Categories
Interior

How to pair and configure your apple pencil (2nd generation)

More often than not, the Apple Pencil or Apple Pencil 2 just works. But if you’re having an issue with Apple’s stylus not responding in apps, disappearing from Notification Center’s battery menu, or refusing to turn on, we’ve got some simple tips to help you troubleshoot it back to health.

Fix your Apple Pencil:

  • Tighten the nib
  • Recharge
  • Reboot
  • Re-pair
  • Contact Apple

Tighten the nib

The Apple Pencil’s nib comes off. That’s because it can wear down over time, and you’ll need to swap in the replacement that comes in the box. It also means it can come loose and you’ll need to tighten it to get it working again. It doesn’t take much effort, and you should never apply too much pressure. Just make sure it’s on and tightened properly.

If that worked, you’re back to work. If not, keep on reading on!

Recharge

Next, we need to make sure your Apple Pencil’s battery is charged. It’s the silliest thing, but it happens. Pull down Notification Center and look for your Apple Pencil under Batteries.

If you’ve entirely run out of battery or haven’t used your Pencil recently, it may take up to ten minutes for your stylus to properly charge and appear in Notification Center. Don’t panic if you don’t see it immediately; just give your Apple Pencil time to charge up.

If you’ve charged your Apple Pencil for more than 20 minutes and still don’t see it appear in Notification Center, keep reading.

Reboot

Sometimes, it’s not the Apple Pencil’s fault at all, but the iPad Pro’s, and a good old-fashioned reboot can help get both up and running again. You can either turn your iPad Pro on and off as normal, or perform a hard reset if you think you need it. Either way, it should get things working again if the problem is relatively minor.

If not, let’s keep going.

Re-pair

If you find your Apple Pencil not working, it could be time to check your Bluetooth settings to make sure the Pencil’s connected — and if not, to reconnect it. Alternatively, you can unpair your Apple Pencil and then re-pair it to your iPad, sometimes that helps shake off a weird connection and fixes issues.

If you’ve re-paired your Pencil and it still doesn’t work, it may be time to contact the pros.

Contact Apple

If you think you got a defective Pencil or something’s happened to make it defective, you can take it to an Apple Retail Store for further troubleshooting or an outright exchange. If you don’t live near an Apple Retail Store, you can also call AppleCare at 1-800-MY-APPLE for a mail-in repair or replacement, or visit Apple’s support website.

Updated December 2021: Updated with the best tips for troubleshooting Apple Pencil.

Oliver Haslam is a professional freelance writer with nearly ten years of experience. His work has been published on Macworld, PCMag, 1Password’s blog, and other websites. He writes about all things Apple. Read more.

When Apple refreshed the iPad Pro in November 2018, it also brought a new Apple Pencil along with it. The Apple Pencil (2nd Generation) has plenty to differentiate it from the previous model, and here we’ll show you how to pair and configure your new accessory.

The 2018 iPad Pro is a huge departure from any previous models, and the same can be said of the Apple Pencil (2nd generation—simply referred to as the Apple Pencil from here on out) too. Gone is the Lightning connector that meant many uncomfortable charging situations, and in comes an inductive charging process. Almost everything is new here, including how you pair the device. There’s plenty to get through, so let’s get started.

Pairing the Apple Pencil

Pairing an Apple Pencil is so intuitive that you might do it by mistake. To pair an Apple Pencil, attach it to the side of your 2018 iPad Pro. A picture of the Apple Pencil will appear on-screen, along with a prompt to complete the pairing process. Tap the “Connect” button to pair your Apple Pencil.

Changing the Double-Tap Behavior of the Apple Pencil

One of the best new features of the refreshed Apple Pencil is the ability to double-tap the side of it and have the currently selected tool change. You can switch between a few tools, and app developers have the option of overriding the system default and creating their own shortcuts, too. There are four options for the system default.

  • Switch Between Current Tool and Eraser
  • Switch Between Current Tool and Last Used
  • Show Color Palette
  • Off

To make any changes open the Settings app and tap the “Apple Pencil” section.

The resulting screen shows the Apple Pencil’s current battery level (if connected) as well as an option to browse regulatory information for the accessory. Right between those two things you will notice the four options outlined above. Tap an option to activate it.

Once you’ve made your selection, you can invoke it by double-tapping the side of the Apple Pencil.

When Apple updated the iPad Pro in November 2018, it also brought a new Apple Pencil with it. The Apple Pencil (2nd generation) has a lot to differentiate it from the previous model, and here we will show you how to pair and configure your new accessory.

The 2018 iPad Pro is a huge departure from anything that came before it, and the same can be said for the Apple Pencil (2nd generation, simply referred to as Apple Pencil from here on out) as well. Gone is the Lightning connector that meant a lot of awkward charging situations, and an inductive charging process is coming. Almost everything is new here, including the way the device pairs. There’s a lot to overcome, so let’s get started.

Apple Pencil pairing

Pairing an Apple Pencil is so intuitive that you could do it by mistake. To pair an Apple Pencil, plug it into the side of your 2018 iPad Pro. An image of the Apple Pencil will appear on the screen, along with a message to complete the pairing process. Tap the “Connect” button to pair your Apple Pencil.

Change Apple Pencil double-tap behavior

One of the best new features in the updated Apple Pencil is the ability to double-tap the side and have it change the currently selected tool. You can switch between some tools and app developers have the option to override the system default and create their own shortcuts as well. There are four options for the system default.

  • Switch between current and eraser tool
  • Switch between current and last used tool
  • show color palette
  • Off

To make changes, open the Settings app and tap on the “Apple Pencil” section.

The resulting screen shows the current battery level of the Apple Pencil (if connected), as well as an option to look up regulatory information for the accessory. Right in between those two things, you’ll notice the four options outlined above. Touch an option to activate it.

Once you’ve made your selection, you can summon it by double-tapping the side of the Apple Pencil.

Khamosh Pathak is a freelance technology writer who specializes in tutorials. His work has also been published on Lifehacker, iPhoneHacks, Zapier’s blog, MakeUseOf, and Guiding Tech. Khamosh has nearly a decade of experience writing how-tos, features and technology guides on the internet. Read more.

Apple offers two different generations of Apple Pencil, which are compatible with different iPads. As both are battery powered, they are inevitably going to run out of juice. Here’s how to charge and check the battery percentage of your Apple Pencil.

How to Charge First-Generation Apple Pencil

Charging the first-generation Apple Pencil is not the most elegant affair. The first-generation Apple Pencil is compatible with all iPads that ship with a physical Home button and a Lightning port.

If you need help identifying which Apple Pencil you own, know that the first-generation accessory is completely circular.

It’s paired and charged in the same fashion. Take your Apple Pencil and remove the cap from the top of the stylus. You’ll now see a Lighting connector at the end of the Apple Pencil.

Insert this connector into the Lightning port at the bottom of your iPad. You’ll hear a ding and the Apple Pencil will start charging.

Keep the Apple Pencil plugged in; a full charge happens in around 15 to 30 minutes. We will guide you through how to see the battery percentage of an Apple Pencil at the end of the article.

If you don’t like charging your Apple Pencil using your iPad (and it is quite an awkward affair), you can use the Lightning adapter that came in the box with your Apple Pencil.

Connect your Apple Pencil to the adapter, then connect the adapter to a Lightning cable to charge your stylus.

How to Charge Second-Generation Apple Pencil

Apple improved the charging experience with the second-generation Pencil by leaps and bounds. The second-gen Apple Pencil is supported by newer iPad Pros and iPad Air. These iPads have flat edges and don’t have physical Home buttons.

The second-generation Apple Pencil magnetically snaps to the side of the iPad, as it has a single flat edge (along with a programmable button). And that’s all you have to do to pair and charge your Apple Pencil.

Put your Apple Pencil on top of your iPad (when in landscape), and you’ll see a banner telling you that the accessory is charging. You’ll see the battery percentage as well.

As this is the way to store and carry around your Pencil with your iPad, your Apple Pencil will almost never be without charge.

If this does happen, attaching it to the iPad will give you the required charge in just a couple of minutes. You’ll also get a notification when your Apple Pencil is running low on battery.

How to See Your Apple Pencil Battery Percentage

When you use a Pencil with your iPad, Apple automatically adds a Batteries widget to the Today View screen. You can swipe left to right on your iPad’s Home screen to bring up “Today View.” Here, swipe up to find the “Batteries” widget.

You’ll see the battery levels of a connected Apple Pencil right here.

If you can’t find the Batteries widget, you can add the widget in just a couple of seconds. Tap and hold an empty part of your Home screen to enter Jiggle Mode.

Here, tap the “+” button in the top-left corner of the screen.

From the widgets pop-up menu, choose the “Batteries” option.

You’ll see the widget in three sizes. Use the Small or Large size if you want to see the battery percentage and then tap the “Add Widget” button.

The widget will be added to the end of the Today View. You can move it wherever you want on that screen. Swipe up from the Home bar to save the widget layout.

You can now see the battery percentage of your Apple Pencil at any time, no matter if it’s charging or not.

One of the best things you can do with the Apple Pencil is to use it to take handwritten notes in the Notes app. Say goodbye to pen and paper, once and for all!

Do you know how to pair your Apple Pencil with your iPad tablet? Do you know what to do if your Apple Pencil is not working or you can’t pair it with your iPad? If you are bothered by these questions, you can read this MiniTool post to get some useful solutions.

Apple Pencil is a line of wireless stylus pen accessories that supports iPad tablets. Before you use it, you need to pair it to your iPad. Now, we will show you how to pair Apple Pencil.

How to Pair Apple Pencil?

Preparations

1. You need to make sure that your Apple Pencil can work with your iPad. If you don’t know it, you can refer to these two lists:

If you are using an Apple Pencil (2nd generation), it can work with these iPad models:

  • iPad Air (4th generation)
  • iPad Pro 12.9-inch (3rd generation) and later
  • iPad Pro 11-inch (1st generation) and later

If you are using an Apple Pencil (1st generation), it can work with these iPad models:

  • iPad (8th generation)
  • iPad mini (5th generation)
  • iPad (7th generation)
  • iPad (6th generation)
  • iPad Air (3rd generation)
  • iPad Pro 12.9-inch (1st or 2nd generation)
  • iPad Pro 10.5-inch
  • iPad Pro 9.7-inch

2. You need to make sure that your Apple Pencil has enough power. Otherwise, you need to charge it.

Pair Your Apple Pencil (2nd generation) with Your iPad

You just need to attach your Apple Pencil to the magnetic connector on the side of your iPad. There will be a pop-out interface on your iPad screen. You need to tap the Connect button to finish the job.

Pair Your Apple Pencil (1st generation) with Your iPad

You need to remove the cap from your Apple Pencil and then plug your Apple Pencil into the Lightning connector on your iPad. Then, tap the Pair button on the screen to pair it with your device.

However, when pairing or using your Apple Pencil, you may encounter different kinds of issues like Apple Pencil not pairing or Apple Pencil not working. If you are bothered by one of these issues, do you know how to fix it? Keep reading and you can get the answers you want to know.

If Your Apple Pencil Not Pairing

If you can’t pair your Apple Pencil with your iPad, you can do the following things to fix it:

  1. Restart your iPad.
  2. Go to Settings > Bluetooth to check whether Bluetooth is turned on. If no, you need to enable it.
  3. Stay on the Bluetooth screen and then check your Apple Pencil under My Device. Tap the Info icon (a blue circle with a blue i in it) if you can see it and then tap Forget this Device.
  4. Plug your Apple Pencil into the Lightning connector on your iPad and tap the Pair button a few seconds later.
  5. If you can’t see the Pair button, you can charge your Apple Pencil for a while and then try to pair it with your iPad again. Then, you can check whether you can see the Pair
  6. If you still can’t see the Pair button, you can contact Apple support for help.

If Your Apple Pencil Not Working

If your Apple Pencil stopped working, you can do these things to fix it:

  1. Perhaps, your Apple Pencil runs out of power, you can charge it and then try again.
  2. Check the nib of your Apple Pencil. If the nib is loose, it will not work of course. So, you need to tighten it.
  3. Reboot your iPad to fix some temporary issues.
  4. Re-pair your Apple Pencil with your iPad to see whether it can work normally again.

These are the solutions to Apple Pencil not pairing or Apple Pencil not working. We hope these solutions can help you solve the issue you are facing. Should you have any related issues, you can let us know in the comment.

If your FaceTime camera not working on your Mac computer, do you know how to fix it? If no, you can read this post to get some useful solutions.

The Apple Pencil is one of the best styluses you can get for your iPad. No matter which version you have, the Pencil is easy to store and use.

However, since it’s all wireless, it’s not immediately obvious what you’ll need to do to connect the Apple Pencil with your iPad.

Fortunately, pairing only takes a moment. Here’s how to connect any Apple Pencil with your iPad.

Important: Apple Pencils will only pair with compatible iPads. If you’re wondering which Pencil you can pair with the iPad you own, check out our full iPad Apple Pencil guide.

How to connect an Apple Pencil to your iPad

All you need to do to connect your Apple Pencil to an iPad is charge the Apple Pencil with that iPad.

If you have a first-generation Apple Pencil, unscrew the cap on the back of the Pencil and plug it into your iPad’s charging port. Unlock your iPad, and tap the Pair button that appears.

If you have a second-generation Apple Pencil, latch the Pencil onto the magnetic connector on your iPad’s side. If it asks you if you want to pair it, tap Pair.

Your Apple Pencil will stay paired until you restart the iPad, turn on Airplane Mode , or connect it to another iPad.

Quick tip: If your Apple Pencil won’t pair, make sure that it’s charged and that Bluetooth is enabled on your iPad. If it still won’t pair, restart your iPad.

We may receive a commission when you buy through our links, but our reporting and recommendations are always independent and objective.

When your pencil acts up, the fix is often easy to handle

  • Saint Mary-of-the-Woods College
  • Tweet
  • Share
  • Email
  • Tweet
  • Share
  • Email

In This Article

Jump to a Section

There are several possible causes behind your Apple Pencil not working as expected; most have fairly easy fixes. Troubleshooting tips for Apple Pencil are mostly the same for both generations of the accessory.

Information in this article applies to the Apple Pencil (2nd generation) and Apple Pencil (1st generation) on a compatible iPad.

Check the Battery

The battery in your Apple Pencil has to be charged for the pencil to work.

To check the battery status on your iPad and verify whether your Pencil is charged, do the following:

Check the Widgets view on your iPad for the battery status. You can find widgets in the Today View. To get there, swipe right on the Home screen, the Lock screen, or while you’re looking at your Notifications.

Look in the Batteries widget. If you don’t see your the widget, make sure you have your Pencil set up with Bluetooth and Batteries is chosen to appear in Today’s View.

You can also check the battery status by selecting Settings > Apple Pencil and looking for the charge at the top of the main screen.

If the battery shows 0%, you need to charge the pencil.

  • Charge the Apple Pencil (2nd generation) by attaching it magnetically to the side of your iPad. Bluetooth must be turned on for the Apple Pencil 2 to charge.
  • Charge the Apple Pencil (1st generation) by plugging it into the lightning connector on your iPad or by using the USB power adapter that came with the Apple Pencil.

The Apple Pencil charges quickly, so if the battery was dead, charging it should get you up and running quickly.

Confirm Pencil Compatibility With iPad

Apple Pencil 1st and 2nd generations run with different models of iPads, so if you’re trying to use your new 2nd generation Apple Pencil with an iPad you previously used with a 1st generation Apple Pencil, it’s not going to work.

Apple Pencil (1st generation) Compatible iPads

  • iPad (6th and 7th generation)
  • iPad Pro 9.7-inch
  • iPad Pro 10.5-inch
  • iPad Pro 12.9-inch (1st or 2nd generations)
  • iPad mini (5th generation)
  • iPad Air (3rd generation)

Apple Pencil (2nd generation) Compatible iPads

  • iPad Pro 12.9-inch (3rd and 4th generation)
  • iPad Pro 11-inch

Confirm Bluetooth Is Turned On

The Apple Pencil requires a Bluetooth connection with your iPad to work. If your Apple Pencil doesn’t show up in the list of devices under the Battery widget, or there isn’t a Battery widget at all, it’s most likely that Bluetooth is turned off or needs to be reset. To check, do the following:

On your iPad, tap Settings.

Tap Bluetooth. Tap the toggle switch to turn on Bluetooth if it isn’t turned on. You should see your Apple Penci in the My Devices section if it is paired with the iPad.

If Bluetooth won’t turn on or you see the spinning/loading icon, restart your iPad and try again.

This is also a great way to troubleshoot Bluetooth malfunctioning issues.

Bluetooth and Pencil Not Paired

If your Apple Pencil’s not pairing with your iPad or the iPad has lost the pairing, re-doing the Bluetooth pairing process could resolve your Apple Pencil problem.

Ensure the iPad is on, unlocked, and Bluetooth is enabled by going to Settings > Bluetooth. Even if you see your Apple Pencil listed, if it isn’t working, you may need to re-pair it.

Tap the information icon (the i in a circle) next to Apple Pencil in the Bluetooth settings screen.

Tap Forget This Device in the screen that opens.

Confirm that you want the iPad to forget the pencil in the pop-up window by tapping Forget Device.

Position your Apple Pencil (2nd generation) along the side of your iPad magnetically. For Apple Pencil (1st generation), uncap the Apple Pencil and plug it into the lightning port of the iPad.

A Bluetooth Pairing Request dialog may appear, in which case select Pair, or the pairing may occur automatically if the pencil has been paired before. The repaired Apple Pencil is visible in the Settings > Bluetooth screen.

Pencil Tip Is Worn

If your Apple Pencil behaves erratically or not at all, the Pencil tip could be worn out. Replacing the tip is simple.

Although there isn’t a recommended length of time the Pencil tip should last, many owners replace them when the feel, finish, or functionality starts to diminish. If the finish or feel is rough or like sandpaper, you should replace the Pencil tip to prevent it from scratching the surface of the iPad.

To replace, unscrew the pencil tip in a counterclockwise direction until it comes off, and then install the new tip by screwing the tip clockwise until it feels secure in your Apple Pencil.

If you don’t screw the tip all the way in, the Apple Pencil won’t work correctly or at all.

App Doesn’t Support Apple Pencil

Not all apps support the Pencil. To verify your Apple Pencil is working, open a known supported app, such as Notes. The Notes app is a reliable and excellent choice to test your Pencil, and it should be on your home screen. If you don’t have it, download it.

Time to Contact Apple

If you’ve tried all these troubleshooting steps and you are still having problems, it is time to contact Apple. The Apple Pencil comes with a one-year limited warranty. If your pencil is no longer covered by the warranty, the cost for battery service is $29, according to Apple. You can either make an Apple Genius Bar appointment or call 1-800-MY-APPLE. You can also visit the Apple support website for a mail-in repair or replacement.

To set up an Apple Pencil second generation, Bring the pencil to the right side of the iPad so it magnetically attaches to the side. Once attached, it’s paired, set up, and ready. For first-gen Apple Pencils, plug the pencil into the port on your iPad to set it up.

There’s no Apple Pencil on-off switch. It stays connected to your iPad via Bluetooth and is ready to go when paired. Apple Pencils will go into Sleep Mode when Bluetooth is off but will “wake up” when nudged even slightly.

Apple Pencils don’t work with iPhones due to hardware and display incompatibility. Apple Pencils work only with compatible iPads.

Khamosh Pathak is a freelance technology writer who specializes in tutorials. His work has also been published on Lifehacker, iPhoneHacks, Zapier’s blog, MakeUseOf, and Guiding Tech. Khamosh has nearly a decade of experience writing how-tos, features and technology guides on the internet. Read more.

The second-generation Apple Pencil magnetically snaps to the latest iPad Pro. But you might have missed a hidden button at the flat side of your Apple Pencil. Here’s how to customize the double-tap action on your Apple Pencil.

The action button on the Apple Pencil is so hidden, it’s quite possible to entirely miss it or to discover it accidentally. Hold your Apple Pencil so that your index finger rests naturally on the flat side.

Now just double-tap the flat side of the Apple Pencil. The entire bottom third of the Apple Pencil serves as an action button, so you won’t have to adjust your grip to use the feature.

By default, double-tapping the action button will switch between the current tool and the eraser. But it’s possible to change the shortcut to switch to the last used tool or show the color palette.

Some pro apps even have options that will let you override the defaults for the specific app (more on that later).

How to Change Double-Tap Action for Apple Pencil for iPad Pro

To change the double-tap action, open the “Settings” app on your iPad Pro. If you can’t find it on your device’s home screen, use Apple’s built-in Spotlight Search feature.

As long as your Apple Pencil is paired and connected to your iPad Pro, you’ll see an “Apple Pencil” section in the sidebar of the Settings app. Tap it.

Now, you’ll see a “Double-Tap” section. From here, switch to either the “Switch Between Current Tool and Last Used” option or the “Show Color Palette” option.

If you find the double-tap action button too annoying, or if it gets in the way of your writing or drawing, you can turn it off by tapping the “Off” button.

For frequent Apple Pencil users, it’s worth switching to the last used double-tap action. When you’re using an app for highlighting or drawing, you’re usually switching between two tools.

Once this feature is enabled, open one of your frequently used Apple Pencil apps and then select one of your frequently used tools (like the pen tool).

Next, select another tool you use often (like the fill color tool). You can now just double-tap the action button to switch between the two tools, without ever touching the iPad’s screen!

Explore the Double-Tap Option in Pro Apps

Apple has opened up the double-tap action feature to third-party developers. Some apps will directly use your preference from the Settings app. So once you switch to the last-used option, it will carry on in third-party apps as well.

For example, PDF Expert 7 supports the double-tap actions and will throw a helpful dialog box when you first use the feature.

On the other hand, some apps let you associate specialized features to the double-tap actions that only work in the given app.

For instance, LiquidText lets you turn the double-tap action into an Undo button, which can be really handy when you’re annotating and taking notes in the app.

The way that Apple has implemented this hidden feature means it’s not quite coherent. You should spend some time exploring the settings in the apps where you use Apple Pencil. You might find a really useful or time-saving shortcut for the double-tap action.

Now that you’ve learned how to make your Apple Pencil more useful, you can kick things up a notch using Sidecar. Sidecar is a new feature in macOS Catalina and iPadOS 13 that lets you connect your iPad Pro to your Mac.

Once connected, you can view your Mac’s screen on your iPad Pro, and you can use your Apple Pencil to draw directly in Mac apps.

Is your Apple Pencil not pairing with your iPad or is it getting randomly disconnected while in use? This could be due to a number of different factors since it relies on a wireless connection and packs its own battery. Don’t fret though, since most disconnection and pairing issues with Apple Pencil can be fixed within a matter of minutes unless the hardware isn’t compatible.

Apple Pencil is an optional iPad accessory that’s used by millions of iPad users to draw, write, take quick notes, sketch, and more. For the most part, it works seamlessly with the iPads just like how almost all Apple accessories work with devices within the ecosystem. However, due to its wireless connectivity, internal battery, rare quirks, and certain hardware limitations, users can sometimes end up in a situation where they’re unable to pair the Apple Pencil with their iPads, or the Apple Pencil connection drops randomly making it almost unusable.

Regardless of the kind of issue that you’re specifically facing with your Apple Pencil, we’re here to help you get it fixed. In this article, we’ll cover how you can troubleshoot and resolve Apple Pencil’s pairing and disconnection problems.

Troubleshooting Apple Pencil Connectivity Issues

Apple Pencil’s connection drops could be related to Bluetooth, pairing issues, or because it ran out of battery.

Pairing issues are also usually Bluetooth-related, but they can also be due to incompatibility.

Whatever the cause, follow these troubleshooting methods to get your Apple Pencil to work properly with your iPad again.

Check Apple Pencil Compatibility

If you’re unable to pair your Apple Pencil with your iPad at all, compatibility is the first thing you need to check.

Apple has two different Apple Pencil variants, namely first-generation and second-generation Apple Pencils. Both of them support different iPad models. Therefore, you need to check if the Apple Pencil that you purchased is supported by the iPad you use.

Apple Pencil (2nd Generation)

  • iPad Air (4th generation)
  • iPad Pro 12.9-inch (3rd generation) and later
  • iPad Pro 11-inch (1st generation) and later

Apple Pencil (1st Generation)

  • iPad (8th generation)
  • iPad mini (5th generation)
  • iPad (7th generation)
  • iPad (6th generation)
  • iPad Air (3rd generation)
  • iPad Pro 12.9-inch (1st or 2nd generation)
  • iPad Pro 10.5-inch
  • iPad Pro 9.7-inch

How can I tell which Apple Pencil model I have?

If you’re unsure which Apple Pencil you have, the fully cylindrical Apple Pencil with the removable cap and Lightning port is the first-generation variant, whereas the Apple Pencil with a flat edge is the second-generation variant. Here’s a picture representing both the Apple Pencil models.

Check that Bluetooth is Enabled

Some users may find that Bluetooth was accidentally turned off, in which case the Apple Pencil will not be recognized.

Confirm that Bluetooth is enabled by swiping down into Control Center (from the top right corner of modern iPadOS), or going into the Settings app and making sure Bluetooth is turned on.

Re-Pair Your Apple Pencil

Are you frequently facing disconnections while using your Apple Pencil? In that case, this particular step is for you, and often re-pairing the Pencil will resolve disconnection issues right away. Bluetooth is typically the primary culprit for these random disconnections, but this can be easily fixed by unpairing and pairing your Apple Pencil again. It’s similar to how you’d re-pair your Bluetooth headphones when it randomly disconnects.

To do this, head over to Settings -> Bluetooth on your iPad and tap on the “i” icon next to the connected Apple Pencil. Next, scroll down to the bottom and tap on “Forget This Device”.

Charge Your Apple Pencil

One of the most common reasons why your Apple Pencil gets disconnected during usage is simply because it ran out of battery. Therefore, this is the first thing that you may want to check when it happens.

A lot of people who’re new to using an Apple Pencil with their iPads don’t really know that it runs on battery. If you’re using the first-generation Apple Pencil, you can take the cap off and plug the Lightning connector into the charging port of your iPad. On the other hand, you can charge a second-generation Apple Pencil by simply attaching it to the side of the iPad with volume buttons. It should snap on with the help of magnets and charge wirelessly.

Once you’ve charged it enough, try using your Apple Pencil again.

You can always check battery of Apple Pencil and other connected devices from the Battery widget.

Tighten or Replace the Tip / Nib

This step isn’t exactly for disconnections or pairing issues but can be used if your Apple Pencil isn’t detecting your writing or sketches properly. This is likely due to the fact that the Apple Pencil’s pointer tip / nib is either loose or has worn out over time due to prolonged use. If tightening the nib doesn’t fix it, you’ll need to replace it with a new one. Thankfully, Apple provides a replacement nib in the box when you purchase a new Apple Pencil for first gen, but 2nd gen owners will need to buy one (you can get packs of Apple Pencil tips on Amazon, from the Apple Store, and other online retailers). So, try a new tip / nib and see if you’re able to draw properly again.

Reboot Your iPad

If the above troubleshooting steps weren’t helpful in your case, chances are, it’s just a minor software glitch that can be easily fixed by turning your iPad off and back on again.

Simply press and hold the power/side button along with one of the volume buttons on your iPad to access the shutdown screen. On older iPads with the Home button, you just need to hold the power button to get to the shutdown menu.

Apart from a regular restart, you can also take things up a notch and try force restarting your iPad. This is different from a normal reboot and requires a combination of button presses.

On iPad models with a physical Home button, force restart can be initiated by pressing and holding the power button and Home button until the Apple logo shows up. On newer models with Face ID, it’s slightly more complicated since you’ll have to press multiple buttons in quick succession. Click the volume up button first, followed by the volume down button, and then hold the side/power button until the Apple logo shows up to properly force reboot the iPad. Once you’re back on the Home screen, check if your Apple Pencil is working again without any issues.

Apple Pencil still having problems?

Unlucky enough to still face issues with Apple Pencil? It’s possible the Pencil itself is faulty, particularly if it’s brand new, or that there is some other issue at play. At this point, you might want to contact official Apple Support to see what they suggest. They will be able to help you if the hardware is at fault, and offer a free repair or replacement if your Apple Pencil is still in warranty.

Hopefully, you were able to fix your Apple Pencil connectivity issues using the tips above, and without requiring any further assistance from Apple Support. Which of the troubleshooting methods that we covered here worked for you? Do you have any additional tips that can fix these disconnection and pairing problems? Feel free to drop your ideas and share your experiences with Apple Pencil in the comments section down below.

Apple introduced the second generation Apple Pencil at the end of October at the media event where the 2018 iPad Pro was unveiled. Read on to learn all about Apple’s newest stylus.

The new iPad Pro marks a significant change in Apple’s tablet design. This is the first model without a Home button, so there’s more that’s done with gestures, just like the iPhone XS and iPhone XR. It’s also the first iPad to drop the Lighting port in favor of USB-C.

Which iPads Can Use the Second Generation Apple Pencil

Apple Pencil 2 is compatible with the 12.9-inch and 11-inch iPad Pro models Apple introduced in October 2018. If you have a first or second generation iPad Pro you’ll use the original Apple Pencil

How Does the Second Generation Apple Pencil Pair with iPad Pro

The original Apple Pencil paired when you plugged it into the Lighting port on your iPad Pro. Not so with the second generation version. The new Apple Pencil automatically pairs with your 2018 iPad Pro, no need to plug in anything.

How does the Second Generation Apple Pencil Charge

The new Apple Pencil uses inductive charging, much like Apple Watch, to charge. Just set your Apple Pencil on the side of your 2018 iPad Pro and it’ll snap in place thanks to magnets in the tablet body. That starts the charging process and gives you a convenient place to keep your Apple Pencil, too.

Apple Pencil 2 magnetically attaches to the side of the iPad Pro to charge

How Can I Tell the Difference Between the First and Second Generation Apple Pencil

The original Apple Pencil has a cap on the end covering its Lighting connector. That connector plugs into previous generation iPad Pro Lighting ports to charge and pair.

Apple Pencil 2 has a flat side, and no charging port cap on the end

The second generation Apple Pencil doesn’t have a cap, and has a flat side instead of a completely round shaft. That flat side snaps in place on the edge of your iPad Pro.

Does the Second Generation Apple Pencil Include More Features than the Original

Apple Pencil 2 supports pressure sensitivity and senses the stylus angle, just like the original. It also has a touch sensitive area where you hold the stylus when writing or drawing. Just tap the side of the stylus with your finger.

Tap controls can be set by apps and user preferences. You can switch brushes in your drawing app, for example, with a quick finger tap instead of tapping on menus.

How Much Does the Second Generation Apple Pencil 2 Cost

Apple Pencil 2 is priced at US$129. That’s $30 more than the original model. The higher price is most likely related to the wireless charging feature.

The Apple Pencil is one of the best tools any iPad Pro user can have — especially artists — and it’s finally getting an upgrade! Apple announced the second-generation Apple Pencil at its October press event in New York; here’s everything you need know!

What’s different about the new Apple Pencil?

In a quick blurb, the Apple Pencil (2nd-gen) has a slightly new design, charges wirelessly, and has some new functionality! Oh, and it’s currently only available for the iPad Pro (2018).

How does the Apple Pencil (2nd-gen) charge?

It charges wirelessly by magnetically connecting to the side of the new iPad Pro, meaning your Apple Pencil no longer has a lightning connector on the end and you don’t have to plug it into your iPad to charge it up! Plus, since it connects to the side, it should make it much easier to keep track of your Apple Pencil.

New design

The Apple Pencil (2nd-gen) is flat on one side, which allows the magnetic connection to the iPad Pro (2018) to be much stronger and sit flat against the side. It also has a matte finish instead of the glossy finish of the first-generation Apple Pencil.

New functionality

The Apple Pencil (2nd-gen) also allows you to double tap the pencil to switch between modes, even the eraser, making it easier than ever to access the mode you need while you’re using the Apple Pencil. Different apps offer different functionality with the double-tap action.

Compatibility

The Apple Pencil (2nd-gen) is currently only compatible with the 12.9-inch and 11-inch iPad Pro (2018) models. If you want an Apple Pencil for the older models of iPad Pro (or the 6th generation iPad) you’ll need the older generation Apple Pencil. The first-generation Apple Pencil does not work with the 2018 model iPad Pro.

How much does it cost?

The new Apple Pencil costs $129 and is available now.

Our list of tips and tricks will help you pair and charge your Apple Pencil, and guide you on navigating and using your tool to its fullest potential.

Apple Pencils and iPads are designed work together seamlessly to bring you a more streamlined workflow. Knowing how to use your Apple Pencil will allow you to get the most out of it. If you’re looking for Apple Pencil tips, you’ve come to the right place.

Jump to:

  • Best Uses for an Apple Pencil
  • Apple Pencil Tips & Tricks
  • Pair an Apple Pencil with an iPad (First & Second Generation)
  • Check Apple Pencil Battery Levels
  • Charge Your Apple Pencil (First & Second Generation)
  • Open the Notes App with Your Apple Pencil
  • Use & Customize Double Tap for Apple Pencil

Best Uses for an Apple Pencil

The Apple Pencil may seem like a tool from the past, but it can improve your iPad experience considerably. When you use your Apple Pencil to navigate your iPad, you’ll enjoy faster and more accurate navigation. You’ll also be able to take notes, doodle, mark up documents, and highlight with ease.

Unfortunately, it’s not easy to find thorough how-to resources for pairing, charging, and basic use of the Apple Pencil. This guide should answer your questions and maybe even provide you with some tips you didn’t already know!

Apple Pencil Tips & Tricks

Here are some great features of the Apple Pencil you may not know about:

  • Writing has been perfected on the Apple Pencil. When writing with this tool, the tip detects the pressure you are applying, along with your speed. The iPad then adjusts the line thickness of your pen strokes, just as if you were using a real pencil.
  • Your iPad detects when you are using your hand and when you are using your Apple Pencil, making everyday tasks simpler.
  • The iPad can detect your handwriting as words, allowing you to search for phrases you have written down using your Apple Pencil.
  • The Apple Pencil has a great battery, and should it run out, a brief charge will give you many minutes of use.

Using an Apple Pencil was intended to feel like using a regular pencil, and it achieves that goal with distinction. You can switch between using your finger and using the Apple Pencil as many times as you want without unpairing the Apple Pencil or changing settings. The iPad recognizes the change automatically, and adjusts its responses accordingly!

Continue reading to learn some need-to-know details about your Apple Pencil, along with a few tips.

How to Pair an Apple Pencil with an iPad

Pairing an Apple Pencil is simple, and is designed to be almost automatic.

Pair an Apple Pencil (2nd Generation) with Your iPad

  1. Bring the Apple Pencil close to the side of the iPad that has the volume buttons on it. It will magnetically attach to the iPad.

Image courtesy of Apple

  • A prompt to connect will pop up on top of the iPad screen.
  • Tap the prompt.
  • Now your second-generation Apple Pencil is paired with your iPad!

    Pair an Apple Pencil (1st Generation) with Your iPad

    1. Remove the Apple Pencil cap and plug it in to the Lightning port on your iPad.

    Image courtesy of Apple

  • A Pair button will appear.
  • Tap the Pair button.
  • This will pair your first-generation Apple Pencil with your iPad.

    How to Check Apple Pencil Battery Levels

    Once you have paired your Apple Pencil, each time you connect it, a prompt will appear showing your Apple Pencil battery level. Alternatively, you can swipe down from the top of your iPad to see the Control Center, where the battery levels of your various connected devices will be displayed.

    How to Charge Your Apple Pencil

    Charge Your Apple Pencil (2nd Generation)

    Connect the pencil to the side of your iPad that has the volume buttons on it. It should snap on, and a prompt at the top of your iPad screen will show you that your Apple Pencil is now charging.

    Charge Your Apple Pencil (1st Generation)

    Image courtesy of Apple

    With a first-generation Apple Pencil, you can either plug it in using the Lightning port on your iPad or use the charging adapter that came with your Apple Pencil.

    Open the Notes App with Your Apple Pencil

    On iPad models that support Tap to Wake, you can simply tap the screen of your iPad using the Apple Pencil and then begin drawing or taking notes. This can even be done from the Lock screen.

    How to Use & Customize Double Tap for Apple Pencil

    If you have a second-generation Apple Pencil, you can take advantage of the Apple Pencil Double Tap feature to switch back to the tool you used last while writing, drawing, and more. Simply use your finger to tap twice near the tip of the Apple Pencil to switch to the previous tool, and then tap twice again to switch back when you’re ready.

    You can customize the Double Tap feature, allowing you to show the color palette and switch between the current or the last tool used on Apple Pencil. To do this:

    1. Open the Settings app on your iPad.
    2. Tap on Apple Pencil.
    3. Select the Double Tap option you prefer.

    With these Apple Pencil tips, you’ll be well on your way to using your tool like a pro.

    Topics

    Author Details

    Author Details

    Erin MacPherson

    Erin is a Web Editor for iPhone Life and has been a writer, editor, and researcher for many years. She has a degree in communication with an emphasis on psychology and communication, and has spent many of her professional years as a coach in various business and specialty fields. Erin officially joined the ranks of iPhone and Apple users everywhere around nine years ago, and has since enjoyed the unique and customized feel of Apple technology and its many gadgets. When she’s not working, Erin and her son enjoy outdoor adventures, camping, and spending time with their eclectic collection of pets.

    After I used my apple pencil last night, I put it along side with my iPad Pro. I did not return the pencil back to its charging position.

    Just a moment ago, when I pick up the pencil and try to make it work with the iPad Pro again, the iPad Pro is simply not responding to any pencil move. I tried many different ways: drawing the pencil in vertical or horizontally across the screen, randomly scribble, the “swipe up from lower right corner” move to trigger screen capture, and tapping on the pencil itself. None of this can reconnect the pencil to the iPad Pro.

    When I return the pencil to its charging position, iPad reports that it still holds 70% of charge. So it is not a ‘flat battery’ issue.

    So what is the proper way to reconnect apple Pencil 2 to an iPad Pro?

    1 Answer 1

    Attaching Apple Pencil to the side of your iPad should connect it to your iPad. If that doesn’t work, Apple have some other steps you can try:

    If your Apple Pencil won’t pair with your iPad

    1. Make sure to center your Apple Pencil (2nd generation) on the magnetic connector on the right edge of the iPad. For an Apple Pencil (1st generation), remove the cap and plug your Apple Pencil into the Lightning connector on your iPad.
    2. Restart your iPad, then try to pair again.
    3. Go to Settings > Bluetooth and make sure that Bluetooth is turned on.
    4. On the same screen, look under My Devices for your Apple Pencil. If you see it, tap i. Then tap Forget this Device.
    5. Connect your Apple Pencil in to your iPad and tap the Pair button when it appears after a few seconds.
    6. If you don’t see the Pair button, wait for one minute while your Apple Pencil charges. Then try connecting your Apple Pencil again and wait until you see the Pair button.
    7. If you still don’t see the Pair button, contact Apple Support.

    By Charlie Sorrel • 1:00 pm, December 19, 2018

    • How-To
    • Top stories

    The new Apple Pencil is much nicer than the old one.
    Photo: Andrea Nepori

    Got a new Apple Pencil? Then you should change these two settings as soon as you’ve snapped it onto the side of your iPad Pro and experienced its satisfyingly solid magnetic click.

    Set Apple Pencil double-click action

    Once you pair your Apple Pencil 2 (by sticking it to the side of your iPad), a new panel appears in the Settings app:

    Set your Apple Pencil preferences in the new Settings panel.
    Photo: Cult of Mac

    You can see the option above, but here’s the list anyway:

    • Switch between current tool and eraser.
    • Switch between current tool and last used.
    • Show color palette.
    • Off

    The last one can probably be ignored. I currently have mine set to No. 2 in that list, Switch between current tool and last used. Many apps let you use a finger to erase, so I don’t need that in my settings. Show color palette is also good, but only useful in a painting app.

    My day-to-day Pencil use is marking up photos and maybe annotating PDFs. In that case, I like to switch between a regular black pen tool and either a red line or a highlighter. The Switch between current tool and last used option works well for both.

    Remember, too, that different apps may let you pick your own shortcuts. Ferrite Recording Studio, for example, lets you assign pretty much any shortcut to the double-tap. I have mine set to play/pause, which is perfect for that app.

    Using Apple Pencil with lock-screen notes

    The Notes app will obey the double-tap settings from the last section, but you might want to customize it further for the Apple Pencil.

    First is Allow Notes from Lock Screen. Switch this on. Now, when you tap the Pencil onto the screen of the sleeping iPad Pro, it will wake directly into a note. Thus, the $1,000-plus iPad Pro is finally as convenient as a piece of paper. Just tap and start writing or drawing.

    Once you switch this on, you can choose how and when the iPad creates a new note. The top section deals with the how: Do you want a new note every time? Or just the last note you were editing in the Notes app? (That latter one is less secure, as somebody only needs to tap your Pencil onto your iPad to see what you’re working on.)

    The second panel deals with the “when.” I have mine set to create a new lock-screen-only note every day. That way I have one page for each day, which is usually enough to jot down quick notes, and means that it’s also easy to find those notes. Notes is supposed to automatically title new notes, but that never seems to work for me in this case.

    That’s it. There’s a lot that the Apple Pencil can do, but these are the built-in settings you need to tweak to get the most out of it every day. Now all you need is to build the habit of using your new tablet.

    Hollis Johnson/Business Insider

    To pair an Apple Pencil with an iPad, you just need to connect the devices.

    • To pair an Apple Pencil with your iPad, you’ll need to physically connect the Pencil with the iPad. The way you do this depends onwhich version of the Pencil you have.
    • You can pair the 1st generation Apple Pencil with your iPad by plugging it into the iPad’s charging port, while the 2nd generation Pencil needs to be paired by connecting it to the side of the iPad.
    • Visit Business Insider’s homepage for more stories.

    With an Apple Pencil, your iPad becomes an artist’s canvas, an architect’s drafting paper, and a writer’s notebook. The Apple Pencil lets you “write” on an iPad with far more precision than you could ever muster from your finger, making drawing and writing much more enjoyable and precise.

    But before you can use an Apple Pencil with your iPad, you’ll need to pair the digital writing implement to the tablet.

    Complimentary Tech Event

    Fortunately, pairing an Apple Pencil with your iPad only takes a few seconds, whether you’re using the 1st or 2nd generation Apple Pencil.

    Check out the products mentioned in this article:

    iPad (From $799.99 at Best Buy)

    Apple Pencil (1st generation) (From $94.9.9 at Best Buy)

    Apple Pencil (2nd generation) (From $124.99 at Best Buy)

    How to pair a 1st Generation Apple Pencil to your iPad

    1. Remove the cap on the top of the Apple Pencil (the “eraser” end) to expose the charging plug.

    2. Insert the plug into the iPad’s Lightning charging port.

    Matt Weinberger/Business Insider

    You’ll need to plug your Apple Pencil into the iPad to pair it.

    3. Tap the “Pair” button that appears on your iPad’s screen.

    And that’s it, your Pencil is now paired until you turn the iPad off, switch on Airplane Mode, connect the Pencil to another iPad, or either device runs out of battery.

    How to pair a 2nd Generation Apple Pencil to your iPad

    1. Rest the Apple Pencil’s flat side on the right side of the iPad Pro. It should connect magnetically.

    Connecting your Pencil magnetically to the iPad will pair it.

    2. Tap the word “Connect” when it appears on screen.

    The iPad Pro is already the best iPad ever made and you can take it to the next level by adding an Apple Pencil to the mix. But you’ll need to know how to set it up and get the most out of it.

    With the addition of one accessory you can turn the iPad Pro into perhaps the very best digital note taking machine on the planet. It’s not just note taking, or Notes drawing and sketching tools, either. With tons of other drawing and painting apps in the App Store you’re only limited by your imagination rather than the technology. The Apple Pencil might not be cheap, but it’s a great accessory if you want to make the best use of your iPad Pro.

    How to Pair an Apple Pencil to iPad Pro

    1. Attach the Apple Pencil to the side of your iPad Pro, just below the volume buttons
    2. Once the magnets grab hold of the Apple Pencil a picture will appear on-screen. Simply tap the “Connect” button to complete the pairing process.

    How to Change an Apple Pencil’s Double-Tap Behavior

    Now that the Apple Pencil is paired you can alter what happens when you double-tap it.

    There are a handful of options and choosing the right one for you can make living with an Apple Pencil so much easier.

    1. Open the Settings app on your iPad Pro and then tap “Apple Pencil”.
    2. Tap the double-tap behavior that you would like to use.

    The next time you use the Apple Pencil, double-tapping the side of it will invoke the option you selected earlier. Note that some apps may override this option depending on their individual configurations, however.

    How to Charge an Apple Pencil

    The battery inside an Apple Pencil will last for a long, long time between charges. But it will need charging eventually.

    Simply place it on the side of your iPad Pro and and it will automatically start charging.

    An on-screen indicator will confirm the current charge status. You can also check Apple Pencil battery life easily through the Battery widget in iOS and iPadOS.

    Using an Apple Pencil with iPad Pro

    Using an Apple Pencil is as easy as could be. Placing the Apple Pencil tip onto the iPad Pro screen is all that is needed, so long as the app has Apple Pencil support built in.

    The Apple Pencil does not need to be turned on or off during use. Just place it back onto the side of your iPad Pro when you’re done and it’ll be ready and waiting for you the next time it’s needed.

    This guide assumes you’re using a modern Apple Pencil (2nd generation or later) with modern iPad Pro (2018 models and newer). Prior Apple Pencils and older iPad Pro models simply connected to one another by plugging the Apple Pencil into the Lightning port to connect to the iPad Pro, and that method still applies for the non-Pro iPad models too.

    Do you use an Apple Pencil with iPad Pro? Do you have any tips or suggestions for getting the most of it? Share your experiences in the comments below.