Life hack

How to hang things on a cement wall

Cinder block is a durable structure product, however it can provide a minor style difficulty when it’s time to customize an area. Hanging images on a concrete block wall is not as hard as it may appear. With the best items or a bit of resourcefulness, you can hang art work without drilling into the wall.

Adhesive Wall Hooks

If the cinder block wall is painted and has a reasonably smooth– not permeable– surface, hanging images might be as easy as setting up detachable adhesive wall hooks. Damage-free adhesive photo wall mounts can be found in a variety of sizes and designs. Tidy the wall with rubbing alcohol, then peel the paper support from the adhesive hook and press in location for 30 seconds. Enable an hour for the adhesive to set prior to hanging the photo. Weight limitations differ by item, with the greatest picture-hanging hooks supporting an optimum of 8 pounds.

Hardwall Hangers

Hardwall wall mounts are photo hooks planned particularly for hard surface areas like cinder block and brick walls. The plastic hook connects to the wall with little metal nails that pound into the wall surface area with a hammer. When they are no longer required, these hooks can support up to 25 pounds and can be pried from the wall.

Masonry Nails

This is a reputable old-school alternative. Masonry nails are made from solidified steel to withstand flexing when driving into concrete, cinder block, physical. They are available in a couple of various designs and a variety of sizes. All masonry nails are strong enough for photo hanging, however they need to enter into the wall 1 1/4 to 1 1/2 inches deep for optimum holding power. Select the design based on look if the nails will be exposed. Requirement masonry nails have a thick, fluted shank and a dull gray surface. “Intense” masonry nails frequently have smoother shanks and a glossy silver color. Cut or flat masonry nails appear like old-fashioned cut nails for wood; you may utilize these for a rustic touch.

Driving Masonry Nails

As you may anticipate, nailing into masonry is much more difficult than entering into wood, however the fundamental action is the very same. Follow these pointers for the very best outcomes:

  • Utilize the heaviest hammer you have. A framing hammer, bricklayers hammer and even a little sledge works much better than a basic surface hammer.
  • Constantly use shatterproof glass: the solidified steel nails can eject fragments of metal or break off little bits of masonry grit and send it flying towards you.
  • Drive the nail into a mortar joint, not into a block, which can break.
  • Keep the nail and hammer as straight as possible, and struck the nail like you imply it; tentative taps with the hammer are most likely to chip the mortar, developing a divot that will not hold the nail.
  • Once the nail is set, driving it even more is quite simple, however once again, keep the hammer directly so you do not require the nail sideways– another method to chip the mortar.


When set up,

Examine the weight of your photo prior to choosing on a hanging service to guarantee that the photo will stay firmly in location.

If you had actually asked me what I believed would be challenging about residing in Italy prior to we moved here, I would’ve stated something like, “Getting too fat from consuming a great deal of pasta,” or “finding out how to drive in what is basically an everyday commute of Mario Kart” (all things that ended up being legitimate issues). What I did not anticipate would be hard, amongst numerous others thing (i.e. how to pee in a squatty potty or how to get ordinary jobs done around the Italian nap schedule), was hanging shit on walls.

Italian houses, a minimum of where we reside in northern Italy, are made from concrete, not the soft, friendly sheetrock walls from back house. This does not appear like a concern, till you go to hang a lovely photo of you and your hubby on your honeymoon, go to drive a nail into the wall, and are satisfied with the wall collapsing around your now bent-beyond-usability nail. When you attempt to hang things up the American method into concrete walls– the wall actually simply falls apart, this is what takes place.

Since I have a hostility to white walls and Pinterest imagine gallery walls on every bare surface area, this was not going to do. Throughout the years, I have actually sharpened a couple of methods to hang things on these walls– whatever from small calligraphy prints to huge maps to heavy racks filled with books. And since this is a concern I’m continuously asked from visitors of my house, who have actually satisfied the faults of their concrete walls with frustrating outcomes– well, I wished to assist y’ all treat the white wall blues, too.


for unframed things

for light things

for heavy things

  • screw
  • anchor
  • drill (hammer drill works best)
  • masonry drill bits
  • screwdriver or screwdriver bit for drill
  • optional: wall spackle/putty & spackling knife, plus pliers if you ruin for the anchors


Washi tape pointers: I like to purchase ornamental washi tape, however since concrete walls are cold and textured, it can often take some experimentation to discover some that will really stick. Function over kind is often essential here– discover a brand name you like and actually persevere.

Tips for hanging light things: When I state small nails, I imply actually small nails. The issue with pounding nails into the concrete walls is that they collapse away, however the tinier– and particularly much shorter– the nail is, the less most likely you’ll have an issue given that you hammer less. You can likewise discover what we call “concrete nails” in the hardware shop, which are plastic hooks with a small nail that you drive through it. The only drawback I have actually discovered to this is that the hooks frequently aren’t extremely practical, and can’t actually hang the majority of photo frames up. The concrete nails can really hold rather heavy things, however all the best discovering a hook that will clip into the back of anything you own.

For heavy things, from mirrors to big canvases to racks:

  1. For much heavier things, the anchor + screw technique is your rescuer. Hammer drills are best since they’re more effective, any drill will do– nevertheless, you will require masonry drill bits to get the task done, and if you do not have a hammer drill, a little bit of muscle.
  2. When you have actually discovered the area on the wall that you require to drill into, choose the appropriate bit, put it into your drill and start drilling into the wall. This procedure might take a while– and if you see orange dust coming out of the wall, this is completely regular. You might likewise discover that you need to drill through 2 layers, with a difficult layer about midway through your task. This is likewise regular.
  3. Drill the hole so it is big enough to easily place your anchor– the anchor needs to be tight, however you should not need to hammer it in too tough, or it might collapse. If you require to gently hammer the anchor into position, it’s great. If you hammer too tough and harm the anchor by squashing it, that’s fine– simply pull it out with needle-nose pliers, make your hole a little bigger, and insert another anchor.
  4. If you inadvertently drill your hole too big– do not fret,

  5. This takes place frequently with concrete, given that it collapses away so quickly. You can utilize wall spackle around your anchor and put it into the wall that method– simply ensure it dries prior to you place the screw.
  6. Utilizing the screw or a screwdriver bit on your drill, screw the screw into location in the anchor, leaving a bit coming out of the wall so you have a surface area on which to hang your image. Put the bracket in between the screw and the anchor and then drill the screw into location if you are hanging a shelving bracket.
  7. If you desire to eliminate the screw (or even a nail!),

  8. from the wall, loosen the screw, eliminate the drill bit with needle-nose pliers, and fill the hole with wall spackle with a putty knife.
  9. Hang your art work and go back in affection!

Having a concrete wall frequently makes it hard for us to choose to renovate it. There’s a basic sensation that, if we mess it up, then it is messed up. Or possibly you do not understand which tools work best for these walls.

When we talk about hanging images,

It is especially made complex. We faced this predicament back in the house, however we have actually discovered different approaches that work excellent for hanging images on a concrete wall.

We’ll share these approaches with you to assist you have those stunning memories on your house, right where you can see it whenever you and your household go into your home.

3 Many Typical Method to Hang Pictures on Concrete Wall


Technique 1: Utilizing Adhesive Hooks

How to hang things on a cement wall

While the majority of adhesive hooks are strong enough to keep your images on the wall, you should purchase a couple efficient in holding about 8 pounds, or 3.6 kg of weight.

Since they do not need we drill holes in the wall,

The adhesive hooks are an impressive service. Rather, they have adhesive supports, which can stick strongly to the wall. In either case, you should understand the weight of the item or the photo you wish to hang to pick the very best adhesive hooks.

For much better assistance, you might utilize 2 hooks, or as much as you think about required. It will all depend upon the weight of the frame, which is various for every single case.

  • Preparing the Wall

If you wish to get a company hold, you should clean up the wall utilizing materials like alcohol. Utilize it with a paper towel or a rag to clean up the location, and leave it devoid of particles or other undesirable aspects that might obstruct.

Likewise, the adhesive hook benefits from a tidy surface area offering a firm assistance in the wall.

If you do not have alcohol close by, then utilize any compound you consider it will keep the wall tidy. Soapy water is an excellent option, however any supply efficient in cleaning up the wall will get the job done. Make certain the area is dry after the clean-up.

  • Marking the Areas

Utilizing a little pencil, mark the precise location where you will be setting up the hook. It is much better to prevent errors while doing this operation, which is why you require to be as accurate as possible.

  • Sticking it to the Wall

Eliminate the plastic covering the adhesive and press it to the wall for about 30 seconds.

After removing the paper lining at the back of our hook, we’ll require to line the hook directly and push it with sufficient strength as long as required. For the majority of cases, 30 seconds suffice, and you should launch it later.

  • Let the Adhesive Dry

For the next 30 to 60 minutes we’re going to let the adhesive do its task and get a strong grip to the wall. Do a little test by hanging particular products on the hook as soon as you consider it is all set.

If by any opportunity your product is much heavier than anticipated, and it rips the hook off the wall, then you’re going to require other hooks efficient in standing up to a much heavier weight.

Technique 2: Utilizing Hardwall Hangers

How to hang things on a cement wall

Get hardwall wall mounts efficient in withstanding approximately 25 pounds, or 11 kg. They are created to work well with concrete or brick walls, and hanging images on them is fast and simple. The setup procedure is quickly, which indicates you it will be up and all set to hold your frames in little to no time at all.

These wall mounts consist of tough pins that anchor its base in the wall.

You’ll require 2 wall mounts for much better assistance and a hammer.

  • Marking the Area

Mark the ideal area on the wall where you mean to set up the wall mount. In case you chose to utilize 2 wall mounts, you should determine the range in between them, and ensure it matches the appropriate width of your photo.

  • Setting Up the Hangers

Location the wall mount on the significant area, and hold it still with your hand while you utilize the other one to nail the 4 pins in the wall, however just midway.

Then, launch it to inspect whether it keeps its position, and if it is at the appropriate position. After validating that it is where you desire it, continue hammering the pins.

Throughout the very first stage, you may wish to hammer the pin carefully. It will permit you to eliminate it rapidly if you’re not delighted with the outcomes, however it is likewise a safe method to do it while keeping your fingers safe.

If it is directly,

Hang your preferred photo and check. Do not hesitate to make any modification you think about required. See the outcome of your tough work: a lovely photo illustrating an amazing minute hanging on the wall.

Technique 3: Utilizing Masonry Anchors

How to hang things on a cement wall

The anchor’s style functions plastic the majority of the time, and it consists of the required screws you should place in it. You will still require a drill and its particular masonry bit of the very same size of the anchor.

If you wish to choose a winner, you might get among the masonry packages. These sets consist of the anchor, all the screws, and an accurate masonry bit. Once again, for much better assistance, you might utilize 2 anchors.

  • Utilizing the Correct Tool

Up until now, we have actually prevented doing significant damage to the wall, however for this technique, we’re going to need to do it.

Utilizing the hammer drill, begin dealing with the wall till you get the outcomes you desire. The routine electrical drill works well for this job, however utilizing a hammer drill is much faster and easier.

  • The Drilling Process

Obviously, it is much better to mark the area prior to beginning your work since it offers you a much better concept about where to drill.

After that, put the bit over it, hold it tight, and begin working. Individuals advise drilling at a sluggish speed for much better outcomes, however it is completely approximately you to choose what works much better for your wall.

  • Positioning the Anchor In the Hole

Tap both of your anchors in the hole you produced. Do it till the wall mount is flush with the wall. You desire it to be as fit as possible, however not excessive since it will make complex the hammering procedure.

If you have a difficult time tapping the anchor, then it may be much better to broaden the hole a bit, rather of pressing it.

  • Setting Up the Screw

Put the screw in the anchor to protect its location. For this job, you can utilize a screw or a screwdriver bit from your drill. It works in either case, and you should stop your operation right prior to it is flush. Doing it in this manner enables you to utilize the area for changing the wire of the photo your hanging.

And there’s that. Very little else to do other than to enjoy your brand-new hanging photo on the wall.

Last Words

We have actually gone through 3 various approaches for hanging images on the concrete wall. Each procedure might share resemblances with the other, however everyone has a preferred method of doing it. Eventually, choosing which one is much better for your home is a job that trusts you, and no one else.

Things You’ll Require

Hook and loop tape

Cement drill bit

How to hang things on a cement wall

Cement walls can provide your house a contemporary feel you might discover appealing, however cement walls can make it hard to hang a wall or a photo design. Do not let concrete walls stop you from hanging your wall design. You do not need to cope with bare walls simply to delight in the feel of genuine cement walls in your house. With unique products, it is possible to hang products on cement walls.

Products Under 10 Pounds

Action 1

Purchase hook-and-loop tape. Hook-and-loop tape utilizes unique innovation (typically described by the popular trademarked name, Velcro) to hang your wall decors without drilling holes. Examine the product packaging to guarantee you acquire a hook-and-loop-tape item whose weight limitation surpasses the weight of the product you mean to hang.

Action 2

Wash the cement wall with soap and water. This will eliminate any gunk that might disrupt the sticking procedure. Leave the wall to dry prior to you try to hang your wall design.

Action 3

Pull the protective support off the versatile side of the hook-and-loop tape. Connect the strip of hook-and-loop tape to a smooth part of the back of product you want to hang (typically speaking, you would attach the tape towards the upper part of the product). Smooth the strip out thoroughly.

Action 4

Connect the stiff part of the hook-and-loop-tape combination to the side you currently connected to the product you will hold on the wall– the “hooks” part attaching to the “loops” part. Peel the exposed protective support off the stiff part of the hook-and-loop tape.

Step 5

Stick the product onto the cement wall and hold it there for a straight minute. This offers the adhesive support on the hook-and-loop tape time to abide by the wall.

Action 6

Move your hands far from the product gradually. If the hook and loop tape stops working and the product desires to move down, all set yourself to capture the product. Eliminate it from the wall and include more hook-and-loop tape areas if it looks like it might fall.

Products Over 10 Pounds

Action 1

Purchase a growth hook ranked for the weight of the product you want to hang.

Action 2

Hold your growth hook versus the cement wall at the height you want to hang your wall accessory. Take a pencil and fill in the holes on the anchor where you will place the screws.

Action 3

Pull your growth anchor far from the wall. Drill starter holes into your cement walls utilizing a cement drill.

Action 4

Location your growth hook over the starter holes you produced. Line the anchor up over the starter holes you produced. Drill the screws consisted of with the growth anchor straight into the starter holes.

Step 5

Dust the wall off after you set up the anchor.

Action 6

Hang your wall accessory onto the growth anchor. Tilt it to the right or the left till the wall accessory hangs directly.