Categories
Interior

How to shut down and restart your synology nas manually and automatically

How to shut down and restart your synology nas manually and automatically

There’s more than one way to shutdown and restart your Synology NAS, including physical interaction with the NAS, software, and scheduled events. Let’s look at all three methods now.

RELATED: How to Set Up and Get Started with Your Synology NAS

Typically your Synology NAS functions more like a piece of network hardware (like your router) and less like a computer, so more often than not—just like your router—you’ll leave it to hum along in the background doing NAS stuff (archiving your files, automating your downloads, and so on). On the rare occasion you need to restart your NAS, however, you’ll need to do a little poking around because, unlike a desktop system, methods for shutting down or restarting your NAS are (intentionally) not front and center.

How to Physically Shut Down Your Synology NAS

The first method is both the most intuitive and least intuitive method all at once: the power button. On the one hand, it’s intuitive because, well, it’s a power button. That’s what power buttons do; they turn things on and off. On the other hand, if you’re a veteran computer user, you’ll cringe at the idea of turning off your NAS with the power button because in the PC world, pressing and holding the power button is the physical shortcut for a hard power reset.

How to shut down and restart your synology nas manually and automatically

On your Synology NAS, however, pressing and holding the power button on the device does not trigger a hard reset by cutting the power. Instead, if you press and hold the button until you hear a beep sound, your NAS will gracefully shut down with the operating system handling the shutdown sequence as if you’d initiated the command through the software interface. To restart your NAS, simply press the power button again.

How to Shutdown and Restart through DiskManager

If you want to shutdown or restart your Synology NAS via the web-based interface, you’ll need to log in and look to the icons in the upper right corner. Click the options menu, indicated by the little head and shoulders bust icon.

How to shut down and restart your synology nas manually and automatically

From there you can select either “Restart” or “Shutdown” to perform the desired task. If you restart you’ll need to wait a minute or two to regain access to the web interface. If you shutdown, you’ll need to physically visit the NAS and press the power button to gain access to the device again.

How to Schedule Shutdowns and Startups

If you want to automatically schedule when your NAS shuts down and boots up, you can do so using the power scheduling feature. Before we dive into how to schedule your shutdowns and startups, however, there’s one big thing worth noting. If there are any scheduled tasks (such as scheduled backups), or a critical system function (such disk repairs or operating system updates), then the scheduled power states are overridden. To avoid frustration and failed configurations, either change your already existing scheduled tasks (if any) or plan your power schedule around them.

To access the power scheduler, click the menu button in the web-based interface, and then select the “Control Panel” option.

How to shut down and restart your synology nas manually and automatically

If you don’t already have the advanced view open in your Control Panel, click “Advanced Mode” in the upper right hand corner.

How to shut down and restart your synology nas manually and automatically

Select “Hardware & Power” from the “System” section of your Control Panel.

How to shut down and restart your synology nas manually and automatically

Within the Hardware & Power menu, select the “Power Schedule” tab, and then click the “Create” button to create your first power management rule.

How to shut down and restart your synology nas manually and automatically

The scheduling system is simple and straightforward. Each rule is either a “Startup” or “Shutdown” rule with a day and time indicator.

How to shut down and restart your synology nas manually and automatically

Let’s say, for the sake of example, that we only want to have our NAS active for a few hours in the early morning on Sundays and Wednesdays (which is when all of our theoretical computers are scheduled to back up to it). To create such a rule, we would first create a “Startup” rule to indicate when we want the NAS to power on. Click the “Date” selection drop down menu and check off the days you want the startup even to occur on and then select the time of day using the “Time” menus. The time menu uses 24 hour time.

How to shut down and restart your synology nas manually and automatically

Repeat this process for the “Shutdown” times, selecting a date and time that corresponds to your needs. When you’ve created the rules, you’ll see them on the “Power Schedule” tab, as seen below. We have our NAS configured to start up at 1:00AM on Sunday and Wednesday and shut down at 6:00AM on the same days. When you’re happy with the rules, click the “Save” button.

How to shut down and restart your synology nas manually and automatically

At any time, you can return to the Power Schedule menu and disable (by unchecking) or completely delete (via the “Delete” button) the power management rules you’ve created. If you do either, be sure to disable or delete the companion rule so you don’t end up in a situation where there is a shutdown rule with no companion startup rule.

Synology DiskStation User’s Guide. Based on DSM Document ID. DSMUGENU. Applied Models DS DS+. DSj. DS+. DS . DSj. Synology DiskStation User’s Guide. Based on DSM Document ID Syno_UsersGuide_DS_ Page 2. 2. Table of Contents. Chapter 1: Introduction. Ds+ Manual Pdf. MB/s reading, Dual LAN with failover and Link Aggregation support, USB and eSATA interface included, Easy setup with tool-less and.

Author: Kigatilar Nikogal
Country: Bahrain
Language: English (Spanish)
Genre: Photos
Published (Last): 16 June 2007
Pages: 206
PDF File Size: 10.65 Mb
ePub File Size: 9.23 Mb
ISBN: 217-6-33291-824-1
Downloads: 49813
Price: Free* [*Free Regsitration Required]
Uploader: Yosho

Replay function or menu moving function B.

Enter text from picture: We have our NAS configured to start up at 1: Operation is subject to the following two conditions:. It can be set from Relay1 to Relay4.

How to Shut Down and Restart Your Synology NAS Manually and Automatically

For DS cleaning, gently wipe the outside with a clean dry cloth. Increase the separation between the equipment and receiver. Page 13 User Manual V0. Reorient or relocate the receiving antenna. Page 6 User Manual V0.

WebGate DS412 User Manual

Monitor It is to monitor real time image. If selecting it, all local cameras are listed up.

Got it, continue to print. Whenever pressing the button, reverse replaying speed increases Don’t have an account? When selecting one for changing, the related dialogue box is indicated.

Download Center – DS+ | Synology Inc.

Nanual first method is both the most intuitive and least intuitive method all at kanual Click the options menu, indicated by the little head and shoulders bust icon.

Comments to this Manuals Your Name. Page of 13 Go. Don’t show me this message again. Any changes or modifications in construction of this device which are.

Hdf-pdr series; hdcf-pd series; hdcf-pd series; hd-cctv dvr full hd pages. To restart your NAS, simply press the power button again. Page 4 User Manual V0. January, 28, Revision Date: Joinsubscribers and get a daily digest of news, comics, trivia, reviews, and more.

Download Center

The Best Tech Newsletter Anywhere. February, 25, 1. Danger of explosion if battery is incorrectly replaced.

This equipment generates, uses and can radiate radio. To confirm the manhal menu HELP: To print the manual completely, please, download it. On your Synology NAS, however, pressing and holding the power button on the device does not trigger a hard reset by cutting the power.

How to shut down and restart your synology nas manually and automatically

The time menu uses 24 hour time. It is for sending digital output signal in case of alarm triggered event MD or Sensor. If you want to automatically schedule when your NAS shuts down and boots up, you can do so using the power scheduling feature.

This equipment has been tested and found to comply with the limits for a. Page 5 User Manual V0.

DSj, DSj, DSj, DS, DS+, DS+,. DS, DS+ Products), the accompanying manuals and other documents, and on-line or electronic. View and Download Synology DiskStation user manual online. DiskStation User’s Guide Applied Model: DSj, DSj, DSj, DS, DS+, DS+. There’s more than one way to shutdown and restart your Synology NAS, including physical interaction with the NAS, software, and scheduled.

How to shut down and restart your synology nas manually and automatically

Author: Fekree Bagami
Country: Argentina
Language: English (Spanish)
Genre: Technology
Published (Last): 1 August 2012
Pages: 206
PDF File Size: 12.71 Mb
ePub File Size: 1.44 Mb
ISBN: 264-2-76243-465-4
Downloads: 4627
Price: Free* [*Free Regsitration Required]
Uploader: Nikodal

We have provided a few recommended NTP servers. Joinsubscribers and get a daily digest of news, comics, trivia, reviews, and more. Don’t have an account?

Download Center – DSj | Synology Inc.

Page 10 – Enjoying Entertainment Content on the Se Choose System administrator admininput password and click Enter. You have following options: To print the manual completely, please, download it.

For detailed function descriptions, please click Help on the Volume page. It will start automatically when the server Panel starts. Page 4 Synology reserves ds2100j rights to revise or update its Products, other products, software, or related documentation without further notice.

How to shut down and restart your synology nas manually and automatically

Capacity 2 x 2TB hard drives. The fan is built to exhaust waste heat out of Synology Back DiskStation. You can designate portion of your volume space to be an iSCSI Target, which will allow clients to access the space like a local disk.

Smarthome Office Rs210j Linux. There are two options for you to enter the management UI: Synology DiskStation User Manual pages. High performance nas server scales up to 18 drives for smb users 2 pages. On your Synology NAS, however, pressing and holding the power button on the device does not trigger a hard reset by cutting the power.

Managing Volume Synology DiskStation provides hot swapping function. You can refer to the disk status on the management UI, or the front panel Es210j indicators to identify crashed disks, and directly pull out the hard drive tray to replace the crashed disk with a new one.

For any questions other than that, please visit Synology Inc. Surveillance Station requires IE 7.

How to Shut Down and Restart Your Synology NAS Manually and Automatically

Remove the replaced hard drive. Iscsi Target You can designate portion of your volume space to be an iSCSI Target, which will allow clients to access the space like a local disk.

How to shut down and restart your synology nas manually and automatically

Comments to this Manuals Your Name. Backup Solutions Synology DiskStation provides the following personal data backup solutions: Replace the internal hard drives with larger ones.

Surveillance Station 3 By using Surveillance Station 3, you can monitor the live image of various IP cameras attached on the network, customize video recording options, mqnual choose among Continuous Recording, Motion Detection Recording, and Alarm Recording modes.

Some digital cameras are defined as a Still Image Device, such as Canon.

Synology DiskStation User Manual

To avoid frustration and failed configurations, either change your already existing scheduled tasks if any or plan your power schedule around them. To restart your NAS, simply press the power button again.

Don’t show me this message again. Synology warrants that every hardware portion of the You will find an online Help button at the upper right corner of every page of the Web Management UI. Also, you can upload or download multiple files at the same time.

Auto Block The default password of the admin account is blank. If you want to automatically schedule when your NAS shuts down and boots up, you can do so using the power scheduling feature.

How to shut down and restart your synology nas manually and automatically

Choose a Synology DiskStation. We have our NAS configured to start up at 1: Joinsubscribers and get a daily digest of news, geek trivia, and our feature articles.

Download Center

Synology reserves all rights to revise or update its Products, other products, software, or related documentation without further notice. Click the options menu, indicated by the little head and shoulders bust icon.

The first method is both the most intuitive and least intuitive method all at once: Data Replicator 3 was installed. Got it, continue to print. Turn off the Synology DiskStation. Please refer to product specification for further details. Mac Manuak X User The scheduling system is simple and straightforward.

DSj, DSj, DSj, DS, DS+, DS+,. DS, DS+ Products), the accompanying manuals and other documents, and on-line or electronic. View and Download Synology DiskStation user manual online. DiskStation User’s Guide Applied Model: DSj, DSj, DSj, DS, DS+, DS+. There’s more than one way to shutdown and restart your Synology NAS, including physical interaction with the NAS, software, and scheduled.

How to shut down and restart your synology nas manually and automatically

Author: Bagal Bami
Country: Mexico
Language: English (Spanish)
Genre: Career
Published (Last): 10 August 2012
Pages: 227
PDF File Size: 15.46 Mb
ePub File Size: 2.72 Mb
ISBN: 830-5-36571-948-6
Downloads: 26808
Price: Free* [*Free Regsitration Required]
Uploader: Neshicage

You can designate portion of your volume space to be an iSCSI Target, which will allow mnual to access the space like a local disk.

How to Shut Down and Restart Your Synology NAS Manually and Automatically

Mac OS X User With Link Aggregation enabled, trunking and network fault tolerances are supported. Windows Mac iPhone Android. To print the manual completely, please, download it. Data Replicator 3 was installed. The Best Tech Newsletter Anywhere.

Page 4 Synology reserves all rights to revise or update its Products, other manuql, software, or related documentation without further notice.

Managing Volume Synology DiskStation provides hot swapping function. On File Station 2, you can drag-n-drop to move files among folders, and use the right-click action to manage the files. The default password of the admin account is blank. Please refer to product specification for further details. To avoid frustration and failed configurations, either change your already existing scheduled tasks if any or plan your power schedule around them.

Back up all data stored on the Synology DiskStation. Backup Solutions Synology DiskStation provides the following personal data backup solutions: There are two options for you to enter the management UI: Turn off dx210j Synology DiskStation. We have our NAS configured to start up at 1: Getting to know your Synology DiskStation Specification For the most recent product specification, please visit www.

Some digital mannual are defined as a Still Image Device, such as Canon. Page 10 – Enjoying Entertainment Content on the Se Capacity 2 x ds21j0 hard drives. Synology reserves all rights to revise or update its Products, other products, software, or related documentation without further notice. Surveillance Station requires IE 7. Choose a Synology DiskStation. If you want to ds210h schedule when your NAS shuts down and boots up, you can do so using the power scheduling feature.

You have following options: The scheduling system is simple and straightforward. Joinsubscribers and get a daily digest of news, comics, trivia, reviews, and more. Some of the functions may only be available on specific models. By pressing ‘print’ button you will print only manuwl page.

Synology DiskStation DS210j

Administrator can setup access rights for users to dw210j shared folders. Synology DiskStation User Manual pages. Table of Contents Add to my manuals Add. The Best Tech Newsletter Anywhere Joinsubscribers and get a daily digest of news, geek trivia, and our feature articles.

To restart your NAS, simply press the power button again.

Download Center

Synology DiskStation provides hot swapping function. Specification Getting to know your Synology DiskStation Specification For the most recent product specification, please visit www.

Comments to this Manuals Your Name. Don’t have an account?

SYNOLOGY DISKSTATION USER MANUAL Pdf Download.

Auto Block The default password of the admin account is blank. You will find an online Help button at the upper right corner of every page of the Web Management UI. Remove the replaced hard drive.

We have provided a few recommended NTP servers. Click the options menu, indicated by the little head and shoulders bust icon.

Got it, continue to print. It will start automatically when the server Panel starts. Joinsubscribers and get a daily digest of news, geek trivia, and our feature articles.

Smarthome Office Security Linux. The time menu uses 24 hour time. Surveillance Station 3 By using Surveillance Station 3, you can monitor the live image ds2210j various IP cameras attached on the network, customize video recording options, and choose among Continuous Recording, Motion Detection Recording, and Alarm Recording modes.

How to shut down and restart your synology nas manually and automatically

Existuje více než jeden způsob, jak vypnout a restartovat Synology NAS, včetně fyzické interakce s NAS, softwarem a naplánovanými událostmi. Podívejme se nyní na všechny tři metody.

SOUVISEJÍCÍ: Jak nastavit a začít s Synology NAS

Synology NAS funguje spíše jako síťový hardware (jako váš směrovač) a méně počítač, tak častěji než ne – stejně jako váš router – necháte to, aby se bity v pozadí dělají věci NAS (archivace souborů, automatizace stahování a podobně). Při výjimečné příležitosti je třeba restartovat váš NAS, nicméně budete muset trochu pokoušet, protože na rozdíl od stolního systému nejsou způsoby vypnutí nebo restartování NAS (záměrně) přední a středové.

Jak fyzicky vypnout Synology NAS

První metoda je nejintegrovanější a nejméně intuitivní metoda najednou: tlačítko napájení. Na jedné straně je to intuitivní, protože je to tlačítko napájení. To je to, co moc tlačítka dělají; zapínají a vypínají věci. Na druhou stranu, pokud jste veteránem počítače, narazíte na myšlenku vypnutí NAS pomocí tlačítka napájení, protože ve světě počítačů stisknutím a podržením tlačítka napájení je fyzická zkratka pro silný výkon

How to shut down and restart your synology nas manually and automatically

Na vašem zařízení Synology NAS však stisknutím a přidržením tlačítka napájení na zařízení nedojde ke spuštění hardwarového resetu. Místo toho, pokud stisknete a podržíte tlačítko, dokud neuslyšíte pípnutí, váš NAS se laskavě vypne s operačním systémem, který řídí sekvenci vypnutí, jako kdyby jste spustili příkaz prostřednictvím softwarového rozhraní. Chcete-li restartovat systém NAS, jednoduše stiskněte tlačítko napájení.

Jak vypnout a restartovat pomocí nástroje DiskManager

Chcete-li vypnout nebo restartovat Synology NAS prostřednictvím webového rozhraní, musíte se přihlásit a podívejte se na ikony v pravém horním rohu. Klepněte na nabídku možností označenou ikonou poprsí hlavy a ramen.

How to shut down and restart your synology nas manually and automatically

Odtud můžete zvolit buď “Restart” nebo “Shutdown” pro provedení požadované úlohy. Pokud restartujete, budete muset počkat minutu nebo dvě, abyste získali přístup k webovému rozhraní. Pokud vypnete, musíte fyzicky navštívit NAS a stisknout tlačítko napájení, abyste získali přístup k zařízení.

Jak naplánovat vypnutí a spuštění

Pokud chcete automaticky naplánovat, kdy se váš NAS vypne a můžete spustit funkci Power Schedule. Než se ponoříme do plánování výpadků a startupů, je tu jedna velká věc, která stojí za zmínku. Pokud existují nějaké naplánované úlohy (např. Naplánované zálohy) nebo kritická systémová funkce (například opravy disků nebo aktualizace operačního systému), jsou naprogramovány naplánované stavy napájení. Chcete-li se vyhnout frustraci a neúspěšným konfiguracím, buď změňte již existující naplánované úlohy (pokud existují) nebo naplánujte plán napájení kolem nich.

Chcete-li získat přístup k plánovači napájení, klepněte na tlačítko nabídky v rozhraní webového rozhraní a poté vyberte “Ovládací panely”

How to shut down and restart your synology nas manually and automatically

Pokud v ovládacím panelu ještě nemáte rozšířené zobrazení, klikněte v pravém horním rohu na “Pokročilý režim”.

How to shut down and restart your synology nas manually and automatically

Zvolte “Hardware a napájení” “V ovládacím panelu

How to shut down and restart your synology nas manually and automatically

V nabídce Hardware & Power vyberte kartu” Naplánovat napájení “a poté klikněte na tlačítko” Vytvořit “a vytvořte si první pravidlo správy napájení.

How to shut down and restart your synology nas manually and automatically

Systém plánování je jednoduchý a přímý. Každé pravidlo je buď pravidlem “Startup” nebo “Shutdown” s indikátorem den a času.

How to shut down and restart your synology nas manually and automatically

Řekněme například, že chceme, aby byl náš NAS aktivní jen několik hodin brzy ráno V neděli a ve středu (což je doba, kdy jsou všechny naše teoretické počítače naplánovány na zálohu). Chcete-li vytvořit takové pravidlo, nejdříve bychom vytvořili pravidlo “Startup”, které by naznačovalo, kdy chceme, aby se systém NAS zapnul. Klepněte na rozbalovací nabídku Výběr datumu a zkontrolujte, zda se má spustit dokonce i zahájení, a poté pomocí časových nabídek vyberte denní čas. Časové menu používá 24 hodin.

How to shut down and restart your synology nas manually and automatically

Opakujte tento proces pro časy “vypnutí” a vyberte datum a čas, které odpovídají vašim potřebám. Když jste pravidla vytvořili, uvidíte je na kartě “Naplánovat napájení”, jak je vidět níže. Máme náš NAS nakonfigurován tak, aby začínal v 1:00 ráno v neděli a ve středu a ukončil v 6:00 ve stejných dnech. Když jste spokojeni s pravidly, klikněte na tlačítko Uložit.

How to shut down and restart your synology nas manually and automatically

V každém okamžiku se můžete vrátit do nabídky Naplánování napájení a vypnout (odškrtnutím) nebo zcela smazat (tlačítkem “Odstranit”) výkon které jste vytvořili. Pokud tak učiníte, nezapomeňte zakázat nebo smazat pravidlo družice, abyste neskončili v situaci, kdy existuje pravidlo vypnutí bez spouštěcího pravidla.

How to shut down and restart your synology nas manually and automatically

Zapnutí a vypnutí světla pomocí hlasu je jednou z nejlepších věcí, pokud jde o inteligentní domov. Pokud však nemáte Amazon Echo nebo Home Google, můžete použít skript AutoHotkey k ovládání osvětlení Philips Hue z vašeho počítače. SOUVISEJÍCÍ: Průvodce pro začátečníky AutoHotkey Script Pro tuto příručku budeme používat AutoHotkey, úžasný malý program, který vám umožní napsat vlastní skripty pro automatizaci a dokonce přemapovat klávesy na klávesnici.

How to shut down and restart your synology nas manually and automatically

Intel Management Engine je od roku 2008 součástí chipsetů Intel. Je to v podstatě malý počítač uvnitř počítače plný přístup k paměti, displeji, síti a vstupním zařízením vašeho počítače. Spouští kód napsaný společností Intel a společnost Intel neposkytla dostatek informací o svém vnitřním fungování. Tento software, nazývaný také Intel ME, se objevil ve zprávách kvůli bezpečnostním otvům Intel oznámil 20.

How to shut down and restart your synology nas manually and automatically

Der er mere end en måde at lukke ned og genstarte din Synology NAS, herunder fysisk interaktion med NAS, software og planlagte arrangementer. Lad os se på alle tre metoder nu.

Typisk fungerer din Synology NAS mere som et netværk af netværkshardware (som din router) og mindre som en computer, så oftere end ikke-ligesom din router-du lader det hænge sammen i baggrunden gør NAS-ting (arkivering dine filer, automatisering af dine downloads, og så videre). I den sjældne anledning skal du genstarte din NAS, men du skal lave lidt poking, fordi metoder til at lukke eller genstarte din NAS, i modsætning til et desktop-system, er (forsætligt) ikke foran og center.

Sådan fysisk lukker din Synology NAS

Den første metode er både den mest intuitive og mindst intuitive metode på én gang: tænd / sluk-knappen. På den ene side er det intuitivt, fordi det er en tænd / sluk-knap. Det er hvad strømknapper gør; de tænder og slukker ting. På den anden side, hvis du er en veteran computer bruger, vil du cringe på ideen om at slukke din NAS med tænd / sluk-knappen, fordi i PC-verden, at trykke og holde tænd / sluk-knappen er den fysiske genvej til en hård magt Nulstil.

How to shut down and restart your synology nas manually and automatically

På din Synology NAS udløses der dog ikke en hard reset ved at trykke på og holde tænd / sluk-knappen på enheden ved at skære strømmen. I stedet, hvis du trykker og holder knappen nede, indtil du hører en biplyd, lukker din NAS graciøst ned med operativsystemet, der håndterer afbrydelsessekvensen som om du havde initieret kommandoen via softwaregrænsefladen. For at genstarte din NAS, skal du blot trykke på tænd / sluk-knappen igen.

Sådan lukkes og genstartes via DiskManager

Hvis du vil lukke eller genstarte din Synology NAS via det webbaserede interface, skal du logge ind og se på ikonerne i øverste højre hjørne. Klik på menuen med indstillinger, der er angivet med ikonet for lille hoved og skuldre.

How to shut down and restart your synology nas manually and automatically

Derfra kan du vælge enten “Restart” eller “Shutdown” for at udføre den ønskede opgave. Hvis du genstarter, skal du vente et øjeblik eller to for at genvinde adgangen til webgrænsefladen. Hvis du lukker, skal du fysisk besøge NAS og trykke på tænd / sluk-knappen for at få adgang til enheden igen.

Sådan planlægger du nedlukninger og startups

Hvis du vil automatisk planlægge, når din NAS lukker ned og starter op, kan du gøre det ved hjælp af power scheduling-funktionen. Før vi dykker ind i, hvordan du planlægger dine nedlukninger og startups, er der dog en stor ting værd at bemærke. Hvis der er nogen planlagte opgaver (f.eks. Planlagt backup) eller en kritisk systemfunktion (sådanne diskreparationer eller operativsystemopdateringer), overskrides de planlagte strømtilstande. For at undgå frustration og mislykkede konfigurationer skal du enten ændre dine allerede eksisterende planlagte opgaver (hvis nogen) eller planlægge din strømplan omkring dem.

For at få adgang til strømplanlæggeren skal du klikke på menuknappen i det webbaserede interface og derefter vælge “Kontrolpanel”.

How to shut down and restart your synology nas manually and automatically

Hvis du ikke allerede har den avancerede visning åben i dit Kontrolpanel, skal du klikke på “Avanceret tilstand” øverst til højre.

Vælg “Hardware & Power” fra “System” i dit Kontrolpanel.

How to shut down and restart your synology nas manually and automatically

Inden i Hardware & Power menuen, vælg fanen “Power Schedule”, og klik derefter på “Create” knappen for at oprette din første strømstyringsregel.

How to shut down and restart your synology nas manually and automatically

Planlægningssystemet er enkelt og ligetil. Hver regel er enten en “Start” eller “Shutdown” regel med en dag og time indikator.

How to shut down and restart your synology nas manually and automatically

Lad os sige, for eksempel, at vi kun vil have vores NAS aktiv i et par timer om morgenen om søndagen og onsdagen (det vil sige, når alle vores teoretiske computere er planlagt til at sikkerhedskopiere det). For at oprette en sådan regel, vil vi først oprette en “Startup” regel for at angive, hvornår vi vil have NAS til at tænde. Klik på rullemenuen “Dato”, og afkryds de dage, du vil starte, selvom der opstår, og vælg derefter tidspunktet på dagen med menuen “Tid”. Tidsmenuen bruger 24-timers tid.

How to shut down and restart your synology nas manually and automatically

Gentag denne proces for “Shutdown” gange, vælg en dato og klokkeslæt, der svarer til dine behov. Når du har oprettet reglerne, kan du se dem på fanebladet “Power Schedule”, som vist nedenfor. Vi har vores NAS konfigureret til at starte kl. 01:00 søndag og onsdag og lukke klokken 6:00 på de samme dage. Når du er tilfreds med reglerne, skal du klikke på “Gem” knappen.

How to shut down and restart your synology nas manually and automatically

Du kan når som helst vende tilbage til menuen Power Schedule og deaktivere (ved at fjerne markeringen) eller slette helt (via knappen “Slet”) de strømstyringsregler, du har oprettet. Hvis du heller gør det, skal du sørge for at deaktivere eller slette companion-reglen, så du ikke ender i en situation, hvor der er en shutdown-regel uden companion opstartsregel.

My Synology DS218+ runs with a single SSD disk that has an operating temperature range of 0–70 °C, which is common for SSDs. Synology, however, has a default shutdown temperature of 61 °C, probably due to HDDs and some lazy programming.

I’m a very light user of NAS – all I want is a network attached storage and silence. My DS218+ has one 2 TB SSD disk in it and I’ve changed the system fan for a quieter / slower one.

Everything runs fine but about once in a month, I get this notification:

[Synology DS218+]Synology shut down due to disk overheating.

Synology shut down automatically, because disk 1 was overheating and reached a temperature of 61°C.

That’s really annoying as I have to attend the NAS and turn it on manually. BTW, it happens during longer I/O workloads where my disk usually operates between 58 and 60 °C, so very close to the shutdown threshold; a warmer day is enough to trigger it.

I’ve contacted Synology support to see if they have any solution for it, but they don’t (except for purchasing an officially supported SSD from their compatibility list).

But it’s possible to tweak the disk station to support higher shutdown temperatures. Here is how to do it (I wrote this for my specific user account, host name etc.):

1. Enable SSH, log in

  1. Log in to http://synology.local:5000/.
  2. In Control Center > Terminal & SNMP, tick Enable SSH service.
  3. Make sure the user is in the administrators group.
  4. From a local computer, log in with ssh [email protected] and provide the password.

2. Update the scemd.xml file

I’m not that comfortable with vi / vim so I’ve copied the file to the local machine:

In the XML file, the first two sections marked DUAL_MODE_HIGH and DUAL_MODE_LOW are important:

  • DUAL_MODE_HIGH is for the “cool mode” (i.e., when Synology keeps things cooler at the expense of noise)
  • DUAL_MODE_LOW = “quiet mode”

I’ve updated the “low mode” only, like this:

My disk operates at around 45–50 °C normally (it can be seen in the Storage Manager) so I’ve only messed with temperatures above that. Full fan speed kicks in at 66 °C and the system shuts down at 71 °C.

With the file done, save it back to Synology – first upload it to some writable directory like

There are actually five ways to reset your QNAP NAS running QTS 5.0, including soft and hard resets. The soft reset will only change your account and network settings while the hard reset will wipe all the drives, allowing you to start fresh much like Windows 11.

How to reset your QNAP NAS

Reset button

There are two ways to use the reset button to change some settings on your QNAP NAS. The first soft reset only clears the network settings and resets the admin password to the MAC address of the enclosure.

Press and hold down on the reset button for approximately three seconds until a beep sounds.

alt=”QNAP TS-431X3″ width=”800″ height=”535″ />Source: Rich Edmonds / Windows Central

Once the NAS has been reset, the following takes place:

  • TCP/IP configuration: Obtain IP address settings automatically via DHCP.
  • TCP/IP configuration: Disable Jumbo Frame.
  • TCP/IP configuration: If port trunking is enabled (dual LAN models only), the port trunking mode will be reset to “Active Backup (Failover)”.
  • System port: 8080 (system service port).
  • Security level: Low (Allow all connections).
  • VLAN will be disabled
  • Service binding: All NAS services run on all available network interfaces.

Should you want to clear users, groups, and shared folders as well as the above, you’ll want to perform the same soft reset process, but hold the button for longer.

  1. Press and hold down on the reset button for approximately 10 seconds. (You’ll hear beeps at three and 10 seconds.)
  2. Re-connect to the NAS using your browser.
  3. Enter username “admin.”
  4. The new password is the first MAC address (found on the NAS sticker under “MAC1”) .

No data will be lost performing the above two reset processes.

QNAP QTS

There are three further ways to reset your NAS using the QTS OS. The first is “Reset Settings” where no data will be deleted. The second is “Restore Factory Defaults & Format All Volumes,” which essentially clears the NAS and resets everything to defaults. Finally, there’s “Reinitialize NAS” that will clear everything and allow you to reinstall the OS.

  1. Log into your QNAP NAS.
  2. Go to Control Panel > Backup / Restore > Restore to Factory Default.

Select from the following:

  • Reset Settings
  • Restore Factory Defaults & Format All Volumes (hard reset)
  • Reinitialize NAS (hard reset)

Click OK.

How to pick the best hard drives for your NAS

How to shut down and restart your synology nas manually and automatically

Working on your NAS enclosure and need some additional drives? We’ve rounded up some excellent NAS-class drives, including Seagate IronWolf and Western Digital Red. We’d recommend having at least two drives installed on an enclosure with more than a single drive bay, which allows for the creation of a RAID array for enhanced data redundancy.

Best QNAP NAS

How to shut down and restart your synology nas manually and automatically

QNAP TS-451D2

If you’re looking for the best value NAS from QNAP, look no further than the TS-451D2. It has four drive bays, an Intel processor, and everything you need to set up your very first home NAS.

We may earn a commission for purchases using our links. Learn more.

How to shut down and restart your synology nas manually and automatically

Buy these hard drives for your Synology DiskStation DS920+

Looking for the best hard drives (and SSDs) for your Synology NAS? We’ve got you covered with this comprehensive list of only the best storage media for your DiskStation DS920+.

How to shut down and restart your synology nas manually and automatically

Install these hard drives inside your Synology DiskStation DS220+ NAS

To get the most out of your new Synology DiskStation DS220+ NAS, you’ll need some hard drives. Whether you want HDDs or SSDs, we’ve rounded up the best options for storage right here.

How to shut down and restart your synology nas manually and automatically

Rechargeable mice are eco-friendly and convenient. These are our favorites.

A rechargeable mouse will take the worry out of having your wireless mouse die at the most inopportune moment: the moment you run out of fresh batteries. Charge up your mouse and get to work.

How to shut down and restart your synology nas manually and automatically

Có nhiều cách để tắt và khởi động lại NAS Synology của bạn, bao gồm tương tác vật lý với NAS, phần mềm và các sự kiện theo lịch trình. Bây giờ chúng ta hãy xem xét cả ba phương pháp.

Thông thường, Synology NAS của bạn hoạt động giống như một phần cứng mạng (như bộ định tuyến của bạn) và ít giống máy tính hơn, thường xuyên hơn – không giống như bộ định tuyến của bạn – bạn sẽ để nó ở chế độ nền làm công cụ NAS (lưu trữ tập tin của bạn, tự động tải xuống của bạn, vv). Tuy nhiên, trong trường hợp hiếm hoi, bạn cần khởi động lại NAS của mình, tuy nhiên, bạn sẽ cần thực hiện một chút chọc ngoáy bởi vì, không giống như một hệ thống máy tính để bàn, các phương pháp để tắt hoặc khởi động lại NAS của bạn (không cố ý) ở phía trước và trung tâm.

Cách tắt vật lý NAS Synology của bạn

Phương pháp đầu tiên là cả phương pháp trực quan nhất và ít trực quan nhất cùng một lúc: nút nguồn. Một mặt, nó trực quan bởi vì, tốt, đó là một nút nguồn. Đó là những gì các nút nguồn làm; họ bật và tắt mọi thứ. Mặt khác, nếu bạn là người dùng máy tính kỳ cựu, bạn sẽ chùn bước với ý tưởng tắt NAS bằng nút nguồn vì trong thế giới PC, nhấn và giữ nút nguồn là phím tắt vật lý cho nguồn điện cứng cài lại.

How to shut down and restart your synology nas manually and automatically

Tuy nhiên, trên NAS Synology của bạn, nhấn và giữ nút nguồn trên thiết bị sẽ không kích hoạt thiết lập lại cứng bằng cách cắt nguồn. Thay vào đó, nếu bạn nhấn và giữ nút cho đến khi bạn nghe thấy tiếng bíp, NAS của bạn sẽ tắt một cách duyên dáng với hệ điều hành xử lý chuỗi tắt máy như thể bạn đã thực hiện lệnh thông qua giao diện phần mềm. Để khởi động lại NAS của bạn, chỉ cần nhấn lại nút nguồn.

Cách tắt máy và khởi động lại thông qua DiskManager

Nếu bạn muốn tắt hoặc khởi động lại NAS Synology thông qua giao diện dựa trên web, bạn sẽ cần phải đăng nhập và tìm đến các biểu tượng ở góc trên bên phải. Nhấp vào menu tùy chọn, được biểu thị bằng biểu tượng ngực nhỏ ở đầu và vai.

How to shut down and restart your synology nas manually and automatically

Từ đó, bạn có thể chọn một trong những phần mềm khởi động lại hay còn gọi là Tắt máy để thực hiện nhiệm vụ mong muốn. Nếu bạn khởi động lại, bạn sẽ cần đợi một hoặc hai phút để lấy lại quyền truy cập vào giao diện web. Nếu bạn tắt máy, bạn sẽ cần truy cập vật lý vào NAS và nhấn nút nguồn để có quyền truy cập lại vào thiết bị.

Cách lên lịch tắt máy và khởi động

Nếu bạn muốn tự động lên lịch khi NAS của bạn tắt và khởi động, bạn có thể sử dụng tính năng lập lịch trình điện. Tuy nhiên, trước khi chúng tôi đi sâu vào cách lên lịch tắt máy và khởi động, có một điều đáng chú ý. Nếu có bất kỳ tác vụ theo lịch trình nào (như sao lưu theo lịch trình) hoặc chức năng hệ thống quan trọng (như sửa chữa đĩa hoặc cập nhật hệ điều hành), thì trạng thái năng lượng theo lịch trình sẽ bị ghi đè. Để tránh sự thất vọng và cấu hình không thành công, hãy thay đổi các tác vụ theo lịch trình đã có (nếu có) hoặc lập kế hoạch lịch trình sức mạnh của bạn xung quanh chúng.

Để truy cập bộ lập lịch nguồn, nhấp vào nút menu trong giao diện dựa trên web, sau đó chọn tùy chọn Bảng điều khiển điều khiển.

How to shut down and restart your synology nas manually and automatically

Nếu bạn chưa mở chế độ xem nâng cao trong Bảng điều khiển, hãy nhấp vào Chế độ nâng cao Chế độ nâng cao ở góc trên bên phải.

How to shut down and restart your synology nas manually and automatically

Chọn Phần cứng & Sức mạnh của Phần cứng trong phần Phần mềm Hệ thống trên Bảng điều khiển của bạn.

How to shut down and restart your synology nas manually and automatically

Trong menu Phần cứng & Nguồn, chọn tab Lịch biểu Power Power, và sau đó nhấp vào nút Tạo Tạo ra để tạo quy tắc quản lý năng lượng đầu tiên của bạn.

How to shut down and restart your synology nas manually and automatically

Hệ thống lập kế hoạch rất đơn giản và dễ hiểu. Mỗi quy tắc là một quy tắc Startup Startup hoặc hoặc Shutdown với một chỉ báo ngày và giờ.

How to shut down and restart your synology nas manually and automatically

Ví dụ, giả sử rằng chúng tôi chỉ muốn NAS hoạt động trong vài giờ vào sáng sớm Chủ nhật và thứ Tư (đó là khi tất cả các máy tính lý thuyết của chúng tôi được lên lịch để sao lưu). Để tạo quy tắc như vậy, trước tiên, chúng tôi sẽ tạo quy tắc Khởi động trước khi khởi động để cho biết khi nào chúng tôi muốn NAS bật. Nhấp vào trình đơn thả xuống Lựa chọn Ngày hẹn hò và kiểm tra những ngày bạn muốn khởi động thậm chí xảy ra và sau đó chọn thời gian trong ngày bằng cách sử dụng các menu Thời gian Cảnh sát. Menu thời gian sử dụng thời gian 24 giờ.

How to shut down and restart your synology nas manually and automatically

Lặp lại quy trình này cho các lần Tắt máy của Thời gian ngắn, chọn ngày và giờ tương ứng với nhu cầu của bạn. Khi bạn đã tạo các quy tắc, bạn sẽ thấy các quy tắc này trên tab Lịch biểu Power Power của trực tuyến, như được thấy bên dưới. Chúng tôi có cấu hình NAS của chúng tôi để bắt đầu lúc 1:00 AM vào Chủ nhật và Thứ tư và tắt vào lúc 6:00 AM cùng ngày. Khi bạn hài lòng với các quy tắc, nhấp vào nút Lưu Save ‘.

How to shut down and restart your synology nas manually and automatically

Bất cứ lúc nào, bạn có thể quay lại menu Lịch trình điện và vô hiệu hóa (bằng cách bỏ chọn) hoặc xóa hoàn toàn (thông qua nút Xóa Xóa Xóa) các quy tắc quản lý năng lượng bạn đã tạo. Nếu bạn làm như vậy, hãy chắc chắn vô hiệu hóa hoặc xóa quy tắc đồng hành để bạn không gặp phải tình huống có quy tắc tắt máy không có quy tắc khởi động đồng hành.