Life hack

How to Do Threading

Introduction: How to Thread Eyebrows

How to Do Threading

How to Do Threading

How to Do Threading

The art of eyebrow threading is a very old beauty technique. In a nut shell, it involves removing hair with thread. Some say it originated in the Middle East, others think it started in India. Either way, it’s a pretty cool concept, but a little tricky to master.

So, I hope this Instructable will help you on your quest of learning how to thread eyebrows.

Step 1:

-First you will need to cut a piece of sewing thread about 11inches long (if you have big hands/fingers then you might need a longer piece of thread).

-Then tie the thread in a knot to make a loop.

Step 2:

-Insert two fingers from both hands into the loop. Make sure to keep the knot on your fingers to keep it hidden.

-Twist the fingers on one hand to make an ‘X’.

-Twist your fingers a few more times in the same direction (about 4 twists should be enough).

Step 3:

-Now, place your index finger and thumb inside the loop (make sure you don’t lose the shape of the thread or you’ll have to repeat step 2).

-Keep the fingers of one hand pinched together while you open the fingers of the other hand. This will slide the twisted part of the thread over. This movement is how the thread grips the hair and pulls it out. (kind of like when you rub a rubber band over your arm and it pulls out your hair. actually it hurts like that too when you are removing multiple hairs such as your upper lip).

Step 4:

-What you want to do is make sure you pull the hair in the opposite direction of the way it grows.
So, place one hand above your brow and the other below. The hand that will be used to move the twisted part of the thread will be the hand below the brows.

-Place the hair you want to pull out in the ‘V’ part of the thread.

-Open fingers on hand below brow to move the twist over the hair. The hair gets caught in the twist and THUS will be pulled out. Do this movement fast. It will work easier and be painless.

Step 5:

Open the fingers of the other hand to place the twist back in the middle. Then you can repeat step 4 over again.

***MAKE SURE WHEN YOU DO THIS MOVEMENT YOU DON’T HAVE THE THREAD NEAR HAIR. It could lead to accidently pulling hair out.***

Step 6:

-When threading near hair you don’t want removed, you can use the thread to push the hair out of the way. This will allow easier access to the one hair you want removed.

Step 7:

I suggest practicing the movements first. Alternating between opening one hand then the other.

I also suggest practicing on your(or your boyfriend’s) leg hair before attempting the brow. It is hard to control the thread in the beginning. If you don’t practice first, you may end up with very oddly shaped eyebrows.

Sometimes we need more than one Tweet to express ourselves.В A thread on Twitter is a series of connected Tweets from one person. With a thread you can provide additional context, an update, or an extended point by connecting multiple Tweets together.

How to create a thread

  1. Tap the compose iconВ

to draft a new Tweet.
To add another Tweet(s), tap the highlighted plus iconВ

(the icon will highlight once you have entered in text).
Note: If you go over the character limit, the text that is over the limit will be highlighted for easier editing before you Tweet.В
To delete any of your Tweets, tap the gray delete iconВ

To delete the entire thread, tap the blue delete iconВ

When you have finished adding all the Tweets you’d like included in your thread, tap Tweet all to post.
Note: A thread can be saved as a draft by tapping the delete iconВ

Drafts of threads are distinguishable from a single Tweet draft by indicating the number of Tweets in your thread. Tap View (number of) Tweets to review and or edit any of your drafts prior to Tweeting.

How to create a thread

  1. Tap the compose iconВ

to draft a new Tweet.
To add another Tweet(s), tap the highlighted plus iconВ

(the icon will highlight once you have entered in text).
Note: If you go over the character limit, the text that is over the limit will be highlighted for easier editing before you Tweet.
To delete any of your Tweets, tap the gray delete iconВ

To delete the entire thread, tap the blue delete iconВ

When you have finished adding all the Tweets you’d like included in your thread, tap Tweet all to post.
Note: A thread can be saved as a draft by tapping the delete iconВ

Drafts of threads are distinguishable from a single Tweet draft by indicating the number of Tweets in your thread. Tap View (number of) Tweets to review and or edit any of your drafts prior to Tweeting.

How to create a thread

  1. Click the Tweet button to draft a new Tweet.
  2. To add another Tweet(s), click the highlighted plus iconВ

(the icon will highlight once you have entered in text).
Note: If you go over the character limit, the text that is over the limit will be highlighted for easier editing before you post.
To delete any of your Tweets, click the delete buttonВ

  • When you have finished adding all the Tweets you’d like included in your thread, click the Tweet all button to post.
  • Note : Once you have posted a thread, you can always add additional Tweets from the thread detail page. Simply click or tap Add another Tweet to post additional Tweet(s). This prompt is only visible to the thread author.

    How to add a thread

    Tap the compose icon.

    Pull down from the compose window and tap Continue Thread to Add to your last Tweet.

    Add content, and tap Tweet to add to your thread.В

    To add a thread to an earlier Tweet, clickВ

    to Select another Tweet.

    How to view threads through your Home and profile timelines

    A thread from someone you follow with 2 or 3 Tweets will generally appear on your timeline connected by a line to distinguish them as a bundle. When there are 4 or more Tweets in a thread, the Tweets will be truncated, and you’ll see an option to Show this thread. Click or tap this message to expand the full thread.

    Threads on your profile timeline will appear as separate Tweets, in reverse chronological order. Each Tweet that is a part of your thread will have an option to Show this thread to view the thread in its entirety.

    More about threads

    Direct Messages:

    When you share a single Tweet from a thread via Direct Message, the recipient will see the Show this thread option to expand the entire thread for full context.


    If you are mentioned in a thread, you’ll receive a notification through your Notifications timeline, a push notification, and/or an email notifications – depending on your settings:

    Notifications timeline: Each time you are mentioned in a thread, it will be visible in your Notifications timeline. The Tweet will indicate it is a part of a thread through the Show this thread prompt.

    Push notification: Each time you are mentioned in a thread, you will receive a notification to alert you. Additionally, if you have elected to receive push notifications when an account Tweets, you will receive one notification when they send a thread.

    Retweets andВ Quote Tweet

    When you Retweet orВ Quote Tweet from a thread, the Retweet orВ Quote Tweet will include a Show this thread prompt for people to view the entire thread.

    How to Do Threading

    How to Do Threading


    Thread lift procedure is a minimally invasive alternative to facelift surgery. Thread lifts claim to tighten your skin by inserting medical-grade thread material into your face and then “pulling” your skin up by tightening the thread.


    Thread lifts are considered a low-risk procedure with minimal recovery time, but side effects of redness, bruising, and swelling do occur.


    This procedure can be performed in about 45 minutes, and, if you want to, you can go right back to work afterward. Finding a trained, licensed provider is the key to a safe, effective thread lift.


    A thread lift is less expensive than a traditional facelift, but it’s not covered by insurance. Costs vary according to many factors, but the average cost is around $2,250.


    Thread lift procedures aren’t as dramatically effective as facelifts, and studies on their long-term efficacy are lacking. Results from a thread lift last from 1 to 3 years. For best results, surgeons recommend combining a thread lift with other kinds of anti-aging procedures, such as ultherapy.

    A thread lift, also called a barbed suture lift, is a cosmetic procedure that aims to lift and sculpt the shape of your face or breasts. Thread lifts use temporary, medical-grade suture material to “stitch-up” your skin so that it’s drawn taut.

    Thread lifts have been around since the 1990s , but innovations in the material used for thread lifts have led to an increase in popularity in recent years.

    The typical candidate for a thread lift is in their late 30s to early 50s. A person who is generally in good health and is just starting to notice the signs of aging may benefit the most from the subtle impact of a thread lift.

    Those who can’t have a surgical facelift because of medical conditions that make general anesthesia risky may consider a thread lift as a safer alternative.

    The costs of a thread lift will vary widely according to where you live, how much experience your provider has, and how many areas you are going to target with your treatment.

    One doctor calculated that a thread lift typically costs 40 percent of what a traditional facelift would cost. According to self-reported costs on, the average cost of a thread lift in the United States is $2,250.

    Your forehead, jowls, under-eye area, and eyebrow are all parts of your face that can be considered for a thread lift. You can choose to target just one area or several at once, increasing the cost. A thread lift used to draw up and tighten the breasts may be more costly.

    Thread lifts don’t require general anesthesia, so you save money on the cost of sedation. You also don’t have to consider taking recovery time off from work. Recovery is minimal — it can even be done on your lunch break.

    Your plastic surgeon may recommend that you get additional therapies or cosmetic procedures such as Botox or Juvederm to boost the effects of your thread lift. Make sure that you’re aware of any costs associated with these procedures.

    The thread lift procedure works in two ways.

    The first is fairly straightforward. By threading thin, dissolvable sutures underneath your skin, your doctor is able to pull your skin tight around your forehead, neck, or torso.

    Invisible, painless “barbs” grab on to your skin and make sure that the thread grips your underlying tissue and muscles as the thread is pulled tight.

    Once a barbed thread is inserted, your body’s healing response is triggered. Even though you’re not injured by the threads under your skin, your body detects a suture material and stimulates collagen production in the affected area. Collagen can fill gaps in sagging skin and restore a more youthful elasticity to your face.

    A small 2017 study suggested that the primary effect of a thread lift procedure is skin appearing tighter and more structured. After a year, this effect begins to decrease as the sutures dissolve. However, there was a secondary “rejuvenation” effect that stayed in place and was noticeable 3 years or more after the procedure.

    A 2019 review of the literature concerning thread lifts concluded that more research was needed to understand the long-term effects of them, as technology and methods of providing thread lifts continue to evolve.

    How to Do Threading

    Whether you’re used to a more maintained brow look or are in need of some extra TLC in the arch department, eyebrow threading is an excellent, natural option for hair removal. With its origins in Asia centuries ago, eyebrow threading is a simple process that is often considered to be one of the most painless (and least invasive) options for shaping brows. But if you’ve ever seen it in action and have wondered how a single piece of thread (held in the practitioner’s mouth) can transform arches in mere minutes, allow us to explain.

    What Exactly Is Brow Threading?

    The threading process is quite simple and typically involves a single piece of cotton thread, according to Shobha Tummala, the founder of Shobha hair-removal salon. After wiping the eyebrow area clean with alcohol, the thread is “twisted and pulled along areas of unwanted hair acting like a mini-lasso, lifting the hair directly from the root without the use of any chemicals or unnecessary tugging on delicate skin,” she explains.

    One of the most common methods of threading is with the long strand of cotton thread — held in one end of the mouth, says Nitasha Dahiya, owner of Dupont Threading in Washington, D.C. “The thread is twisted in order to efficiently roll over the skin to individually pluck the roots of unwanted hair,” she says. While there are many different threading methods, Dahiya says this is the most practiced technique.

    Other methods include either the use of a chain instead of the mouth to hold the thread, or the “butterfly method,” which has the knotted thread being twisted and pulled through two fingers on each hand, says Dahiya. Clients are typically in a reclining chair and asked to hold the skin taut around the brow, which makes the area more accessible and often alleviates the discomfort, too.

    The Benefits of Brow Threading

    As opposed to waxing, tweezing, or lasers, threading is considered one of the safest and most precise methods of hair removal, especially in the delicate areas surrounding the eye. “Threading allows our specialists to have greater control over which hairs are removed,” says Tummala. The technique is also “100 percent natural,” which means there are no artificial waxes, chemicals, or invasive techniques used during the procedure.

    Do you need your PC to become faster without going for a hardware makeover? Then consider hyper-threading the cores of your central processing unit (CPU).

    You might ask, “What is hyper-threading, and how does it work?” Well, keep reading to find out.

    What Is Hyper-Threading Used For?

    Intel refers to simultaneous multithreading (SMT) as hyper-threading. It means splitting each of the physical cores in a CPU into virtual cores known as threads.

    So let’s say a CPU has two cores (i.e. dual-core). In this case, enabling hyper-threading creates four threads, allowing each core to perform two tasks at the same time.

    This process improves the efficiency and boosts the performance of your CPU. You can then run more than a few demanding programs at the same time without experiencing any lag.

    However, it is power-demanding and, as a result, might make your PC heat up.

    Do I Need Hyper-Threading?

    If you normally run applications like browsers and Microsoft Office, then you won’t need hyper-threading (HT). But most video games that are now being released usually do well on hyper-threaded CPUs.

    It helps only if the tasks you perform require it, in which case there can be as much as a 30 percent increase in speed and performance.

    Also, if you have to make a choice between two CPUs where one has more physical cores while the other has fewer but with hyper-threading enabled, it is better to go for the former.

    For instance, if you have an opportunity to use a quad-core (four cores) CPU without hyper-threading enabled, it is preferable to choose it over a dual-core (two cores) hyper-threaded CPU.

    However, if the HT-enabled CPU also has four cores, then the choice will now depend on the kind of apps you run on your computer. If they are not demanding enough to make full use of the virtual cores, then hyper-threading won’t cause a difference in performance.

    How to Enable Hyper-Threading

    Enabling HT requires that you enter your system’s BIOS settings. You can look up how to do so for your device.

    Once you are in BIOS, here’s what you have to do:

    1. Select Processor and then click Properties in the menu that opens.
    2. Turn hyper-threading on.
    3. Select Exit & Save Changes from the Exit menu.

    Keep in mind that not all processors allow hyper-threading. However, some CPU cores are hyper-threaded by default, so you won’t need to trouble yourself with turning on the feature manually.

    To know if it is already enabled, here’s what you have to do:

    1. Press the Windows logo key + R combination on your keyboard to open the Run dialog.
    2. Type ‘CMD’ in the text field and press Enter or click OK to open the Command Prompt window.
    3. Type ‘wmic’ (don’t include the inverted commas) and press Enter.
    4. Type ‘CPU Get NumberOfCores,NumberOfLogicalProcessors /Format:List’ and press Enter.

    The results will show the ‘Number of cores’ and ‘Number of logical processors’ entries. If they both have the same value, it means that your CPU cores are not hyper-threaded. But if the number of logical processors is two times the number of cores, then hyper-threading is enabled.

    We hope you’ve found these hyper-threading technology tips useful.

    How to Do Threading

    Resolve PC Issues with Auslogics BoostSpeed 11

    Besides cleaning and optimizing your PC, BoostSpeed protects privacy, diagnoses hardware issues, offers tips for boosting speed and provides 20+ tools to cover most PC maintenance and service needs.

    Don’t give microblading too much credit. There’s other ways of grooming your brows to get the thick and full arches of your dreams. Eyebrow threading is a cost-effective alternative that’s equally as good at shaping your brows. Plus, it’s much gentler and less painful than other options like waxing.

    With origins in Asia, the treatment has been around for centuries. But, anyone who’s never had their eyebrows threaded before probably wonders how a single piece of string shapes brows and gets rid of stray hairs.

    That’s why we turned to Umbreen Sheikh, founder of Wink Brow Bar to clear the confusion on how eyebrow threading works, what to expect during a threading appointment, and if it’s really less painful than waxing.


    First things first, here’s how eyebrow threading actually works: A piece of thread is taken and twisted on itself as it’s glided along the brow to shape it. The hair is removed from the follicle, but it doesn’t damage the skin. Before the actual threading happens, you’ll be given a consultation to decide on shape. The whole process takes around 15 minutes to complete.


    Since threading only removes the actual brow hair and no skin, it hurts a whole lot less than waxing. This also makes it more precise, so your threading artist will be able to remove finer hairs that usually don’t stick to wax. “While waxing and plucking can often leave unwanted stray hairs around your eyebrows, a threading artist goes through your hair row by row, giving eyebrows a clean and defined shape,” Sheikh explains.

    Threading is also a great option if you have sensitive skin that’s prone to irritation. Sheikh says that it’s a natural, organic technique that doesn’t use harsh chemicals on your face. “People on particular medications or with certain skin conditions may turn to threading to remove their hair because it’s gentler on the skin than some other types of hair removal,” she explains. “For example, some dermatologists recommend that people who use acne medications — including Accutane and topical retinoid creams — choose threading over waxing because the former only affects hair and not the skin underneath.”


    It’s true: threading is significantly less painful than waxing. While it can still be a little bit uncomfortable, there’s little contact with the skin. There’s also no risk of burning or irritating your skin with wax.

    “Your skin may look red, but this redness is from stimulation of the skin, not through excess skin removal that can happen from waxing,” explains Sheikh.

    VIDEO: Beauty School: Feathered Brows


    Much like waxing, threading generally lasts two to four weeks, but this depends on your hair type. However, you may eventually be able to go longer between appointments. “Hair will start to grow back sparse and finer after repeated threading because hair is pulled out at the root, which gets weakened through this process,” says Sheikh.


    Threading costs around the same as waxing and sugaring. The price will vary depending on where you live and the type of salon you go to, but expect to pay $25-$35. At Wink, an appointment will set you back $27.

    If you can’t afford microblading and waxing is just simply too painful, eyebrow threading might just be the brow grooming method for you.

    Updated on April 5, 2020 by Rahul Verma

    Do you want to host your PC performance without investing in buying new hardware? Then consider enabling hyper-threading in Windows 10 PC. Hyper-threading is a new concept where you can boost your computer performance by using each CPU core to launch two threads at the same time. This saves some and boosts performance as your PC will be running twice the speed. So do you want to enable Hyper-threading on your Windows 10 PC? Well, today, we will talk all about the new Hyper-threading features and ways to enable it on your PC. So if if you want to boost your computer CPU to do more tasks at once, this article is just for you.

    With hyper-threading, you can enjoy more processing power. However, the CPU will burn hot, so you need to take care of CPU cooling. Where water cooling is suggested, you can also invest in more CPU fans. Anyways, enabling the hyper-threading feature in windows 10 will give you more power to do heavy software tasks. These might include 3D rendering, encoding, sandboxing, and much more. Hyper-threading is not available on all PC; this is a feature you have to enable from your PC bios settings.

    How to Do Threading

    What is Hyper-Threading in Windows 10?

    Physical cores in a CPU are an essential part of a computer to process information. If you are low on cores, you can’t run your software or your Windows effectively. Therefore, there is the latest technology that splits the physical cores into virtual cores, which the system can use to process information faster because now a single core can process two tasks at once. It is called simultaneous multithreading(SMT) or hyper-threading. SMT boosts the performance of the system. If Hyper-threading is enabled and you are using demanding RAM consuming software applications like Android Studio etc. it may cause your CPU to heat up.

    If you are using a processor low on cores, it is wise to enable Hyper-threading. The system that supports Hyper-Threading is more preferable than physical cores.

    How to Enable Hyper-Threading in Windows 10?

    Not all the system supports HT if you that your system supports HT then go for it, Some system has Hyper-threading enabled by the manufacturer so may don’t have to turn it on manually. Enabling Hyper-Threading will give the necessary performance boost that you needed, but if you are not running any demanding software, you will not notice any difference. However, follow the following steps to know how to enable Hyper-Threading on Windows 10.

    Messing with BIOS settings can ultimately harm your PC. Make sure to follow the below steps carefully. If not, Getdroidtips will not be responsible for your loss

    Go to your system BIOS by pressing the f11/f12 keys, depending on your computer.

    Note: If you already know that Hyper-Threading is enabled on your computer, then you can directly jump to Step 4.

    Select the Processor and click on the Properties, the menu will appear, Turn the Hyper-Threading option on.

    How to Do Threading

    Save the changes and exit from BIOS, reboot to Windows.

    Go to the windows search bar and type ‘CMD’ and click on the command prompt. Run is as cmd administrator.

    How to Do Threading

    Type the command wmic and press Enter.

    After executing the command above type the following.

    How to Do Threading

    After executing the following command, it will show you the numbers of logical processors that are running on your system. If the values of the processors are the same, than the Hyper-Threading is not enabled, but if the result shows two times the number of cores you have, then the Hyper-Threading is enabled.


    Hyper-threading is a relatively new concept, and not all PC support it at this time. So case the option is not available on your PC or laptop, consider an upgrade. Also, if you enable hyper-threading, you need to take care of CPU temperatures. As with hyper-threading enabled, your CPU will work twice as usual, so it will get twice as hot.

    About Rahul Verma

    Rahul is a Computer Science student with a massive interest in the field of Tech and cryptocurrency topics. He spends most of his time either writing or listening to music or traveling un-seen places. He believes that chocolate is the solution to all his problems. Life happens, and coffee helps.

    Editor’s note: This is a guest post from Sebastian Sandersius, a co-founder of Bison Made.

    Like so many honest moments captured by Norman Rockwell, his depictions of this exasperating task are true to our experience. Whether trying to re-attach a button that has popped off, helping grandma thread her sewing machine, or stitching your own wallet, we have all had our frustrations with threading needles. Sometimes we get lucky but then sometimes we get caught up in the iterations of cutting, licking, and coaxing the thread into the eye of the needle.

    Luckily, there is an easier way to thread a needle!

    At Bison Made, we do a lot of hand-stitching to ensure our products are finished with the finest attention to detail. When I train a new employee to sew our products, lesson 1 is the best way to thread a needle.

    Every time I show someone this method of threading a needle, they are astonished at how simple it is — and they take to it very quickly. I personally happened upon this easier method after countless bouts with needle and thread during the early days of developing our products. I scoured the internet and couldn’t find any documentation on this method, so I decided to write it out myself to help make this simple task common knowledge.

    When most people thread a needle, they hold an inch or so of thread between their fingers and try to guide it through the eye of the needle. Leading it directly through is difficult, because the thread is flimsy and floppy. When you inevitably miss, the thread deflects and frays, forcing you to put it in your mouth to reform the fibers before making another attempt.

    The 4-step “pinch the tip” method offers a simple, but significant improvement to this method. Here’s how it’s done:

    1. Hold the thread between your thumb and index fingers.
    2. Pinch down on the thread between your fingers until you can barely see the tip of the thread between your fingertips. With your other hand holding the needle, bring the thread and needle eye together.
    3. Instead of trying to push the tip of the thread through the eye of the needle as in the typical method, here you push the eye of the needle onto the tip of the thread. Your fingertips give the thread support so it will not deflect or fray. Even if the thread is too thick, pinching the tip compresses it into a shape that fits the oblong shape of the needle eye.
    4. With a little practice you should be able to feel with your fingers when the needle is being threaded properly. Keeping your fingers pinched together to support the thread, follow through and push the needle between your fingertips. As you part your fingertips you should reveal a threaded needle.

    When it comes to threading the needle on a sewing machine, this same method should work just as well. The only difference is now instead of holding the needle in your other hand, the needle is fixed in place. Approach the needle eye with the pinched thread tip as shown below.

    This “pinch the tip’” method will work for all types of threads: bonded, unbonded, cotton, polyester, nylon, kevlar, teflon, etc.

    I hope you find this method useful and straightforward so that next time you need to replace a button or patch up a hole, you won’t be frustrated trying to thread your needle. Don’t worry about cutting a clean taper or wetting the thread in your mouth to twist the fibers tight, just pinch the tip.

    Bison Made uses the principles of high-quality craftsmanship when producing quality leather carry goods. Instead of paper patterns and hand cutting, we use high precision cutting dies to create consistent leather components that are hand finished and stitched. We have taken a position that by starting with high-quality raw materials and detailed precision, beautiful and functional works that are designed for life will follow.

    A little pain but a LOT of joy, via some sneezing and skin stretching

    How to Do Threading

    How to Do Threading

    There’s no going back once you’ve popped your eyebrow-threading cherry. Seriously, it’s a one-way ticket to better brows no matter what you’re starting with. If you’re a first-timer to the ancient Indian hair removal technique, let us enlighten you. The cotton-twisting treatment is not at all scary, but because it’s nice to know what to expect, we’ve broken it down below:

    1. Bearable pain. Depending on the therapist/your tolerance/the time of the month threading feels like tweezing multiple hairs at at once. Obviously try not to flinch during it, or you could end up with unwanted bald patches.

    2. One at a time. you’ll be asked to pull your eyelids in opposing directions, so the skin is taught and easy for the therapist to work on. If they assume you’ve been before, expecting you to know what to do, ask and they’ll explain!

    3. Don’t wear lots of eye makeup (for the above reason) or you’ll probably smudge it everywhere.

    4. Uncontrollable side side effects include random sneezing and eye watering – they might literally stream (not from the pain, but the sensitivity).

    How to Do Threading

    5. Be prepared for the therapist to forgo asking what shape you want and to just get to work on instinct. So if you’re growing out your arches, for example, be sure to specify and they should advise you on the best strategy.

    7. They might question whether you want your brows “trimmed or not” after the threading; it’s optional but it makes unruly hairs look much neater. If you have especially fine hair or sparse brows you might want to decline.

    8. Check the results, carefully. When the shaping is done, they’ll show you the results in a handheld mirror and it’s easy to automatically say “great!” – but look closely and ask for tweaks if you’re not 100% happy.

    9. Next comes the option for Aloe Vera gel. Say “yes” to it, it’s rather cooling and soothing plus will help to reduce redness.

    10. The redness. You will temporarily experience rosy skin (some suffer worse than others), so you might not want to go straight out on a date afterwards, but it’ll last an hour, max.

    11. Massage? Depending on where you have your brows threaded, you may get a little Indian-style head massage of joy afterwards making any pain you felt previously melt away.

    How to Do Threading

    12. While the therapist may fill-in your brows with product if you wish, you’ll be told not to apply concealer/foundation afterwards and don’t ignore the advice; makeup could clog the pores left open by the hair removal and cause spots.

    13. What you should focus on instead is the fact you’ll have your best brows EVER. Formerly sparse, overgrown, wonky or wild brows will all see amazing transformations from threading.

    14. Your freshly threaded brows will be easier to fill in yourself, making the morning makeup routine quicker. Bonus.

    15. You’ll also save time on tweezing. There’s no need to pluck between appointments, but when you feel the need to (after 5-6 weeks), save them up for a week and re-book.

    Weave your way through managing and controlling email threads

    • Tweet
    • Share
    • Email

    An email thread is a group of related email messages comprised of replies or forwards of the original email. The messages are most commonly organized in chronological order, and participants may refer to or re-post snippets from earlier parts of the commentary for clarification. This “threaded view,” as it is sometimes called, makes it easier to find related messages.

    How to Do Threading

    Email threading is also called “conversation threading” because it pertains not only to email but also internet forums, newsgroups and other arenas in which users share information and ask questions.

    A thread of emails on a cell phone works the same way as on an email application on a computer. In most cases, grouping emails into a thread are the default behavior, but you can usually edit your email preferences if you would rather view your messages singly.

    Email Threading on an iOS Device

    Apple iOS’s built-in Mail application has several settings controlling email threading. Email threading is turned on by default.

    Go to Settings, and select Mail.

    Scroll down to Threading.

    You have the following options to choose from:

    • Organize by Thread: This setting controls whether threading is used at all in emails. Toggle this off to turn off threading completely. The default is “on” which displays a green icon.
    • Collapse Read Messages: This enables collapsing messages that you’ve already read.
    • Most Recent Message on Top: This is off by default, but it seems like a good option to turn on. If Mail does not display the most recent message at the top, you’ll need to scroll through potentially multiple messages to find the most recent one.
    • Complete Threads: This setting groups email messages into threads even if they originate from another mailbox.

    How to Do Threading

    Toggle on any or all of the options to enable.

    Email Threading on Gmail on an Android Device

    As of Android 5.0 Lollipop, Android devices use Gmail as the default email application, as opposed to the previous Android application called simply Email. In Gmail on Android, email threading (called the conversation view) is turned off by default.

    To control email threading in Gmail on an Android device:

    Open Gmail and click the three-line icon to the left in the Inbox.

    Scroll down past all your folders and select Settings.

    Select General settings.

    Select the checkbox next to Conversation View.

    How to Do Threading

    Return to your email to view your threaded email conversations.

    Email Threading on Windows Mobile Devices

    On Windows mobile devices and phones, email threading — also called the conversation view — is turned on by default. To control these settings:

    Open the Mail app and tap Settings (the gear icon or 3 dots) on the bottom left.

    Select Options from the context right pane that displays.

    Use the toggle Show messages arranged by conversations to turn this option off or on.

    This setting can be controlled for each email account you set up in the Mail app.

    Email Thread Etiquette

    Here are a few pointers when engaging in an email thread, especially if it includes multiple users.

    How to Do Threading

    Western society often looks to the East for their health and beauty secrets — massages, yoga and aromatherapy are just a few practices that have successfully crossed hemispheres [source: WebMD]. One of the latest imports to the West is threading, a hair removal method that is catching the attention of many people, including celebrities.

    By most accounts, threading originated in the Middle East and South Asia. The technique involves using a thin piece of cotton thread and swiping it quickly against the skin to remove hair at the root without taking any skin along. Trained threading practitioners can perform the procedure at an extremely rapid rate, and for many people, threading is less painful than waxing or plucking [source: WebMD].

    Eyebrow threading is most common, but threading can tackle hair on other areas of the face as well. The procedure can only be done on flat surfaces of skin, which is why threading has not replaced waxing as the choice method of hair removal on the bikini line. Like waxing and shaving, however, threading does have the potential to cause infection, so you have to make sure you find a skilled practitioner who uses clean materials.

    The practice of threading has been popular in Indian and Pakistani neighborhoods of the United States for years, but these days it is becoming a lot more mainstream [source: Kazakina]. You can usually find credible threading boutiques in most major cities.

    Read on to learn more about the history of threading, as well as its advantages and disadvantages.

    While threading is still a relatively new hair removal technique in the Western world, it has been used in Eastern countries for centuries. Though the exact origins of the technique are unknown, many believe it originated in the Middle East and South Asia, and then spread to become popular in Far Eastern countries like China [source: James, Kazakina].

    Though eyebrows are the most popular area for threading in the Western world, in India threading was traditionally used to remove hair from other parts of the face as well. The upper lip, chin, sideburns and cheeks were all subject to hair removal by threading, and some salons in the West offer these services in addition to eyebrow threading.

    Currently, aesthetician training does not include learning how to thread. Many owners of threading boutiques are Indian or Middle Eastern and opened their shops because they could not find quality places to have their eyebrows threaded in their cities [source: Kazakina]. In many cases, they were trained in their native countries before bringing the practice to the United States. While learning their craft, threading artists will often practice on an eyebrow-shaped piece of velvet before moving on to human hair [source: Blacksberg]. Depending on a threading artist’s heritage and training, he or she may have slightly different methods, as the practice differs a little bit from country to country.

    Now that you know what threading is and where it came from, read on to find out why it may or may not be the hair removal technique for you.

    Threading may seem like a simple or primitive hair removal method, but experienced technicians make it work beautifully. They begin with a loop of cotton thread that is about the thickness of dental floss [source: WebMD]. Then, they twist the loop to create a series of “knots” in the middle. Finally, practitioners move the twisted area rapidly back and forth across rows of hairs, grasping them at the root and removing them quickly and completely. No chemicals or other tools are needed [source: Facter].

    The benefit of threading that most sets it apart from other hair removal techniques is its precision. While waxing and plucking can often leave unwanted stray hairs around your eyebrows, a threading artist goes through your hair row by row, giving eyebrows a clean and defined shape. Threading only removes hair, not skin, and because it is so exact, it can remove hairs that are finer than those that can be removed by waxing or plucking.

    Threading is also very fast — sessions will only take about 15 minutes of your time, and sometimes even less. It’s also relatively inexpensive. Different practitioners have varying rates, but threading generally costs about the same as plucking and waxing [source: WebMD].

    People on particular medications or with certain skin conditions may turn to threading to remove their hair because it’s gentler on the skin than some other types of hair removal. For example, some dermatologists recommend that people who use acne medications — including Accutane and topical retinoid creams — choose threading over waxing because the former only affects hair and not the skin underneath. Waxing, on the other hand, can remove a layer of skin along with the hair, especially in people whose skin has become more delicate or fragile in response to treatments [source: Kazakina]. Also, allergic reactions to threading are rare, because the only equipment used is a simple cotton string instead of a wax, for example, that could contain irritating substances.

    Though the point is debatable, some say that threading is less painful than waxing and plucking [source: WebMD]. This, again, could be due to the fact that threading has much less contact with the skin than the other procedures. Additionally, many believe that your hair will grow back thinner after multiple threading sessions [source: Blacksberg].

    As good as it may sound, even threading has its downsides. Read on to find out what they are.

    One of the biggest problems in choosing threading as your hair removal technique is its availability (or lack thereof). Although the technique has been gaining popularity rapidly in the western hemisphere, it still may be hard to find reputable threading professionals unless you live in a major city. If you’re looking for a salon that offers threading, searching online is probably the best place to start.

    Once you’ve found a place that performs threading, you should make sure that the salon is credible — just as you would with any beauty procedure. Ask for references from the practitioner, and make sure the salon appears to be a safe and clean environment with new and sterile thread, scissors and brushes. Each threading artist has a different process, but you may be able to determine the quality of the threading based on how long it takes. If a threader only spends five minutes with each client, that’s probably not a good sign, especially because going too quickly can cut your skin [source: Kazakina].

    Though threading involves little contact with the skin and doesn’t include the risk of burns like waxing does, it can still be painful. Your skin may itch a little bit afterward, and you may see some redness, puffiness or changes in pigment for a short while after the procedure. As with waxing or plucking, it’s also possible that after threading you could develop folliculitis, an infection of the hair follicles [source: Mayo Clinic].

    Hair removal techniques may go in and out of fashion to some extent, but threading seems to be a viable option that is here to stay. For more information about hair removal techniques, read on to the next page.

    Though it’s often just the superficial aftermath of hair removal, folliculitis can involve more serious side effects. It usually consists of small white pimples around the infected hair follicles and will go away on its own, but sometimes folliculitis can result in permanent hair loss or scarring [source: Mayo Clinic]. It’s mostly just itchy and uncomfortable, but you should consult your doctor if it reoccurs or is extremely painful.