Categories
Interior

How to use windows 8’s gestures on a laptop trackpad

Brady Gavin has been immersed in technology for 15 years and has written over 150 detailed tutorials and explainers. He’s covered everything from Windows 10 registry hacks to Chrome browser tips. Brady has a diploma in Computer Science from Camosun College in Victoria, BC. Read more.

How to use windows 8’s gestures on a laptop trackpad

If you’ve used a touchpad in Windows 10, you’re no doubt aware of the basic single-finger tapping and two-finger scrolling gestures. Windows 10 also packs in some additional gestures you might not have tried.

Note: Some of these gestures only work with “Precision Touchpads,” so some of these gestures won’t work for you if you don’t have one. You can check whether your laptop has one by opening the Settings app to Settings > Devices > Touchpad.

Now, on to the gestures! Here are the gestures that Windows 10 supports:

  • Tap one finger on the touchpad: Select an item (same as left-clicking a mouse).
  • Tap two fingers on the touchpad: Show more commands (same as right-clicking a mouse).
  • Swipe up or down with two fingers: Scroll a page up or down.
  • Pinch or stretch out two fingers: Zoom in or zoom out (magnify or shrink).
  • Swipe up with three fingers: Show all recent activity and open windows via Windows Timeline.
  • Swipe down with three fingers: Minimize everything and show the desktop.
  • Swipe left or right with three fingers: Switch between all windows that are currently open (same as Alt+Tab).
  • Tap three fingers on the touchpad: Open Cortana/search.
  • Tap four fingers on the touchpad: Open Action Center.
  • Swipe left or right with four fingers: Switch between all virtual desktops.

It’s also possible that your touchpad supports additional gestures (or even the ability to create your own) through their own specialized settings app, so be sure to see if your system includes one!

Chris Hoffman is Editor-in-Chief of How-To Geek. He’s written about technology for over a decade and was a PCWorld columnist for two years. Chris has written for The New York Times, been interviewed as a technology expert on TV stations like Miami’s NBC 6, and had his work covered by news outlets like the BBC. Since 2011, Chris has written over 2,000 articles that have been read nearly one billion times—and that’s just here at How-To Geek. Read more.

How to use windows 8’s gestures on a laptop trackpad

While Windows 8 may seem a bit out of place on hardware without a touch screen, trackpad gestures can help bridge the gap. Gestures on a trackpad work similarly to gestures on a touch screen.

Instead of moving the cursor to the corners of the screen, you can swipe the trackpad to reveal hidden menus and pinch your fingers to zoom in and out.

Trackpad Drivers

Laptops that come with Windows 8 should have trackpad drivers preinstalled and working properly. If you’ve installed Windows 8 on an existing laptop, you may have to install the trackpad drivers yourself, as many people are reporting that the final version of Windows 8 doesn’t yet include these drivers.

You may be able to download the appropriate trackpad drivers for Windows 8 from your laptop manufacturer. Many people have also reported that the generic Synaptics touchpad drivers, even though they’re for Windows 7, enable gesture functionality.

Charms

To access the charms bar wherever you are in Windows, place your finger at the right side of your trackpad and swipe inwards. The charms will appear at the right side of your screen.

You can also move your mouse cursor to the top or bottom right corners of your screen and then move the cursor towards the middle of your screen or press WinKey+C to access the charms.

How to use windows 8’s gestures on a laptop trackpad

Switcher

To access the new app switcher, place your finger at the left side of the trackpad and swipe inwards. The switcher will appear on the left side of your screen.

You can also move your mouse to the top or bottom left corners of your screen and then move your cursor towards the middle of your screen or press the WinKey+Tab keyboard shortcut to use the switcher.

Note that the switcher shows the entire Desktop, including all your desktop applications, as a single thumbnail. You can still use Alt+Tab to switch between desktop apps.

How to use windows 8’s gestures on a laptop trackpad

App Bar

Swipe down from the top edge of your trackpad to access the app bar, which contains an app’s options. For example, in the “Windows 8 interface” version of Internet Explorer, the app bar contains the address bar, tab thumbnails, and navigation buttons.

You can also right-click anywhere in an app or press WinKey+Z to reveal the app bar.

How to use windows 8’s gestures on a laptop trackpad

Horizontal Scrolling

To scroll horizontally, place two fingers on the trackpad and move them from right to left or left to right. Windows 8’s new interface uses horizontal scrolling in place of vertical scrolling, so this feels a bit more natural.

You can also scroll horizontally by scrolling the mouse wheel up and down.

How to use windows 8’s gestures on a laptop trackpad

Zoom In and Out

To zoom in and out, use a pinch gesture. Place two fingers on the trackpad and move them towards each other to zoom in or move them apart to zoom out.

You can also hold the Ctrl key and scroll your mouse wheel up and down or hold down the Ctrl key and use the + and – keys to zoom in and out.

How to use windows 8’s gestures on a laptop trackpad

Rotate

You can rotate the screen by placing two fingers on the trackpad and moving them in a circle, as if you were turning a knob. This gesture may be disabled by default in your touchpad’s configuration application, so you may have to re-enable it

You can also use the trackpad to move the cursor and control Windows 8 with a mouse. However, the gestures approximate touch better – swiping in from the right feels more natural than moving the cursor to the top or bottom right corners of the screen.

If you prefer using the keyboard, Windows 8 also supports a variety of keyboard shortcuts.

How to access gestures in Windows 8 without trackpad or touchscreen

Here’s how you can use Windows 8 gestures without a trackpad or touchscreen. Start: Mouse to the bottom left corner, left click the tile. Power User Navigation: If you right click the bottom left popup instead of left clicking it, you’ll get options for a host of commands, like opening Task Manager or Control Panel, or individual settings like Power Options or Device Manager. Multitask Quick Swap: Mouse to the top left corner and left click it (You can also right click to close or snap left or right) Multitask Bar: Mouse to the top left corner, then slide your cursor down the left side of the screen. (Right click closes or snaps left or right here as well) Charms: Mouse to the top or bottom right corner. Close Live App: Click the top-center of the app and drag it to the bottom of the screen. Live App Menu: Right click anywhere in the Live app Aero Peek: Aero Peek is still here! Mouse to the bottom right corner and leave the cursor there

For more, see the original article at the link below.

This story, “Use Windows 8 gestures without touchscreen or trackpad” was originally published by ITworld .

Jim Lynch is a technology analyst and online community manager who has also written for many leading industry publications over the years, including ITworld, InfoWorld, CIO, PCMag, ExtremeTech, and numerous others.

The opinions expressed in this blog are those of Jim Lynch and do not necessarily represent those of IDG Communications, Inc., its parent, subsidiary or affiliated companies.

Last Updated on June 18, 2013 by admin Leave a Comment

Computer users who have ever used a notebook or netbook know the basics of using a trackpad or touchpad as a pointing device, but not everyone knows that Microsoft’s latest Windows 8 operating system includes a couple of new touchpad gestures as well.

Users who have used a laptop powered by Windows 7 or earlier versions of Windows know that one can use the touchpad to a left-click, right-click, double-click, move the mouse cursor, and also scroll a page. Some touchpads let you zoom-in or zoom-out as well.

With Windows 8, Microsoft has introduced hundreds of new features. Charms bar and app-switch, and app bar are the three of the hundreds of new features in Windows 8 and can be revealed with the help of touchpad or tracked gestures.

How to use windows 8’s gestures on a laptop trackpad

In Windows 8, moving the mouse cursor to the upper or lower right corner of the screen reveals the Charms bar, and moving the cursor to the left-edge of the screen brings up the app-switch to quickly switch between running apps.

If you running Windows 8 on a compatible notebook or if you have purchased a notebook preinstalled with Windows 8, you don’t need to use the mouse cursor to access app-switch or Charms bar. You can simply use the edges of the touchpad to access them. For instance, on a compatible touchpad, swiping from the right edge of the touchpad to the left reveals the Charms bar and swiping from the left edge of the touchpad to the right brings up the app-switch.

Users who have upgraded their Windows 7 notebooks to Windows 8 may need to enable the touchpad gestures by following our how to enable touchpad gestures in Windows 8 guide.

Following are the new touchpad gestures introduced with Windows 8:

# Slide-in from the right edge of the touchpad to view the Charms bar. As you may know, Charms bar lets you quickly access Start screen, settings, share, devices and settings options.

How to use windows 8’s gestures on a laptop trackpad

# Slide-in from the left edge of the touchpad to view the app-switch or switcher to quickly switch between running apps.

How to use windows 8’s gestures on a laptop trackpad

# Swipe down from the top edge of the touchpad to display app’s bar or Start screen’s app bar. You can also use Windows + Z hotkey or right-click anywhere on the screen to reveal the app bar.

How to use windows 8’s gestures on a laptop trackpad

# To perform rotate action, move two fingers on the touchpad and then move them in a circle.

# Move two fingers on the trackpad and then move them from right to left or left to right to perform horizontal scrolling.

# The pinch gesture lets you zoom in and out. Place two fingers on the touchpad and then move them towards each other or move them in opposite direction to perform zoom out.

Touchpads can be a hindrance to some of us who have toddlers running around the house. Having them tinker with a touchpad and the mouse pointers subsequent motion might interest them further to the point of disassembling the laptop for the sake of science. We may know how to disable the touchpad but we sometimes forget how to restore functionality when the toddlers go to bed. This tutorial will show you how to enable the Touchpad on your laptop equipped with Windows 8.

1. Power up and log-in to your laptop running Windows 8.

2. Go to Control Panel>Hardware and Sound.

3. On the listing of Devices and Printers click on Mouse.

4. A new pop up window will come forth. You will be greeted with the option of a touchpad.

If you’re working with an HP laptop, the last tab will hold the option with Synaptics settings. If the touchpad is disabled, click on enable after highlighting the device in the list below. Some HP laptops also have the first tab with check boxes of which the first will be to enable Touchpad.

If you’re working with a Dell laptop the first tab will have an option Click to change Dell Touchpad settings. From there you will see Touchpad as an option with a radio button to toggle on or off. If it’s in the Off position, click on it to change to On.

5. If your laptop doesn’t have fancy options via a software to enable or disable the touchpad, you can look through Device Manger, listed under Mice and other pointing devices Touchpad. Right click on it and select on enable.

6. Your laptop should have a button whereby you can enable or disable the touchpad. You can also look through the keys on your keyboard and see if there are any hotkeys you can use to enable the touchpad. Dell Inspiron laptops require an end user to press FN+F3 to enable or disable the touchpad.

Hopefully you’ve enabled the touchpad on your Windows 8 laptop and now getting about to your pending chores.

How to use windows 8’s gestures on a laptop trackpad

Windows 10 has touchpad gestures that everyone should know. You’ll need a precision touchpad to use them all, but experiment to see which ones work on your PC. We’ll show you how the gestures look on a Surface Pro 3.

  1. Scroll: Place two fingers on the touchpad and slide horizontally or vertically.
  2. Zoom in or out: Place two fingers on the touchpad and pinch in or stretch out.
  3. Show more commands (similar to right-clicking): Tap the touchpad with two fingers, or press in the lower-right corner.
  4. Drag windows: Double-tap and drag the menu bar (top of app window)
  5. See all open windows: Place three fingers on the touchpad and swipe them away from you.
  6. Show Task view: If you’re viewing all open windows (from the step above), swipe up again with three fingers.
  7. Show the desktop: Place three fingers on the touchpad and swipe them towards yourself.
  8. Switch between open windows: Place three fingers on the touchpad and swipe right or left.
  9. Cortana/Action Center: Tap the touchpad with three fingers.

How to check if your PC has a precision touchpad

Precision touchpads are a new kind of touchpad designed for PCs that run Windows 8.1, Windows RT 8.1, and Windows 10. They’re great for using a variety of touch gestures to get around your PC quickly. To find out if your PC has a precision touchpad, go to Settings > Devices > Mouse & touchpad. Look for the message, “Your PC has a precision touchpad.” You can also change or disable gestures here.

If you think this guide is helpful, we have many more posts like this in our Windows 10 help, tips and tricks page.

How to use windows 8’s gestures on a laptop trackpad

Here’s everything we know about Psychonauts 2 on Xbox and PC

The long-awaited sequel to the original Psychonauts is coming. Here’s what we know about Psychonauts 2, including its release date, gameplay, how to preorder, and much more.

How to use windows 8’s gestures on a laptop trackpad

On this week’s podcast . Windows 11, Cloud PC, Microsoft Teams, and more

We’re back with another exciting episode of the Windows Central Podcast, and this week, we check out the latest news on Windows 11, Windows 10 21H2, the Steam Deck handheld console, and Dan’s review of the Dell XPS 13 OLED model. All that, AND Zac sits down for a conversation with the great Mary Jo Foley!

How to use windows 8’s gestures on a laptop trackpad

Review: Lenovo’s Legion 5 Pro takes the gaming series to the next level

With a new 16:10 16-inch display with QHD+ resolution, insane performance, and modest design, the Legion 5 Pro is easy to recommend. However, there is a caveat with AMD performance when the laptop is on battery power.

How to use windows 8’s gestures on a laptop trackpad

These are the best PC sticks when you’re on the move

Instant computer — just add a screen. That’s the general idea behind the ultra-portable PC, but it can be hard to know which one you want. Relax, we have you covered!

Сводка: Если сенсорная панель не работает должным образом, разверните раздел, подходящий для вашей проблемы, и следуйте инструкциям. Свернуть Если сенсорная панель не работает должным образом, разверните раздел, подходящий для вашей проблемы, и следуйте инструкциям.

  • Содержание статьи
  • Свойства статьи
  • Оцените эту статью

Содержание статьи

Симптомы

Причина

Как определить, есть ли на ноутбуке или планшете высокоточная сенсорная панель

  1. В поле Поиск введите touchpad.
  2. Нажмите Параметры мыши и сенсорной панели (Системные параметры).
  3. Ищите сообщение Ваш компьютер оборудован высокоточной сенсорной панелью.

Курсор перемещается рывками или не перемещается вообще

  1. На сенсорной панели и на вашем пальце не должно быть грязи, жидкости или пищи (для правильной работы сенсорной панели требуется непосредственный контакт с пальцем).
  2. Проверьте, что сенсорная панель включена. Дополнительные сведения см. в разделе Как отключить или включить сенсорную панель ноутбука.
  3. Сохраните все данные, закройте все открытые программы и перезагрузите компьютер, используя проводную мышь USB (при наличии) или беспроводную мышь Bluetooth, если она уже установлена. Если нет, нажмите и удерживайте кнопку питания в течение не менее 15 секунд для выключения компьютера (будут потеряны все не сохраненные данные).
  4. Отключите все, кроме кабеля питания, включая:
    • Динамики
    • Принтеры
    • Сканеры
    • USB-устройства
    • USB-накопители и другие внешние устройства хранения
    • Внешний монитор
    • Внешняя клавиатура
    • Внешняя мышь
    • Если ваш компьютер подключен к док-станции, отключите его.
  5. Включите компьютер и проверьте сенсорную панель еще раз.

Чтобы изменить параметры высокоточной сенсорной панели, выполните следующие действия.

  1. В поле Поиск введите touchpad.
  2. Нажмите Параметры мыши и сенсорной панели (Системные параметры).
  3. В разделе Сенсорная панель внесите нужные изменения.
  4. Закройте страницу «Параметры мыши и сенсорной панели».

Курсор перемещается хаотично при вводе с клавиатуры ноутбука

  1. В поле Поиск введите touchpad.
  2. Нажмите Параметры мыши и сенсорной панели (Системные параметры).
  3. Чтобы курсор случайно не сдвинулся во время печати, выполните одно или оба приведенных ниже действия.
    • В раскрывающемся меню в разделе Для предотвращения случайного перемещения курсора при печати отключите касания или измените время задержки перед их срабатыванием выберите Длинная задержка.
    • В разделе Разрешить касание на сенсорной панели нажмите ползунок, чтобы изменить значение на Выкл.
  4. Закройте страницу «Параметры мыши и сенсорной панели».

Устранение неисправности медленного курсора

  1. На сенсорной панели и на вашем пальце не должно быть грязи, жидкости или пищи (для правильной работы сенсорной панели требуется непосредственный контакт с пальцем).
  2. В поле Поиск введите touchpad.
  3. Нажмите Параметры мыши и сенсорной панели (Системные параметры).
  4. В разделе Изменить скорость курсора передвиньте ползунок, чтобы настроить нужный уровень скорости перемещения курсора.
  5. Закройте страницу «Параметры мыши и сенсорной панели».

Как активировать жесты или перевернуть сенсорную панель точности

  1. В поле Поиск введите touchpad.
  2. Нажмите Параметры сенсорной панели (Системные параметры).
  3. Прокрутите окно в нижней части экрана настройки сенсорной панели и коснитесь или нажмите кнопку Сброс.
  4. Закройте страницу «настройки сенсорной панели».

Как отключить или включить высокоточную сенсорную панель ноутбука

Если вы все-таки хотите отключить высокоточную сенсорную панель, выполните следующие действия.

  1. В поле Поиск введите touchpad.
  2. Нажмите Параметры мыши и сенсорной панели (Системные параметры).
  3. Существует два способа отключения сенсорной панели, описанные ниже.
    • Чтобы отключить сенсорную панель на время подключения мыши, нажмите на ползунок в разделе Не отключать сенсорную панель при подключении мыши, чтобы изменить значение на Выкл.
    • Чтобы полностью отключить сенсорную панель, нажмите на ползунок в разделе Сенсорная панель, чтобы изменить значение на Выкл.
  4. Закройте страницу «Параметры мыши и сенсорной панели».

The new Windows 8 release to manufacturing doesn’t seem to support touch-pad gestures out of the box, so you may need to download the drivers yourself.

Installing the Windows 8 RTM (release-to-manufacturing) on my two laptops went smoothly yesterday except for one problem — no gesture support.

Trying to navigate the Start screen and other areas of the new OS, I found that left and right clicking on the touch pad worked fine. But using two fingers or other gestures to scroll or move around had no effect.

A Web search discovered other testers and users bumping into the same obstacle. This is odd, because I ran into no such problems with the Windows 8 Release Preview. So why doesn’t Windows 8 RTM handle touch-pad gestures right off the bat?

A Microsoft representative confirmed to CNET that Windows 8 RTM offers a generic driver that recognizes the touch pad as input, but the edge and multitouch gestures are not supported. In contrast, the Windows 8 Release Preview came with Elan alpha drivers to give people a taste of the full multitouch experience.

Elan and Synaptics are both working on updated touch-pad drivers, according to the rep. Those aren’t yet public, so Microsoft can’t distribute them. Many PC vendors also offer drivers that can enable multitouch gestures, but those aren’t yet fully optimized for Windows 8.

I resolved the problem by downloading drivers directly from Synaptics. I first hunted the Web for Windows 8 touch-pad drivers, but that search proved empty. Going directly to the Synaptics Web site, I discovered a page for generic touch-pad drivers for every operating system from Windows 95 to Windows 7, but no Windows 8 yet.

Screenshot by Lance Whitney/CNET

Downloading the Windows 7/Vista/XP drivers did the trick, though. After installing the 64-bit drivers in the Windows 8 RTM, I got my gestures and a full control panel for the touch pad where I could adjust all the settings. The drivers also picked up the red pointing stick on my Lenovo laptop, so I can now tweak that as well as my touch pad.

The Windows 7 Synaptics drivers seem to fill the niche just fine, at least until Windows 8-specific drivers become available.

Hopefully I’m missing something simple but can anyone tell me how to reposition/resize an open app using the touchpad?

It’s very simple to do with the mouse or with the pen.

Report abuse

Replies (3) 

🕱 Warning from a Moderator:

You may have received an email/reply to your question with a single toll-free number suggesting that you call Microsoft.

Do NOT call; this was a bogus message posted by a scammer, Bravo Smith8.

The phone number does not belong to Microsoft and the post has been removed.

Report abuse

Was this reply helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this reply?

Thanks for your feedback.

Thank you for reaching out Surface Community. Hover the mouse to the edge of that Window. It doesn’t matter which edge you will select. Once you will see an arrow with pointer on both ends, click in the middle of your touchpad or left click then drag, make sure you’re still pressing while dragging. You can do this with just one finger. Some use 2 fingers to resize Windows, first finger holding the left click/button while the other finger is for dragging.

If this works, we highly encourage you to inform our Community by clicking on Yes or marking my post as an answer. This will help other members who may have the same issue as you. Otherwise, don’t hesitate to update us so we can further assist you.