L’une des choses les plus difficiles à faire quand on passe de Mac à Windows, ou de Windows à Mac est couper / copier / coller . Sur un Mac, ceci est accompli en utilisant la combinaison “Command +”, tandis que sous Windows, c’est “Control +”.
Si vous n’utilisez pas un clavier de marque Apple, tel qu’un clavier avec une touche Windows, alors cela va doubler comme la touche “Command” sur votre Mac, cependant, Windows utilise encore “Control” comme modificateur, alors que vous pouvez avoir l’habitude d’utiliser “Command” sur votre Mac, sur Windows, tout ce qui est typiquement ouvert est le Start. menu.
Aujourd’hui, nous voulons vous montrer comment effectuer un remappage simple à la fois sur votre Mac et sur votre machine Windows afin de ne pas vous couper / copier / coller. Bien sûr, cela peut être appliqué à tous les autres raccourcis clavier qui utilisent aussi “Command” ou “Control”.
Sur un Mac, c’est facile. Nous avons beaucoup parlé de la façon dont le clavier Mac est configurable et comment vous pouvez changer et attribuer des raccourcis clavier pour un grand nombre d’éléments. Ce n’est pas différent avec les touches de modification. Ouvrez les préférences du clavier et cliquez sur le bouton “Modifier les touches . “
Vous pouvez modifier les quatre touches de modification suivantes: “Verr Maj”, “Contrôle”, “Option” et “Commande”.
Pour nos besoins , nous allons seulement modifier “Control” à “Command” et “Command” à “Control”.
Maintenant, chaque fois que nous voulons utiliser un raccourci clavier tel que couper, copier, coller, ou tout ce qui était nécessaire auparavant la touche “Command”, nous utiliserons plutôt “Control” pour l’exécuter.
Windows ne fournit pas un moyen simple de remapper les clés sans modifier le registre, mais vous pouvez utiliser des tierces parties logiciel qui fera rapidement le travail. Nous recommandons SharpKeys, qui fournit une interface facile à utiliser et qui raccourcit tout.
Pour remapper votre clé “Control” sur votre touche “Windows”, le plus simple est de cliquer sur le bouton “Type Key”. .
D’abord, appuyez sur le bouton “Control” gauche dans la colonne de gauche, puis appuyez sur la touche “Windows” dans la colonne de droite.
Vous voyez maintenant que nous avons remappé le bouton “Control” gauche la touche “Windows”.
Nous n’avons toujours pas terminé. Même si la touche “Control” a été remappée pour agir comme notre touche “Windows”, nous devons encore remapper la touche “Windows” à la touche “Control”. Sinon, vous n’aurez que deux clés qui agissent comme la touche “Windows”
Le résultat final ressemblera à la capture d’écran suivante:
La dernière chose à faire est de cliquer sur le bouton “Ecrire au registre”. Vous serez obligé de vous déconnecter de votre compte ou de redémarrer le système.
Une fois que vous vous déconnectez / connectez ou redémarrez, vos nouveaux mappages de touches entreront en vigueur et vous pourrez passer de Mac à PC ou PC à Mac sans gaffes de raccourcis clavier ennuyeux.
Vous pouvez utiliser SharpKeys pour remapper toutes les touches que vous voulez, donc s’il y a d’autres façons de rendre votre expérience de saisie Windows plus facile, alors vous savez maintenant comment faire. Rappelez-vous, une fois que vous remappez “Contrôle” sur “Windows”, tous les raccourcis qui en dépendent dépendent de la touche “Windows”.
Si vous avez des questions de commentaires, vous aimeriez contribuer à cet article , laissez vos commentaires dans notre forum de discussion.
La sécurité des routeurs grand public est plutôt mauvaise. Les attaquants profitent des fabricants de badauds et attaquent de grandes quantités de routeurs. Voici comment vérifier si votre routeur a été compromis. Le marché des routeurs domestiques ressemble beaucoup au marché des smartphones Android.
Lorsque vous tentez de créer des sauvegardes de copie de fichiers simples sous Windows, les fichiers verrouillés l’opération. Si le fichier est actuellement ouvert par l’utilisateur ou verrouillé par l’OS lui-même, certains fichiers doivent être complètement inutilisés pour être copiés. Heureusement, il existe une solution simple: les clichés instantanés.
Matt Klein has nearly two decades of technical writing experience. He’s covered Windows, Android, macOS, Microsoft Office, and everything in between. He’s even written a book, The How-To Geek Guide to Windows 8. Read more.
Windows 10 is out, so we’re going from our Macs to PCs with daily regularity. While there are quite a few differences between them, nothing trips us up more than cut/copy/paste. Here is how to remap cut/copy/paste so they’re the same on both platforms.
One of the hardest things to get used to when we go from Mac to Windows, or Windows to Mac is cut/copy/paste. On a Mac, this is accomplished using the “Command +” combination, while on Windows it’s done through “Control +”.
If you aren’t using an Apple-branded keyboard, such as one with a Windows key, then that will double as the “Command” key on your Mac, however, Windows still uses “Control” as its modifier so while you may be used to using “Command” on your Mac, on Windows all that will typically do is open the Start menu.
Today we want to show you how to do some simple remapping on both your Mac and your Windows machine so that cut/copy/paste doesn’t trip you up. Of course, this can be applied to all other keyboard shortcuts that use “Command” or “Control” as well.
On a Mac
On a Mac, this is easy. We’ve talked at great length about just how configurable the Mac keyboard is and how you can change and assign keyboard shortcuts for a vast number of items. It’s no different with modifier keys. Open the keyboard preferences and click the “Modifier Keys…” button.
You can change the following four modifier keys: “Caps Lock”, “Control”, “Option”, and “Command”.
For our purposes, we’re only going to modify “Control” to “Command” and “Command” to “Control”.
Now, whenever we want to use any keyboard shortcut such as cut, copy, paste, or anything that previously required the “Command” key, we’ll instead use “Control” instead to execute it.
On Windows
Windows doesn’t provide a simple way to remap keys without modifying the registry, but you can use third-party software that will quickly get the job done. We recommend SharpKeys, which provides an easy-to-use interface and makes short work of everything.
To remap your “Control” key to your “Windows” key, the easiest thing to do is click the “Type Key” button.
First, press the left “Control” button in the left column, then press the “Windows” key in the right column.
Now you see that we’ve remapped the left “Control” button to act as the “Windows” key.
We’re still not done. Even though the “Control” key has been remapped to act as our “Windows” key, we still need to remap the “Windows” key to the “Control” key. Otherwise, you will just have two keys which act like the “Windows” key.
The final result will look like the following screenshot.
The last thing to do is to click the “Write to Registry” button. You will be required to log out of your account or restart the system.
Once your logout/login or restart, your new key mappings will take effect and you will be able to seamlessly go from Mac to PC or PC to Mac without annoying keyboard shortcut gaffes.
You can use SharpKeys to remap any keys you want, so if there are other ways you feel you can make your Windows keyboarding experience easier, then you now know how to do that. Remember, once you remap “Control” to “Windows”, any and all shortcuts that depend upon it will be rely on the “Windows” key instead.
If you have any questions of comments you would like to contribute to this article, please leave your feedback in our discussion forum.
Chris Hoffman is Editor-in-Chief of How-To Geek. He’s written about technology for over a decade and was a PCWorld columnist for two years. Chris has written for The New York Times and Reader’s Digest, been interviewed as a technology expert on TV stations like Miami’s NBC 6, and had his work covered by news outlets like the BBC. Since 2011, Chris has written over 2,000 articles that have been read nearly one billion times—and that’s just here at How-To Geek. Read more.
A Mac’s keyboard layout just isn’t quite right for Windows. Whether you’re primarily a Windows user or primarily an OS X user, the layout doesn’t feel quite right when you run Windows in Boot Camp — but you can fix that.
There are several possible ways you might want to rearrange these keyboard shortcuts depending on what you’re used to. All it takes is a few clicks with SharpKeys and you’ll feel more at home in Boot Camp
The Problem
Mac keyboard layouts are subtly different from PC keyboard layouts. On a typical PC keyboard, the bottom-left corner of the keyboard contains keys in this order: Ctrl, Windows, Alt. On a Mac keyboard, you’ll see the following layout: Control, Option, Command. In Boot Camp, these keys function as Control, Alt, Windows.
In other words, the Alt and Windows key are swapped from where you’d expect them to be. Worse yet, Mac users will have to use the Control key for various keyboard shortcuts that require the Command key on Mac OS X.
There has to be a way to fix this — and there is. We’ll be using SharpKeys to remap these keys in Windows. SharpKeys is an easy-to-use, open-source graphical program that creates the appropriate Windows registry entries to remap keys. You could actually do this all in the registry editor if you like — it just takes more work. This utility works on Windows 7, 8, 8.1, and even older versions of Windows.
Solution 1: If You’re Used to Mac Shortcuts
If you’re used to Mac keyboard shortcuts, you may want to make the Command key function as the Control key. You’ll then be able to use Mac keyboard shortcuts like Command+C, X, or V for Copy, Cut, and Paste in Windows. Pressing Command+L will focus the location bar in your web browser on Windows just as it does on OS X — without the remapping, that Command+L shortcut equals Windows Key+L, which will lock your Windows system.
To do this, install SharpKeys and launch it. Click the Add button and click “Type Key” under the “From key” column on the left. Press the left Command key. Next, click the “Type Key” button under the “To key” column on the right. Press the Control key.
Click OK and click “Write to Registry.” Log out and log in or reboot to activate your changes. Your left Command key will function as a second Control key, which means many Mac Command key shortcuts will just work like you’d expect them to. If you need to press the Windows key, press the Command key on the right side of your keyboard instead.
Solution 2: If You’re Used to Windows Shortcuts
If you’re used to Windows keyboard shortcuts, you’ll probably want to swap the Option/Alt Key with the Command/Windows key. This will change the order from Control, Alt, Windows to Control, Windows, Alt — the same order you’ll find on a standard Windows keyboard. The muscle memory you’ve built up for keyboard shortcuts won’t fail you.
To do this, install SharpKeys and launch it. Click the Add button. Scroll down in the left column and select “Special: Left Alt.” Next, click the “Type Key” button under “To key” on the right. Press the Command key at the right side of your keyboard and then click OK.
Next, click the Add button again. Click “Type Key” under the “From key” column on the left. Press the left Command key. Scroll down in the “To key” column on the right and select “Special: Right Alt.” Click OK and click “Write to Registry.”
Log out and log back in, or reboot your Mac. The Alt/Option key will function as a Windows key and the Command key will function as the Alt key. This means the layout at the left side of your keyboard will be Control, Windows, Alt — just like on Windows.
Solution 3: Make Mac OS X’s Keyboard Shortcuts Match Windows
You could instead adjust your keyboard shortcuts in Mac OS X so they work more like they do in Windows. For example, you could swap the Control and Command keys in Mac OS X — then you’d press Control+C, X, or V to Copy, Cut, and Paste in Mac OS X, just as you would on Windows.
To do this, boot into Mac OS X, click the Apple menu on the menu bar, and select System Preferences. Click the Keyboard icon, click the Modifier Keys button, and swap the Control and Command key functions. You can also easily disable the Caps Lock key from here.
If you decide you don’t like the keyboard remapping you chose, you can open SharpKeys up again, delete the rules you created, and click “Write to Registry.” Everything will be back to normal after you log out and log back in or reboot.
Windows 10 è fuori, quindi stiamo passando dai nostri Mac ai PC con regolarità quotidiana . Mentre ci sono alcune differenze tra di loro, nulla ci fa saltare più di taglia / copia / incolla. Ecco come rimappare tagliare / copiare / incollare in modo che siano uguali su entrambe le piattaforme.
Una delle cose più difficili da abituare quando passiamo da Mac a Windows o da Windows a Mac è taglia / copia / incolla . Su un Mac, questo si ottiene usando la combinazione “Command +”, mentre su Windows avviene tramite “Control +”.
Se non si utilizza una tastiera con marchio Apple, ad esempio una con un tasto Windows, allora che raddoppierà come il tasto “Comando” sul tuo Mac, tuttavia, Windows usa ancora “Control” come suo modificatore, così mentre potresti essere abituato a usare “Command” sul tuo Mac, su Windows tutto ciò che di solito si apre è Start menu.
Oggi vogliamo mostrarti come eseguire alcune semplici operazioni di rimappatura sia sul tuo Mac che sulla tua macchina Windows in modo che taglia / copia / incolla non ti distragga. Naturalmente, questo può essere applicato anche a tutte le altre scorciatoie da tastiera che usano “Comando” o “Controllo”.
Su un Mac
Su un Mac, questo è facile. Abbiamo parlato molto di quanto sia configurabile la tastiera del Mac e di come sia possibile modificare e assegnare scorciatoie da tastiera per un vasto numero di elementi. Non è diverso con i tasti modificatori. Apri le preferenze della tastiera e fai clic sul pulsante “Modifier Keys . “.
Puoi modificare i seguenti quattro tasti modificatori: “Caps Lock”, “Control”, “Option” e “Command”.
Per i nostri scopi , modificheremo solo “Controllo” in “Comando” e “Comando” in “Controllo”.
Ora, ogni volta che vogliamo usare una scorciatoia da tastiera come taglia, copia, incolla o qualsiasi cosa che in precedenza era necessaria il tasto “Comando”, useremo invece “Controllo” invece di eseguirlo.
Su Windows
Windows non fornisce un modo semplice per rimappare le chiavi senza modificare il registro, ma è possibile utilizzare terze parti software che farà rapidamente il lavoro. Consigliamo SharpKeys, che fornisce un’interfaccia facile da usare e rende il lavoro di breve durata di tutto.
Per rimappare il tuo tasto “Control” sul tuo tasto “Windows”, la cosa più semplice da fare è cliccare sul pulsante “Type Key” .
Per prima cosa, premi il pulsante sinistro “Control” nella colonna di sinistra, quindi premi il tasto “Windows” nella colonna di destra.
Ora vedi che abbiamo rimappato il pulsante sinistro “Control” per agire come il tasto “Windows”.
Non abbiamo ancora finito. Anche se il tasto “Control” è stato rimappato per fungere da tasto “Windows”, è necessario rimappare il tasto “Windows” sul tasto “Control”. Altrimenti, avrai solo due chiavi che si comportano come il tasto “Windows”.
Il risultato finale sarà simile alla seguente schermata.
L’ultima cosa da fare è cliccare sul pulsante “Scrivi sul registro”. Ti verrà richiesto di uscire dal tuo account o riavviare il sistema.
Dopo il logout / login o il riavvio, le nuove mappature dei tasti avranno effetto e sarai in grado di passare senza problemi da Mac a PC o PC a Mac senza fastidiose scorciatoie da tastiera.
Puoi usare i tasti di scelta rapida per rimappare i tasti che vuoi, quindi se ci sono altri modi in cui ritieni di poter rendere più facile l’esperienza di tastiera di Windows, ora sai come farlo. Ricorda, una volta rimappato “Controllo” in “Windows”, tutte le scorciatoie che dipendono da esso saranno invece affidate al tasto “Windows”.
Se hai domande sui commenti, vorresti contribuire a questo articolo , si prega di lasciare il vostro feedback nel nostro forum di discussione.
Avvia o riavvia il tuo Mac e renderà il suono tradizionale “suono di avvio”. Questo ti consente di sapere che il Mac si sta avviando correttamente, ma non è appropriato se stai avviando il tuo Mac in un luogo tranquillo come una biblioteca, o se qualcuno sta dormendo nelle vicinanze. Puoi facilmente silenziare il suono su il tuo prossimo avvio, se sai cosa fare.
Hai investito un sacco di energia per raccogliere e curare così tanti film e programmi TV fantastici sul tuo Plex Media Server, non sarebbe bello se potessi condividere tutto quel contenuto con i tuoi amici? Con alcune piccole modifiche, puoi: ti mostreremo come fare. Perché vorresti farlo Se sei come noi, probabilmente hai passato molto tempo a costruire i tuoi file multimediali centro e curare attentamente i film e mostra che ami davvero, completo di fanart accuratamente selezionato per andare con esso.
L’une des choses les plus difficiles à faire quand on passe de Mac à Windows, ou de Windows à Mac est couper / copier / coller . Sur un Mac, ceci est accompli en utilisant la combinaison “Command +”, tandis que sous Windows, c’est “Control +”.
Si vous n’utilisez pas un clavier de marque Apple, tel qu’un clavier avec une touche Windows, alors cela va doubler comme la touche “Command” sur votre Mac, cependant, Windows utilise encore “Control” comme modificateur, alors que vous pouvez avoir l’habitude d’utiliser “Command” sur votre Mac, sur Windows, tout ce qui est typiquement ouvert est le Start. menu.
Aujourd’hui, nous voulons vous montrer comment effectuer un remappage simple à la fois sur votre Mac et sur votre machine Windows afin de ne pas vous couper / copier / coller. Bien sûr, cela peut être appliqué à tous les autres raccourcis clavier qui utilisent aussi “Command” ou “Control”.
Sur un Mac, c’est facile. Nous avons beaucoup parlé de la façon dont le clavier Mac est configurable et comment vous pouvez changer et attribuer des raccourcis clavier pour un grand nombre d’éléments. Ce n’est pas différent avec les touches de modification. Ouvrez les préférences du clavier et cliquez sur le bouton “Modifier les touches . “
Vous pouvez modifier les quatre touches de modification suivantes: “Verr Maj”, “Contrôle”, “Option” et “Commande”.
Pour nos besoins , nous allons seulement modifier “Control” à “Command” et “Command” à “Control”.
Maintenant, chaque fois que nous voulons utiliser un raccourci clavier tel que couper, copier, coller, ou tout ce qui était nécessaire auparavant la touche “Command”, nous utiliserons plutôt “Control” pour l’exécuter.
Windows ne fournit pas un moyen simple de remapper les clés sans modifier le registre, mais vous pouvez utiliser des tierces parties logiciel qui fera rapidement le travail. Nous recommandons SharpKeys, qui fournit une interface facile à utiliser et qui raccourcit tout.
Pour remapper votre clé “Control” sur votre touche “Windows”, le plus simple est de cliquer sur le bouton “Type Key”. .
D’abord, appuyez sur le bouton “Control” gauche dans la colonne de gauche, puis appuyez sur la touche “Windows” dans la colonne de droite.
Vous voyez maintenant que nous avons remappé le bouton “Control” gauche la touche “Windows”.
Nous n’avons toujours pas terminé. Même si la touche “Control” a été remappée pour agir comme notre touche “Windows”, nous devons encore remapper la touche “Windows” à la touche “Control”. Sinon, vous n’aurez que deux clés qui agissent comme la touche “Windows”
Le résultat final ressemblera à la capture d’écran suivante:
La dernière chose à faire est de cliquer sur le bouton “Ecrire au registre”. Vous serez obligé de vous déconnecter de votre compte ou de redémarrer le système.
Une fois que vous vous déconnectez / connectez ou redémarrez, vos nouveaux mappages de touches entreront en vigueur et vous pourrez passer de Mac à PC ou PC à Mac sans gaffes de raccourcis clavier ennuyeux.
Vous pouvez utiliser SharpKeys pour remapper toutes les touches que vous voulez, donc s’il y a d’autres façons de rendre votre expérience de saisie Windows plus facile, alors vous savez maintenant comment faire. Rappelez-vous, une fois que vous remappez “Contrôle” sur “Windows”, tous les raccourcis qui en dépendent dépendent de la touche “Windows”.
Si vous avez des questions de commentaires, vous aimeriez contribuer à cet article , laissez vos commentaires dans notre forum de discussion.
Parfois, même après avoir désinstallé un programme, son entrée restera listée dans la liste Ajout / Suppression de programmes ou dans la liste Programmes et fonctionnalités sous Programmes actuellement installés dans le Panneau de configuration.Ceci est généralement causé par un programme mal écrit qui ne se désinstalle pas correctement. L’entré
Constatez-vous que vous ne voyez pas de nouvelles applications sur l’App Store ou que les mises à jour des applications ne sont pas disponibles loin, même après avoir installé les mises à jour? Voici une solution simple. Même si l’App Store n’est pas une page Web, il met en cache les données afin qu’elles se chargent plus rapidement, tout comme une page Web.
Geoffrey_Carr
Windows 10 è fuori, quindi stiamo passando dai nostri Mac ai PC con regolarità quotidiana. Mentre ci sono alcune differenze tra di loro, nulla ci fa saltare più di taglia / copia / incolla. Ecco come rimappare tagliare / copiare / incollare in modo che siano gli stessi su entrambe le piattaforme.
Una delle cose più difficili da abituare quando passiamo da Mac a Windows o da Windows a Mac è taglia / copia / incolla. Su un Mac, questo si ottiene usando la combinazione “Command +”, mentre su Windows avviene tramite “Control +”.
Se non si utilizza una tastiera con marchio Apple, ad esempio una con un tasto Windows, che raddoppierà come il tasto “Comando” sul Mac, tuttavia, Windows utilizza ancora “Controllo” come modificatore, così mentre si può essere usato per usare “Comando” sul tuo Mac, su Windows tutto ciò che normalmente si fa è aprire il menu Start.
Oggi vogliamo mostrarti come eseguire alcune semplici operazioni di rimappatura sia sul tuo Mac che sulla tua macchina Windows, in modo che cut / copy / paste non ti sconvolga. Ovviamente, questo può essere applicato anche a tutte le altre scorciatoie da tastiera che usano “Comando” o “Controllo”.
Su un Mac
Su un Mac, questo è facile. Abbiamo parlato a lungo di quanto sia configurabile la tastiera del Mac e di come sia possibile modificare e assegnare scorciatoie da tastiera per un vasto numero di elementi. Non è diverso con i tasti modificatori. Apri le preferenze della tastiera e fai clic sul pulsante “Modifier Keys . “.
È possibile modificare i seguenti quattro tasti modificatori: “Caps Lock”, “Control”, “Option” e “Command”.
Per i nostri scopi, modificheremo solo “Controllo” su “Comando” e “Comando” su “Controllo”.
Ora, ogni volta che vogliamo usare una scorciatoia da tastiera come taglia, copia, incolla o qualsiasi cosa che in precedenza richiedesse il tasto “Comando”, useremo invece “Controllo” invece di eseguirlo.
Su Windows
Windows non fornisce un modo semplice per rimappare le chiavi senza modificare il registro, ma è possibile utilizzare un software di terze parti che svolgerà rapidamente il lavoro. Consigliamo SharpKeys, che fornisce un’interfaccia facile da usare e rende il lavoro breve di tutto.
Per rimappare il tuo tasto “Control” sul tuo tasto “Windows”, la cosa più semplice da fare è cliccare sul pulsante “Type Key”.
Per prima cosa, premere il pulsante sinistro “Control” nella colonna di sinistra, quindi premere il tasto “Windows” nella colonna di destra.
Ora vedi che abbiamo rimappato il tasto sinistro “Control” per agire come il tasto “Windows”.
Non abbiamo ancora finito. Anche se il tasto “Control” è stato rimappato per fungere da tasto “Windows”, è necessario rimappare il tasto “Windows” sul tasto “Control”. Altrimenti, avrai solo due chiavi che si comportano come il tasto “Windows”.
Il risultato finale sarà simile allo screenshot seguente.
L’ultima cosa da fare è cliccare sul pulsante “Scrivi sul registro”. Ti verrà richiesto di uscire dal tuo account o riavviare il sistema.
Una volta effettuato il logout / login o il riavvio, le nuove mappature dei tasti avranno effetto e sarete in grado di passare senza problemi da Mac a PC o PC a Mac senza fastidiose gaffe da tastiera.
Puoi utilizzare i tasti di scelta rapida per rimappare i tasti desiderati, quindi se ci sono altri modi in cui ritieni di poter rendere l’esperienza di tastiera di Windows più facile, ora sai come farlo. Ricorda, una volta rimappato “Controllo” in “Windows”, tutte le scorciatoie che dipendono da esso si baseranno invece sul tasto “Windows”.
Se avete domande sui commenti che vorreste contribuire a questo articolo, lasciate il vostro feedback nel nostro forum di discussione.
“Windows 10” yra išjungtas, todėl kasdien reguliariai einame iš “Mac” į kompiuterius. . Nors tarp jų yra nemažai skirtumų, niekas mūsų neapsiriboja daugiau nei iškirpti / kopijuoti / įklijuoti. Štai kaip iš naujo supjaustyti / kopijuoti / įklijuoti, kad jie būtų vienodi abiejose platformose.
Vienas iš sunkiausių būdų, kaip priprasti prie to, kada mes einame iš “Mac” į “Windows”, arba “Windows” sistemai “Mac”, yra nukirsta / kopijuojama / įklijuojama . “Mac” kompiuteryje tai atliekama naudojant “Command +” kombinaciją, o “Windows” – naudojant “Control +”.
Jei nenaudojate Apple klaviatūros, tokios kaip “Windows” raktas, tada tai dubliuos kaip “Command” raktas jūsų “Mac”, tačiau “Windows” vis dar naudoja “Control” kaip jo modifikatorių, kad galėtumėte naudoti “Command” savo “Mac” sistemoje “Windows” sistemoje, visada, kaip paprastai, atidarykite “Start” meniu.
Šiandien mes norime parodyti jums, kaip padaryti paprastą pakeitimą jūsų “Mac” ir “Windows” kompiuteryje, taigi iškirpti / nukopijuoti / įklijuoti nekelia. Žinoma, tai gali būti taikoma ir visoms kitoms spartieji klavišai, kurie naudoja “Command” arba “Control”.
“Mac”, tai yra lengva. Mes puikiai kalbėjome apie tai, kaip konfigūruojama “Mac” klaviatūra, ir kaip galite keisti ir priskirti sparčiuosius klavišus daugeliui elementų. Tai nesiskiria su modifikavimo mygtukais. Atidarykite klaviatūros nuostatas ir spustelėkite mygtuką “Modifikavimo mygtukai . “.
Galite pakeisti šiuos keturis modifikavimo klavišus: “Caps Lock”, “Control”, “Option” ir “Command”.
Mūsų tikslams , mes tik keisime “Control” į “Command” ir “Command”, kad “Control”.
Dabar, kai mes norime naudoti bet kurią spartieji klavišus, pvz., supjaustyti, nukopijuoti, įklijuoti arba ką nors anksčiau reikalaujantį “Command” klavišą, mes vietoj jo naudosime “Control”.
“Windows” operacinėje sistemoje
“Windows” nesuteikia paprasto būdo keisti raktus, bet ne keičia registro, bet galite naudoti trečiąsias šalis programinė įranga, kuri greitai atliks darbą. Mes rekomenduojame “SharpKeys”, kuris suteikia lengvai naudojamą sąsają ir trumpai veikia viską.
Norėdami pertvarkyti savo “Control” klavišą prie “Windows” klavišo, lengviausia padaryti, tai spustelėkite mygtuką “Type Key”
Pirma, kairiajame stulpelyje paspauskite kairįjį mygtuką “Valdymas”, tada dešinėje stulpelyje paspauskite “Windows” klavišą.
Dabar matote, kad mes iš naujo pasirinkome kairįjį mygtuką “Valdymas”, kad veiktų kaip “Windows” klavišą.
Mes vis dar nebaigta. Nors “Control” raktas buvo pakeistas, kad veiktų kaip mūsų “Windows” raktas, mes vis tiek turime iš naujo “Windows” klavišą į “Control” klavišą. Kitaip jums reikės tik dviejų raktų, kurie veiktų kaip “Windows” raktas.
Galutinis rezultatas atrodys taip:
Paskutinis dalykas, kurį reikia padaryti, yra paspausti mygtuką “Įrašyti į registrą”. Jums reikės atsijungti iš savo paskyros arba iš naujo paleisti sistemą.
Kai atsijungsite / prisijungsite arba iš naujo paleisite naujus raktų atvaizdavimus, galėsite lengvai persijungti iš “Mac” į kompiuterį arba kompiuterį “Mac” be erzina klaviatūros spartusis klavišus.
Galite naudoti “SharpKeys”, kad pakeistumėte bet kokius norimus raktus, taigi, jei yra kitų būdų, kuriuos manote, galite lengviau atlikti “Windows” klaviatūros versiją, tada jūs dabar žinote, kaip tai padaryti. Prisiminkite, kad jei pakeisite “Control” į “Windows”, bet kokie ir visi nuo jo priklausantys spartieji klavišai bus naudojami vietoj “Windows”.
Jei turite klausimų apie komentarus, į kuriuos norite prisidėti prie šio straipsnio , prašome palikti savo atsiliepimus mūsų diskusijų forume.
Ieškote gerų “Windows” darbalaukio / “shell” pakeitimo programų? Tiems iš jūsų, kurie jaučia poreikį, yra tinkinti, alternatyva “Windows” apvalkale – vienas iš galimų sprendimų. Taigi, kas tiksliai yra “lukšto” pakeitimas? Tai iš esmės programa, kuri bus integruota su “Windows” ir pakeis numatytąjį “shell”. Korpusas yra G
Jūs pridėjote komentarus į savo darbalapį, o dabar norite jį atspausdinti, nes šie komentarai yra nepažeisti. Tačiau “Excel” nespausdina komentarų pagal nutylėjimą. Čia yra du būdai tai padaryti. Prieš spausdindami pastabas darbalapyje, turite būti tikri, kad pastabos nėra paslėptos naudojant šias instrukcijas.
Windows 10 đã hết, vì vậy chúng tôi sẽ chuyển từ máy Mac sang PC thường xuyên hàng ngày. Mặc dù có khá nhiều sự khác biệt giữa chúng, nhưng không có gì khiến chúng ta vấp ngã hơn là cắt / sao chép / dán. Dưới đây là cách ánh xạ lại cắt / sao chép / dán sao cho giống nhau trên cả hai nền tảng.
Một trong những điều khó nhất để làm quen khi chúng ta chuyển từ Mac sang Windows hoặc Windows sang Mac là cắt / sao chép / dán. Trên máy Mac, điều này được thực hiện bằng cách sử dụng kết hợp Lệnh Command +, trong khi trên Windows, nó được thực hiện thông qua Điều khiển + +.
Tuy nhiên, nếu bạn không sử dụng bàn phím mang nhãn hiệu Apple, chẳng hạn như bàn phím có phím Windows, thì phím đó sẽ tăng gấp đôi so với phím Mã lệnh Command trên máy Mac của bạn, tuy nhiên, Windows vẫn sử dụng công cụ điều khiển của điều khiển trong khi bạn có thể Được sử dụng để sử dụng lệnh Command Command trên máy Mac, trên Windows, tất cả những gì thường làm là mở menu Bắt đầu.
Hôm nay chúng tôi muốn chỉ cho bạn cách thực hiện một số ánh xạ đơn giản trên cả máy Mac và máy Windows của bạn để việc cắt / sao chép / dán không làm bạn vấp ngã. Tất nhiên, điều này cũng có thể được áp dụng cho tất cả các phím tắt khác sử dụng Lệnh Command Lệnh hay Điều khiển.
Trên máy Mac
Trên máy Mac, điều này thật dễ dàng. Chúng ta đã nói rất nhiều về việc bàn phím Mac có thể cấu hình như thế nào và cách bạn có thể thay đổi và gán các phím tắt cho một số lượng lớn các mục. Nó không khác với các phím bổ trợ. Mở tùy chọn bàn phím và nhấp vào nút Phím Modifier.
Bạn có thể thay đổi bốn phím bổ trợ sau: Mũ lưỡi trai Khóa, Chế độ điều khiển, Chế độ Tùy chọn, và Lệnh Command.
Với mục đích của chúng tôi, chúng tôi sẽ chỉ sửa đổi Điều khiển điều khiển thành Lệnh điều khiển và Lệnh điều khiển.
Bây giờ, bất cứ khi nào chúng tôi muốn sử dụng bất kỳ phím tắt nào như cắt, sao chép, dán hoặc bất cứ thứ gì trước đây yêu cầu phím Lệnh Command Command, thay vào đó, chúng tôi sẽ sử dụng Thay thế Control Control thay vì thực thi nó.
Trên Windows
Windows không cung cấp một cách đơn giản để sắp xếp lại các khóa mà không sửa đổi sổ đăng ký, nhưng bạn có thể sử dụng phần mềm của bên thứ ba sẽ nhanh chóng hoàn thành công việc. Chúng tôi khuyên dùng SharpKeys, cung cấp giao diện dễ sử dụng và thực hiện mọi thứ ngắn gọn.
Để ánh xạ lại khóa Phím điều khiển của bạn vào khóa Windows Windows của bạn, cách dễ nhất là nhấp vào nút Loại khóa.
Đầu tiên, nhấn nút Điều khiển bên trái ở cột bên trái, sau đó nhấn phím Windows Windows ở cột bên phải.
Bây giờ bạn thấy rằng chúng tôi đã ánh xạ lại nút Điều khiển bên trái để hoạt động như là khóa Windows Windows.
Chúng ta vẫn chưa xong. Mặc dù khóa điều khiển của Cameron đã được ánh xạ lại để hoạt động như khóa Windows Windows của chúng tôi, nhưng chúng ta vẫn cần phải sử dụng lại khóa Windows Windows với khóa phím Control Control. Nếu không, bạn sẽ chỉ có hai khóa hoạt động giống như khóa Windows Windows ‘.
Kết quả cuối cùng sẽ giống như ảnh chụp màn hình sau.
Điều cuối cùng cần làm là nhấp vào nút Ghi vào Sổ đăng ký. Bạn sẽ được yêu cầu đăng xuất khỏi tài khoản của mình hoặc khởi động lại hệ thống.
Khi đăng xuất / đăng nhập hoặc khởi động lại, ánh xạ khóa mới của bạn sẽ có hiệu lực và bạn sẽ có thể đi liền mạch từ Mac sang PC hoặc PC sang Mac mà không gặp phải các phím tắt khó chịu.
Bạn có thể sử dụng SharpKeys để ánh xạ lại bất kỳ phím nào bạn muốn, vì vậy nếu có những cách khác bạn cảm thấy có thể giúp trải nghiệm bàn phím Windows của bạn dễ dàng hơn, thì bây giờ bạn đã biết cách thực hiện điều đó. Hãy nhớ rằng, một khi bạn ánh xạ lại điều khiển, điều khiển từ tính đến điều chỉnh Windows, thì bất kỳ và tất cả các phím tắt phụ thuộc vào nó sẽ được dựa vào khóa Windows Windows Thay thế.
Nếu bạn có bất kỳ câu hỏi ý kiến nào bạn muốn đóng góp cho bài viết này, vui lòng để lại phản hồi của bạn trong diễn đàn thảo luận của chúng tôi.
Windows 10 está apagado, por lo que vamos de nuestras Macs a las PC con regularidad diaria . Si bien hay bastantes diferencias entre ellos, nada nos dispara más que cortar / copiar / pegar. Aquí se explica cómo reasignar cortar / copiar / pegar para que sean iguales en ambas plataformas.
Una de las cosas más difíciles de acostumbrar cuando pasamos de Mac a Windows o de Windows a Mac es cortar / copiar / pegar . En una Mac, esto se logra usando la combinación “Comando +”, mientras que en Windows se hace a través de “Control +”.
Si no está usando un teclado de marca Apple, como uno con una clave de Windows, entonces que se duplicará como la tecla “Comando” en su Mac, sin embargo, Windows todavía usa “Control” como su modificador, así que mientras usted puede estar acostumbrado a usar “Comando” en su Mac, en Windows todo lo que normalmente hará es abrir el Inicio menú.
Hoy queremos mostrarte cómo hacer una reasignación simple tanto en tu Mac como en tu máquina con Windows para que cortar / copiar / pegar no te haga tropezar. Por supuesto, esto se puede aplicar a todos los demás métodos abreviados de teclado que también usan “Comando” o “Control”.
En Mac
En una Mac, esto es fácil. Hemos hablado ampliamente sobre cuán configurable es el teclado Mac y cómo puede cambiar y asignar atajos de teclado para una gran cantidad de elementos. No es diferente con las teclas modificadoras. Abra las preferencias del teclado y haga clic en el botón “Teclas modificadoras”.
Puede cambiar las siguientes cuatro teclas modificadoras: “Bloq mayús”, “Control”, “Opción” y “Comando”.
Para nuestros propósitos , solo vamos a modificar “Control” a “Comando” y “Comando” a “Control”.
Ahora, cada vez que queremos usar un atajo de teclado como cortar, copiar, pegar o cualquier cosa que haya sido previamente requerida la tecla “Comando”, en su lugar usaremos “Control” para ejecutarla.
En Windows
Windows no proporciona una forma simple de reasignar claves sin modificar el registro, pero puede usar un tercero software que hará el trabajo rápidamente. Recomendamos SharpKeys, que proporciona una interfaz fácil de usar y hace que todo funcione muy rápido.
Para reasignar su clave de “Control” a su clave “Windows”, lo más fácil es hacer clic en el botón “Escribir clave” .
Primero, presione el botón izquierdo “Control” en la columna de la izquierda, luego presione la tecla “Windows” en la columna de la derecha.
Ahora verá que hemos reasignado el botón “Control” izquierdo para actuar como la tecla “Windows”.
Todavía no hemos terminado. Aunque la clave “Control” se ha reasignado para que actúe como nuestra tecla “Windows”, aún necesitamos reasignar la tecla “Windows” a la tecla “Control”. De lo contrario, solo tendrá dos teclas que actúan como la tecla “Windows”.
El resultado final se verá como la siguiente captura de pantalla.
Lo último que debe hacer es hacer clic en el botón “Escribir en el registro”. Se le pedirá que cierre la sesión de su cuenta o reinicie el sistema.
Una vez que cierre sesión / inicie sesión o reinicie, las nuevas asignaciones de teclas tendrán efecto y podrá pasar de Mac a PC o PC a Mac sin problemas. molestos accesos directos al teclado.
Puedes usar SharpKeys para reasignar las teclas que quieras, así que si hay otras maneras en las que sientes que puedes facilitar tu experiencia con el teclado de Windows, ahora sabes cómo hacerlo. Recuerde, una vez que vuelva a asignar “Control” a “Windows”, todos y cada uno de los accesos directos que dependen de él se basarán en su lugar en la tecla “Windows”.
Si tiene alguna pregunta sobre los comentarios, le gustaría contribuir a este artículo. , por favor deje sus comentarios en nuestro foro de discusión.
Los teléfonos inteligentes, relojes inteligentes, tabletas, rastreadores de fitness y todos nuestros demás aparatos nos dejan cargados de múltiples cargadores y mucho desorden. Libere sus puntos de venta y cargue todos sus dispositivos con un solo enchufe. Todos tenemos varios dispositivos para cargar todos los días, y ese número solo aumenta.
De manera predeterminada, las notificaciones emergentes en Windows 10 solo se mantienen durante unos 5 segundos antes de que se envíen al Centro de actividades. Si desea que esas notificaciones permanezcan en la pantalla un poco más, es un cambio fácil de realizar. Solo tiene que saber dónde buscarlo.
Windows 10 är ute, så vi går från våra Macs till datorer med daglig regelbundenhet . Medan det finns en hel del skillnader mellan dem, ger oss ingenting mer än att klippa / kopiera / klistra in. Det här är hur man remapar klippa / kopiera / klistra in så att de är desamma på båda plattformarna.
En av de svåraste sakerna som vänjer sig när vi går från Mac till Windows, eller Windows till Mac är klippt / kopiera / klistra in . På en Mac uppnås detta genom att använda “Command +” -kombinationen, medan det i Windows sker via “Control +”.
Om du inte använder ett tangentbord från Apple-märkt, till exempel en med en Windows-nyckel, då som kommer att fördubblas som “Command” -tangenten på din Mac, men Windows använder fortfarande “Control” som dess modifierare, så medan du kan användas för att använda “Command” på din Mac, på Windows allt som vanligtvis gör är att öppna Start meny.
Idag vill vi visa dig hur du gör en enkel omformning på både din Mac och din Windows-maskin så att klippa / kopiera / klistra inte sönder dig. Naturligtvis kan detta tillämpas på alla andra kortkommandon som använder “Command” eller “Control” också.
På en Mac
På en Mac är det enkelt. Vi har pratat mycket länge om hur konfigurerbart Mac-tangentbordet är och hur du kan ändra och tilldela kortkommandon för ett stort antal objekt. Det är inte annorlunda med modifieringsnycklar. Öppna tangentbordets inställningar och klicka på knappen “Ändringsnycklar . “.
Du kan ändra följande fyra modifieringsnycklar: “Caps Lock”, “Control”, “Option” och “Command”.
För våra ändamål , vi kommer bara att ändra “Control” till “Command” och “Command” till “Control”.
Nu, när vi vill använda någon tangentbordsgenväg, t.ex. klipp, kopiera, klistra in eller någonting som tidigare krävdes Kommandotangenten kommer istället att använda “Control” istället för att utföra det.
I Windows
tillhandahåller Windows inte en enkel metod att byta om nycklar utan att ändra registret, men du kan använda tredje part programvara som snabbt kommer att få jobbet gjort. Vi rekommenderar SharpKeys, som ger ett användarvänligt gränssnitt och gör korta arbeten med allt.
För att omhämta din “Control” -tangent till din “Windows” -tangent, är det enklaste att göra genom att klicka på knappen “Typnyckel” .
Först trycker du på vänster “Control” -knappen i den vänstra kolumnen och trycker sedan på “Windows” -knappen i den högra kolumnen.
Nu ser du att vi har ommärkt den vänstra “Control” -knappen för att fungera som “Windows” -knappen.
Vi är fortfarande inte färdiga. Trots att “Control” -nyckeln har ombokats för att fungera som vår “Windows” -nyckel, behöver vi fortfarande omforma “Windows” -nyckeln till “Control” -nyckeln. Annars kommer du bara ha två nycklar som fungerar som “Windows” -knappen.
Slutresultatet kommer att se ut som följande skärmdump.
Det sista du behöver göra är att klicka på “Skriv till registret” -knappen. Du kommer att behöva logga ut från ditt konto eller starta om systemet.
När du loggar ut eller loggar in eller startar om, kommer dina nya nyckelmappningar att träda i kraft och du kommer att kunna gå smidigt från Mac till PC eller PC till Mac utan irriterande tangentbordsgenväg.
Du kan använda SharpKeys för att omforma alla nycklar du vill ha, så om du har andra sätt att känna att du kan göra din Windows-tangentbordserfarenhet enklare, vet du nu hur du gör det. Kom ihåg att när du omarbetning “Control” till “Windows” kommer alla genvägar som beror på det att vara beroende av “Windows” -nyckeln istället.
Om du har några frågor om kommentarer du vill bidra till den här artikeln , vänligen lämna din feedback i vårt diskussionsforum.
När du tar en skärmdump i Windows 10 med Windows + PrtScn-genvägen sparar den automatiskt bilderna genom att namnge dem “Skärmdump (1)”, ” Skärmdump (2), “och så vidare. Även om du tar bort skärmdumpar, fortsätter den räknaren bara att gå upp. Du kan använda ett snabbt registerhack för att återställa den räknaren när du vill.
Du hittar din Apple Watch väldigt användbar och du vill dela saker som dina fitness- och aktivitetsprestationer, ditt anpassade klockans ansikte, meddelanden du får , och nästan allt annat på din skärm. Lyckligtvis är det väldigt enkelt att ta en skärmdump av din klocka. Med klockan 3 måste du aktivera skärmdumpar på din klocka.
If you want the keys on your keyboard to something else than the usual, then read up on how to remap them in Windows 10 using the free SharpKeys utility.
Most of us are happy with a keyboard in its out-of-the-box condition. And if we aren’t, we usually put up with its quirks and inconveniences. These can range from accessibility issues to regional incompatibilities and, of course, just plain old preference. But for those who can’t tolerate our keyboards being inefficient or incorrect, there’s a solution: SharpKeys.
SharpKeys 3.6 is another gem I found among many on the Github website, such as the HOSTS File editor, making it easier to edit your Windows Host file without all the hassle involved. Like the HOST file editor, SharpKeys takes functionality that exists in Windows 10—remapping your keyboard keys—but makes it easy enough for the everyday user to do it on the fly. With SharpKeys, you can quickly and easily reassign your keyboard key to another key or make it into a shortcut to launch an application or perform some other Windows function. I’ll show you how to get started.
Use SharpKeys 3.6 to Change What Keys Do
First of all, what does SharpKeys do? SharpKeys lets you remap common keys on your keyboard for other functions. For instance, you can make your Caps Lock key become your new Shift key and vice versa. This utility exposes a hidden function already built into Windows; SharpKey makes it easy for you and me to change which key we want to use with a few simple clicks. Before we get started, it’s important to list what it can and cannot do. Here is what the site’s description says:
Things that SharpKeys will do:
- Map an entire key to any other key – e.g., you could remap Caps Lock to a Shift key.
- Remap more than one key to one single key – e.g., you could remap every key on a keyboard to the letter Q
- Force you to look for the Left or Right ALT key in the list of available keys because Type Key cannot scan for ALT
Things that SharpKeys will not do:
- Allow you to swap two keys with each other – e.g., you can’t have Q and Z swap places because the remapping code would get confused.
- Map multiple key presses to one key – e.g., it will not support any attempt to remap Ctrl+C to the F5 key.
- Map mouse clicks to any key.
- Support certain hardware keys that never make it to Windows – e.g., Logitech’s volume buttons or most Fn keys
- Support multiple mappings for different users – the Windows key being tweaked is for an entire machine.
- Protect you from yourself – if you disable your DEL key and can’t log in because Ctrl+Alt+Del doesn’t work now, you’ll have to reformat Source.
Some perfect points to keep in mind when using SharpKeys. Don’t get crazy using it. SharpKeys 3.6 is a small download, less than 600 KBs. The MSI installer had me up and running in seconds.
After installation, launch Start, click SharpKeys under Recently added, or look under the S group in All apps.
SharpKeys greets you with a small note reminding users that the app supports versions as far back as Windows 2000 (if you’re crazy enough to use Windows 2000 still).
The interface is not particularly intuitive, but once you figure it out, it’s pretty easy. To begin, click the Add button, which will bring up another user interface.
Select a key in the left pane you want to map to another key, app, or window. For example, I want my Shift key to open My Computer. Click in the right pane, scroll down to My Computer, then select that option. Click OK to confirm changes.
Click Write to Registry to confirm changes. You will be prompted to log out or reboot to complete the changes. When I used SharpKeys, signing out and signing back in was enough to write the changes.
So, how did the program do?
Yes, it does work, and I must say, it does add a world of difference to how you use your keyboard to get to things faster. Instead of having to strike multiple keys or reach for the mouse, it’s a definite time-saver.
If at any time you want to remove the changes you made, fire up SharpKeys again, select the assigned key, then click Delete.
Another key I found useful to reassign was the quote key on my laptop, which was originally manufactured for the UK. The @ symbol was assigned to a location among the qwerty keys for what reason I do not know. But I was able to restore it to a more natural location thanks to SharpKeys. So, if you have a keyboard that’s holding you back, give this a spin and let us know how it goes.
Remember, don’t get too crazy and lock yourself out and always maintain a recent backup or system restore point just in case something goes wrong.
This article describes how Windows Explorer handles file and folder permissions in different situations.
Applies to: В Windows 10 – all editions, Windows Server 2012 R2
Original KB number: В 310316
Summary
In Microsoft Windows 2000, in Windows Server 2003, and in Windows XP, you have the option of using either the FAT32 file system or the NTFS file system. When you use NTFS, you can grant permissions to your folders and files to control access to those objects. When you copy or move a file or folder on an NTFS volume, how Windows Explorer handles the permissions on the object varies, depending on whether the object is copied or moved within the same NTFS volume or to a different volume.
More information
By default, an object inherits permissions from its parent object, either at the time of creation or when it is copied or moved to its parent folder. The only exception to this rule occurs when you move an object to a different folder on the same volume. In this case, the original permissions are retained.
Additionally, note the following rules:
The Everyone group is granted Allow Full Control permissions to the root of each NTFS drive.
Deny permissions always take precedence over Allow permissions.
Explicit permissions take precedence over inherited permissions.
If NTFS permissions conflict, for example, if group and user permissions are contradictory, the most liberal permissions take precedence.
Permissions are cumulative.
To preserve permissions when files and folders are copied or moved, use the Xcopy.exe utility with the /O or the /X switch.
The object’s original permissions will be added to inheritable permissions in the new location.
To add an object’s original permissions to inheritable permissions when you copy or move an object, use the Xcopy.exe utility with the -O and -X switches.
To preserve existing permissions without adding inheritable permissions from the parent folder, use the Robocopy.exe utility, which is available in the Windows 2000 Resource Kit.
You can modify how Windows Explorer handles permissions when objects are copied or moved to another NTFS volume. When you copy or move an object to another volume, the object inherits the permissions of its new folder. However, if you want to modify this behavior to preserve the original permissions, modify the registry as follows.
This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see How to back up and restore the registry in Windows.
Click Start, click Run, type regedit in the Open box, and then press ENTER.
Locate and then click the registry key: HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer .
On the Edit menu, click Add Value, and then add the following registry value:
- Value name: ForceCopyAclwithFile
- Data type: DWORD
- Value data: 1
Exit Registry Editor.
You can modify how Windows Explorer handles permissions when objects are moved in the same NTFS volume. As mentioned, when an object is moved within the same volume, the object preserves its permissions by default. However, if you want to modify this behavior so that the object inherits the permissions from the parent folder, modify the registry as follows:
Click Start, click Run, type regedit, and then press ENTER.
Locate and then click the registry subkey: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer .
On the Edit menu, click Add Value, and then add the following registry value:
- Value name: MoveSecurityAttributes
- Data type: DWORD
- Value data: 0
Exit Registry Editor.
Make sure that the user account that is used to move the object has the Change Permissions permission set. If the permission is not set, grant the Change Permissions permission to the user account.
The MoveSecurityAttributes registry value only applies to Windows XP and to Windows Server 2003. The value does not affect Windows 2000.
Windows 10 er ute, så vi går fra Macs til PCer med daglig regelmessighet . Mens det er ganske mange forskjeller mellom dem, gir ingenting oss mer enn kutt / kopi / lim inn. Her er hvordan å omforme kutt / kopiere / lime slik at de er de samme på begge plattformene.
En av de vanskeligste tingene som blir vant til når vi går fra Mac til Windows, eller Windows til Mac er kuttet / kopi / lim . På en Mac oppnås dette ved å bruke “Command +” -kombinasjonen, mens i Windows gjøres det gjennom “Control +”.
Hvis du ikke bruker et Apple-merket tastatur, for eksempel en med en Windows-nøkkel, så som vil doble som “Command” -tasten på Mac-en din, men Windows bruker fortsatt “Control” som modifikator, så mens du kan være vant til å bruke “Command” på Mac, på Windows alt som vanligvis vil gjøre er å åpne Start meny.
I dag vil vi vise deg hvordan du gjør noen enkle remapping på både din Mac og Windows-maskinen, slik at klippe / kopiere / lime ikke trekker deg opp. Selvfølgelig kan dette brukes på alle andre tastaturgenveier som bruker “Command” eller “Control” også.
På en Mac
På en Mac er dette enkelt. Vi har snakket mye om hvordan konfigurerbare Mac-tastaturet er, og hvordan du kan endre og tilordne tastatursnarveier for et stort antall elementer. Det er ikke annerledes med modifikasjonsnøkler. Åpne tastaturinnstillingene og klikk på knappen “Modifier Keys . “.
Du kan endre følgende fire modifiseringsnøkler: “Caps Lock”, “Control”, “Option” og “Command”.
For våre formål , vi skal bare endre “Control” til “Command” og “Command” til “Control”.
Nå, når vi vil bruke en hvilken som helst tastatursnarvei, for eksempel kutte, kopiere, lime eller noe som tidligere krevde Kommandotasten vil i stedet bruke “Control” i stedet for å utføre den.
I Windows
gir Windows ikke en enkel måte å omforme nøkler uten å endre registret, men du kan bruke tredjepart programvare som raskt vil få jobben gjort. Vi anbefaler SharpKeys, som gir et brukervennlig grensesnitt og gjør kort arbeid av alt.
For å omforme “Control” -tasten til “Windows” -tasten, er det enkleste å gjøre å klikke på “Type Key” -knappen .
Først trykker du på venstre “Control” -knappen i den venstre kolonnen, og trykker deretter på “Windows” -tasten i høyre kolonne.
Nå ser du at vi har remapped den venstre “Control” -knappen for å fungere som “Windows” -tasten.
Vi er fremdeles ikke ferdige. Selv om “Control” -tasten er remapped for å fungere som vår “Windows” -nøkkel, trenger vi fortsatt å omarbeide Windows-nøkkelen til “Control” -tasten. Ellers vil du bare ha to nøkler som fungerer som “Windows” -tasten.
Det endelige resultatet vil se ut som følgende skjermdump.
Det siste du må gjøre er å klikke på “Skriv til register” -knappen. Du vil bli pålagt å logge deg ut av kontoen din eller starte systemet på nytt.
Når du logger ut eller logger på eller starter på nytt, vil de nye nøkkelmappingene dine tre i kraft, og du kan sømløst gå fra Mac til PC eller PC til Mac uten irriterende tastaturgenveier.
Du kan bruke SharpKeys til å omforme noen av tastene du vil ha, så hvis du har andre måter du føler at du kan gjøre Windows-tastaturopplevelsen enklere, vet du nå hvordan du gjør det. Husk at når du fjerner “Kontroll” til “Windows”, vil alle snarveier som avhenger av det, være avhengig av “Windows” -tasten i stedet.
Hvis du har spørsmål om kommentarer du vil bidra til denne artikkelen , vær så snill å gi tilbakemelding i vårt diskusjonsforum.
Når du setter inn bilder, tabeller eller likninger i Word-dokumenter, kan du enkelt legge til automatisk nummererte bildetekster til disse elementene. De kan inneholde konsekvente etiketter, for eksempel ligning, figur og tabell. Du kan imidlertid også legge til egne tilpassede etiketter. RELATED: Slik legger du til en bildetekst i et bilde i Word 2013 Vi har tidligere vist deg hvordan du legger til et bildetekst i et bilde i Ord.
Selv om du har flere datamaskiner, trenger du bare ett TV-tunerkort for å se på TV på alle. Hvis du har satt opp NextPVR for å se live-tv i Kodi, kan du faktisk streame det live-TV og dets opptak til hvilken som helst datamaskin på nettverket ditt – fra nettleseren på din bærbare og mobile enheter, eller gjennom andre Kodi-bokser.
Windows 10 is uit, dus we gaan van onze Mac naar pc met dagelijkse regelmaat . Hoewel er nogal wat verschillen tussen zijn, struikelt niets ons meer dan knippen / kopiëren / plakken. Hier leest u hoe u knippen / kopiëren / plakken opnieuw toewijst, zodat ze op beide platforms hetzelfde zijn.
Een van de moeilijkste dingen om aan te wennen wanneer we van Mac naar Windows gaan of Windows naar Mac is knippen / kopiëren / plakken . Op een Mac wordt dit bereikt met behulp van de “Command +” -combinatie, terwijl dit in Windows wordt gedaan via “Control +”.
Als u geen Apple-toetsenbord gebruikt, zoals een toetsenbord met een Windows-toets, dan dat zal verdubbelen als de “Command” -toets op je Mac, maar Windows gebruikt nog steeds “Controle” als zijn modificatie, terwijl je misschien gewend bent om “Command” op je Mac te gebruiken, in Windows doet je meestal het begin menu.
Vandaag willen we laten zien hoe u eenvoudig een nieuwe remapping op zowel uw Mac als uw Windows-machine kunt uitvoeren, zodat knippen / kopiëren / plakken u niet struikelt. Dit kan natuurlijk ook worden toegepast op alle andere sneltoetsen die ook “Command” of “Control” gebruiken.
Op een Mac
Op een Mac is dit eenvoudig. We hebben uitvoerig gesproken over hoe configureerbaar het Mac-toetsenbord is en hoe je kunt veranderen en sneltoetsen kunt toewijzen voor een groot aantal items. Het is niet anders met modificatietoetsen. Open de toetsenbordvoorkeuren en klik op de knop “Modificatietoetsen . “.
U kunt de volgende vier modificatietoetsen wijzigen: “Caps Lock”, “Control”, “Option” en “Command”.
Voor onze doeleinden , we gaan alleen “Controle” wijzigen in “Opdracht” en “Opdracht” in “Besturen”.
Nu, telkens als we een sneltoets willen gebruiken zoals knippen, kopiëren, plakken of alles wat eerder nodig was de “Command” -toets, gebruiken we in plaats daarvan “Control” om het uit te voeren.
Op Windows
Windows biedt geen eenvoudige manier om sleutels opnieuw toe te wijzen zonder het register aan te passen, maar u kunt gebruik maken van derden software die snel de klus zal klaren. We raden SharpKeys aan, dat een eenvoudig te gebruiken interface biedt en overal alles aan doet.
Om uw “Control” -toets opnieuw in te stellen op uw “Windows” -sleutel, kunt u het eenvoudigst op de knop “Type Key” klikken. .
Druk eerst op de linker “Control” -knop in de linkerkolom en vervolgens op de “Windows” -toets in de rechterkolom.
Nu ziet u dat we de link “Control” opnieuw hebben toegewezen om op te treden als de “Windows” -toets.
We zijn nog steeds niet klaar. Hoewel de “Control” -toets opnieuw is toegewezen om te fungeren als onze “Windows” -sleutel, moeten we de “Windows” -toets opnieuw toewijzen aan de “Control” -toets. Anders heb je slechts twee sleutels die als de “Windows” -toets werken.
Het uiteindelijke resultaat ziet er als volgt uit:
Het laatste wat u moet doen, is klikken op de knop “Naar register schrijven”. U moet zich afmelden bij uw account of het systeem opnieuw opstarten.
Nadat u zich hebt afgemeld / aangemeld of opnieuw hebt opgestart, worden uw nieuwe sleuteltoewijzingen van kracht en kunt u naadloos van Mac naar pc of pc naar Mac gaan zonder irritante sneltoetsen voor toetsenbordtoetsen.
Je kunt SharpKeys gebruiken om alle gewenste toetsen opnieuw in te voeren, dus als je op een andere manier denkt dat je je Windows-toetsenbordervaring gemakkelijker kunt maken, weet je nu hoe dat moet. Vergeet niet dat als u “Controle” opnieuw toewijst aan “Windows”, alle sneltoetsen die ervan afhankelijk zijn, in plaats daarvan op de “Windows” -sleutel vertrouwen.
Als u vragen hebt over opmerkingen die u aan dit artikel wilt bijdragen , laat je feedback achter op ons discussieforum.
Rooten met uw Android-apparaat geeft u toegang tot een groter aantal apps en een diepere toegang tot het Android-systeem. Maar sommige apps, zoals Google’s Android Pay, werken helemaal niet op een geroot apparaat. Google gebruikt iets dat SafetyNet heet om te detecteren of uw apparaat is geroot of niet en blokkeert de toegang tot die functies.
Slimme thermostaten staan bekend om hun energiezuinigheid, maar als u een diepgaand inzicht wilt krijgen in hoeveel geld ze u hebben bespaard Met uw rekeningen kunt u met de Ecobee allerlei gebruiksinformatie bekijken. Met de Nest Thermostat kunt u ook de gebruiksgeschiedenis bekijken, maar het is lang niet zo diepgaand als de gebruiksgeschiedenisrapporten van de Ecobee.
This guide for customizing Windows can be useful even if you don’t use macOS
If you’re like me, you might be working on a different PC than you’re typically used to and wish there was some way to adjust it. Well, you’re in luck because I’ve got a handful of tips that will not only make Windows look better but will help you learn to love the operating system in a way you haven’t felt since the XP glory days.
This article is mainly for people switching to Windows 10 from macOS. However, if you’re a regular Windows user, you may not have heard of some of these useful tweaks.
A centred and transparent Taskbar
The Taskbar is the home for all of your open apps, notifications toggles, the Start menu and much more. While there are some customization options built into Windows to tweak how it looks, if you want to make it look modern, you need to download third-party apps.
I use one called TaskbarX that cost $1.39 CAD, but there are some other options out there, depending on what you’re looking for. TaskbarX does two main things: it centers your Taskbar icons and it makes the Taskbar transparent. To me, this looks a lot better, primarily when you hide the ‘Search’ bar. For macOS users, this makes the UI feature act a little more like the operating system they’re used to.
You can also turn the Taskbar into a solid colour or make it fogged if you want. If you want to take things to the next level, you can even adjust precisely where you want the icons if you want them off-set.
One thing I will mention is that when the Taskbar is transparent, it’s hard to read the text in the bottom left and right corners, depending on your wallpaper. You can mitigate this sometimes by switching from light to dark mode, but some wallpapers are just not going to work.
Automatic light and dark mode
As I was saying above, since light and dark modes change the colour of the text on the Taskbar you may not want to enable this if you’re using TaskbarX and an intricate wallpaper.
If you’re not and you just want an easy way to schedule dark mode to come on at night and light mode to enable in the morning, download Luna. This is a free app you can grab from GitHub, and it’s straightforward to use.
Once you install it, you just choose a time for the OS to switch into light mode and another time for dark mode. I decided 7am and 8pm respectively.
You can also allow Luna to switch the theme of Windows apps and the system theme to get a more cohesive experience.
You can get the wallpaper to change at the scheduled time as well. This helps if you’re using TaskbarX.
Luna is an easy tool to use, the only bad part is that many third-party apps don’t switch their light and dark themes automatically yet. Right now, apps like Slack, Facebook Messenger still don’t change when you shift the Windows theme.
Re-mapping Alt to act like Cmd on Mac
Remapping keyboard keys is something that’s strangely missing from default Windows, but with a handy app called SharpKeys, you can solve this problem in a few minutes.
Anyone who moves between Windows and Mac knows that it’s pretty annoying to have to unlearn the muscle memory of each operating system’s shortcut keys. So if you’re a Mac user who’s shifting over to Windows, it’s useful to swap the powers of the Alt and Ctrl keys.
Once you have the app open, you’ll need to click on ‘Add.’ Then, scroll down and select ‘Special: left Alt (00_38)’ in the ‘From’ column. In the ‘To’ section choose ‘Special: Left Ctrl(00_1D).’ You can also hit the ‘Type Key’ button and just tap the keys you’re looking for on your keyboard, but this didn’t work for me, so your mileage may vary.
This will make the left Ctrl key act as the Alt button. You’ll need to add another line to SharpKeys that’s the exact opposite of the first one to make Alt act like Ctrl. You’ll also need to repeat this process two more times for the right Ctrl and Alt keys.
Once you’ve done all of that, your SharpKeys app should look similar to the screenshot above and you can click ‘Write to Registry’ and then close the app. The last thing to do is restart your computer for the changes to take effect.
Organize the Start Menu
The final thing you can do to make Windows a little easier is to organize the Start Menu. When you start up a clean install of Windows, there are often random games and apps that you can get rid of to make things a little easier to navigate.
There are two sections in the Start Menu — the left side is the proper Start Menu, and the right side is called the ‘App list.’
You can’t customize the Start Menu, unfortunately, but you can clean it up. The first thing you want to do is get rid of some of the random folders. Often when you download apps from the internet, they install themselves as a folder with a few random apps and files alongside the app you want.
For example, I downloaded the game Apex Legends onto my P, which resulted in a folder called Apex Legends appearing in my start menu with a tech support document, the privacy policy and a user agreement. Luckily enough, it’s easy to get rid of all the bloat.
You just need to dive into your program files and delete and move a few things. The Start Menu is just a fancy way to display the files in your computer’s ‘Program Files’ and ‘Program Files (x86)’ folders. So if you organize those folders, the changes will be reflected on the Start Menu.
In my experience, there are a few folders and apps that don’t go away, but you can clean this area up considerably by moving apps from within folders and into the Program Files and Program Files (x86) folders.
The other side of the Start Menu is much more customizable. All you need to do is right-click on an app and choose ‘Pin to Start.’ The app then appears as a tile in App List. You can resize and place tiles here to your heart’s content. I’ve opted to replace the items I had pinned to my Mac Dock in this space, but you can do whatever you want.
You can also resize tiles to make some cooler layouts and you can re-colour them in the Windows Settings ‘Personalization’ menu.
Windows 10 je izklopljen, zato bomo z naših Macov prešli na osebne računalnike z dnevno pravilnostjo. Medtem ko je med njimi kar nekaj razlik, nas nič ne premakne več kot rezanje / kopiranje / lepljenje. Tukaj je, kako ponovno preslikati / kopirati / prilepiti, tako da so enaki na obeh platformah.
Ena najtežjih stvari, s katero se lahko navadimo, ko gremo z računalnika Mac na Windows ali Windows na Mac, je izrezano / kopiraj / prilepi. Na računalniku Mac to dosežemo s kombinacijo »Command +«, medtem ko je v operacijskem sistemu Windows to opravljeno prek »Control +«.
Če ne uporabljate tipkovnice z blagovno znamko Apple, kot je tista s tipko Windows, se bo ta podvojila kot tipka »Command« v računalniku Mac, vendar Windows še vedno uporablja »nadzor« kot spreminjevalec, tako da ste lahko V računalniku Mac, ki je včasih uporabil ukaz »Command«, je v sistemu Windows vse, kar je običajno, odprto v meniju »Start«.
Danes vam želimo pokazati, kako narediti nekaj preprostih preslikav na vašem računalniku Mac in računalniku z operacijskim sistemom Windows, tako da vas cut / copy / paste ne potiska. Seveda je to mogoče uporabiti za vse druge bližnjice na tipkovnici, ki uporabljajo tudi »Command« ali »Control«.
Na računalniku Mac
Pri Macu je to preprosto. Veliko smo govorili o tem, kako je tipkovnica Mac mogoče konfigurirati in kako lahko spremenite in dodelite bližnjice na tipkovnici za veliko število predmetov. S tipkami za spreminjanje ni nič drugače. Odprite nastavitve tipkovnice in kliknite »Tipke za spreminjanje«.
Spremenite lahko naslednje štiri modifikacijske tipke: »Caps Lock«, »Control«, »Option« in »Command«.
Za naše namene bomo spreminjali »Nadzor« na »Ukaz« in »Ukaz« na »Nadzor«.
Zdaj, ko želimo uporabiti katerokoli bližnjico na tipkovnici, kot je na primer izrezovanje, kopiranje, lepljenje ali karkoli, kar je prej zahtevalo tipko “Command”, bomo namesto tega uporabili “Control”, da bi jo izvedli.
V operacijskem sistemu Windows
Windows ne ponuja preprostega načina za preslikavo ključev brez spreminjanja registra, lahko pa uporabite programsko opremo drugih proizvajalcev, ki bo hitro opravila delo. Priporočamo SharpKeys, ki omogoča enostaven za uporabo in omogoča kratko delo.
Če želite preslikati tipko »Control« na tipko »Windows«, je najlažje klikniti gumb »Tip ključa«.
Najprej pritisnite levi gumb “Control” v levem stolpcu, nato pritisnite tipko “Windows” v desnem stolpcu.
Zdaj vidite, da smo levo tipko »Control« preslikali, da bi delovali kot tipka »Windows«.
Še vedno nismo končali. Čeprav je bila tipka “Control” spremenjena, da deluje kot naš “Windows” ključ, moramo še vedno premakniti tipko “Windows” na tipko “Control”. V nasprotnem primeru boste imeli samo dva ključa, ki delujejo kot tipka »Windows«.
Končni rezultat bo izgledal kot naslednji posnetek zaslona.
Zadnja stvar je, da kliknete gumb “Write to Registry”. Boste morali odjaviti iz svojega računa ali znova zagnati sistem.
Ko se odjavite / prijavite ali znova zaženete, bodo vaše nove preslikave ključev začele veljati in boste lahko brez težav prešli z računalnika Mac na osebni računalnik ali osebni računalnik na Mac brez nadležnih bližnjic na tipkovnici.
SharpKeys lahko uporabite za ponovno izdelavo želenih tipk, tako da, če obstajajo drugi načini, kako lahko občutite, da bo vaše okno s tipkovnico Windows lažje, potem zdaj veste, kako to storiti. Ne pozabite, ko enkrat preslikate »Control« v »Windows«, bodo vse bližnjice, ki so odvisne od tega, odvisne od ključa »Windows«.
Če imate kakršna koli vprašanja glede komentarjev, ki bi jih radi prispevali k temu članku, pustite svoje povratne informacije v našem forumu za razprave.
Windows 10 ist nicht mehr aktiv, also gehen wir von PCs zu PCs mit täglicher Regelmäßigkeit . Obwohl es einige Unterschiede zwischen ihnen gibt, stört uns nichts mehr als cut / copy / paste. Hier ist, wie man ausschneiden / kopieren / einfügen, so dass sie auf beiden Plattformen identisch sind.
Eines der schwierigsten Dinge, an die man sich gewöhnen muss, wenn wir von Mac zu Windows oder Windows zu Mac gehen, ist cut / copy / paste . Auf einem Mac wird dies mit der Kombination “Befehl +” erreicht, unter Windows mit “Strg +”.
Wenn Sie keine Tastatur von Apple verwenden, z. B. eine mit einer Windows-Taste, dann Das wird die “Befehl” -Taste auf Ihrem Mac, aber Windows verwendet immer noch “Control” als Modifikator, so dass Sie möglicherweise auf Ihrem Mac “Command” verwenden, unter Windows wird alles, was normalerweise tun wird, den Start öffnen menu.
Heute möchten wir Ihnen zeigen, wie Sie sowohl auf Ihrem Mac als auch auf Ihrem Windows-Rechner eine einfache Neuzuordnung vornehmen können, so dass Sie beim Ausschneiden / Kopieren / Einfügen nicht stolpern können. Natürlich kann dies auf alle anderen Tastenkombinationen angewendet werden, die “Befehl” oder “Steuerung” verwenden.
Auf einem Mac
Auf einem Mac ist dies einfach. Wir haben lange darüber gesprochen, wie konfigurierbar die Mac-Tastatur ist und wie Sie Tastenkombinationen für eine große Anzahl von Elementen ändern und zuweisen können. Mit den Modifier Keys ist das nicht anders. Öffnen Sie die Tastatureinstellungen und klicken Sie auf die Schaltfläche “Modifikatortasten . “.
Sie können die folgenden vier Modifikatortasten ändern: “Feststelltaste”, “Steuerung”, “Option” und “Befehl”.
Für unsere Zwecke Wir werden nur “Control” zu “Command” und “Command” zu “Control” ändern.
Nun, wann immer wir eine Tastenkombination wie Ausschneiden, Kopieren, Einfügen oder alles Erforderliche verwenden möchten Mit der Taste “Command” verwenden wir stattdessen “Control”.
Windows
Windows bietet keine einfache Möglichkeit, Schlüssel neu zuzuordnen, ohne die Registrierung zu ändern, aber Sie können auch Drittanbieter verwenden Software, die die Arbeit schnell erledigt. Wir empfehlen SharpKeys, das eine einfach zu bedienende Benutzeroberfläche bietet und alles schnell erledigt.
Um Ihre “Control” -Taste auf Ihre “Windows” -Taste umzuordnen, klicken Sie am einfachsten auf die Schaltfläche “Type Key” .
Drücken Sie zuerst die linke “Control” -Taste in der linken Spalte, dann drücken Sie die “Windows” -Taste in der rechten Spalte.
Nun sehen Sie, dass wir die linke “Control” -Taste neu zugeordnet haben die “Windows” -Taste.
Wir sind immer noch nicht fertig. Obwohl der “Control” -Schlüssel als “Windows” -Schlüssel neu zugeordnet wurde, müssen wir den “Windows” -Schlüssel noch auf die “Control” -Taste umstellen. Ansonsten haben Sie nur zwei Tasten, die wie die “Windows” -Taste funktionieren.
Das Endergebnis wird wie im folgenden Screenshot aussehen.
Das letzte, was Sie tun müssen, ist den “Write to Registry” -Button zu drücken. Sie werden aufgefordert, sich von Ihrem Konto abzumelden oder das System neu zu starten.
Nach dem Abmelden / Anmelden oder Neustart werden Ihre neuen Tastenzuordnungen wirksam und Sie können nahtlos von Mac zu PC oder PC zu Mac wechseln ärgerliche Tastaturkürzel.
Sie können SharpKeys verwenden, um beliebige Schlüssel neu zuzuordnen. Wenn Sie also andere Möglichkeiten haben, Ihre Windows-Tastaturerfahrung einfacher zu machen, dann wissen Sie jetzt, wie Sie das tun. Denken Sie daran, sobald Sie “Control” auf “Windows” setzen, werden alle darauf basierenden Shortcuts auf die “Windows” -Taste angewiesen.
Wenn Sie Fragen zu Kommentaren haben, möchten Sie zu diesem Artikel beitragen Bitte hinterlassen Sie Ihr Feedback in unserem Diskussionsforum.
Ubuntu hat in den letzten Jahren nicht den besten Ruf unter Linux-Nutzern gehabt – manche sogar so weit, es “langweilig” zu nennen. Wenn Sie zögern, es auszuprobieren, dann halten Sie sich an Ihre Plätze – Ubuntu 16.04 “Xenial Xerus” ist nicht nur eine aufregende Version, sondern eine, die das Potential hat, das Linux-Ökosystem zu verändern.
Die Große Firewall Chinas, offiziell bekannt unter dem Namen “Golden Shield”, verwendet eine Vielzahl von Tricks, um Chinas Internet zu zensieren und den Zugang zu blockieren zu verschiedenen ausländischen Websites. Wir werden uns einige der technischen Tricks ansehen, mit denen die Firewall das Internet in China zensiert.
If you’re like pretty much everyone, you probably have many windows open every time you use your Mac.
It might be a group of Word documents, a host of browser windows, or collection of pictures — whatever the case, having too many windows open means frustration when it comes time to switch between them.
If you have too many windows open, finding the file, webpage, or document you want at any given moment can take a surprisingly long time. That is, unless you know a few Mac keyboard shortcuts that make navigating between windows quick and easy.
Check out the products mentioned in this article:
MacBook Pro (From $699.99 at Best Buy)
How to quickly switch between windows on a Mac
There are several ways to switch windows on your Mac.
First of all, if you hit the F3 key (in the very top row on your keyboard), your windows will shrink so you can see them all. If you have multiple monitors, each monitor will show all the windows currently on that screen.
Once you’re in this view, you can click any window to switch to it, or press F3 again to return to your current window.
You can also switch windows using your Command key. Try hitting Command + Tab — a pop-up will appear showing every app that currently has windows open on your computer. Press Tab to cycle through them, and release Command when you’ve highlighted the one you want to switch to.
While you’re holding the Command key, tapping the tilde key will bring you to the next window of the same type. This is great if you’re working with lots of windows in the same program, like Word documents.
Finally, if you’re using a MacBook, swiping up on the trackpad with three or four fingers (depending on your settings) will open Mission Control, which shows all the windows that you have open. If this isn’t working, make sure it’s enabled in the “Trackpad” section of System Preferences.
- Tips
- Blog
- Hoe
- Ramen
- Telefoon
- Hoofd-
- Blog
- Hoe u uw Windows opnieuw kunt bewerken Knippen / kopiëren / plakken naar OS X-achtige besturingselementen en vice versa
Windows 10 is uit, dus we gaan van onze Macs naar pc’s met dagelijkse regelmaat. Hoewel er nogal wat verschillen tussen zijn, struikelt niets ons meer dan knippen / kopiëren / plakken. Hier leest u hoe u knippen / kopiëren / plakken opnieuw toewijzen, zodat ze op beide platforms hetzelfde zijn.
Een van de moeilijkste dingen om aan te wennen wanneer we van Mac naar Windows gaan of Windows naar Mac is knippen / kopiëren / plakken. Op een Mac wordt dit bereikt met behulp van de “Command +” -combinatie, terwijl dit op Windows wordt gedaan via “Control +”.
Als u geen Apple-toetsenbord gebruikt, zoals een toetsenbord met een Windows-toets, dan wordt dit wel de “Command” -toets op uw Mac, maar Windows gebruikt nog steeds “Control” als modifier, dus u kunt gebruikt om “Command” op uw Mac te gebruiken, in Windows is alles wat u normaal doet het startmenu openen.
Vandaag willen we je laten zien hoe je een aantal eenvoudige remapping op zowel je Mac als je Windows-machine kunt doen, zodat knippen / kopiëren / plakken je niet in de war brengt. Dit kan natuurlijk ook worden toegepast op alle andere sneltoetsen die ook “Command” of “Control” gebruiken.
Op een Mac
Op een Mac is dit eenvoudig. We hebben uitvoerig gesproken over hoe configureerbaar het Mac-toetsenbord is en hoe je kunt veranderen en sneltoetsen kunt toewijzen voor een groot aantal items. Het is niet anders met modificatietoetsen. Open de toetsenbordvoorkeuren en klik op de knop “Modificatietoetsen . “.
U kunt de volgende vier modificatietoetsen wijzigen: “Caps Lock”, “Control”, “Option” en “Command”.
Voor onze doeleinden gaan we alleen “Controle” wijzigen in “Opdracht” en “Opdracht” in “Besturen”.
Wanneer we nu een sneltoets gebruiken, zoals knippen, kopiëren, plakken of iets anders dat eerder de “Commando” -toets vereiste, gebruiken we in plaats daarvan “Controle” om het uit te voeren.
Op Windows
Windows biedt geen eenvoudige manier om sleutels opnieuw toe te wijzen zonder het register aan te passen, maar u kunt software van derden gebruiken die snel de klus zal klaren. We raden SharpKeys aan, dat een eenvoudig te gebruiken interface biedt en alles van korte duur maakt.
Om uw “Control” -toets opnieuw toe te wijzen aan uw “Windows” -sleutel, is het het eenvoudigst om op de knop “Type Key” te klikken.
Druk eerst op de linker “Control” -knop in de linkerkolom en druk vervolgens op de “Windows” -toets in de rechterkolom.
Nu zie je dat we de link “Control” opnieuw hebben toegewezen om te fungeren als de “Windows” -toets.
We zijn nog steeds niet klaar. Hoewel de “Control” -toets opnieuw is toegewezen om te fungeren als onze “Windows” -sleutel, moeten we nog steeds de “Windows” -toets opnieuw toewijzen aan de “Control” -toets. Anders heb je slechts twee sleutels die fungeren als de “Windows” -toets.
Het eindresultaat ziet eruit als de volgende schermafbeelding.
Het laatste wat u moet doen, is klikken op de knop “Naar register schrijven”. U moet zich afmelden bij uw account of het systeem opnieuw opstarten.
Nadat u zich hebt afgemeld / aangemeld of opnieuw bent opgestart, worden uw nieuwe sleuteltoewijzingen van kracht en kunt u naadloos van Mac naar pc of pc naar Mac gaan zonder vervelende gaffels met toetsenbordsnelkoppelingen.
Je kunt SharpKeys gebruiken om de gewenste toetsen opnieuw te maken, dus als er andere manieren zijn waarop je denkt dat je je Windows-toetsenbordervaring gemakkelijker kunt maken, weet je nu hoe dat moet. Houd er rekening mee dat wanneer u “Besturing” opnieuw toewijst aan “Windows”, alle sneltoetsen die er afhankelijk van zijn afhankelijk zijn van de “Windows” -sleutel.
Als je vragen hebt over opmerkingen die je aan dit artikel zou willen bijdragen, laat dan je feedback achter op ons discussieforum.
Here’s how you can modify Hosts files in Windows 10, and map domain names to server IP addresses of your choice.
- Open Notepad with administrator privileges
- Browse to C:WindowsSystem32driversetchosts (Or paste this into the address bar)
- Open the file
- Make your changes
Windows 10 still retains the old computing standard of having a hosts file for rudimentary hostname mapping. In simpler terms, the hosts file provides a mechanism to map domain names (such as “onmsft.com”) to server IP addresses of your choice.
Windows refers to the hosts file each time it connects over a network using a hostname. If it finds an entry for the hostname in the hosts file, it will contact the server specified in the file. Otherwise – and in the vast majority of cases – it will resolve the hostname using DNS (domain name service), which is the process used on the Internet to obtain the server IP address behind a domain name.
While it may sound technical, the hosts file is a really simple approach to network routing – and it’s easy to add your own entries. To get started, you just need to open the file. It resides in Windows’ internal “System32” folder, so to save your edits you’ll need administrator access.
The quickest way to open the file is using Notepad with administrator privileges. Search for Notepad (press the Start button and type its name) and right-click the app to display the context menu. Click “Run as administrator” to launch a privileged instance of the app. Note you may need to reauthenticate yourself or get an administrator’s password if you’re not already logged in as one.
With Notepad open in administrator mode, you’re ready to open the file. Click File > Open and browse to the file at C:WindowsSystem32driversetchosts (you can copy and paste this into the address bar at the top of the Open window). If you do browse through the folders graphically, remember to change the file type filter to “All Files” so the hosts file shows up.
Now you’re ready to edit the file. If you’ve never opened the hosts file before, all you’ll see is a short section of text describing its purpose and how to make edits. The introduction provides a useful overview of how the file is structured, but we’ll cover the basics here.
The hosts file is a simple mapping of IP addresses and hostnames. Each entry goes on a newline, with the IP address (that’s the numerical address) first, followed by a space or tab character and then the hostname (or domain). You can add comments to the file by placing a “#” character at the start of the line – this will make Windows ignore the line when reading the file.
Therefore, if you want to point “microsoft.com” to the IP 1.2.3.4, you’d write “1.2.3.4 microsoft.com” on a new line. Each time you try to visit microsoft.com, you’ll find yourself instead at the (non-existent) 1.2.3.4 website.
At this point, you may be wondering why you’d ever need to edit the hosts file. While it is more useful to technical users, there are also a few more general cases in which it might have value. One example is if you wanted to block a certain website, for example Google. By adding an entry for “google.com” to the hosts file, you can force Windows to point the address to a different location – so users won’t be able to visit the site.
To achieve this example, add a line such as “0.0.0.0 www.google.com” to the file. Save the file and try and visit Google in your browser. You should find the site fails to load.
Remember that this is a far from infallible way to block a site – another user could simply reverse the hosts file edit themselves. In addition, some software may employ its own techniques to lookup hostnames which might ignore the hosts file.
One far more realistic application of the hosts file is to block websites which serve up ads or spyware. Although we won’t be listing any here, if you map the addresses of prominent ad providers to an unused internal IP address (such as 127.0.0.1), you’ll suddenly be browsing an ad-free internet – in every browser.
Windows will resolve the ad URLs to an address that no longer points to the providers’ servers. Just remember that every address you add must be the hostname only (example.com), not the full web address (http://www.example.com).
That’s all about the hosts file. While you’re unlikely to use it outside of a development or network environment, it does have practical applications which could be of use to every PC consumer. You should also know that the hosts file also exists on Mac and Linux systems with the same syntax, albeit in a different location.
Yes, you can keep that Windows keyboard you love so much
Tom Nelson is an engineer, programmer, network manager, and computer network and systems designer who has written for Other World Computing,and others. Tom is also president of Coyote Moon, Inc., a Macintosh and Windows consulting firm.
:max_bytes(150000):strip_icc()/ryanperiansquare-de5f69cde760457facb17deac949263e-180a645bf10845498a859fbbcda36d46.jpg "How to remap your windows cut/copy/paste to os x-like controls and vice-versa")
- Western Governors University
- Tweet
- Share
- Tweet
- Share
In This Article
Jump to a Section
Newcomers and old pros alike use Windows keyboards with Macs. Why toss a perfectly good keyboard just because you switched platforms? Some people just prefer how the keys feel to the ones Apple supplies. Any wired USB keyboard or Bluetooth-based wireless keyboard will work fine with a Mac.
In fact, Apple even sells the Mac Mini without a keyboard or mouse. There’s just one little problem with using a non-Apple keyboard: figuring out some of the keyboard equivalents.
Windows and Mac Keyboard Differences
At least five keys have different names or symbols on a Windows keyboard than they do on a Mac keyboard, which can make it difficult to follow Mac-related instructions. For example, a software manual may tell you to hold down the command key ( ⌘ ), which appears to be missing from your Windows keyboard. It’s there; it just looks a little different.
Here are the five most commonly used special keys on a Mac and their Windows keyboard equivalents.
Mac Key
Windows Key
Use these to control various Mac functions, including using Mac OS X startup shortcuts.
Another helpful bit of information for new Mac users is to know which menu key symbols correspond to which keys on the keyboard. The symbols used in the Mac menus can be a bit strange to those new to the Mac, as well as old hands who may be more mousers than keyboard users.
The Command and Option Key Swap
Besides Windows and Mac keyboards having slightly different names, they also swap the positions of two often-used modifier keys: the Command and Option keys.
If you’re a long-time Mac user transitioning to a Windows keyboard, the Windows key, which is equivalent to the Mac’s Command key, may occupy the physical position of the Option key on a Mac keyboard. Likewise, the Windows keyboard’s Alt key is where you expect to find the Mac’s Command key. If you’re used to using the modifier keys from your old Mac keyboard, you’re likely to run into trouble for a while as you relearn the key locations.
How to Reassign Key Locations on a Mac
Instead of having to relearn key locations, use the Keyboard pane in System Preferences to reassign the modifier keys.
Launch System Preferences by clicking its icon in the Dock, or clicking the Apple menu on the left side of the menu bar then selecting System Preferences.
In the System Preferences window that opens, select the Keyboard preference pane.
Click the Modifier Keys button.
Use the pop-up menu next to the Option and Command keys to select the action you wish the modifier keys to perform. In this example, you want the Option key (the Alt key on a Windows keyboard) to execute the Command action, and the Command key (the Windows key on a Windows keyboard) to perform the Option action.
Don’t worry if this sounds a bit confusing, it will make more sense when you see the drop-down pane in front of you. Also, if things get a bit mixed up, click the Restore Defaults button to put everything back the way it was.
Make your changes and click the OK button, then close System Preferences.
With the modifier keys remapped, you shouldn’t have any problems using any Windows keyboard with your Mac.
Keyboard Shortcuts
People new to the Mac but proficient using keyboard shortcuts to speed up their workflow may be a little taken aback by the notation used in the Mac’s menu system to indicate when a keyboard shortcut is available.
If a keyboard shortcut is available for a menu item, the shortcut will be displayed next to the menu item using the following notation: