Categories
Life hack

How to manage hibernate mode in windows 7

original title: Waking windows 7 from sleep

Quite often when I go to wake Windows 7 from sleep mode, My computer refuses to wake by simply moving the mouse. I have to hold the power button till the computer shuts off, than press the power on again. Other times when I put it into sleep mode it wakes minits latter. I have set all swithes to never turn off hard drive and never auto put computer into sleep mode.

Ensure that to enable the option of Allow this device to wake the computer for the Mouse and check if it helps, to do that follow the below provided steps.

1. Click on start.

2. Now type devmgmt.msc in the search files and programs field.

3. At the device manager screen, right click on the Mice and other pointing devices.

4. Select properties.

5. Now you have to click on power management tab.

6. Now check mark Allow this device to wake the computer.

Also Update the display adapters on your computer, to do that follow the steps below.

a. Update your video card, If you all ready have the latest drivers, uninstall and reinstall them, as drivers can quite easily become corrupted.

b. Here are the steps to uninstall the display drivers from Device Manager:

1. Open Device Manager by clicking the Start button, clicking Control Panel, clicking System and Maintenance, and then clicking Device Manager.

2. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

3. On the Device Manager window, look for the Display adapter and let us know if you see any yellow exclamation mark in front of the Device.

4. Right click on the Device and select Uninstall.

5. Re-install the latest Display drivers from the Manufacturer’s website.

6. Access the link below to know about how to get into Device Manager:

Now restart your computer and check for the issue.

You can also download the driver for the mouse from manufacturer’s website and install it.

Thanks and Regards:
I. Suuresh Kumar- Microsoft Support.
Visit our Microsoft Answers Feedback Forum and let us know what you think.

How to manage hibernate mode in windows 7

Windows 7 doesn’t have a Hibernate option out of the box, as you might have noticed. However, you can bring it out of hiding and make it an option for you when powering down your PC. It takes a few more steps compared to enabling Hibernate mode in Windows 8, but it can be done. Here’s how.

Editor Note: Since approximately half of the world’s computer users are still running Windows 7 and haven’t have upgraded to Windows 8.1, we’ve decided to start revisiting Windows 7 in this new series of articles on Fixing Windows 7. We’ll be covering some of the biggest Windows 7 annoyances and how to fix them. Also, if we have helpful tips or solutions that we never got around to, we’ll get those up as well. This week is how to uncover the hidden Hibernate option.

Update: If you skipped Windows 8 and upgraded directly to Windows 10, you saved yourself a lot of problems, so good on ya! The same power options exist on it as well. Make sure to check out our article on how to enable Hibernate on Windows 10 and our guide on how to shutdown, restart, hibernate, or sleep Windows 10.

Enable Hibernate in Windows 7

First click Start and Type: power options in the search box and hit Enter. Next in the right-hand pane select Change when the computer sleeps and then click Change advanced power settings.

In the Power Options window, expand Allow hybrid sleep and switch it to Off and click OK.

How to manage hibernate mode in windows 7

Now you’ll have your Hibernate option listed on the power button.

How to manage hibernate mode in windows 7

After enabling Hibernate, it will also show up in other locations, for example when you use the keyboard shortcut Alt + F4 to get the Shut Down Windows options.

How to manage hibernate mode in windows 7

This adds the Hibernate feature and doesn’t replace anything, so you’ll still have the Restart, Log off, and Sleep options too. If you’re curious about the difference is between Sleep and Hibernate, check out our article: Understanding PCs and Devices: Sleep versus Hibernate.

If you don’t use the Hibernate option in Windows 7, you can save some disk space by disabling it. Here we will look at a few different ways to manage hibernate options in Windows 7.

Note: Hibernate mode is not an option on systems with 4GB of RAM or more.

Enable or Disable Hibernate Through Command Prompt

Using the Command Prompt might be the easiest way to enable or disable Hibernation. Click on Start and type CMD into the search box and it will be listed under programs. Right-click on the icon and select Run as administrator.

How to manage hibernate mode in windows 7

The Command Prompt opens and you will use the following to enable Hibernation.

How to manage hibernate mode in windows 7

Type in the following to disable hibernation.

How to manage hibernate mode in windows 7

Manage Hibernation Through Control Panel

Click on Start and open Control Panel then click on Power Options.

How to manage hibernate mode in windows 7

On the left side click on Change when the computer sleeps.

How to manage hibernate mode in windows 7

Now click on Change advanced power settings.

How to manage hibernate mode in windows 7

In the Advanced Power Options window expand the Sleep tree then expand Hibernate after and change the minutes to zero to turn it off. Or you can specify the amount of minutes you want to pass before it goes into hibernation. After you’ve made your selection click Apply and Ok then close out of the remaining screens.

How to manage hibernate mode in windows 7

Where is Hibernate?

What if you try the command line option to turn it on and Hibernate mode still isn’t available? Then what you’ll want to do is disable Hybrid Sleep by expanding Allow hybrid sleep and turning it Off.

How to manage hibernate mode in windows 7

Now you should have Hibernate and Sleep as part of the power options in the start menu and will also be an option when you hit Ctrl+Alt+Del.

How to manage hibernate mode in windows 7

Disable Hibernate Through Regedit

Note: Changing registry values can cause your computer to become unstable or stop functioning and is only recommended for experienced users.

Now that the disclaimer is out of the way…you might want to completely disable Hibernate mode through a registry edit. Open the Registry and browse to HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ Power and change both HiberFileSizePercent and HibernateEnabled value data to zero. After you’ve made the changes close out of the Registry Editor and restart the machine.

How to manage hibernate mode in windows 7

If you always turn off your computer or never do, you can disable the Hibernate mode to gain a bit of extra hard disk space. On our Windows 7 (32-bit) machine with a 300GB hard drive, disabling Hibernation gained us just over 3GB of more disk space. That may not seem like much especially with today’s high capacity drives, but if you don’t need Hibernation, why not reclaim that space?

This article describes how to disable and then re-enable hibernation on a computer that is running Windows.

Original product version: В Windows Server 2019, Windows 10 – all editions, Windows Server 2016, Windows 7 Service Pack 1, Windows Server 2012 R2, Windows Server 2008 R2 Service Pack 1
Original KB number: В 920730

You may lose data if you make hibernation unavailable and a power loss occurs while the hybrid sleep setting is turned on. When you make hibernation unavailable, hybrid sleep does not work.

How to make hibernation unavailable

  1. Press the Windows button on the keyboard to open Start menu or Start screen.
  2. Search for cmd. In the search results list, right-click Command Prompt, and then select Run as Administrator.
  3. When you are prompted by User Account Control, select Continue.
  4. At the command prompt, type powercfg.exe /hibernate off , and then press Enter.
  5. Type exit, and then press Enter to close the Command Prompt window.

How to make hibernation available

  1. Press the Windows button on the keyboard to open Start menu or Start screen.
  2. Search for cmd. In the search results list, right-click Command Prompt, and then select Run as Administrator.
  3. When you are prompted by User Account Control, select Continue.
  4. At the command prompt, type powercfg.exe /hibernate on , and then press Enter.
  5. Type exit, and then press Enter to close the Command Prompt window.

More information

The Hiberfil.sys hidden system file is located in the root folder of the drive where the operating system is installed. The Windows Kernel Power Manager reserves this file when you install Windows. The size of this file is approximately equal to how much random access memory (RAM) is installed on the computer.

The computer uses the Hiberfil.sys file to store a copy of the system memory on the hard disk when the hybrid sleep setting is turned on. If this file is not present, the computer cannot hibernate.

Reference

To add the Hibernate option to Start menu, see the Hibernate section of Shut down, sleep, or hibernate your PC.

If you don’t use the Hibernate option in Windows 7, you can save some disk space by disabling it. Here we will look at a few different ways to manage hibernate options in Windows 7.

Note: Hibernate mode is not an option on systems with 4GB of RAM or more.

Enable or Disable Hibernate Through Command Prompt

Using the Command Prompt might be the easiest way to enable or disable Hibernation. Click on Start and type CMD into the search box and it will be listed under programs. Right-click on the icon and select Run as administrator.

How to manage hibernate mode in windows 7

The Command Prompt opens and you will use the following to enable Hibernation.

How to manage hibernate mode in windows 7

Type in the following to disable hibernation.

How to manage hibernate mode in windows 7

Manage Hibernation Through Control Panel

Click on Start and open Control Panel then click on Power Options.

How to manage hibernate mode in windows 7

On the left side click on Change when the computer sleeps.

How to manage hibernate mode in windows 7

Now click on Change advanced power settings.

How to manage hibernate mode in windows 7

In the Advanced Power Options window expand the Sleep tree then expand Hibernate after and change the minutes to zero to turn it off. Or you can specify the amount of minutes you want to pass before it goes into hibernation. After you’ve made your selection click Apply and Ok then close out of the remaining screens.

How to manage hibernate mode in windows 7

Where is Hibernate?

What if you try the command line option to turn it on and Hibernate mode still isn’t available? Then what you’ll want to do is disable Hybrid Sleep by expanding Allow hybrid sleep and turning it Off.

How to manage hibernate mode in windows 7

Now you should have Hibernate and Sleep as part of the power options in the start menu and will also be an option when you hit Ctrl+Alt+Del.

How to manage hibernate mode in windows 7

Disable Hibernate Through Regedit

Note: Changing registry values can cause your computer to become unstable or stop functioning and is only recommended for experienced users.

Now that the disclaimer is out of the way…you might want to completely disable Hibernate mode through a registry edit. Open the Registry and browse to HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ Power and change both HiberFileSizePercent and HibernateEnabled value data to zero. After you’ve made the changes close out of the Registry Editor and restart the machine.

How to manage hibernate mode in windows 7

If you always turn off your computer or never do, you can disable the Hibernate mode to gain a bit of extra hard disk space. On our Windows 7 (32-bit) machine with a 300GB hard drive, disabling Hibernation gained us just over 3GB of more disk space. That may not seem like much especially with today’s high capacity drives, but if you don’t need Hibernation, why not reclaim that space?

How to manage hibernate mode in windows 7

You’re likely reading this because you noticed a gigantic hiberfil.sys file sitting on your system drive and you’re wondering if you can get rid of it to free up some space. Here’s what that file is and how you can delete it if you want to.

What Is the hiberfil.sys File?

Depending on the version of Windows you’re using, you have several options for conserving power when you’re not using your PC. Obviously, you can just shut it down. But, you can also send it into a sleep or hibernate mode, where it uses dramatically less power but is still available quickly when you need it. Sleep uses just enough power to maintain the information in your PC’s memory. Hibernate conserves even more power by writing the information in memory out to the hard drive and essentially shutting down—the benefit being that bringing your PC back up is much quicker than bringing it up from a fully off state. That’s where the hiberfil.sys file comes in—Windows writes the information in memory to that file.

While we recommend using sleep or hibernation instead of shutting down your PC in most cases, we understand that many people simply prefer shutting down. In that case, disabling hibernate mode on your PC will allow you to delete that file and reclaim valuable disk space. And the file can use up quite a bit of space. How much depends on the amount of memory installed in your PC. In our example, the hiberfil.sys file is using a whopping 13 GB of disk space.

How to manage hibernate mode in windows 7

Disable Hibernate Mode in Windows 10, 8, 7, or Vista

The technique for disabling hibernate mode is pretty much the same in Windows 10, 8, 7, and Vista. You’ll need to use the Command Prompt in administrative mode to get it done, but it’s just one simple command. Disabling hibernate mode automatically deletes the hiberfil.sys file.

Open Command Prompt by first hitting Start and typing “command prompt.” When you see the Command Prompt app pop up, right-click it, and then choose “Run as administrator.”

How to manage hibernate mode in windows 7

At the prompt, type the following command and then press Enter:

How to manage hibernate mode in windows 7

This command immediately disables hibernate mode, so you’ll notice it’s no longer an option from your shut down menu. And, if you visit File Explorer again, you’ll see that the hiberfil.sys file has been deleted and all that disk space is yours once again.

How to manage hibernate mode in windows 7

If you change your mind and would like to enable hibernate mode again, just revisit the Command Prompt and use this command:

The Hibernate command should be available to you once again and Windows will recreate the hiberfil.sys file.

Disable Hibernate Mode in Windows XP

Disabling hibernate mode in Windows XP is a little different than in later versions of Windows. First, head to Control Panel > Power Options. In the Power Options properties window, switch to the “Hibernate” tab and disable the “Enable hibernation” option.

There are many different ways that people manage their computers when they are done using them. Some people like to turn off their computers by choosing to shut it down, while others prefer to put the computer in “Hibernate” mode so that it does not need to fully boot the next time it is turned on. Regardless of your preference, you may not like what the default power button action does in Windows 7. Fortunately this is something that you can change on your computer, so continue reading below to learn how to change what the power button does in Windows 7.

Are you interested in learning more about Windows 8? This operating system provides a lot of improvements and changes over Windows 7 and could help to improve your experience with your computer. Read more about Windows 8, including the cost of upgrading and the new features included in the operating system.

How to Change Power Button Settings in Windows 8

There are several different options from which you can choose for defining the power button action. These include Switch user, Log off, Lock, Restart, Sleep, Hibernate, and Shut Down. Once you define the setting using the procedure outlined below, the change will take effect immediately. Note that you can always choose from the full set of options by clicking the arrow to the right of the power button on the Start menu.

Step 1: Right-click the toolbar at the bottom of the screen, then click Properties.

Step 2: Click the Start menu tab at the top of the window.

Step 3: Click the drop-down menu to the right of Power button action, then click the option you want to use for the power button in the future.

Step 4: Click the Apply button at the bottom of the window, then click the OK button.

There are a lot of other changes that you can make from the menu as well. For example, you can choose to move the taskbar to a different location on the screen, or you can move it back to the bottom if it has accidentally been moved to the top or the side.

Share this:

  • Facebook
  • Twitter
  • LinkedIn
  • Pinterest
  • Reddit

Related

How to manage hibernate mode in windows 7

Disclaimer: Most of the pages on the internet include affiliate links, including some on this site.

Question

We have domain Windows Server 2012 R2 with domain environment.

For Bitlocker implementation as phase i want to disable sleep mode and enable hibernate for all laptops across the organization and this tasks can be easily achievable through group policy.

I have two different link for configuring on single device which is confusing me which one is correct also i am not able to find the setting to deploy it from group policy.

Please help and correct me in this regard.

i just make changes in preferences

All replies

To enforce the settings, we should configure them under Computer Configuration – Policies – Administrative Templates – System – Power Management.

Detailed settings are similar as Rob said:

  • Disable Sleep mode:
    Disable policy: Allow standby states(S1-S3) when sleeping (Plugged in/ on battery).
  • Enable Hibernate time out:
    Enable policy: Specify the system hibernate timeout (plugged in/on battery) .
  • Change the power button action:
    Similar as Rob said , but depends on your needs.

If there is anything else we can do for you, please feel free to let us know.

Last Updated on September 13, 2019 by admin 242 Comments

In Windows XP, enabling Hibernate option was a straightforward task. One could navigate to Control Panel, Power Options and then Hibernate tab to enable or disable Hibernation feature. But in Windows 7, we have to follow a different approach to do the same job.

What is the Hibernation feature in Windows?

If you are not aware of the Hibernate feature, Hibernation is a power-saving state designed primarily for laptops (works great on desktop computers as well). While sleep mode puts your work and settings in memory (RAM) and draws a small amount of power, hibernation puts your open documents and programs on your hard disk and then turns off your computer. Of all the power-saving states in Windows, hibernation uses the least amount of power. On a laptop, use hibernation when you know that you won’t use your laptop for an extended period and won’t have an opportunity to charge the battery during that time.

How to manage hibernate mode in windows 7

Enable or disable hibernation in Windows 7

So if you are going to use this feature, then you need to enable it by doing a simple procedure as mentioned below:

Step 1: Open Command Prompt with Administrator rights. To open Command Prompt, type CMD in Start menu and then hit Ctrl + Shift + Enter to open the Command Prompt with Admin rights.

Step 2: Next, type the below command and hit enter:

powercfg /hibernate on

Step 3: Type exit and hit Enter key to close the Command Prompt.

Step 4: If you can’t see the Hibernate option in the Start menu, then continue with the following tasks:

A. Type Power Options in Start menu and hit enter.

B. In the left pane, open the link labeled Change when the computer sleeps and then open the link Change advanced power settings.

How to manage hibernate mode in windows 7

C. Under the Advanced Sleep options, expand the Sleep tree and turn off Hybrid Sleep.

D. Now go back to the Start menu to see the new Hibernate entry. That’s it!