Harry Guinness is a photography expert and writer with nearly a decade of experience. His work has been published in newspapers like The New York Times and on a variety of other websites, from Lifehacker to Popular Science and Medium’s OneZero. Read more.
Burst mode is a great way to guarantee you get any action shot—but, as of iOS 14, it’s slightly hidden on the iPhone XS, iPhone XR, and newer devices. Here’s how to use it on a modern iPhone.
Taking Photos and Videos With QuickTake
QuickTake is a new feature that makes it easier to capture short videos while you shoot photos on your iPhone. It makes the camera app work more like the built-in cameras in apps like Instagram and Snapchat.
To capture a short video, hold down the “Shutter” button. When you release it, the recording will stop. If you want to record a longer video, hold down the “Shutter” button and drag it to the padlock on the right. This will lock the recording until you tap the “Stop Recording” button. You can keep taking photos by tapping the “Shutter” button even as you record.
If you’ve used an iPhone for a while, you might notice this is how you used to shoot bursts. Now, to shoot a burst of photos, hold the “Shutter” button and drag it to the left. Your iPhone will keep shooting until you release it.
You have to drag the shutter quite quickly; pause too long and your iPhone will start recording video.
If, like me, you like shooting in burst mode, it takes a little bit of getting used to. But there’s a better way.
Set Volume Up to Burst Mode
The volume buttons on your iPhone double as a shutter release and work with QuickTake. Tap “Volume Up” or “Volume Down” to take a photo, hold them down to shoot a short video.
However, you can configure your iPhone so that holding “Volume Up” instead shoots a burst of photos, while holding “Volume Down” still shoots video. It’s a great way to have total control of your camera.
To enable it, go to Settings > Camera, and enable “Use Volume Up For Burst.”
Selecting Photos from a Burst
Not every photo you shoot in a burst will be good. In fact, you probably only want to keep one or two. Your iPhone will automatically select what it thinks is the best photo but you should still go through them yourself.
To sort photos from a burst, open the Camera Roll. Bursts appear as a little stack of photos, although it’s quite hard to see. Tap in and you’ll also see “Burst (X photos)” in the top left.
Tap “Select,” and swipe through the collected photos tapping each one you want to keep. Then tap “Done.” You have the option to either “Keep Everything” or “Keep Only X Favorites.”
Choose the option that best applies. In either case, the photos you selected will be pulled from the burst and appear as individual photos in your Camera Roll ready to be edited, shared, or ignored forever.
(Confusingly, they don’t get added to your Favorites album. To do that, you’ll need to re-favorite them by tapping the Heart icon.)
- › How to Add Images to Questions in Google Forms
- › How to Delete Your Photos on Facebook
- › Razer Thinks You Want a PC Gaming Headset That Vibrates
- › How to Get a Link to a Photo or Video on Instagram
- › The Fix for Slow AMD Processors on Windows 11 Is Here
Harry Guinness is a photography expert and writer with nearly a decade of experience. His work has been published in newspapers like The New York Times and on a variety of other websites, from Lifehacker to Popular Science and Medium’s OneZero.
Read Full Bio »
alt=”photos icon” width=”250″ height=”250″ />Burst Mode refers to when the camera on your iOS device captures a series of photos in rapid succession, at a rate of ten frames per second. It’s a great way to shoot an action scene or an unexpected event, since you’re always more likely to end up with the picture you were aiming for.
For instance, the picture below was taken when the sun came out momentarily from behind the clouds to throw light on the beautiful yellow ocher leaves of a tree. Burst Mode made it possible to shoot the whole event and then save out the one shot that captured the tree at its most vivid during its brief illumination.
To take a photo in Burst Mode, launch the Camera app from the Lock Screen – if your device is unlocked, select the Camera app from the Home screen or slide the Control Center into view and launch it from there. Once you have a shot in frame, tap and hold the shutter button at the bottom of the Camera interface for the duration of the scene that you’re trying to capture.
alt=”IMG 2349″ width=”800″ height=”659″ />
Notice the counter increase at the bottom of the frame for as long as you hold down the shutter. This indicates how many shots are being captured in the current burst. Simply take your finger off the shutter when you want to end the burst of shots.
When you take a series of burst photos, they automatically appear in the Photo app under the Album name Bursts. You’ll also find them in your main Photo Library as well as the Moments section found in the Photos tab. Here’s how to view your burst photos and pick out the best images from them for safe keeping.
How to View Burst Photos
- Launch the Photos app.
- Tap a collection of burst photos – they appear in the Photos Library as a single picture, but if you look closely, you’ll see more images stacked underneath the top thumbnail image.
alt=”taking burst photos 1″ width=”800″ height=”238″ />
alt=”taking burst photos 2″ width=”800″ height=”863″ />
Any dots you see below images in a burst indicate that Apple’s algorithms think they have the best focus and detail in the set, but of course you may think differently.
If you are wondering how to turn off bursts on iPhone, then you have probably discovered that your camera is taking multiple copies of every picture, which is quickly filling up your device and iCloud storage. Since it’s so easy to take pictures on the iPhone you could have a lot of separate images, and that number might be multiplied by up to ten with the inclusion of the burst images.
Fortunately, if you are asking the question “how do I turn off burst mode” then you can explore a handful of different options that should allow you to stop creating so many images.
Your iPhone’s Camera has a number of different modes that you can select from by swiping the mode carousel to the left or right when the app is open. But there’s another, somewhat hidden mode, that you can use to quickly take a rapid series of still photos.
This mode is activated by holding down the Shutter button in Photo mode, which will take a number of Burst Photos in quick succession. All of these pictures are saved to your Camera Roll, thereby allowing you to pick the best ones to share with your friends and family. Unfortunately, these pictures can take up a lot of space and might be crowding your Photo Stream. Our guide below will show you a setting to change that will stop automatically uploading all of your burst photos.
How to Turn Off Burst iPhone Camera Setting
If you are mainly getting burst photos when you use the timer and you no longer wish to use the timer, then you can turn it off with the following steps.
- Open the Camera app.
- Tap the timer icon.
- Choose the Off option.
Our article continues below with additional information on how to turn off the iPhone Camera burst option.
How to Turn Off Burst Photos with Volume Up on an iPhone
One way that you can take a lot of pictures quickly is by pressing the Volume Up button on the side of your iPhone to take pictures. But if you want to use that button without taking those burst photos, you can use these steps.
- Open Settings.
- Choose Camera.
- Turn off Use Volume Up for Burst.
How to Stop Uploading Burst Photos in iOS 10 (Guide with Pictures)
The steps in this article were performed on an iPhone 7 Plus in iOS 10.3.3. By following the steps in this tutorial you will be turning off a setting that causes all of your Burst photos to upload to your Photo Stream. Once you turn off this setting only Burst photos that you have marked as favorites will be sent to the Photo Stream.
Step 1: Open the Settings app.
Step 2: Scroll down and select the Photos & Camera option.
Step 3: Tap the button to the right of Upload Burst Photos to turn it off.
If all of the pictures on your iPhone are contributing to the device being nearly full, then you might be looking for ways that you can free up some space for new apps and files. This guide will show you several options that you can employ which can help to free up some of that space.
More Information on How to Turn Off Burst Photos on iPhone 7
While it can be beneficial to use the burst mode when you are taking pictures, you may not like the number of pictures that it adds to your camera roll or the amount of space that these pictures take up when you are uploading your photos to iCloud. This is one of the main reasons that I usually avoid using burst photos at all.
One final method that you can explore is enabling HDR mode in the camera. This will cause the camera to take photographs in a different manner, which it won’t be able to do with burst photos, so it disables them. You can enable HDR by opening the Camera app, then tapping the HDR button at the top of the screen.
If you don’t see an HDR button then there you can go to Settings > Camera and disable the Smart HDR option at the bottom of the menu.
The Camera app interface can vary depending on the version of iOS that is installed on your iPhone. If you don’t see all of the different options when taking a photo then you can swipe up from the mode selector row to see all of the picture options.
Kermit Matthews is a freelance writer based in Philadelphia, Pennsylvania with more than a decade of experience writing technology guides. He has a Bachelor’s and Master’s degree in Computer Science and has spent much of his professional career in IT management.
He specializes in writing content about iPhones, Android devices, Microsoft Office and many other popular applications and devices.
Burst Photo mode is one of the best features in an iPhone that allows you to take multiple shots in rapid succession. You can take photos at a rate of 10 frames per second.
For instance, if you want to capture a rare or unexpected event, you can take multiple photos to get the best shot you were aiming for. All the pictures taken will be grouped together behind one photo.
However, after taking the burst photos, many iPhone users wonder how to them.
If you are one among them, you can check this guide which explains how to view burst photos on iPhone.
Option #1. How to View Burst Photos on iPhone Directly
After taking a series of photos using Burst mode of the Camera app, you can view single photos directly in your iPhone. Follow the steps given below to view the burst photos.
Step 1. On your iPhone, open Photos app.
Step 2. Tap on Albums tab that is on the top right corner.
Step 3. Scroll down and find Bursts album. (If there is no Bursts album, there are no pictures taken using the Burst mode).
Step 4. Open Bursts album. You can view all the pictures taken using Burst mode.
Step 5. Now tap “Select” tab at the bottom and see all the burst photos of that individual picture by swiping left or right.
Tip: How to Save Individual Images in Burst Photos
If you need, you can check the following steps to save individual photos of any Burst picture.
Step 1. Open Photos app on your device and tap Bursts album.
Step 2. Open the Burst photo and tap Select on the bottom.
Step 3. Select the images of Burst that you want to save.
Step 4. Tap “Done” that is in the top right corner.
Step 5. If you want to keep all the photos in the burst series, tap “Keep Everything”.
Step 6. If you want to keep only the chosen images, tap “Keep Only Favourites”.
Option #2. How to View Burst Photos on iPhone via Software
Taking pictures is very simple on the iPhone and it is easy to capture the memorable moments. The Burst mode of Camera App allows you to take a series of pictures so that you get the best shot.
Here you can use reliable software to view all the burst photos on iPhone in the series all at once.
iMyFone D-Back is one of the advanced tools that allows you to view burst photos on iPhone. This popular software is basically a data recovery tool, which can easily recover and export the lost or deleted photos from your device.
- It supports all the iPhone models and is compatible with all the iOS versions.
- You can recover most of the file types using this trusted software. The software does not compromise the privacy of the users and recovers the lost or deleted files within a few minutes.
- There are multiple methods in D-Back with which you can view the burst photos of your iPhone.
Steps to View Burst Photos from iPhone (including existing & deleted ones)
You can view and save all the burst photos from iPhone. In addition, you can also rely on it even if you need the deleted burst photos when there are no iTunes or iCloud backups available.
Step 1. Open iMyFone D-Back on your computer. Click on “Recover from iOS Device” and click “Start”. Connect your iPhone to the computer using a USB cable. The D-Back software will automatically detect your device. Click “Next”.
Step 2. All the file types will be displayed on the screen. Select “Photo” under “Photo & Video” and click “Scan”.
Step 3. When the scan is completed, all the photos will be shown. You can also see all the photos taken using the Burst mode. You can select the burst photos that you want to save and tap “Recover”.
Steps to View Burst Photos from iTunes Backup
Due to the limitation of iTunes, you can use D-Back to check iTunes backup of your device and view the burst photos.
Step 1. Run iMyFone D-Back on your computer. Click on “Recover from iTunes Backup” and click “Start”. All available iTunes backup will be shown. Choose the most relevant one and click “Next”.
Step 2. All the file types will be displayed. Select “Photo” under “Photo & Video” from the options shown and click “Scan”.
Step 3. When the scan is completed, all the photos will be shown. You can select the burst photos that you want to save and click “Recover”. When the recovery process is over, all the selected burst photos will get stored on your computer.
Steps to View Burst Photos from iCloud Backup
If your photos are saved to iCloud, you can also use the iCloud backup of your device to view and save the burst photos via D-Back.
Step 1. Launch D-Back on your computer. Click on “Recover from iCloud Backup” and click “Start”. Sign in to your iCloud account using the Apple ID and password.
Step 2. All available iCloud backups will be shown. Choose the most relevant one and click “Next”.
Step 3. Select “Photo” under “Photo & Video” from the options shown and click “Scan”.
Step 4. When the scan is completed, all the photos will be shown. Choose the burst photos you need and hit “Recover”. Select or create a new folder to store the burst photos.
Why Choose D-Back?
iMyFone D-Back is an affordable and specialized software which has been trusted by many professional websites. It has helped millions of people all over the world. This is the reason it is trusted by most users.
If you want to know how to view burst photos on iPhone, do not hesitate to check this guide now. You can try all the methods given in this guide to solve your problem. Let us know which method works for you by leaving your comments below.
And iPhone X Users Can see the Clock icon at the top strip, then Select Off Burst mode.
Disable Burst Mode (Series of Pictures) Using HDR
HDR in a term – High Dynamic Range is an inbuilt camera feature that is useful to take good quality pictures in low-light circumstances. For example, when you take pictures with enabled HDR then you get three photos at the same time and three different exposures. After this, your Apple Phone automatically stitches these photographs into one.
Therefore, using HDR photography your iDevice will save the original shot and the HDR photo Copy. This HDR mode disables the burst mode feature because HED leaving you with two copies of your pictures. By the way, after picking your Pic, you will also get an option to choose if the HDR or standard photograph is your most favorite one.
- Se how to enable HDR is simple:
- Step #1- Launch the Camera App on your iPhone.
- Step #2- Now on the top of the screen tap the HDR button.
- Step #3- Tap ON from the Slide-out Menu.
Now Learn how to disable burst mode on your iPhone using Flashlight
Use a camera with flash will turn off burst mode. Hmm, Open Flash for the camera not only to add brightness but it stops burst mode.
- #1- Open the Camera App on your iPhone via Control Center/ Lock screen or Home Screen.
- #2- Look top bar in Camera App and tap the Flash.
- #3- Tap On from the Slide-out menu.
The final Way is to turn off Burst mode on iPhone X/iPhone 8 Plus using Camera Timer
- Open the Camera App.
- Tap the Timer on the top menu bar.
- Tap 3s or 10s from the slide-out menu. These settings will give you a three-second and ten-second shutter delay respectively.
So these all are the option to disable burst mode on your iPhone camera.
Do you have any issue turning off burst mode on the iPhone? Let me know in the comments.
Jaysukh Patel is the founder of howtoisolve. Also self Professional Developer, Techno lover mainly for iPhone, iPad, iPod Touch and iOS, Jaysukh is one of responsible person in his family. Contact On: [email protected] [OR] [email protected]
Apple changed how burst mode works with the iPhone 11 cameras in iOS 13 that made things a bit more complicated. With iOS 14, there’s a new option to make things simpler and faster to access the feature. Follow along for how to use burst mode with the iPhone volume button.
iOS 13 brought a host of new camera features along with the new camera hardware with the iPhone 11 lineup. However, as Apple figured out how to implement all the new features, the very well-known press and hold of the on-screen shutter button or one of the physical volume buttons for burst mode was gone as the QuickTake video feature replaced those methods.
Now with iOS 14, Apple has brought back an option to enable the iPhone volume up button to act as a Burst Mode shutter button.
How to use burst mode with iPhone volume button iOS 14
- On your iPhone, head to the Settings app
- Swipe down and tap Camera
- Now tap the toggle next to Use Volume Up for Burst
Here’s how the steps look:
Now when you open the Camera app, you can immediately grab burst mode photos with the volume up button instead of having to tap and drag the on-screen shutter button or accidentally activating the QuickTake video feature.
Read more 9to5Mac tutorials:
FTC: We use income earning auto affiliate links. More.
Making the switch to an iPhone seriously increased the amount of photos I take. With the iPhone 11 and 11 Pro, taking burst images is done differently than on older models. Let’s go over how to take Burst Photos on all compatible models of the iPhone, how to look at burst images, and how to choose and save the individual iPhone burst images you want to keep. Whether you’re looking to take flattering candid pictures, better your sports photography, or improve your action shots of fast-moving pets, I see some great pictures in your future; let’s get started!
What is Burst Mode? Burst Mode on the iPhone is a sequence of photos taken at a rate of ten frames per second. There’s no need to turn on Burst mode; the feature is always ready to go. Burst Mode allows you to capture action shots at a moment’s notice. Taking a burst photo on the iPhone is a great way to guarantee you get the motion photograph you want. If you stumble across a great candid photo opportunity or other once-in-a-lifetime shot and want to be certain you have plenty of images to choose from, Burst Mode is the way to do it. Once you take a photo in Burst Mode on the iPhone, all the pictures are shown together as one photo in the Photos app.
What’s in this article:
How to Take Burst Photos
With the iPhone 11 and 11 Pro, taking burst photos has changed. For earlier models, you’ll still follow the earlier method of long pressing the shutter button.
To take a Burst photo on the iPhone 11 or 11 Pro:
- Open your Cameraapp.
- First, frame your shot.
- Next, slide the shutter button to the left towards towards the thumbnail of the last shot you took.
- You’ll see the a counter appear in place of the shutter button, indicating how many shots you’ve taken in your current burst image.
To Use Burst Mode on an iPhone XS and earlier:
- Open your Camera app.
- First, frame your shot.
- Next, tap and hold on the shutter button at the bottom of the screen.
- You’ll notice a counter pop up as you hold down the shutter. This indicates how many images you’ve taken so far.
How to Look at Burst Images
- Open the Photos app and locate the cluster of burst photos.
- Tap Select at the bottom of the screen.
- Here you can swipe through and view all the burst photos you just took.
How to Save Individual Burst Photos
- In the Photos app, locate the cluster of burst photos you want to open.
- Tap Select.
- Here you can swipe through all the burst photos you just took.
Top Image Credit: Denys Prykhodov / Shutterstock.com
Rheanne Taylor is the Senior Video Producer of iPhone Life. Before discovering her love for video production, Rheanne was the Managing Editor. In her 6+ years at the company, Rheanne has helped produce 19 issues of iPhone Life magazine, edited countless podcasts, and produced over 1,000 educational videos showing people how to get the most out of their Apple devices. She continues to be a regular contributor to iPhone Life magazine, using her 10+ years of photography experience to create content primarily covering photography tips and photography gear. Rheanne is a passionate photographer both in and outside of work and loves to remind people that they don't need a fancy camera in order to capture beautiful shots—her most recent photography show featured work mainly shot on an iPhone!
Rheanne holds a bachelor's degree in Literature & Writing from Maharishi International University. When she isn't overseeing video content, she loves drinking tea, holding up traffic by taking entirely too many photos of bugs, and hanging out with her Instagram famous cat Wesley (IG: wesley_the_pirate_cat).
iPhone 12 just like other iPhone models features Burst mode, which enables you to take multiple shots in less than a second. The upgraded camera on the newer iPhone models brings some awesome features that will enhance your photography experience. However to use burst mode on iPhone 12 you have to follow different steps than on older models. And even if you are not a pro, you can still take breathtaking photos with your device.
Its impressive night mode, ultra-wide lens, and burst mode are the legit compelling reasons to upgrade to iPhone 12. Yes, we said ‘Burst Mode’! if you have not used it yet, probably this is time to start using it. Remember, a simple press and hold action does not activate the burst mode in your new iPhone 12.
How To Use Burst Mode On iPhone 12
So, here is a step-by-step guide to using Burst Mode on iPhone 12, iPhone 12 Pro, iPhone 11, iPhone 11 Pro and more.
In order to use this feature, follow the steps below:
- Tap on the shutter button and then drag it to the Left side immediately for portrait display.
- When taking photos in the landscape mode, tap on the shutter button and then drag it immediately towards the Up direction.
- Release the button when you have taken photos.
- And you are done.
Make sure your motion of moving the shutter button is smooth. The burst mode appears in the middle of the shutter button and lets you know the number of burst shots being taken.
In case you don’t quickly move the shutter button up after pressing it, you will activate the QuickTake mode.
If you need to capture a still image of some high-speed action, Burst mode is the way to go. Burst shots take photos in rapid succession, providing a range of pictures to choose from and ensuring that at least one great shot comes out of it. You might notice, however, that your new second-generation iPhone SE doesn’t seem to sport Burst mode as your old iPhone did. Is it gone? Not at all.
To begin, we need to take a look back to 2019. One of Apple’s big Camera app updates last year was “QuickTake,” which added the ability to quickly take a video in Photo mode by simply holding down the shutter button. Apple added QuickTake to the 2020 iPhone SE, the only iOS device with a Home button to sport the feature. Of course, Burst mode used that same long-press function, so at first glance, it seems to be gone for good. Instead, Apple slightly changed how you activate it.
- More Info: Shoot Video Faster with Photo Mode’s QuickTake Camera
To use Burst mode on your iPhone SE (2nd generation), as well as on the iPhone 11, 11 Pro, and 11 Pro Max, swipe left on the shutter button and hold. Once you do, your iPhone will start rapidly taking photos, just like it used to, complete with the upward count of photos taken so far. To exit Burst mode, just release the shutter.
You need to swipe left fast since holding down the shutter for too long engages QuickTake. You’ll end up with a video instead of your photos (although, technically, video is just a sequence of photos as well).
alt=”Burst Mode Missing on Your iPhone SE? Here's Where to Find It in the Camera App” width=”270″ height=”270″ />
Note that the number of snaps being taken is now in the shutter button’s location, whereas before, Apple placed it directly above the shutter button. So if you’re a righty, your thumb might block the number visible if you’re holding your iPhone a certain way.
Keep Your Connection Secure Without a Monthly Bill. Get a lifetime subscription to VPN Unlimited for all your devices with a one-time purchase from the new Gadget Hacks Shop, and watch Hulu or Netflix without regional restrictions, increase security when browsing on public networks, and more.