Categories
Interior

How to reboot google wifi from your phone

When you encounter problems with your new Google Pixel 3a and you don’t know what caused them, there’s always something you can do to make it work perfectly again and that’s to reset it. But as you know, there are different types of resets you can do to phones like this and that’s what we’re going to show you in this post.

After reading this article, you should be able how to perform the soft reset, factory reset and the master reset. If you have issues with your network or wireless connections, you can also reset the network settings in your phone. You may not have to use all of these methods at the same time but there will come a time when you have to and it’s better if you already knew how to do them. Continue reading as this guide may be able to help you one way or another.

Before anything else, if you have other issues with your device, try to browse through our troubleshooting page as we’ve already addressed several issues with this device. Odds are that we’ve already published a post that tackles similar problems. Try finding issues that have similar symptoms with what you currently have and feel free to use the solutions we’ve suggested. If they don’t work for you or if you still need our help, then fill up our questionnaire and hit submit to contact us.

Soft Reset or Forced Restart

This must be the first reset you should learn because there are times when a powerful device like your Pixel 3a will stop responding. Most of the time it’s due to a firmware crash which leaves your phone to become unresponsive even if you connect it to its charger. Glitches and crashes can be fixed by doing this very simple yet effective procedure.

It is a simulated battery removal which refreshes your phone’s memory as well as reloads all its apps and services. It’s different from the normal reboot and here’s how it’s done:

  • Press and hold the Power key for 30 seconds or until the logo shows on the screen.

Most of the time, when the phone is frozen and you did this, it would boot up successfully but there are times when it remains unresponsive. And if that’s the case, the next thing you have to do is this:

  1. Plug the original charger to a working wall outlet.
  2. Connect the phone to its charger using the original USB cable.
  3. Regardless whether your Pixel 3a shows the charging symbol or not, leave it connected to the charger for at least 10 minutes.
  4. After a few minutes of charging, press and hold the Power key for 30 seconds or until the logo shows on the screen.

As far as soft reset or forced restart is concerned, that’s how you do it. Now, let’s move on to other reset procedures.

Factory Reset via Settings menu

When it comes to resets, this is the most popular method used by a lot of owners. It’s easy to do and safe in all aspects. But the thing is, you can only use this method if your phone is responding or still working. Prior to doing this procedure, make sure to backup all your important files and data that are saved in your phone’s internal storage. You may copy them to your computer, sync them with your Google account or upload them to the cloud and that includes the following:

  • Contacts
  • Email accounts
  • System and app data
  • App settings
  • Downloaded apps
  • Media (music, pictures and videos, etc.)

After the backup, follow these steps to perform the Factory Reset on your Google Pixel 3a…

  1. From the Home screen, swipe up twice to view your apps.
  2. Tap Settings.
  3. Find and then tap System.
  4. Touch Advanced.
  5. Tap Reset options.
  6. Choose Erase all data (factory reset).
  7. Tap Reset phone.
  8. If prompted, enter your PIN, password or pattern and then tap Next.
  9. Tap Erase everything.
  10. The device will reboot and begin resetting to factory settings.

After the reset, your phone will prompt you to set it up again. You may retrieve your previous settings, apps and data or just set it up as a new device. It’s your choice. And that’s how to perform the factory reset on your Google Pixel 3a. Now, it’s time to move on to another variation of factory reset–the master reset.

Master Reset: Reset via Recovery Mode

A master reset is basically just a factory reset performed in a different way. It will become really useful if your Pixel 3a can no longer boot up successfully. There are times when a powerful smartphone can get stuck on the boot screen and when it happens, the best thing you can do is this.

If you’re only gonna do this instead of the other reset just to try it out, then make sure you create a backup of your important files and data. After which, it’s better to remove your Google account from your phone so that you won’t be locked out of your device after the reset, or make sure you knew your Google ID and password. After which, follow these steps to reset your phone:

  1. Turn off the device.
  2. Press and hold the Volume down and Power button at the same time.
  3. When the Pixel 3a logo shows, release the Power button but continue holding the Volume down button until you see the Android Recovery screen.
  4. Use the volume keys to highlight Wipe data/factory reset, then press the Power button.
  5. Use the volume keys to highlight Yes, then press the Power button. Wait while your information is deleted.
  6. Use the volume keys to highlight Reboot system now, then press the Power button.

Once the phone has finished rebooting, you will be asked to set up your phone again. Make sure to use the Google account you used prior to the reset.

Resetting Network Settings

When your Google Pixel 3a has some network issues and you can’t seem to figure out the reason behind it let alone fix it, then the best thing you can do is to reset its network settings. Doing it will delete the following:

  • Stored Wi-Fi networks
  • Stored tethered connections
  • Paired Bluetooth devices

Therefore, you will need to get your phone reconnect to the network it used to connect. Here’s how to reset its network settings:

  1. From the Home screen, swipe up twice to view your apps.
  2. Tap Settings > System > Advanced.
  3. Tap Reset Options > Reset Wi-Fi, mobile & Bluetooth > Reset settings.
  4. If prompted, enter your PIN or Password. Then tap the Next arrow.
  5. Tap Reset settings again to confirm.

Most of the time, this will fix any network issues including WiFi, Bluetooth and mobile data problems.

I hope that this article will be able to help you fix the problem with your phone using any of the reset methods we presented here. We would appreciate it if you helped us spread the word so please share this post if you found it helpful. Thank you so much for reading!

Connect with us

We are always open to your problems, questions and suggestions, so feel free to contact us by filling up this form . This is a free service we offer and we won’t charge you a penny for it. But please note that we receive hundreds of emails every day and it’s impossible for us to respond to every single one of them. But rest assured we read every message we receive. For those whom we’ve helped, please spread the word by sharing our posts to your friends or by simply liking our Facebook page or follow us on Twitter .

How to reboot google wifi from your phone

  • You can reset your Google Wifi in two different ways, to clear your data and refresh the device if it’s not functioning properly.
  • It’s possible to reset your Google Wifi directly on the device, but if you do so, your information may still be preserved on the Google Wifi app for up to six months.
  • If you reset your Google Wifi through the app, it will clear all data immediately.
  • Visit Business Insider’s homepage for more stories.

If your Google Wifi isn’t working properly, or you’re going to send the device back to Google, you should perform a factory reset first.

Resetting your Google Wifi wipes all data off the device, helping it work properly as well as protecting your data and erasing your settings.

Just note that if you perform a reset on the device itself, this information will still be preserved on the app for up to six months.

Here’s what you need to know to reset your Google Wifi, in two different ways.

Check out the products mentioned in this article:

Google Wifi (From $259 at Best Buy)

How to reset a Google Wifi on the device

1. Unplug the Google Wifi unit’s power cable.

2. Begin holding down the reset button on the back of the device.

3. With the button depressed, reconnect the power source.

4. When the unit flashes white, then blue, release the button.

If the hardware continues to flash blue for another half minute and then the lights turn solid blue, the reset is underway.

Once the blue flashing begins again, the device is reset and can be used like new or sent away.

How to reset a Google Wifi in the app

1. Pull up the Google Wifi app and click on the “Settings” section.

2. Open the “Network & General” tab.

3. Tap the “Wi-Fi points” tab under Network.

4. Tap “Factory Reset” and then confirm on the next screen by tapping the same words again.

Related coverage from How To Do Everything: Tech:

How to reset a Google Chromecast in 2 different ways to fix issues with the device

‘What is Google Chromecast?’: How to use Google’s smart device for TVs and monitors

How to Chromecast from a Mac computer, for streaming media or sharing your screen on a TV or larger display

How to use Google Chromecast from your iPad to stream media to a TV or display

Insider Inc. receives a commission when you buy through our links.

Articles

  • How to use your laptop as a Wi-Fi hotspot
  • What Flipkart’s devaluation means for Indian startups
  • Over 90% iPhone users are now on latest iOS version: Report
  • Facebook says data on 530 million users ‘scraped’ before September 2019
  • New UK regulator set to curb big tech’s power over news publishers

Wireless connectivity is a feature that has come a long way and something most people with smartphones and laptops simply can’t do without. For common users, a router at is a simple solution to convert their wired internet connection into a wireless one. Thus, enabling them to connect multiple devices at the same time.

But what happens if your router just stops working? And your data plan won’t suffice for the rest of the day? There is an easy way of keeping all your devices connected while you wait for the router to get fixed.

You can use your laptop’s inbuilt Wi-Fi chip to broadcast the connection across your home and connect your devices.

There are chances that your laptop is already running Windows 10 Anniversary Update . With the latest version, you can easily share your wired or even wireless network with devices.

Step 1:
Head over to the Settings menu in Windows , and select the ‘Network & Internet’ setting.

Step 2:
From the left navigation menu, select “Mobile hotspot”.

Step 3:
Toggle on the hotspot setting to share the connection. The Ethernet connection on your laptop can be shared as a hotspot in just a few seconds.

Step 4:
It obviously won’t be easy for you to remember the password that the system generates on its own. You can click on “Edit” to change the password to the hotspot connection.

You can also start sharing your internet connection using Connectify . The app is easy to install and setup. It works in the way as covered in the steps in above, but all the system settings are changed by the app directly through its interface.

When you encounter problems with your new Google Pixel 3a and you don’t know what caused them, there’s always something you can do to make it work perfectly again and that’s to reset it. But as you know, there are different types of resets you can do to phones like this and that’s what we’re going to show you in this post.

After reading this article, you should be able how to perform the soft reset, factory reset and the master reset. If you have issues with your network or wireless connections, you can also reset the network settings in your phone. You may not have to use all of these methods at the same time but there will come a time when you have to and it’s better if you already knew how to do them. Continue reading as this guide may be able to help you one way or another.

Before anything else, if you have other issues with your device, try to browse through our troubleshooting page as we’ve already addressed several issues with this device. Odds are that we’ve already published a post that tackles similar problems. Try finding issues that have similar symptoms with what you currently have and feel free to use the solutions we’ve suggested. If they don’t work for you or if you still need our help, then fill up our questionnaire and hit submit to contact us.

Soft Reset or Forced Restart

This must be the first reset you should learn because there are times when a powerful device like your Pixel 3a will stop responding. Most of the time it’s due to a firmware crash which leaves your phone to become unresponsive even if you connect it to its charger. Glitches and crashes can be fixed by doing this very simple yet effective procedure.

It is a simulated battery removal which refreshes your phone’s memory as well as reloads all its apps and services. It’s different from the normal reboot and here’s how it’s done:

  • Press and hold the Power key for 30 seconds or until the logo shows on the screen.

Most of the time, when the phone is frozen and you did this, it would boot up successfully but there are times when it remains unresponsive. And if that’s the case, the next thing you have to do is this:

  1. Plug the original charger to a working wall outlet.
  2. Connect the phone to its charger using the original USB cable.
  3. Regardless whether your Pixel 3a shows the charging symbol or not, leave it connected to the charger for at least 10 minutes.
  4. After a few minutes of charging, press and hold the Power key for 30 seconds or until the logo shows on the screen.

As far as soft reset or forced restart is concerned, that’s how you do it. Now, let’s move on to other reset procedures.

Factory Reset via Settings menu

When it comes to resets, this is the most popular method used by a lot of owners. It’s easy to do and safe in all aspects. But the thing is, you can only use this method if your phone is responding or still working. Prior to doing this procedure, make sure to backup all your important files and data that are saved in your phone’s internal storage. You may copy them to your computer, sync them with your Google account or upload them to the cloud and that includes the following:

  • Contacts
  • Email accounts
  • System and app data
  • App settings
  • Downloaded apps
  • Media (music, pictures and videos, etc.)

After the backup, follow these steps to perform the Factory Reset on your Google Pixel 3a…

  1. From the Home screen, swipe up twice to view your apps.
  2. Tap Settings.
  3. Find and then tap System.
  4. Touch Advanced.
  5. Tap Reset options.
  6. Choose Erase all data (factory reset).
  7. Tap Reset phone.
  8. If prompted, enter your PIN, password or pattern and then tap Next.
  9. Tap Erase everything.
  10. The device will reboot and begin resetting to factory settings.

After the reset, your phone will prompt you to set it up again. You may retrieve your previous settings, apps and data or just set it up as a new device. It’s your choice. And that’s how to perform the factory reset on your Google Pixel 3a. Now, it’s time to move on to another variation of factory reset–the master reset.

Master Reset: Reset via Recovery Mode

A master reset is basically just a factory reset performed in a different way. It will become really useful if your Pixel 3a can no longer boot up successfully. There are times when a powerful smartphone can get stuck on the boot screen and when it happens, the best thing you can do is this.

If you’re only gonna do this instead of the other reset just to try it out, then make sure you create a backup of your important files and data. After which, it’s better to remove your Google account from your phone so that you won’t be locked out of your device after the reset, or make sure you knew your Google ID and password. After which, follow these steps to reset your phone:

  1. Turn off the device.
  2. Press and hold the Volume down and Power button at the same time.
  3. When the Pixel 3a logo shows, release the Power button but continue holding the Volume down button until you see the Android Recovery screen.
  4. Use the volume keys to highlight Wipe data/factory reset, then press the Power button.
  5. Use the volume keys to highlight Yes, then press the Power button. Wait while your information is deleted.
  6. Use the volume keys to highlight Reboot system now, then press the Power button.

Once the phone has finished rebooting, you will be asked to set up your phone again. Make sure to use the Google account you used prior to the reset.

Resetting Network Settings

When your Google Pixel 3a has some network issues and you can’t seem to figure out the reason behind it let alone fix it, then the best thing you can do is to reset its network settings. Doing it will delete the following:

  • Stored Wi-Fi networks
  • Stored tethered connections
  • Paired Bluetooth devices

Therefore, you will need to get your phone reconnect to the network it used to connect. Here’s how to reset its network settings:

  1. From the Home screen, swipe up twice to view your apps.
  2. Tap Settings > System > Advanced.
  3. Tap Reset Options > Reset Wi-Fi, mobile & Bluetooth > Reset settings.
  4. If prompted, enter your PIN or Password. Then tap the Next arrow.
  5. Tap Reset settings again to confirm.

Most of the time, this will fix any network issues including WiFi, Bluetooth and mobile data problems.

I hope that this article will be able to help you fix the problem with your phone using any of the reset methods we presented here. We would appreciate it if you helped us spread the word so please share this post if you found it helpful. Thank you so much for reading!

Connect with us

We are always open to your problems, questions and suggestions, so feel free to contact us by filling up this form . This is a free service we offer and we won’t charge you a penny for it. But please note that we receive hundreds of emails every day and it’s impossible for us to respond to every single one of them. But rest assured we read every message we receive. For those whom we’ve helped, please spread the word by sharing our posts to your friends or by simply liking our Facebook page or follow us on Twitter .

How to reboot google wifi from your phone

If you’re ever having some issues with your Google WiFi system, or are just planning on selling it, here’s how to factory reset it and start from scratch.

Obviously, keep in mind that factory resetting Google WiFi will delete your Wi-Fi network and you won’t be able to connect to it, so make sure you’re ready to set up a new network immediately after.

To begin, open up the Google WiFi app on your phone and tap the right-hand side tab with the settings gear icon and three other circles.

How to reboot google wifi from your phone

Next, tap on “Network Settings”.

How to reboot google wifi from your phone

At the top, tap on “Wifi points”. There will also be a number next to it inside parentheses.

How to reboot google wifi from your phone

Select “Factory Reset”.

How to reboot google wifi from your phone

Tap on “Factory Reset” at the bottom.

How to reboot google wifi from your phone

Hit “Continue” when the pop-up appears.

How to reboot google wifi from your phone

This process will take about five minutes, and you can look at the progress bar below the text to see how far along it is.

How to reboot google wifi from your phone

Once the factory reset process is complete, hit “Done” at the bottom.

How to reboot google wifi from your phone

You’ll then be taken back to the setup process where you can begin to set it all up again if you’d like. Otherwise, just exit the app and unplug your Google WiFi units if you plan on selling or moving them.

If web pages aren’t loading or streaming video keeps buffering, resetting your router and modem is one of the first things you should try, as it can fix a slew of Wi-Fi or Internet connection problems.

This works just like rebooting your Windows PC when you’re having issues. The software on your router and modem will shut down and restart in a fresh state. When you restart your modem, it will reconnect to your Internet service provider (ISP). Some routers—especially older ones—can slow down over time as they run. This is a software problem, and a quick restart can fix it.

Locate Your Router and Modem

Your wireless router likely has visible antennas. It’s the device that hosts your Wi-Fi network. Your router plugs into your modem, which is the device that communicates with your Internet service provider.

These might not be two separate devices. Some ISPs offer combined router and modem units, so you might only have one device to reboot.

If you’re in doubt, find your wireless router and see what it’s plugged into. If it’s plugged directly into an outlet, it’s likely a combined unit. If it’s plugged into another device, that then plugs into an outlet, you have two devices, and the other one is your modem.

Restart Your Router and Modem

This is a simple process, and you won’t be doing anything fancy. You’ll lose your Internet connection and Wi-Fi during the restart process, but everything will automatically reconnect in a few minutes.

First, unplug the power from both your router and modem (or just the one device, if it’s a combined unit). You should see a power connection on the back of each device.

How to reboot google wifi from your phonetrainman111/Shutterstock

We recommend waiting at least ten seconds before plugging them back in; wait for 30 if you want to be thorough.

Waiting ensures the capacitors in your router and modem completely discharge and forget any settings. It also ensures that the modem loses its connection with your ISP and will have to re-establish it. Waiting might not always be necessary, but it ensures that everything is fully shut down and ready to start fresh.

Plug the power back into your modem. (If you have a combined unit, just plug it back in.) The lights on your modem will light up, and it will boot up and reconnect with your ISP. This process might take a few minutes.

You can tell whether it’s done by monitoring the lights on your modem—they might blink different colors or in a different pattern while connecting. There might also be an “Internet” light that turns green when the connection is established.

How to reboot google wifi from your phoneC. Nass/Shutterstock.com

Finally, plug your router back into its power source. Its lights will come on—if they don’t, you might have to press a power switch in your router, but this is rare.

Your router will boot back up, connect to your modem, and re-establish your Wi-Fi network. Your wireless devices will begin reconnecting to Wi-Fi, although it might take them a few minutes to do so. You might want to wait another few minutes before testing to see if your problem is resolved.

When you’re ready, try using your connection normally and see if everything’s working. If you’ve given it some time, and the lights on your modem are blinking strangely, the problem might be on your ISP’s end.

How to reboot google wifi from your phonetommaso79/Shutterstock

If you find yourself regularly rebooting your router to fix problems, try automatically rebooting it on a schedule.

A Faster Way to Reboot Your Router

The above method is the longer, more drawn-out version of this process. In our experience, it’s often good enough to simply unplug the modem and router from power, wait ten seconds, and then plug them both back in. They’ll boot back up and automatically sort things out.

However, some routers might struggle with this if they come online before the modem has connected to the Internet. Other devices might need more than ten seconds to ensure everything is wiped.

The first method is the safest to ensure you’re performing a full reboot and proper restart on any modem and router. If you frequently have to reboot your devices to fix problems, though, try this faster method and see if it works for you. It might save you some time.

Reboot vs. Reset

Note that “resetting” a router is another process. This term refers to performing a “factory reset” on your router, which wipes all your custom settings and returns it to its factory-default state. This option might be available in your router’s web interface. You might also see a “Reset” button on your router—usually, a small pinhole button you need a bent paperclip to press and hold—that will factory-reset your router.

Resetting is also a useful troubleshooting step if you’re having problems, but it’s different than simply rebooting your router or modem. It’s like the difference between rebooting your computer and reinstalling Windows (or “resetting,” as it’s called on Windows 10).

How to reboot google wifi from your phone

If you occasionally restart your Android device, it clears its memory and speeds things up. It can also be a quick fix for minor problems, like crashing apps. Here’s how to restart your Android smartphone or tablet to fix common issues.

Perform a Standard Restart

A “standard restart” means you reboot your device with the built-in software options. Press the power button on your device (it’s usually on the top or right side but can also be on the left) for a few seconds to launch the onscreen power menu. You don’t have to unlock your device to do this.

How to reboot google wifi from your phone

The onscreen power menu options might vary slightly depending on your device, and which version of Android it runs. Tap “Restart” if there’s an option to do so, and then wait for your device to reboot.

If you don’t see an option to restart, move on to the next method.

Turn It Off and Back On

You can also restart your Android smartphone or tablet manually by following the tried-and-true method of switching your device off, and then back on again.

The effect is the same as the previous method, and it’s a good alternative if your device doesn’t have a restart option in the power menu.

How to reboot google wifi from your phone

The same as before, hold the smartphone or tablet’s power button down for a few seconds to see the power options. Tap “Power Off” (or the equivalent on your device), and then wait for your phone or tablet to switch off completely.

Once your device is off, press the power button to turn it on again.

Perform a Hard Restart (or Hard Reboot)

If your device isn’t responding or you have trouble completing a typical reboot, you can perform a hard reset (or hard reboot) instead.

Don’t worry—this isn’t the same as a factory reset. This option is just a more drastic method of turning your Android device off and back on. It’s like holding the power button down on your computer.

To give this a go, press and hold the power button for at least 20 seconds. If Android isn’t responding, this will (usually) force your device to reboot manually.

Remove the Battery

Sleek smartphones and tablets are all the rage these days. Manufacturers now use integrated, nonremovable batteries to reduce the overall size of the hardware.

How to reboot google wifi from your phone

If you’re lucky enough to have a device with a removable battery, and it still won’t restart, you can remove the battery. We recommend you try to turn off your device before you pull the battery.

To begin, carefully remove the back casing from your device. Each manufacturer has a different way you can do this, but there are usually little areas where you can get your nail or a thin plastic spatula underneath to separate the two pieces. Avoid using any tools that might puncture the battery or otherwise damage your device.

After you remove the battery, put it back in, and then press the power button to turn on your device again.

Use ADB to Reboot From Your PC

If the power button is broken, you might be able to plug your device into a computer and use the Android Debug Bridge (ADB) tool to reboot it. This tool—provided by Google—allows several remote operations, including rebooting your smartphone or tablet.

First, you have to install ADB with the Android SDK along with your Android device drivers. You also need to make sure USB debugging is enabled in the developer options area of your Android settings.

How to reboot google wifi from your phone

Connect your device to your computer with a USB cable, open Command Prompt or Terminal, and then type adb devices to make sure your device is detected. If it isn’t, double-check that you correctly installed the drivers for your device and followed the setup guides linked above.

If you see your device listed, type adb reboot and your Android device should reboot normally.

If All Else Fails, Factory Reset

When you troubleshoot problems on your Android device, a restart should always be your first step. This is often all that’s required to get things back to normal. But not always.

Android devices do slow down over time. If a reboot doesn’t help, a factory reset might be the only way to get your device back in working order.

How to reboot google wifi from your phone

Mesh Wi-Fi networking is all the rage lately, and even Google has gotten in on the fun. Here’s how to set up Google WiFi in order to get rid of dead spots at all corners of your house or apartment.

If you’re not familiar with what mesh Wi-Fi is and how it works, we have an explainer that can get you caught up. But essentially, mesh Wi-Fi systems are a set of wireless routers that you place around your house. From there, they all connect together and carpet-bomb your house with the best Wi-Fi signal possible.

Google WiFi is just one of the many mesh Wi-Fi systems on the market, similar to Eero or Luma. Here’s how to set it up.

Start by unboxing the Google WiFi units and grab one to use as your main unit that you’ll connect to your modem (or router, if you’re looking to keep the advanced features of your old router). You’ll need the power cord, as well as the ethernet cable that’s included.

How to reboot google wifi from your phone

Next, plug in the first Google WiFi unit into an outlet and connect the other end into the USB-C port on the bottom of the unit. Then take the ethernet cable and plug one end into the ethernet port on your modem and the other end into the green ethernet port on the Google WiFi unit. If you have a modem/router combo, simply just plug the ethernet cable into any one of the numbered ethernet ports on the combo unit.

How to reboot google wifi from your phone

The Google WiFi unit will automatically power up. While it’s doing that, go ahead and download the Google WiFi app to your iPhone or Android device.

How to reboot google wifi from your phone

Once the app is installed, open it up and tap on “Sign In” down in the lower-right corner of the screen.

How to reboot google wifi from your phone

If you have multiple Google accounts connected to your device, select the one you want to use with Google WiFi. Otherwise, tap on “Add account” to sign in to your Google account.

How to reboot google wifi from your phone

Next, tap on “Get Started” in the bottom-right corner.

How to reboot google wifi from your phone

The app will automatically begin looking for the Google WiFi unit that you hooked up. Once it finds it, it will ask you to scan the QR code on the bottom of the unit. You can either use the camera on your phone by tapping on “Scan Code”, or enter in the code manually by selecting “Type Code”.

How to reboot google wifi from your phone

Next, you’ll select from the list where your Google WiFi unit is located, and then hit “Next”.

How to reboot google wifi from your phone

You’ll then type in a new Wi-Fi network name, as Google WiFi creates a whole new Wi-Fi network. Hit “Next” when finished.

How to reboot google wifi from your phone

On the next screen, enter in a password that users will type in in order to access the network. Tap on “Create Network” when finished.

How to reboot google wifi from your phone

The app will take a few moments to create your Wi-Fi network.

How to reboot google wifi from your phone

All you have to do now is go into your phone’s settings and switch to your new Wi-Fi network that was created by Google WiFi.

How to reboot google wifi from your phone

After that, you can go back into the app and begin the process of setting up more Google WiFi units around your house. Start by selecting how many more units you want to set up and tap “Next” at the bottom.

How to reboot google wifi from your phone

Go ahead and plug in the next Google WiFi unit and hit “Next” in the app until you get to the room selection screen. Just like before, select the room that your second unit is located in and hit “Next”.

How to reboot google wifi from your phone

Once it’s connected, you’ll now test the connection to see if the distance between these two units is sufficient. Hit “Test Now” in the bottom-right corner.

How to reboot google wifi from your phone

Give it a minute to run the test, and when it’s done, tap on “Next”. If it says there was a problem, then you’ll need to move your second unit a bit closer to the main unit to get a better connection.

How to reboot google wifi from your phone

You’ll repeat this same process for setting up your third Google WiFi unit, including where it’s located and running the Wi-Fi test.

After that, an overview of your Wi-Fi network will show on the screen. Make sure everything looks good and then tap on “Next”.

How to reboot google wifi from your phone

Next, your Google Wifi units may need to apply an update, which could take a few minutes, so let it do its thing and it will let you know when it’s done.

How to reboot google wifi from your phone

Once the update is complete, tap on “Explore” to be taken to the main screen of the app.

How to reboot google wifi from your phone

You’ll have three tabs to choose from. The first tab is the main screen of sorts where various cards appear when something new happens to your network.

How to reboot google wifi from your phone

The middle tab shows you an overview of your Wi-Fi network, like how many mesh units you’re using and how many devices are connected to your network. You can tap on any of the circles to get even more details.

How to reboot google wifi from your phone

The last tab is where all of the settings are, like guest Wi-Fi, setting up family Wi-Fi, and performing network tests.

How to reboot google wifi from your phone

That’s all there is to it! There are quite a bit of steps, but they’re easy to follow and it really only takes about 5-10 minute to get your Google WiFi network all set up and ready to go.

Factory reset isn’t the only way to resolve communication problems with your Google smart speaker.

How to reboot google wifi from your phone

If you’re having trouble connecting your Google Home to your network, other devices or the cloud, try these troubleshooting tips.

Connectivity issues are the worst, but they drive me especially batty when the device that’s causing me trouble doesn’t have its own screen. When my Google Home smart speaker conks out and disconnects from Wi-Fi or Google Assistant’s AI, it’s not like it can tell me what’s wrong. (Unless I’m using a Nest Hub or Hub Max , which have screens and are marginally easier to troubleshoot.)

There are a handful of different situations when connectivity problems are most likely to happen, like when you’re setting up a new Google Home smart speaker, attempting to control a smart home device with your Google Home or when you’re using Google Assistant to get something done — play music , check the weather , etc. — on the device itself. I’ve dealt with all of them.

Google Home Tips

All the latest Google news delivered to your inbox. It’s FREE!

Power up your Android

Here’s what I’ve done to troubleshoot (and fix) a Google Home that just won’t connect or stay connected.

Problem: ‘Could not communicate’ setup error

This one is the bane of Google Home aficionados everywhere because it stands in the way of getting a new speaker up and running. What’s worse, it sneaks up on you. You’ll plug in your new speaker, open the Google Home app on your phone and see a new speaker ready for setup.

You tap through all the options and everything seems to be coming along swimmingly, when out of the blue your new speaker disappears from the app, right after you tell it which Wi-Fi signal is yours. This could happen, too, if you’re merely rebooting a misbehaving device.

Duct tape can’t fix everything — especially not Google Home connectivity problems.

The solution to this one might seem like pure sorcery, but it’s consistently worked for me with several speakers that would get lost right in the middle of setup.

1. Switch the phone you’re using the Google Home app on to airplane mode.

2. Manually turn on Wi-Fi (but only Wi-Fi).

3. Open the Google Home app and set up like usual.

Problem: Google Home can’t connect to your smart home

You don’t quite appreciate how easy it is to use your voice to control your lights , thermostat and other smart home gear like connected garage door openers until suddenly you can’t. Sure, you could always get up off your keister and flip switches with your finger like some kind of cave dweller, but, if you’re anything like me, the problem will gnaw at you until you fix it.

If your Google Home can’t connect to your smart bulbs, you’ll be stuck flipping switches until the problem is resolved.

Also, if you’re like me, your first instinct will be to reboot your modem and router, or, worst-case, the Google Home smart speaker and the device you’re trying to control it with. Fact of the matter is, rebooting works nine out of 10 times. Here are the steps for the remaining 10% of cases when it doesn’t:

1. Open the Google Home app on your phone or tablet.

2. Tap the Settings (gear symbol) icon and scroll to the bottom.

3. Tap Works with Google and find the device that quit working on the list.

4. If the device is listed, tap it then tap Unlink account, tap Unlink to confirm, then tap Settings > Works with Google again after the app returns to the home screen.

5. If the device isn’t listed (or it was but you unlinked it and navigated back to the Works with Google menu), tap the Search (magnifying glass) icon in the upper right corner and type the name of the device.

6. Type the device name in the search results and follow prompts to connect it to Google Home.

Problem: Google Home says, ‘Something went wrong’

Every once in a while, Google Home just can’t play music, turn on your lights or even tell you what time it is no matter how nicely you ask. If your Google Home simply refuses to do anything, and comes back at you with a message like, “Oops, something went wrong” or, “There’s a glitch,” the problem might be a bit beyond your control.

If you’ve tried everything and your Google Home still won’t connect, the problem may be on Google’s end, with servers like these Google machines at a data center in Iowa.

Every interaction you have with Google Home gets processed remotely on Google servers and, believe it or not, sometimes they go down. If you’ve already rebooted everything and walked through every troubleshooting guide you could find and still Google Home won’t lift a virtual finger to help you, you might just have to wait until Google fixes it on their end.