Categories
Interior

How to use your router and isp’s modem/router combo in tandem

Without a doubt on how to make use of your Router and ISP’s Modem/Router Combo In Tandem

Why Twice As Much Routers Equals Twice As Much Headaches

The worst type of technology issues will be the people which are tough to pin straight straight down. It simply won’t work, that’s an easy problem to troubleshoot if you get a new cable modem from your ISP, for example, and. But just what in the event that you start to see little but annoying dilemmas over the program of many weeks? It becomes increasingly hard to pin straight down what is incorrect along with your system (or what exactly is even causing it to start with).

Running two routers simultaneously on your own house community is strictly the sort of situation where these phantom issues can arise. You might end up in that situation without even realizing it before we get into exactly why that can cause such a headache, let’s look at how.

Probably the most common situation is this: your ISP offers you a modem that is really a mix modem/router, and after that you add a router of your very own. Now all your valuable traffic that is internet-bound is using your brand brand new router in addition to ISP-supplied router.

While that is the absolute most typical type of this issue, it may also take place if you utilize two routers in tandem. Perhaps you utilize an older router that is spare a switch for a few additional Ethernet ports, or as an additional Wi-Fi access point without precisely configuring it.

In most these circumstances, you get in a predicament where any provided interaction in your house community might(as well as must) go through two routers. Passing through two networking products that way is not automatically bad, but if both products are owning a Network Address Translation (NAT) solution, then chances are you end in networking bind known as a “Double NAT”.

The NAT solution in your router is an extremely thing that is handy. The bottom line is, it is the solution which takes all of the inbound demands directed at your single IP that is public, and deftly translates them into the interior personal internet protocol address details of the computer systems and devices. Whenever there are two of those, nonetheless, things have messy, since it forces dozens of system demands to traverse two interpretation activities.

At the best, it introduces latency into the system connections, which could cause lag in latency-sensitive applications like video gaming. At worst, it completely wrecks UPnP (Universal Plug and Enjoy) and just about every other router-based solution that utilizes the premise that the router is always facing away to the greater internet (rather than dealing with into another interior system). UPnP, the most frequent victim regarding the dual NAT, is a handy router service that automatically forwards ports in your router so applications that require specific or forwarded ports will continue to work correctly.

Whenever a computer device attached to router (that is in change attached to another router) tries to set up a slot ahead arrangement via UPnP, it ultimately ends up forwarded never to the higher internet but to another router. This forwarding-dead-end means many applications and services–communication apps like Skype, smart house apps and hardware such as your Nest thermoregulator, and music equipment such as your Sonos music system–either outright fail or need lots of irritating trouble shooting in your stead to correct.

As of this point, many of you’re most most likely tilting back in your seat and saying “Yes. That. We plugged my very own router in to the combo-box my ISP provided me with and today i’ve a number of headaches. Just exactly exactly What do i actually do?” let us glance at how exactly to identify if you are experiencing A nat that is double just how to repair it.

Simple tips to Identify a Double NAT

System Address Translation (NAT) is this kind of ubiquitous function in contemporary routers that in the event that you’ve just connected one router into another router, it is virtually a considering that you have unintentionally developed a dual NAT.

Nevertheless, it is handy to truly test whether or otherwise not you are behind a dual NAT, if for no other explanation it easy to confirm when you’ve fixed the situation than it makes. The test that is simplest you can easily conduct is check always exactly what the Wide-Area system (WAN) ip of one’s router(s) is. This is actually the internet protocol address of exactly exactly just what the router thinks to function as world that is outside could be defined as the “WAN IP”, “Internet IP”, “Internet Address”, or “Public Address” according to your router.

Log to the control board of each and every for the routers on your own house community. Then you will want to connect to both of them and check what they report as their WAN IPs if, for example, you have a router you purchased and a router supplied by your ISP. Listed here is an illustration, via our D-Link router running DD-WRT firmware, of exactly that which you’re in search of.

In the above screenshot you can observe that the “WAN IP” regarding the router is recognized as 97.*.*.*. That is exemplary, since it shows which our IP that is public address an ip that belongs to your ISP. What we don’t desire to see the following is an internet protocol address like 192.168.0.1, 10.0.0.1, or 172.16.0.1 or variations that are slight, as those target obstructs are reserved for personal companies. In the event that WAN ip of the router is anywhere within those target obstructs, it indicates your router isn’t linking right to the net it is alternatively linking to some other bit of routing equipment.

Just How to correct a Double NAT

There are numerous methods for you to fix a dual nat issue, and fortunately they are all pretty easy to use. While we would love to deliver specific guidelines for the precise situation, you will find way too numerous routers, a lot of firmware variations, and a lot of feasible combinations here of, for people to perhaps provide you with the precise mixture of actions for the hardware. However, if you combine our guidance having a Google search or two pertaining to your particular hardware and firmware, we are confident you’ll have actually the issue resolved very quickly.

If messing around with system equipment is brand brand new territory for you personally, you might check always away our right forward help guide to routers, switches, and community terminology before continuing.

Eliminate the Additional Hardware

This really is, undoubtedly, the easiest solution. In a scenario where there is certainly certainly a bit of redundant equipment then it’s easiest to simply eliminate it. Let’s say, for instance, you ( or perhaps the relative whose connection you are difficulty shooting) bought a pleasant brand brand new router and immediately plugged it to the old router. In place of deal with all the logistics and wasted power of operating two routers, it is possible to merely take away the old router to banish the dual recon NAT.

Without a doubt on how to make use of your Router and ISP’s Modem/Router Combo In Tandem

Why Twice As Much Routers Equals Twice As Much Headaches

The worst type of technology issues will be the people which are tough to pin straight straight down. It simply won’t work, that’s an easy problem to troubleshoot if you get a new cable modem from your ISP, for example, and. But just what in the event that you start to see little but annoying dilemmas over the program of many weeks? It becomes increasingly hard to pin straight down what is incorrect along with your system (or what exactly is even causing it to start with).

Running two routers simultaneously on your own house community is strictly the sort of situation where these phantom issues can arise. You might end up in that situation without even realizing it before we get into exactly why that can cause such a headache, let’s look at how.

Probably the most common situation is this: your ISP offers you a modem that is really a mix modem/router, and after that you add a router of your very own. Now all your valuable traffic that is internet-bound is using your brand brand new router in addition to ISP-supplied router.

While that is the absolute most typical type of this issue, it may also take place if you utilize two routers in tandem. Perhaps you utilize an older router that is spare a switch for a few additional Ethernet ports, or as an additional Wi-Fi access point without precisely configuring it.

In most these circumstances, you get in a predicament where any provided interaction in your house community might(as well as must) go through two routers. Passing through two networking products that way is not automatically bad, but if both products are owning a Network Address Translation (NAT) solution, then chances are you end in networking bind known as a “Double NAT”.

The NAT solution in your router is an extremely thing that is handy. The bottom line is, it is the solution which takes all of the inbound demands directed at your single IP that is public, and deftly translates free hookup sites them into the interior personal internet protocol address details of the computer systems and devices. Whenever there are two of those, nonetheless, things have messy, since it forces dozens of system demands to traverse two interpretation activities.

At the best, it introduces latency into the system connections, which could cause lag in latency-sensitive applications like video gaming. At worst, it completely wrecks UPnP (Universal Plug and Enjoy) and just about every other router-based solution that utilizes the premise that the router is always facing away to the greater internet (rather than dealing with into another interior system). UPnP, the most frequent victim regarding the dual NAT, is a handy router service that automatically forwards ports in your router so applications that require specific or forwarded ports will continue to work correctly.

Whenever a computer device attached to router (that is in change attached to another router) tries to set up a slot ahead arrangement via UPnP, it ultimately ends up forwarded never to the higher internet but to another router. This forwarding-dead-end means many applications and services–communication apps like Skype, smart house apps and hardware such as your Nest thermoregulator, and music equipment such as your Sonos music system–either outright fail or need lots of irritating trouble shooting in your stead to correct.

As of this point, many of you’re most most likely tilting back in your seat and saying “Yes. That. We plugged my very own router in to the combo-box my ISP provided me with and today i’ve a number of headaches. Just exactly exactly What do i actually do?” let us glance at how exactly to identify if you are experiencing A nat that is double just how to repair it.

Simple tips to Identify a Double NAT

System Address Translation (NAT) is this kind of ubiquitous function in contemporary routers that in the event that you’ve just connected one router into another router, it is virtually a considering that you have unintentionally developed a dual NAT.

Nevertheless, it is handy to truly test whether or otherwise not you are behind a dual NAT, if for no other explanation it easy to confirm when you’ve fixed the situation than it makes. The test that is simplest you can easily conduct is check always exactly what the Wide-Area system (WAN) ip of one’s router(s) is. This is actually the internet protocol address of exactly exactly just what the router thinks to function as world that is outside could be defined as the “WAN IP”, “Internet IP”, “Internet Address”, or “Public Address” according to your router.

Log to the control board of each and every for the routers on your own house community. Then you will want to connect to both of them and check what they report as their WAN IPs if, for example, you have a router you purchased and a router supplied by your ISP. Listed here is an illustration, via our D-Link router running DD-WRT firmware, of exactly that which you’re in search of.

In the above screenshot you can observe that the “WAN IP” regarding the router is recognized as 97.*.*.*. That is exemplary, since it shows which our IP that is public address an ip that belongs to your ISP. What we don’t desire to see the following is an internet protocol address like 192.168.0.1, 10.0.0.1, or 172.16.0.1 or variations that are slight, as those target obstructs are reserved for personal companies. In the event that WAN ip of the router is anywhere within those target obstructs, it indicates your router isn’t linking right to the net it is alternatively linking to some other bit of routing equipment.

Just How to correct a Double NAT

There are numerous methods for you to fix a dual nat issue, and fortunately they are all pretty easy to use. While we would love to deliver specific guidelines for the precise situation, you will find way too numerous routers, a lot of firmware variations, and a lot of feasible combinations here of, for people to perhaps provide you with the precise mixture of actions for the hardware. However, if you combine our guidance having a Google search or two pertaining to your particular hardware and firmware, we are confident you’ll have actually the issue resolved very quickly.

If messing around with system equipment is brand brand new territory for you personally, you might check always away our right forward help guide to routers, switches, and community terminology before continuing.

Eliminate the Additional Hardware

This really is, undoubtedly, the easiest solution. In a scenario where there is certainly certainly a bit of redundant equipment then it’s easiest to simply eliminate it. Let’s say, for instance, you ( or perhaps the relative whose connection you are difficulty shooting) bought a pleasant brand brand new router and immediately plugged it to the old router. In place of deal with all the logistics and wasted power of operating two routers, it is possible to merely take away the old router to banish the dual NAT.

If you have wanted to save yourself money while also increasing your router’s performance, you might have already considered a router upgrade.

Here’s how to upgrade the router supplied by your ISP.

    Get a compatible router. The first move that you need to make is to get a new router. You will need to peruse a list of Compatible Routers to make sure that the one that you are using a router that will work with your internet. Routers are not always universal and will not necessary work with your ISP, so check that before you do anything else.

Put Xfinity in Bridge Mode. If you have Comcast Xfinity, you will need to put the new router in Bridge Mode in order to use it. Use the following steps to achieve this:

    Go to the modem’s settings from a browser. It is often 192.168.1.1

Type in your username and password. The default login information is admin/admin, but if you have changed it, use that instead.

Select Gateway, then At a Glance.

Select Enable under Bridge Mode. Click ok.

Put AT&T Uverse in a DMZ network. AT&T likes to make it seem like you cannot use another router, but it’s not true. Rather than bridge mode, you have to use DMZ mode.

    Connect your new router to your AT&T router.

Log into your Uverse router through your browser.

Find the new router in the list of devices and select it.

Change the setting to “Allow all applications (DMZ + mode)” and save.

Under settings, find LAN then IP Address Allocation.

Check that the address assignment is set to Public.

Turn off both routers. Then, attach the AT&T router to the new router’s LAN port.

Putting Spectrum in Bridge Mode. Spectrum is a little bit difference since Bridge Mode is only supported for VDSL and fibre.

    Connect the new router to the gateway’s Ethernet port. Make sure the router is on.

In your browser, go to the gateway’s address. It should be 192.168.1.1 or 192.168.0.1.

Login using the default username and password.

Turn off the following settings once inside:

Under the LAN settings, change NAT mode to Bridged mode and save it.

Restart the router.

Other ISPs

If none of these scenarios apply to you, then it is likely that you can simply use your own router with your ISP without any trouble. If your ISP requires you to use their gateway that has a built-in router, you will need to disable the router through the modem’s settings, allowing you to plug in your own router and move forward.

Some of the more lucky users out there might be able to use their own gateways and routers, not needing to approve anything with the ISP. If this is the case, then you will only need to be sure that your device is compatible with the ISP. Otherwise, it will just be a matter of plugging it in and configuring the settings to your own needs.

Modem vs Modem/Router Combo

In the case that you get to choose your own modem and router, you will need to decide between getting a combo unit or opting for a separate units. Both have their pros and cons. A combo unit will be cheaper and easier to set up and to update, but it will not have all of the options you get from having separate devices. It is up to you.

Regardless, never let an ISP tell you that you must use their router. There are always work-arounds.

Home » Blog » Multimedia » Modem vs Router vs Modem Router Combo

How to use your router and isp’s modem/router combo in tandem

Even if you are slightly tech-savvy, you would know the basic difference between a modem and a router. A modem connects to the internet and the router connects various devices to a Wi-Fi. That is basic!

For a layman though, even this info is hard to comprehend. Someone who only knows how to pick the best of all the TV plans, this process would seem like a task. But being a regular user of the internet, we need to know some details to keep it smooth and functional. And that’s true for every contemporary internet user today.

Mixing some of these terms is easy. Let’s discuss the relevant details to know the difference.

What is the Difference between Modem and Router?

First things first. Modems and routers are completely different devices. A modem is directly connected to the Internet service provider. While the router is connected to the modem and makes the extension of the internet connection possible to multiple devices. It enables wireless signals to be sent throughout the homes, offices, and so on.

Modem vs Router

As mentioned already, these terms are tricky. Especially when most of the Internet plans have rental options for both these devices. Let’s not complicate things and keep them crisp and simple. Check out the following facts:

Modem Router
Modem brings the Internet to homes, offices, restaurants, and so on. Router brings the Internet to the devices.
It has a public IP address. Assigns local IP addresses
Makes use of a WAN network It creates a Local Area Network (LAN)

What does a Modem Do?

The device that plugs into an internet infrastructure type and communicates with the ISP is the modem. A modem is essential whether your internet type is cable, satellite, telephone, or fiber.

Modems come with a standard wired Ethernet connection that you are free to plug in a single computer. Or, you can plug it in a router that will then spread this connection wirelessly all across the house or a given space.

If you just need the internet to be running on one system or device, you only need a modem. Just make sure it is compatible with your ISP. You can lease modems from your ISPs on a monthly rental fee just like you can rent Spectrum Digital Receiver. Or, you can purchase a modem and take it as a one-time investment to save in the long haul.

What does a Router Do?

A router plugs into the modem (wired) and then wirelessly transmits internet signals all over the place for multiple gadgets and devices to be able to use the internet. A router routes your internet connection to multiple devices. It cannot be plugged in directly to the internet. You will essentially need a modem to let the router work.

Most routers are wireless but there are wired routers too. However, wired routers are not used much. Routers offer protection for the devices, which connect to them. They allow controlled exposure to the World Wide Web. If you go for high-end routers, the security features are more refined. To program a router is not as easy as you program TV remote. You may need some professional help.

Modem Router Combo

You may have browsed through the list of Spectrum compatible modems and routers, knowing that only modems and routers are needed in the functioning of the internet. ISPs also offer a modem-router combo. Yes, that right! It is a 2-in-1 device that has both, a modem and a router. You can also buy them on your own.

Since they are connected they do the job more conveniently for you. It is also a more economical option. However, it has its downsides such as less flexibility. Buying a router and a modem separately allows you to get your hands on the best devices and features, which fit your needs aptly. While with a modem-router combo, you are stuck with whatever it offers.

Again, buying one would help you save better instead of renting it from your ISP.

How does Mesh Network Work?

In many instances, one wireless router is not enough to provide internet coverage to an entire big space. For instance, one router cannot cover a workplace with multiple floors, a complicated layout, impenetrable walls, and a vast space. That’s where investing in a mesh network becomes a viable and sensible option.

A mesh network consists of a primary router and many nodes or satellites to relay the wireless internet signals from on to the other. Just like a chain! The mesh network doesn’t use extenders, which is a good thing because they affect the speeds and can only communicate with the router. The nodes of a mesh network are capable of communicating with one another. And there’s no loss or lag in the bandwidth. The signals are as strong as are relayed by the primary router.

Also, there is no limit to the number of nodes you can add. And it is all manageable with a smartphone. You can call the current ISP to know about whether they provide a mesh network because it’s a lucrative investment.

Contributing Writer, PCWorld |

Today’s Best Tech Deals

Picked by PCWorld’s Editors

Top Deals On Great Products

Picked by Techconnect’s Editors

Every month, we lose the equivalent of a sandwich or a really nice cup of coffee to the modem rental fee that we give to an ISP. But it doesn’t have to be that way.

Most ISPs charge anywhere from $4 to $7 per month for the modem that brings you Internet access—and you have to return it when you cancel your service. But most ISPs also let you buy your own modem, which is fairly easy for the average computer user to hook up. Some special modem types—like fiber or satellite—aren’t easily replaceable yet, but the vast majority of us can ditch our rented modems and reap some substantial benefits in the process.

The best reasons to switch

Installing your own modem will likely save you money. Though purchasing a new modem requires an initial investment of $50 to $100 (or more for a modem/router combo), your savings on rental fees will enable you to recoup the investment within one to two years. Since most people use the same modem for five to ten years, buying your own is definitely a moneysaver long-term.

Plus, if you shop around you can probably find a better modem than the one your ISP sent you. Your rental modem could be an older or even used model that doesn’t support the newer technology used by your ISP. Upgrading to a newer modem may give you faster speeds, especially if you’re subscribed to one of the higher-speed packages. But also understand your ISP will likely upgrade or replace your rental modem for free in these cases as well.

Many ISPs also limit your access to the Web-based control interface of rental modems, which can hamper your efforts to monitor or tweak your network. Buy your own modem and you’ll have full access, which can be useful for checking traffic logs and signal quality or troubleshooting Internet issues. If you really want to get your hands dirty, you can even play around with third-party firmware like Haxorware.

If you’re feeling ambitious, flashing your modem with third-party software like Haxorware can get you some performance improvements.

Finally, the most pragmatic reason to buy your own modem is to replace a busted one. When you rent a modem, your ISP usually provides free support and replacement services. But if they can’t fix or replace it quickly and you need Internet access right away, it’s probably worth taking the time to buy a modem off the shelf at your local electronics store and hook it up yourself.

With freedom, of course, comes responsibility. Your ISP likely won’t offer support if you have problems with your modem, and you’ll have to replace it yourself—or start renting again—if it stops working. Also, remember that the modem must support your current Internet connection. Switch from cable to DSL (or vice versa), for example, and you’d have to invest in another modem or start renting one again.

Buying the right box

Before you hit the streets to start shopping for a modem, check your ISP’s terms regarding the use of customer-owned modems and see if it supplies a list of recommended or approved models. Many ISPs (like Comcast, Time Warner, Cox, and AT&T) even offer this information on their websites. Some give just a simple list, while others recommend specific models for the different speed packages they offer.

If you have a cable Internet connection, the biggest spec to compare when shopping for a modem is the version of DOCSIS standard it supports. Some cable ISPs currently support DOCSIS 2.0, and are (or will be) upgrading their infrastructure to DOCSIS 3.0 to provide faster speeds and better performance, especially if you subscribe to their higher-speed packages. You can call your ISP to see which DOCSIS version it supports. Even if your ISP is still on 2.0, you probably want to prepare for the future and upgrade to a modem that supports DOCSIS 3.0, like the Motorola SURFboard SB6141 or the Zoom 5341.

Buying the latest modem can net you a tidy performance increase if your Internet package benefits from support for new networking technology like DOCSIS 3.0.

If you have a DSL Internet connection, note that there are different types and versions of DSL, and you need to buy a modem that’s compatible. Check with your ISP to figure out its specific type, but residential connections typically use ADSL, ADSL2, or ADSL2+ (in order from oldest to newest), and business connections could also use SDSL or VDSL. Consider investing in a modem that also supports a newer type of DSL, so you’ll be prepared if your ISP upgrades its system.

When shopping for a modem you might find modem/router combinations, commonly referred to as gateways, like the Motorola SURFboard Cable Gateway SBG6580 or the Actiontec DSL Modem Router GT784WN. These include the modem function to connect to the ISP and a wireless router function, so you can share the connection among multiple computers and devices wirelessly or by plugging them into the ethernet ports.

Gateways are more convenient than installing a modem and router separately, but you can’t tweak them as much as you could a discrete modem or router.

If your ISP has supplied you with a gateway instead of a simple modem and you intend to use your Internet access for more than one device, you should either buy another gateway or buy a separate modem and wireless router. Gateways are very convenient since there’s only one device to set up, but if you want the best wireless router features and performance you should consider purchasing them separately. If you buy your own router, I recommend consulting our guide to enhancing it with open-source firmware if you want to get the best performance possible.

Installing your new modem

Installing or replacing your modem is usually a fairly straightforward process. You can follow the instructions that come with the new modem, but frankly you can probably figure out what to do just by looking at your existing modem and swapping it for the new one.

Once you’ve done that, you may have to call your ISP and provide the modem’s MAC address to activate your Internet connection. You can usually find your modem’s MAC address printed as a twelve-digit number on the back of the modem itself, usually with a prefix like MAC or CABLE MAC. If you bought a gateway or a modem/router combo, you’ll also have to set up your new wireless network before you can connect your devices and start enjoying your sweet new bandwidth.

Eric Geier is a freelance tech writer. He’s also the founder of NoWiresSecurity, providing a cloud-based Wi-Fi security service; Wi-Fi Surveyors, providing RF site surveying; and On Spot Techs, providing general IT services.

  • Mark as New
  • Bookmark
  • Subscribe
  • Subscribe to RSS Feed
  • Permalink
  • Print
  • Email to a Friend
  • Report Inappropriate Content
  • Mark as New
  • Bookmark
  • Subscribe
  • Subscribe to RSS Feed
  • Permalink
  • Print
  • Email to a Friend
  • Report Inappropriate Content

Can access the modems web page at 192.168.0.1 or 192.168.100.1 in a web browser?

  • Mark as New
  • Bookmark
  • Subscribe
  • Subscribe to RSS Feed
  • Permalink
  • Print
  • Email to a Friend
  • Report Inappropriate Content
  • Mark as New
  • Bookmark
  • Subscribe
  • Subscribe to RSS Feed
  • Permalink
  • Print
  • Email to a Friend
  • Report Inappropriate Content
  • Mark as New
  • Bookmark
  • Subscribe
  • Subscribe to RSS Feed
  • Permalink
  • Print
  • Email to a Friend
  • Report Inappropriate Content

Ok, then well you can’t use the C series modem at all. Even in bridge mode. This model modem needs a coax cable line from a cable ISP. When in bridge mode this mode turns off and disables the router and wifi portion of the C series modem, leaving just the modem working. Your ISP is using fiber ONT to a Arris modem router combo unit.

So either you can use the Arris modem router combo as your host router and wifi, your you can connect up a external wifi router like a NG Nighhawk or Orbi wifi MESH system. Though you’ll be in a double nat condition unless you use the modems DMZ or IP pass thru for the down stream router OR use the Arris modem as your main host router and disable the wifi radios and configure the NG router for AP mode which is an option. I would recommend the latter.

Our best ideas always start with you, our readers and customers. One recently sent us a question that we receive pretty frequently. So we figured we’d publish the latest in our series of popular FlashRouter FAQs.

Open Source Firmware on DSL Modem Routers

I have a DSL modem from my ISP. Can I flash my DSL modem/router with DD-WRT so I can use VPN on it?

– Chip in Chattanooga, TN

Thanks for the question Chip! The simple answer is no. DD-WRT firmware is not compatible with DSL, VDSL or ADSL modem combinations.

A common issue for many users looking to integrate DD-WRT within their setup is the fact that modems and, with this, modem routers cannot be flashed with Open Source firmware. As these devices do not use Broadcom or Atheros chips and the drivers for these products have not been made public or released to open source development teams, modem routers simply have not developed with and cannot be flashed with alternative/non-ISP firmware.

There are two major reasons we see this as the case.

1. DSL Modem/Routers Are Usually Outdated, Cheap Throw Ins – Usually DSL modem router combo devices are offered with outdated technology to minimize bandwidth use which cost providers more. So basically, the more powerful the router, the more bandwidth you will use. Therefore, they offer you a free device that gives you just enough to keep you somewhat happy without maximizing the capabilities of your network.

Even the best DSL modem router, being a combination of a modem and a router, is a less powerful device when compared to a standalone router or FlashRouter, as the specs of the device need to be lessened to host an actual modem.

They usually force you to rent this underpowered device which also adds to their profits. Generally, the router part of these modems are basic single band wireless-N devices with a 300-400 MHz processor with max wireless transmission at 300 Mbps with older generation fast Ethernet ports. If you upgrade to a higher plan, they might throw you a bone and double that wireless speed to up to 600 Mbps transmission power with average range.

You will not see a Wireless-AC device with max range for transmitting streaming video signal through you home or 1 GHz processors of up to 2400 Mbps. We are talking a minimum of 3-4 times as powerful devices when it comes to standalone Wireless-AC DD-WRT options.

2. ISPs Want To See Your Traffic Usage & Data – The average customer just wants their router to work so an ISP has limited impetus for improved, enterprise-level firmware.

Open-source firmware is developed to be used on standalone routers and the modems complicate the firmware part. Plus these modem routers are usually an under-powered combination.

Using VPN with a DSL modem router combo network-wide is not a built-in option that most ISPs do or will ever offer. ISPs are in the business of monitoring and managing traffic so to offer built-in protection for privacy protocols like VPN is antithetical to their business model, meaning it will not make them money.

Using VPN with a DSL Modem Router

The best option for users having this dilemma is to use a VPN FlashRouter in tandem with their DSL modem/router combination. Add a DD-WRT router behind it to router and manage your traffic as your main network gateway using the FlashRouters Dual Router Setup.

How To Use a FlashRouter in a Two Router Setup

Within a Dual Router Setup, the modem router maintains a connection to your ISP passing that connectivity to a DD-WRT FlashRouter alongside it, creating a second network more powerful network with limited setup or frustration. If you choose to use your FlashRouter as a VPN (Virtual Private Network) router, your second network will be a VPN-dedicated device network so you can add any devices connected to the network will be encrypted by a VPN. Take a look at some of our most popular providers.

HMA is one of the most popular VPN services out there offering faster connections and wider access to restricted sites around the world than other VPN providers.

  • 1000+ servers in 190+ countries
  • Load balancing feature ensuring the fastest connection speeds
  • Easy-to-setup and use connections and features

How to use your router and isp’s modem/router combo in tandem

Secure your digital life today with Surfshark, a new and powerful VPN provider. Surfshark is based in the British Virgin Islands, which has no data retention laws. This ensures that no data can be accessed from prying eyes.

  • Access streaming content from around the world
  • Operates 1500+ Servers in 60+ Countries
  • Comes with exclusive Hackblock and BlindSearch features

Most Popular/Best DSL Modem Router Combos By Region

As the world is covered by a diverse list of Internet Service Providers, there are many modem routers that may have found their way into your home, such as the:

  • Telmex (Mexico, Brazil, and the rest of Latin America) – Technicolor Tg582n Nuevo Daa
  • Movistar (Spain and Latin America) – Huawei Echolife HG520V FTTH
  • Orange (UK, France, Kenya, Poland, Switzerland, etc.) – Livebox
  • Virgin Media (UK) – Super Hub
  • Bell (Canada) – Wi-Fi Pod
  • Sky (UK) – Sky Hub
  • Foxtel (Australia) – iQHD
  • FRITZ!Box (Germany) – Fon WLAN 7490
  • Etisalat (Middle East) – D-Link Wireless N 300 Router
  • Verizon (United States) – FiOS Actiontec Modem Router
  • …and any other DSL/Cable/Fiber-Optic modem router from any provider around the world!

A FlashRouter can work alongside any of these popular modem/router combinations. The process is as simple as connecting a FlashRouter to a modem router via Ethernet cable. Once this connection is established, you have will have two networks, one for your ISP and one, if you so choose, for your VPN connection.

If you are using a modem router from any provider, we can support it. Want to be sure? Contact our networking specialists and we can look into it and add it to this list for other potential users.

DD-WRT Router To Use VPN with a DSL Modem Router Combo

How to use your router and isp’s modem/router combo in tandem

Whether you are a Telmex customer in Brazil, a FusionGOL subscriber in Japan, or a Comcast user in the United States, a FlashRouter will comfortably slip right into your setup behind a modem router combo. Here’s just a few of our enhanced router favorites FlashRouters ready to overhaul your DSL, ADSL, or VDSL network connection!

You will be better off buying a router that will actually work for your network and one that does not require a monthly fee.

Chris Smith

  • June 12, 2020
  • How to use your router and isp’s modem/router combo in tandem

    Charter Spectrum cable internet is one of the most popular ISPs in North America. It is widely available and the service is often affordable and easy to manage. Unfortunately, there is a common issue with Spectrum: using their modem/router combo. Spectrum will tell you that they are giving you the device for free, leaving out that you will now have to pay $5 a month to use the wireless router.

    The best solution to this problem is to use the free modem, but disable the internal router and use one of your own. While it sounds tedious, it is worth the trouble, as long as you know-how.

    Pros to Having your own Router

    First, let’s go over all of the benefits of having your own router instead of using Spectrum’s router.

    • Save Money: You will avoid the recurring $5 monthly WiFi charge from Spectrum
    • More Choice: You will be able to choose the features that you really want from your router, including using a mesh system for extended coverage
    • Better Security: You can get more security options as well to keep your router as locked down and safe as possible.

    Ultimately, you will be able to have a router that really works for your network’s needs rather than a router that is only just “ok.”

    1. Buying a new router. The first thing that you need to do is get a Spectrum compatible router. You will want to have the best Spectrum router possible, so make sure that it is going to fit your needs. You will want your new router to support 802.11n and 802.11ac protocols to support existing devices on your network. You will also want a router that is at least dual-band, if not tri-band.

    Naturally, Spectrum will not be able provide any support for a router that is not their own, so make sure that you are comfortable with the use of the new router or know that the new router’s manufacturer has reliable customer service.

    1. Turning off the internal router. After you have acquired your new router, you will need to first disable the internal router in the modem/router combo that you received from Spectrum. It will not work to have two routers running over the top of each other.
    • Putting Spectrum in Bridge Mode. Bridge mode is where you can use a separate router with your existing Spectrum modem/router combo.
    • Connect the new router to the gateway’s Ethernet port. Make sure the device is on.
    • In your browser, go to the gateway’s address. It should be 192.168.1.1 or 192.168.0.1.
    • Login using the default username and password.
    • Turn off the following settings once inside:
    • Wireless
    • Routing
    • DHCP
    • Firewall
    • Under the LAN settings, change NAT mode to Bridged mode and save it.
    • Restart the modem.
    1. Setup the new router. After you have finished putting the modem into bridge mode, disabling the internal router, you can set up your new one. You should have already run an Ethernet cable from your modem to your new router and it should be plugged into the power outlet as well. Once the router has booted up, you can access the router’s settings and get started. The login information should have come with the new router. You will need to open up a browser on your computer and type in the IP address. It should have default login information, such as “admin” with a password of “admin,” or something similar.

    The first thing that you will want to change is the login information. Make it unique and the password should be impossible for an outsider to guess. There, you will be able to set up your all of your security and personalization features as well to make the router your own.

    Once you have personalized your router, you should reboot it to allow the settings to take effect. Then you should be able to get your devices connected.

    Do not be fooled by Spectrum’s ploys of a “free” router. You will be better off buying a router that will actually work for your network and one that does not require a monthly fee. Learn more here.

    Have any thoughts on this? Let us know down below in the comments or carry the discussion over to our Twitter or Facebook.

    Between the rental fees and the mediocre hardware, the latest numbers from the American Customer Satisfaction Index suggest that ISPs have some work to do.

    Most internet service providers offer their own modem and router hardware when you sign up for an internet plan, but it’s a very common piece of tech advice that you’re better off buying your own gear. For starters, doing so might allow you to skip an obnoxious equipment rental fee . What’s more, buying your own router will give you the chance to upgrade to something faster and easier to use , or to bring a meaningful upgrade like mesh or Wi-Fi 6 under your roof.

    Now, that argument is getting some fresh support from the American Customer Satisfaction Index, which surveys about 180,000 consumers each year about the products and services they use across dozens of industries and hundreds of companies. And the latest numbers on ISPs, released in early June. well, they aren’t great.

    Editors’ top picks

    For the first time, the ACSI surveyed in-home Wi-Fi satisfaction this year, with a particular focus on how your experience differs when you use your own hardware as opposed to the default ISP hardware. The survey looked at a number of different metrics, with consumers ranking each one on a scale of 1-100, with 100 being totally satisfied. Score for score, the customers using their own hardware came out ahead.

    Meet the Wi-Fi 6 routers that support 802.11ax

    The biggest gulf in happiness was with the cost. Consumers using their own networking hardware ranked their satisfaction with the value of their purchases at 72 out of 100. Those using the ISP hardware scored the value at 66.

    Other metrics were closer, but the ISP hardware lagged behind in each category. Customers who bought their own modem or router were happier with how quickly equipment restarted (74 versus 69 for the ISPs), happier with reliability of service (75 versus 71 for the ISPs), and happier with range (75 versus 72 for the ISPs). Both types of customers reported roughly the same level of satisfaction with the security of their networks (75 for third-party hardware versus 74 for the ISP hardware).

    It isn’t all bad news for the ISPs. This year’s overall customer satisfaction score of 65 for the category is up 4.8% from last year, with eight of 11 ISPs showing improvement. Comcast Xfinity saw the biggest jump, surging 8% to a third-place score of 66, while Verizon Fios improved 4% to a best-in-class score of 73.

    “ISP customers were happier with the variety of available internet plans this year, and they found internet service more reliable,” says ASCI’s David Vanamburg. “If ISPs can make progress in those areas, then there’s no reason why they can’t make similar gains in the hardware department by offering more reasonable equipment rental prices and improving the reliability of in-home Wi-Fi.”

    Still, the improvement was only enough to lift ISPs into second-to-last-place among the industries that ASCI scores. With the exception of mobile app quality (79) and reliability (77), most of the benchmark scores for the category remain relatively low, ASCI says.

    That said, when ACSI polled for satisfaction with overall Wi-Fi quality, it was actually hardware from Verizon Fios that led the way with a score of 77 out of 100. It was the only ISP to beat out the top third-party manufacturers. Next up were Netgear and TP-Link, which each scored a 75, and Linksys, which scored a 73. Comcast Xfinity, another ISP, was right behind at 72, followed by Asus at 71.