstalling the software seems to have fixed the issue, therefore, make sure to uninstall any third-party software like your antivirus etc. Once you have uninstalled the software, restart your system and then check if it has fixed your problem.

If you are confused about uninstalling the apps that are installed on your system, we have an alternate solution for you. You can try performing a Safe Boot and then try to access a web page. Safe Boot loads up your system using the most limited set of files or drivers.

You can learn how to perform a Safe Boot here.

Solution 5: Changing MTU

There have been reports stating that the issue was caused due to wrong MTU value set by Windows 10. Maximum Transmission Unit or MTU is the largest amount of packet that is allowed to be sent over a transmission. Sometimes, Windows 10 sets MTU to 1500 which can cause the problem and needs to be changed to 1432. Here’s how to change it:

  1. First of all, download TCP Optimizer tool from here.
  2. Once the tool has been downloaded, right-click on it and select ‘Run as an administrator’.
  3. In the bottom, select ‘Custom’ in front of ‘Choose settings’.
  4. Then, change the MTU value to 1432. Changing the MTU Value in TCP Optimizer
  5. Hit ‘Apply changes’.
  6. Reboot your system and your problem should be fixed.

#1 think2green420

BC AdBot (Login to Remove)

#2 Jacee

  • Malware Response Team
  • 3,716 posts
    • Gender: Female
    • Local time: 09:14 AM

    MS MVP Windows-Security 2006-2016
    Member of UNITE, the Unified Network of Instructors and Trusted Eliminators

    #3 think2green420

    #4 think2green420

    #5 Jacee

  • Malware Response Team
  • 3,716 posts
    • Gender: Female
    • Local time: 09:14 AM

    Have you tried to set your ‘Default’ programs from the Control Panel?

    Click to open Default Programs.

    In Default Programs, you can:

    Set your default programs. Use this option to choose which programs you want
    Windows to use by default. If you want to use your media player to open all
    media files, use this option.

    The options you set here only apply to your user account. Your choices won’t
    affect other user accounts on the computer. To change program access for all
    users on this computer, see Change default programs using Set Program Access
    and Computer Defaults.

    MS MVP Windows-Security 2006-2016
    Member of UNITE, the Unified Network of Instructors and Trusted Eliminators

    When you open a Web browser window you might be accustomed to seeing a blank tab, or possibly a specific home page.

    But you can actually configure Microsoft Edge so that it launches with the pages that were open the last time you closed the browser.

    Our tutorial below will show you where to find and change this setting if this is something that you think you would like.

    How to Relaunch Microsoft Edge with Pages that Were Open

    1. Open Edge.
    2. Click the three dots at the top-right.
    3. Select Settings.
    4. Choose the Start, home, and new tabs option.
    5. Select the Open tabs from the previous session option.

    Our guide continues below with additional information on how to have Microsoft Edge restart with the pages that you had open when it last closed, including pictures of these steps.

    The way that your Web browser functions is as an important of a setting as almost anything on your computer. For many users the Web browser is the most important application that they use on most days.

    If you have been using Microsoft Edge without changing any of the settings, then it’s likely that the browser is opening with the Microsoft Start page. However, this is something that you can adjust.

    Our tutorial below will show you how to change this setting so that you can make Edge open with the pages that you were visiting the last time you closed the browser.

    Our tutorial on how to view saved passwords on Google Chrome can help you to find passwords that you have chosen to save for websites in that browser.

    How to Open Edge with the Pages that Were Open When it Closed (Guide with Pictures)

    The steps in this article were performed in the desktop version of Windows 10. Note that adjusting this setting for Edge will not affect the settings for any other browsers that you may have installed on your computer, such as Firefox or Chrome.

    Step 1: Launch Microsoft Edge.

    Step 2: Click the icon with the three dots at the top-right of the window.

    Step 3: Select Settings at the bottom of this menu.

    Step 4: Click the dropdown menu under Open Microsoft Edge with, then choose the Previous pages option.

    Now that you know how to open Microsoft Edge with previous pages you will be able to close the browser confidently, knowing that the pages that you were previously viewing are going to be there the next time you launch Edge.

    You can then click back on the current Web page you have open to exit this menu. The next time you close Edge then reopen it, then pages that are displayed will be the ones that were open when you last closed it, allowing you to pick up where you left off.

    Is there an extension that you would like to be using, such as a password manager or an ad blocker? Find out how to install an extension in Edge to gain the extra functionality that the extension provides.

    Additional Sources

    Matthew Burleigh has been writing tech tutorials since 2008. His writing has appeared on dozens of different websites and been read over 50 million times.

    After receiving his Bachelor’s and Master’s degrees in Computer Science he spent several years working in IT management for small businesses. However, he now works full time writing content online and creating websites.

    His main writing topics include iPhones, Microsoft Office, Google Apps, Android, and Photoshop, but he has also written about many other tech topics as well.

    If you can connect to the Internet, but no web pages open when connected, follow the steps below.

    Ping an Internet address

    1. Open the Command Prompt.
    2. At the prompt, type ping and press Enter .

    No response from

    If you do not receive a response, try pinging the IP address by typing the command ping at the prompt.

    Response from IP

    If you receive a response from the IP address, but not the domain, you have a DNS problem. Open your router configuration and make sure the DNS address and other addresses for your ISP (Internet service provider) are correct.

    No response from IP

    If you get no response from the IP address and the address, something is wrong with your network. If you are on a home network, unplug the power to your router and broadband modem. Leave them unplugged for ten seconds and then plug them in again. After the modem and router have powered up and re-connected, test your Internet again.

    If resetting the power to the devices still does not help, open your router configuration and make sure the settings for your ISP are right. You can contact your ISP for help with making sure the router settings are correct.

    If this is a corporate network, contact the network administrator, as there may be a problem with the network that only they can resolve.

    I receive a response or packets from

    If you receive a response or packets from, try opening in your Internet browser. If opens, but another web page doesn’t open, it’s a problem with that page or a filter is preventing the page from opening. See the following link for help with testing if a website is down or accessible through your network.

    If does not open in your browser, try an alternative browser. For example, if you are using Internet Explorer, try opening in a different browser, like Firefox or Chrome. If opens in an alternative browser, but not your primary browser, it is a problem with your browser and not your Internet.

    Web pages not opening in any Internet browser

    If web pages will not open in any Internet browser, your computer may have a virus or malware infection. Some viruses and malware prevents web pages from opening or loading in any Internet browser. We recommend you check for and remove viruses or malware on your computer. If malware is found and cleaned, it may resolve the issue and allow you to open web pages again.

    Another option is to access the Safe Mode with Networking option for Windows and try opening a web page in any Internet browser. If you can successfully open a web page in safe mode, the issue may be a process that only runs in normal Windows mode. For instance, this may be a defective device driver, or a network setting that is only active in normal Windows mode. It may also indicate a virus or malware infection, as some viruses and malware are not active in safe mode.

    Microsoft IE 11 End of Life

    Microsoft IE 11 support for Windows 10 machines is ending June 15th. After that date, attempts to open IE 11 will redirect to opening in Microsoft Edge.

    This document describes how to uninstall an updated version of Internet Explorer in order to return to the previous version, as well as how to prevent IE from updating in the future.

    NOTE: The Help Desk suggests first trying compatibility mode in IE when troubleshooting web compatibility issues. For information on enabling this for certain websites, please see Internet Explorer – Using Compatibility View.

    Because many web-based applications require certain versions of Internet Explorer to work, you may find that a recent upgrade to IE is not compatible with an application you need to use. If this should occur, you can opt to downgrade IE to a previous version you had installed. By uninstalling the update, the previous version you were running will be automatically restored.

    Uninstalling the Update

    Open the Start Menu (Windows Vista and 7) or the Start Screen (Windows 8). In the search field, type Programs and Features. Click Programs and Features when it appears in the search results.

    You will be brought to the “Uninstall or change a program” window. In the left-hand panel, select View installed updates.

    Wait a few moments for the list to populate, then scroll down until you see the Microsoft Windows heading. Scan the sublist for the Internet Explorer version you would like to remove. Once you have located it, click once to highlight the entry, then click the Uninstall button that appears above the list of updates.

    It may take several minutes for the update to be uninstalled, so avoid canceling the process. Once complete, you will need to reboot your computer before the newer version of IE is completely removed and the most previous version of IE is automatically reinstalled.

    Preventing Future Updates

    After manually uninstalling an Internet Explorer version update, you will need to take further action to ensure that IE is not automatically updated in the future. Rather than disabling all automatic updates for Windows, you can install a toolkit developed by Microsoft to block the installation of new versions of IE.

    Important: Version updates do not need to be installed consecutively, so if you would like to maintain IE8 as your current version, you will need to install all three toolkits to block IE 9, 10, and 11. To keep IE9, you will need to install the toolkits for IE 10 and 11. Please also note that these toolkits will not prevent you from manually installing one of these versions IE in the future.

    Below you can find links for available toolkits; please select the correct toolkit(s) for the version(s) you would like to block:

    If you are attempting this on a departmental computer and are unable to install the above toolkits due to insufficient administrative rights, please contact your local department IT support to determine your best option.

    – Last updated on December 21, 2009 by VG

    If you are using Internet Explorer 8 (IE8), you might have noticed the “New Tab” page which shows a few handy links to open recently closed tabs, open InPrivate browsing window, etc:

    Sometimes the “New Tab” page is replaced by a Blank page. It might be due to some tweaking software or change in Internet Options.

    If you are facing the same problem and want to get the “New Tab” page back in IE8, please follow these simple instructions:

    1. Open Internet Explorer and go to “Tools -> Internet Options“. If you can’t see Menubar, you can access it by pressing “ALT” key.

    2. Now click on “Settings” button in “Tabs” section.

    3. Now select “The new tab page” option from the drop-down box given in “When a new tab is opened, open:” section.

    4. That’s it. Click on OK button and now you’ll get the default “New Tab” page back in IE8.

    You are here: Home » Internet Explorer » How to Restore Default “New Tab” Page in Internet Explorer 8?

    About the author: Vishal Gupta (also known as VG) has been awarded with Microsoft MVP (Most Valuable Professional) award. He holds Masters degree in Computer Applications (MCA). He has written several tech articles for popular newspapers and magazines and has also appeared in tech shows on various TV channels.


    NOTE: Older comments have been removed to reduce database overhead.

    Hi VG,
    I am not a big fan of IE, but I would like to know how to: how to automatically open a new tab when clicking on a site in bookmarks without first creating the new tab on the taskbar?

    ^^ There is no built-in option to do this but you can either middle-click on the bookmark or press “CTRL” key while clicking on the bookmark to open it in a new tab. Same applies to links present in a webpage.

    Thanks mate, that was helpful.

    i downloaded something which changed my default new tab page to “fun moods search”, so now even if I follow the instructions here, it still shows me this page. i want to restore my new tab page so that it goes to explorer’s new tab page, like it used to do before. how can i do this?

    Ok never mind. i just say president Kush’s comment about how to do this.

    Well done on settings change for me that was bringing up Blank Page

    Thank You , Thank You, Thank You…
    I did what you suggested and it worked Perfectly.
    U R the BEST .

    Thank you so much for this.
    It was extremely helpful.

    I can’t find the tool thing that looks like that.
    I need someone to physically help me with this.


    I have followed your instructions, step by step, over and over again, and have restarted my computer (about 10 times) after each try, but the “open in new tab” function has not been restored. Is there another way of restoring it?

    Please help! I’m starting to get frustrated.

    Hi I’m not sure why I can’t log on to the internet but I do have the “ New tab “ sign in the top left hand corner of the page , how do I get rid of this please ?

    The web moves at a breakneck pace. Websites get updates and redesigns all the time. In some cases, information gets lost in that process, whether that’s because a site has been taken down or simply due to improper storage.

    Online historical records enable you to see old versions of websites, captured at specific moments in time. Being able to do that is useful for more than just taking trips down memory lane, so let’s talk about internet archives!

    Why You’d Want to See Old Versions of Websites

    There are plenty of reasons you might want to see old versions of your favorite (or most used) websites. On many sites, a lot of things change over time, including:

    • Their overall design
    • The data you have access to
    • Specific pages that get deleted or updated

    Consider our own website, for example. It has been around since 2008, and as you might imagine, a lot of things have changed since its early days:

    Being able to peek into the past is incredibly helpful. You can find design inspiration in old websites, and get access to media files that are no longer available.

    More importantly, however, internet archives enable you to see information that has been lost to time. For example, if one of your favorite websites goes offline, you should be able to find a stored copy of it around the web:

    Having access to old versions of websites also enables you to circumvent censorship in some cases. If your Internet Service Provider (ISP) or government censors parts of the web, you might be able to get past those barriers and look at archived sites.

    Beyond the more practical reasons, it’s essential that we keep a record of the web as it was and is today. Internet archives fulfill a similar function to libraries, enabling us to peek into the past and see how things have changed over time.

    3 Tools You Can Use to See Old Versions of Websites

    There are a surprising number of services that store or cache old copies of websites. In most cases, they take ‘snapshots’ of specific sites and pages upon request. That means you can end up with an archive that saves thousands of copies of your website over time, depending on its popularity. Let’s check out some of these services and what they have to offer.

    1. Internet Archive’s Wayback Machine

    The Internet Archive is a nonprofit organization, which is dedicated to building a digital library of websites, books, audio recordings, videos, images, and even software. If you’re looking to kill a little time, the Internet Archive even hosts emulated versions of old games that you can play right from your browser:

    As far as websites go, the Internet Archive stores over 448 billion pages, and you can navigate them using its Wayback Machine tool:

    To get started, enter the URL of the website you want to check out. The Wayback Machine will show you a graph that tracks how often copies of that website were saved over the years. If you click on a specific year within that graph, you’ll be able to access individual copies of the site using a calendar:

    To give you an idea of how thorough an archive this is, the Wayback Machine has saved over 19,700 copies of the Elegant Themes website.

    Once you select what snapshot you want to see, the Wayback Machine will load that cached copy in a new tab:

    Keep in mind that loading times probably won’t be as fast as you’re used to. Once the page loads, however, you should be able to interact with it as usual. You can move from page to page, save images, read comments, etc.

    In some cases, though, you won’t be able to navigate within old cached copies of a website. That’s because some pages that are linked to might not be cached, which is common for sites with massive content libraries.

    2. is a service that enables you to load copies of old websites, while emulating old browsers to give you the full experience. If you never had the joy of using Netscape or ancient versions of Internet Explorer, can help you scratch that itch.

    This service pulls copies of the pages you want to see from third-party archives. Those include the Internet Archive and national libraries from around the world, making for a pretty comprehensive service.

    As you might expect, though, emulating old browsers and pulling data from several sources takes time. often requires you to wait in a virtual line before you can see what you want:

    Once the wait is over, the service will launch an emulated version of the browser you chose, displaying the website you wanted to see:

    As fun as it can be to browse old websites, the wait times mean that isn’t as great an option if you want to check out multiple versions of the same site. The wait can often go on for minutes, so that time adds up pretty quickly.

    3. Library of Congress

    The American Library of Congress houses the largest collection of books, recordings, newspapers, and websites in the world. Its website collection works differently than our previous two suggestions, though.

    If you try looking up a specific website using the library’s search feature, you’ll probably find a collection of haphazard results. Here’s what appears when we look up “reddit”, for example:

    When you open individual links, the library enables you to browse the pages it has in storage, using a system identical to the Wayback Machine:

    The library also saves descriptions and other useful information for every website in its archive, which makes it particularly useful for research:

    Likewise, you can browse the archive itself without running a search, as the library offers an in-depth category system that includes all of its entries:

    Although the library’s website archive isn’t as extensive as the Wayback Machine’s, it offers a lot more detail. The library also lets you browse around without a particular website in mind, which is something other archives don’t enable you to do.

    On another note, this library also houses a huge collection of images that you’re free to use, sometimes without attribution:

    Some of these sets are images from the web. That makes this site a valuable resource for stock graphics, if you ever grow bored of more traditional options.


    There are a lot of practical reasons you’d want to take a look at old versions of specific websites. Perhaps you’re hunting for content that’s no longer there and images you want to re-use, or maybe you’re just trying to bypass censorship.

    In any case, internet archives fulfill a great public service for all of us. Here are your three best options if you want to peek into the past of the web:

    1. Internet Archive’s Wayback Machine: Navigate the largest archive of cached pages on the web.
    2. Use emulated versions of old browsers to navigate websites from the past.
    3. Library of Congress: Browse the library using an in-depth category system, or take a look at specific websites.

    What’s your favorite old website that’s no longer around? Share your memories in the comments section below!

    Article thumbnail image by Leremy /

    By Will Morris

    Will Morris is a staff writer at WordCandy. When he’s not writing about WordPress, he likes to gig his stand-up comedy routine on the local circuit.

    Back at Build 2019, Microsoft announced IE Mode for Microsoft Edge users which allowed them to open websites in Internet Explorer. While it’s hard to imagine using Internet Explorer in 2019, there are still legacy websites which require Internet Explorer to run. The feature was aimed at Enterprise users who were using Internet Explorer separately to use legacy websites.

    If you’re someone who uses Internet Explorer then you can follow the steps below to enable IE Mode in Microsoft Edge and save yourself some trouble.

    • Head to edge://flags and look for “Enable IE Integration” flag. Now click on the drop-box and select IE Mode and relaunch the browser to save changes.
    • Now right-click on Edge shortcut and click on Properties. Now add:

    (without quote) to the end of Target field. The target field should now look something like:

  • Now click Apply and Ok. Click on continue if you’re prompted with a UAC asking for permission.
  • This should enable IE Mode on Edge. Once done, you will need to follow the steps below to visit websites in IE Mode. Make sure you are using the same shortcut which you just modified.

    • Open a new website in Microsoft Edge.
    • Now click on the three dots in the top right corner (…) and select More Tools>Open sites in Internet Explorer mode.

    This should enable IE Mode for all the websites in the active tab. You will, however, see a notification stating that you’re using an unsupported command-line flag. You can safely ignore it but it will show up on every launch.

    Some links in the article may not be viewable as you are using an AdBlocker. Please add us to your whitelist to enable the website to function properly.

    Hey, Scripting Guy! How can I configure Internet Explorer 7 so it uses multiple home pages?

    Hey, PI. Just a second; before we begin, is anyone from Microsoft reading today’s column? Don’t be shy; raise your hand if you’re from Microsoft. No one, not a single Microsoft employee is reading today’s column? Excellent.

    What difference does it make if someone from Microsoft reads today’s column? Well, all things considered, the Scripting Guy who writes this column would just as soon that no one he works with knows the horrible truth: the Scripting Guy who writes this column doesn’t actually use Internet Explorer 7. That’s right; he still uses Internet Explorer 6. Why? No real reason; he just likes Internet Explorer 6 better.

    Like we said, though, that’s just between us. (Although it could be worse; he could be using Firefox or some other non-Microsoft browser.)

    Anyway, because he still uses Internet Explorer 6 (and drives a Model T, and listens to music on a gramophone, and …) the Scripting Guy who writes this column didn’t even know that you could configure Internet Explorer 7 to use multiple home pages. As it turns out, however, you can. Which actually makes sense: multiple tabs means that you can open up multiples pages at once. So why not multiple home pages, pages that automatically load up, each on a separate tab, every time you start Internet Explorer?

    And the best part of all? Writing a script to assign multiple home pages to Internet Explorer 7 is as easy as, well, as easy as this:

    As you can probably tell from glancing at the code, in order to configure multiple home pages for Internet Explorer 7 we need to modify the registry; in particular, we need to modify the following two registry values:

    HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main\Start Page . This is the spot where we configure the primary home page, the one that shows up in the topmost tab in Internet Explorer. If this registry location sounds familiar to you, it should: this is the same registry value used to configure the home page in previous versions of Internet Explorer.

    HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main\Secondary Start Pages . This is a brand-new registry value, and just happens to be the spot where we configure the rest of our home pages. (Or, as Internet Explorer 7 terms them, “secondary home pages.”)This registry value doesn’t exist by default; if it did, then you’d already have multiple home pages. But don’t worry; creating this new registry value is nowhere near as difficult as you might think it would be. (Well, unless, of course, you don’t think it would be difficult at all.)

    OK, so much for what we’re going to do; let’s talk about how we’re going to do it. To begin with, we define a constant named HKEY_CURRENT_USER and assign it the value &H80000001; we’ll use this constant to tell the script which registry hive we want to work with. (You’re right: we do want to work with the HKEY_CURRENT_USER hive.That’s because the Internet Explorer home page is configured on a per-user basis.) We then connect to the WMI service on the local computer, taking care to bind to the StdRegProv class which, unlike most of the WMI classes we work with, is found in the root\default namespace:

    Note . Could we run this same script against a remote computer? Of course we can; what fun would it be if we couldn’t ? To configure multiple home pages on a remote computer, just assign the name of that computer to the variable strComputer, like so:

    After we connect to the WMI service, our next task is to assign values to three variables:

    strKeyPath . This is the path (within the HKEY_CURRENT_USER hive) to the registry value we want to modify. In this case, that’s SOFTWARE\Microsoft\Internet Explorer\Main .

    ValueName . The name of the registry value to be modified. For this script, that’s Start Page .

    strValue . The value to be assigned as the primary home page. Needless to say, we opted for the page that all kind and decent people use as their home page: .

    So then how do we actually make the Script Center home page the Internet Explorer home page? Like this:

    As you can see, all we’re doing here is calling the SetStringValue method, passing the registry hive (the constant HKEY_CURRENT_USER), the registry path (strKeyPath), the registry value name (ValueName), and our new home page (strValue) as the method parameters.

    Well, that was easy, wasn’t it? Now let’s see what we can do about those secondary home pages.

    As we noted earlier, the URLs for secondary home pages (all of them) are stored in a registry value named Secondary Start Pages. That means the first thing we need to do is change the value of the variable ValueName:

    Note . How come we don’t change the value of the variable strKeyPath? There’s a very good reason for that: we don’t need to. That’s because Secondary Start Pages also resides in the registry key SOFTWARE\Microsoft\Internet Explorer\Main.

    At this point, things get a tiny bit tricky. (But just a tiny bit.) The Secondary Start Pages registry value needs to have the data type REG_MULTI_SZ; that’s because this key (if needed) has to be able to hold multiple values. Fortunately, that’s no big deal; that simply means that any value we assign to this registry key must be passed as an array. That explains what this block of code is for:

    In our first line of code, we’re assigning the URL for the Hey, Scripting Guy! column to a variable named strValue1. Why? Because we want Hey, Scripting Guy! to be one of our secondary home pages. In line 2, we assign the URL for the Sesame Script column to a variable named strValue2. Why? Because – oh, right. Guess you didn’t need our help to figure that out, did you?

    Note . Can you create more than 2 secondary home pages? Yes you can, although, to be honest, we’re not sure what the limit is, or even if there is a limit.

    That brings us to line 3, where we call VBScript’s Array function and add our two variables (strValue1 and strValue2) to an array named arrValues.

    After we’ve done that we’re ready to call the SetMultiStringValue method and assign these two URLs to the registry value Secondary Start Pages. That’s what we do here:

    What’s that? Didn’t we say that, by default, the registry value Secondary Start Pages doesn’t exist? Yes, we did say that. But, as we also said, that’s no big deal. If this registry value exists then SetMultiStringValue will simply overwrite it; if the registry value doesn’t exit then SetMultiStringValue will first create it, and then assign it a new value. Talk about a win-win situation, huh?

    At any rate, that should do it, PI. We’re sure that today’s column has generated even more questions about working with Internet Explorer 7; for example, no doubt some of you are wondering how to delete these secondary start pages, or maybe how to delete one of the secondary start pages (while leaving the other alone). We’ll address some of these questions in the very near future, albeit not today. But that’s all right; after all, you need some time to play around with the script that assigns multiple home pages. And the Scripting Guy who writes this column needs some time to actually install and start using Internet Explorer 7.

    Although, if anyone asks, he’s been using it all along.