Categories
Life hack

How to stop network activity from waking your windows pc

How to stop network activity from waking your windows pc

If a slight bump to your desk is enough to wake up your sleeping PC, it’s likely your mouse doing the waking. Here’s how to prevent that from happening.

RELATED: How to Prevent Your Computer From Waking Up Accidentally

By default, moving your mouse is one of the reasons your PC wakes up from sleep mode. The trouble is that you barely have to touch the mouse at all to make it register. Bumping into your desk or even walking heavily in the same room is often enough trigger the wake-up call. Fortunately, it’s easy to disable this behavior and just have your PC wake up when you hit a key on your keyboard instead.

Hit Start, type “mouse,” and then click the selection to open the Mouse control panel app.

How to stop network activity from waking your windows pc

In the “Mouse Properties” window, switch to the “Hardware” tab.

How to stop network activity from waking your windows pc

Select the mouse you want to control from the list and then click the “Properties” button. You’ll see more than one mouse listed on some systems–say, a laptop that has a touchpad and an external mouse–so make sure you select the one you want to disable waking up for.

How to stop network activity from waking your windows pc

In the mouse’s properties window, click the “Change settings” button.

How to stop network activity from waking your windows pc

Switch to the Power Management tab and turn off the “Allow this device to wake the computer” option.

How to stop network activity from waking your windows pc

RELATED: How to Stop Network Activity from Waking Your Windows PC

Turning off your mouse’s ability to wake your PC is pretty straightforward, even if the option is a bit buried in the Mouse control panel app. The good news is that other devices that are allowed to wake your PC are controllable in a similar fashion. For some devices, you’ll find the option through the Control Panel. For others, like your network controller, you’ll access it through Device Manager. But now that you know what to look for, it shouldn’t be hard to locate.

My laptop model is Asus x507UF and OS is windows 10.
when is press sleep from start menu it goes to sleep but after a few second it automatically waking up without any interaction.
what can i do now?

“To keep your computer from waking up in sleep mode, go to Power & Sleep Settings. Then click Additional power settings > Change plan settings > Change advanced power settings and disable Allow wake timers under Sleep.”

There is a good chance that your PC’s Network Adapter is waking it. This is a Power & Sleep issue.

You may disable this ability by locating your PC’s Network Adapter in Device Manager and opening the Properties window. Then, click the Power Management tab and uncheck the box for “Allow this device to wake the computer”.

Anytime I have personally encountered this issue, the above has been a permanent solution

Just checking in to see if the information provided was helpful.

If the reply helped you, please remember to accept as answer.
If no, please reply and tell us the current situation in order to provide further help.

I can run all those commands and I can see when my pc was awakened but that doesn’t fix anything. My graphics card is fine. When I took all the apps out of the start window– that is open when it auto-wakes– it now wakes with start sidebar open instead, every time. My power settings are set to not allow wake timers, yet it wakes, even with my mouse turned off.

What did you guys do in the recent upgrade to cause this because i did nothing and have done everything I can find to stop it and nothing works — so it’s a win 10 thing now? Seemed to have started from irrelevant MS news, etc., that MS added without my consent in the last upgrade, that I’m not interested in and also had to figure out how to get rid of as well.

8 Answers

  • Sort by Created Created
  • Sort by Oldest Oldest
  • Sort by Votes Votes

Some of these may render something useful.

powercfg /requests
powercfg /lastwake
powercfg /sleepstudy
powercfg /systemsleepdiagnostics
powercfg /systempowerreport

–please don’t forget to Accept as answer if the reply is helpful–

do the trick for me. It shows what wake my PC up during sleep.

Very helpful information.
It helped me to find the culprit casusing my computer exceptional wake up.
powercfg /lastwake

@RifatFarazi-5290
Hi,
You could search Windows’ Event Viewer for information:
Click the Start menu, search for Event Viewer, and launch the tool. In the sidebar, head to Windows Logs > System, then click the Filter Current Log button on the right side of the window. Choose Power-Troubleshooter from the Event Sources drop-down menu and click OK to see all the times your computer woke up recently and what caused them.
To stop a device from waking your Windows 10 computer up from sleep mode, open the Device Manager and double-click a device. Then click the Power Management tab and untick the box next to Allow this device to wake up the computer.

First, type powercfg -devicequery wake_armed into the Command Prompt. This will tell you which devices are causing your Windows 10 computer to wake up.
2.Then press the Windows key + R on your keyboard.
3.Next, type devmgmt.msc into the search bar and click OK.
4.Select the device that’s causing your computer to wake up and double-click it. This will open up the device’s properties.
5.Then click the Power Management
6.Finally, untick Allow this device to wake up the computer and click OK.

Hope above information can help you.

============================================
If the Answer is helpful, please click “Accept Answer” and upvote it.
Note: Please follow the steps in our documentation to enable e-mail notifications if you want to receive the related email notification for this thread.

This worked perfectly, thanks! The only issue now is I can’t wake up my computer by pressing a key anymore, i have to press the power button, which is a fair trade off.

I have tried all kinds of advice and this finally worked. In my case, it was the mouse waking the PC from sleep every five minutes, and in this case, only one of the mouse drivers, So disabling the wake function still allows me to wake the PC using the active mouse device. Thank you.

Windows 10 disconnects network during sleep? Is there a way to keep network connection active even when the PC is in sleep mode? In this tutorial we’ll show you 3 ways to prevent Windows 10 from disconnecting network during sleep.

Method 1: Keep Network Connection Active When in Sleep Mode (On Battery & Plugged in)

Open the Power Options. Locate and expand the “Network connectivity in Standby” setting. By default, this setting is hidden and you can make it shown with this trick.

How to stop network activity from waking your windows pc

Click to select Enable for both “On battery” and “Plugged in“. Once saving the changes, your computer should stay connected to the network when in sleep mode.

Method 2: Prevent Sleep Mode from Disconnecting Network to Save Battery Power

Open the Settings app and navigate to System -> Power & sleep. On the right-side pane, click the option “When my PC is asleep and on battery power, disconnect from the network” and change it to Never.

How to stop network activity from waking your windows pc

Note that this option is only available for Windows 10 laptops and tablets with built-in battery.

Method 3: Use GPO to Allow Network Connectivity during Connected-Standby

    and browse to:
    Computer Configuration -> Administrative Templates -> System -> Power Management -> Sleep Settings
    On the right pane, you can find the two settings: “Allow network connectivity during connected-standby (on battery)” and “Allow network connectivity during connected-standby (plugged in)“. Double-click on each of them to modify.

If your computer still loses network connection in sleep mode, open the Device Manager and access the Properties of your Ethernet/Wi-Fi adapter. Make sure the “Allow the computer to turn off this device to save power” option is unchecked.

Problems with unexpected sleep resumes are fairly common on Windows devices, at least judging from the volume of reports on Microsoft’s support forums. The first step towards diagnosing any automated wake-ups is to find out what’s causing them. You’ll then be prepared to make adjustments to the offending source to stop it waking your PC in the future.

How to stop network activity from waking your windows pc

This guide requires use of the Command Prompt, as Windows doesn’t expose this information in any graphical interface. You’ll need to launch Command Prompt as an administrator – search for cmd in the Start menu, right-click the program result and click “Run as administrator.” Approve the UAC prompt which appears.

Finding out what woke your PC is achieved with a single command:

Type the command and press return. The output of the command will vary depending on the type of event that woke your computer. In the screenshot below, the culprit can be seen to be a USB hardware device. You may see a different kind of source, such as network activity or a scheduled wake timer.

How to stop network activity from waking your windows pc

This information should help you to identify the causes of any unexpected wake-ups. Your next steps will vary depending on the event type which is causing the wake-ups. We’ll cover two of the most common sources below.

Resolving device wake-ups

In most instances, a device-initiated wake-up can be readily resolved through Device Manager. Search for Device Manager in the Start menu and launch the program.

Using the information from the Command Prompt, you should be able to find the named device in Device Manager. Take care if the command indicates a generic hardware item, such as a USB root controller. In this case, it might be any of the USB devices attached to that controller which is causing the problem.

How to stop network activity from waking your windows pc

Once you’ve identified a suspect device, double-click it to open its Properties pane. Switch to the “Power Management” tab, if one is visible – if not, the device shouldn’t be able to wake your PC. Within the Power Management tab, clear the “Allow this device to wake the computer” checkbox.

Preventing wake timers from waking your PC

Another common cause of wake-ups is background wake timers. These can be configured by Windows and apps to wake your PC on a schedule. They’re commonly used for automatic maintenance routines.

How to stop network activity from waking your windows pc

To disable wake timers, search for Power Options in the Start menu and open the Control Panel link. Click “Change plan settings” next to your active power plan, then the “Change advanced power settings” link on the next screen.

How to stop network activity from waking your windows pc

In the popup prompt which appears, expand the “Sleep” item in the tree view, then “Allow wake timers.” Change the drop-down’s value to “Disable” and click “Apply” and “OK”.

These techniques should allow you to resolve many of the most common wake-up problems. However, Windows has a habit of refusing to obey sleep-related power settings, so you may find further investigation is required. Tools like Event Viewer will help you further narrow your search, using the wake source information acquired from the Command Prompt.

How to prevent your Windows 7 computer wakes up from sleep by itself

Prevent your Network Card from waking your Windows 7 up from its sleep

  1. Right click on your “My Computer” then select Properties.
  2. Click Device Manager on the left side of the Properties window.
  3. Check your Network card on the Network Adapters (Click on the + sign to expand).
  4. Right click on your network card and select properties.
  5. Go to the Power Management tab and untick the option there to prevent your network card from ever waking up your Windows.

Find out what wakes up your Windows 7/Vista from its sleep

To find out what event/device woke up your Windows from its sleep state, go to command prompt (type cmd on the Run/Search box and press ENTER), then type this:
powercfg –lastwake

To get the most detailed info (and probably easiest) on the device that wakes your Windows up during the sleep, type:
powercfg –devicequery wake_armed

If that command does not work, try using a “/” than a “-“, so:
powercfg /devicequery wake_armed

There! You’ll find the culprit 😉 I clicked my mouse to wake my Windows up intentionally so that’s why you see an HID compliant mouse on the screenshot above. Yours might be different.

  • Check out your Power Management Options on your Control Panel (Start, Control Panel, Power Settings, Change plan settings, Change advanced power settings).
    -> “Multimedia settings” option, “When sharing media.” ->”Allow the computer to sleep.
    -> Check other options one by one while you’re at it.

Hope this helps to prevent your Windows 7 computer wakes up from sleep by itself (also works on Windows Vista and Windows 8)

You may be unable to wake the computer from sleep or standby mode by using your mouse or keyboard.

After you wake your computer from standby, your pointing device may not work.

When you press the SLEEP key on a keyboard that has a Sleep key or has a key that is configured to activate Sleep, the computer does not go into Sleep mode.

Cause

This issue may occur if one or more of the following conditions are true:

You are running Windows Vista and have not updated to Service Pack 1 or a later version.

The Basic Input/output System (BIOS) system that is installed on the computer reduces power to the port to which the input device is connected.

Note You may be unable to use Bluetooth devices to resume operation from certain power management states (such as “suspend” or “hibernate”). In some low-power states, the wireless transceiver may be unable to receive information from the Bluetooth devices.

You are using a portable or notebook computer that does not allow resume by using a Bluetooth device. If you are having problems waking a laptop by using a Bluetooth device, see Method 3 first.

The Keyboard item in Control Panel is not configured to wake the computer when you press a key on the keyboard.

Your computer may have encountered a system problem.

The Sleep key on your keyboard is configured incorrectly.

Resolution

If pressing the Sleep key again does not resolve this, try each of the following methods in the order in which they are presented and determine whether the problem still exists before you try the next method. If you are using the original version of Vista and have not updated to the latest available Service Pack, updating to Service Pack 1 or a later version may resolve this problem.

For more information, click the following article numbers to view the articles in the Microsoft Knowledge Base:

928631 A USB device may no longer work correctly after Windows Vista resumes from sleep or from hibernation

871233 USB device is not recognized when you attach it immediately after your Windows XP-based computer resumes from standby or hibernation

929577 A Bluetooth device may no longer work correctly when you wake a Windows Vista-based computer from sleep

Method 1: Install the current software for your device and verify its configuration

First, download the latest version of the Microsoft IntelliType software, IntelliPoint software, or both for your keyboard, your mouse, or both. To do this, visit the following Microsoft Web site:

http://www.microsoft.com/hardware/download/download.aspx?category=MK After you install this software, run it, and then verify that the correct device is selected and that the settings are as you want them to be. If your keyboard does not have a dedicated Sleep key and you want to program Sleep for an alternative key, follow these steps:

Open the Keyboard control panel.

In Windows Vista or Windows 7, Click
Start , type keyboard in the Start Search box, and then click Keyboard or Microsoft Keyboard in the Programs list.

In Windows XP and earlier versions, click Start, click Run, type Control keyboard, and then click OK.

On the Key Settings tab, double-click the key that you want to change to access the Reassign a Key wizard.

Select the Start a Program, Web page, or file option, and then click Next.

To enable this key to start Sleep mode, run the following command:

rundll32.exe powrprof.dll,SetSuspendState Note In this command, there are spaces before and after powrprof.dll.

Method 2: Try alternative keys, mouse buttons, or the power button on your keyboard

To resolve this issue and resume computer operation, use one of the following methods:

Press the SLEEP keyboard shortcut.

Press a standard key on the keyboard.

Quickly press the power button on the computer.

Note If you use Bluetooth devices, the keyboard may be unable to wake the system.

Method 3: Verify that your device is allowed to wake the computer

To resolve this issue for, follow these steps:

Open the Keyboard control panel item, as described in Method 1.

Click the Hardware tab, and then click Properties.

Click the Change Settings button

Note This step requires Administrator access

Click the Power Management tab, and then verify that the Allow this device to wake the computer is enabled.

Click OK, and then click OK again.

Note If your computer does not support Advanced Configuration and Power Interface (ACPI), the earlier steps may not be available. In this case, you have press the power button to wake the computer. If you cannot resume computer operation by using any of these methods, you may have experienced a system problem.

For information about how your system resumes operation, see the documentation that accompanied your computer or contact the computer manufacturer. For information about Microsoft Windows Power Management settings, see Microsoft Windows Help.

Note Many laptop manufactures will not allow a Bluetooth device to wake the computer from sleep mode because of the power consumption requirements to keep the Bluetooth radio activated (Bluetooth paging can consume up to 15% of the computer’s power). Therefore there are a couple of workarounds that you can use:

If you can open the lid of your laptop, use the embedded keyboard or pointing device or an external non-Bluetooth device to wake the computer.

If you cannot open the lid (for example, because it is in a docking station) or if you have it plugged into external power (that is, you are not using the battery), you can change the Power settings in Windows to not go into Sleep mode when plugged in.

Alternatively the Microsoft Bluetooth stack or your laptop’s proprietary Bluetooth stack may allow customization to allow wake by using Bluetooth devices.

Method 4: Examine the BIOS settings of your computer for power features that disable or reduce power to ports that are used for your keyboard or mouse

Because BIOS access varies by computer, to resolve this issue, see the documentation that is included with your computer. Alternatively, contact your computer manufacturer for information about how to configure the BIOS.

For more information about hardware and software vendor contact information, visit the following Microsoft Web site:

More Information

The ability to recover from sleep mode by pressing a key on the keyboard or by moving the mouse on a computer that supports ACPI is dependent on the computer’s motherboard. This ability is disabled in older Intel motherboards, and the only way to wake the computer from sleep mode is to press the Power button.

With most newer motherboards, you can wake the computer by pressing the Power button, by pressing a key on the keyboard, or by moving the mouse.

ACPI support is necessary to take full advantage of the power management and Plug and Play features in Windows. If you are not sure whether your computer is ACPI-compliant, please see the printed documentation for your computer or motherboard, or contact the manufacturer of your computer or motherboard.

For more information about hardware and software vendor contact information, visit the following Microsoft Web site:

Did you notice that the network gets disconnected when your Windows PC is in sleep mode? Well, that’s a common scenario. However, there are times when you would want the network connection to be active even when the PC is in sleep mode. So, how do you configure your Windows 10 PC to prevent network disconnection during sleep mode? Here’s how.

Table of Contents

Method 1: Tweak Power management settings

1. Press Windows key + R key together to open run.

2. Now, write devmgmt.msc in it and click OK.

How to stop network activity from waking your windows pc

3. Now, Double click network adapters expand network adapters.

4. Now, right click on your WiFi adapter and click on properties.

In case you are connected via Ethernet , right click on Ethernet.

5. Click on Power management Tab.

6. Uncheck Allow the computer to turn off … option.

How to stop network activity from waking your windows pc

Method 2: How to Keep Network Connection Active Even when Windows 10 is in Sleep Mode using Power Plan

Step 1: Press the Windows key and click on Settings located above the Power button.

How to stop network activity from waking your windows pc

Step 2: Click on the System option to open the Systems window.

How to stop network activity from waking your windows pc

Step 3: On the left side of the screen, click on Power & sleep option. Next, on the right side of the scene, scroll down to the Related Settings category and click on Additional power settings.

How to stop network activity from waking your windows pc

Step 4: In the Power Options window, click on Change plan settings next to the active power plan. In this case, it’s set to Balanced.

How to stop network activity from waking your windows pc

Step 5. In the next window, under Edit plan settings, click on Change advanced power settings to open the Advanced settings dialog box for Power Options.

How to stop network activity from waking your windows pc

Step 6: Find and expand the option Networking connectivity in Standby under the Balanced option. Now, change both On Battery and Plugged in options to Enabled status. Click on Apply and then OK to save the changes.

How to stop network activity from waking your windows pc

This configuration will allow your PC to stay connected to the network even in the sleep mode.

What to do if Networking connectivity option is missing from power options

If this option is not present in power options, then do this.

1. Search cmd in windows 10 search box.

2. Now, right click and run as administrator.

How to stop network activity from waking your windows pc

3. Now, copy and paste the command given below and hit enter key to execute the command.

4. Close the cmd window.

Method 3: Stay connected to internet in sleep mode using gpedit

You can also force your computer to stay connected even in sleep mode using local group policy editor. So, if you are on a Windows 10 pro PC, and you are able to use group policy editor, then follow the steps given below to let your computer stay online even in sleep mode.

1. Search gpedit.msc in windows 10 search box.

2. Click on local group policy editor to open gpedit.

3. Now, go to the following location in group policy editor.

Computer Configuration > Administrative Templates > System > Power Management > Sleep Settings

4. Now, in the right side Locate two items namely :-

  • Allow network connectivity during connected-standby (on battery)
  • Allow network connectivity during connected-standby (plugged in)

How to stop network activity from waking your windows pc

5. Double click on them one by one and choose enabled and then click on OK.

To keep the data on your Windows 10 PC secure, with default settings, if you have set a password for your Microsoft or local user account, Windows 10 asks you to enter the account password after waking up from sleep or after a few minutes of inactivity.

The password after wakeup is a handy feature available in Windows for a long time, and one should keep it enabled to protect data.

But, if you’re a home user or if you are the only user of your Windows 10 PC at home or private office, you might want to stop Windows 10 from asking for the password after sleep or a few minutes of inactivity.

Users who are using a fingerprint to sign in to Windows 10 don’t find it much of a problem as they can sign in by simply swiping a finger on the fingerprint sensor. It’s users who have set a strong or long password want to stop Windows 10 from asking for the password after waking up from sleep.

Like earlier versions, you can turn off this default password asking the behavior of Windows 10.

The following are the two methods to stop or make Windows 10 ask for your password when you wake up your Windows 10 PC from sleep.

Method 1 of 2

Turn on or off password after sleep in Windows 10 via Settings

This is the only method that works post Anniversary Update for Windows 10. The traditional Control Panel method no longer works in 1607 and later versions as the Require a password on wakeup link is missing or has been removed from the Power Options window.

Important: When you stop Windows 10 (version 1607) from asking for a password using this method, Windows 10 doesn’t ask for the password even when you resume your PC after hibernation! So it might not be a wise idea if you hibernate your PC.

Step 1: Launch Settings app by either typing Settings in the Start menu or taskbar search box and then pressing enter key or simply clicking the Settings icon in the extreme left of the Start menu.

How to stop network activity from waking your windows pc

Step 2: At the home page of the Settings app, click Accounts.

Step 3: Click Sign-in options.

Step 4: Under, Require sign-in section, select the Never option if you want to stop Windows 10 from asking for the password after it wakes up from sleep.

How to stop network activity from waking your windows pc

And if you want to make Windows 10 ask for the password after sleep, select When PC wakes up from the sleep option from the drop-down box.

Tip: After stopping Windows 10 from asking for the password after sleep or a few minutes of inactivity, it’s a good idea to configure Windows 10 to start a screen saver after a few minutes of activity to avoid someone staring at your screen or data when you aren’t around the PC.

Method 2 of 2

Enable or disable password after sleep via Control Panel

Note that this method doesn’t work in Windows 10 Anniversary Update (version 1607) and later builds. Use this method only if you’re using Windows 10 1511 and earlier versions.

Step 1: Type Power Options in Start menu or taskbar search and then press Enter key to open the Power Options window.

How to stop network activity from waking your windows pc

Step 2: In the left pane, click Require a password on wakeup link to open the System Settings window. If Require a password on wakeup link is not showing up, please refer to the directions in Method 1.

How to stop network activity from waking your windows pc

Step 3: Here, click Change settings that are unavailable.

How to stop network activity from waking your windows pc

Step 4: Under Password protection on wakeup, select Require a password or Don’t require a password option.

How to stop network activity from waking your windows pc

Click the Save Changes button. That’s it!

How to automatically sign in to Windows 10 guide might also be of interest to you.

Related Articles

Comments

Finally fixed it. Ever since the Windows 10 Anniversary Update, the computer was asking for a password on wake-up even though I didn’t want one. It can be fixed with this registry edit: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\0E796BDB-100D-47D6-A2D5-F7D2DAA51F51]
“Attributes”=dword:00000002 . This brings back the “require a password on wake-up” option which was removed in the Anniversary Update. See the screenshot at http://imgur.com/a/tmt9r . Go to the advanced settings for the power plan in Control Panel, click on “Change settings that are currently unavailable”, and set “Require a password on wake-up” to “no”. Click Apply, OK and reboot for the change to take effect. It is a mystery why Microsoft has removed this from the Anniversary Update.

I’m having the same problem after the Anniversary Update and it is a pain in the butt. It looks like Microsoft has removed any easy option for disabling “require a password on wakeup”, which is a long standing feature of Windows. I’ve been unable to get either of these to work, like Reinus in the post above. This is a bug in the Anniversary Update.

Sorry, but neither of these work. I’ve tried more fixes for this annoyance. I’ve set this option. I’ve tried other fixes. Sadly, nothing seems to get rid of the password after sleep “feature”. Someday . . .

Window 10 sleep mode is a good way to preserve energy and maintain the good state of PC hardware. When you are not working, you either put PC in sleep mode or hibernate mode.

Sleep mode in Windows 10 is a convenient power option to pick up right where you left off.

Sometimes sleep mode takes time to wake up in Windows 10. It is has also been observed that computer won’t wake up from sleep mode after multiple attempts.

To fix this, we have created a quick tutorial on how to wake up Windows 10 from sleep mode if it is not responding.

Wake up Windows 10 from Sleep Mode

Fix 1: Allow Mouse and Keyboard to wake up your PC

Mouse and keyboard are directly connected to your PC and the only hardware that is visible to you.

On some occasions, due to malfunctioning of mouse and keyword are involved in these type of issues. They prevent you in waking up your PC.

To fix this, follow the step below:

  • You have to press Windows Key + R at the same time and then type devmgmt.msc and press Enter.
  • This will open Device Manager and a list driver installed in it. Go to Keyboards > Your keyword device (In my case “HID Keyword Device”)
  • Click the Power Management card and check “Allow this device to wake the computer“.
  • Repeat the same process with Mouse devices. Generally, it comes under “Mice and other pointing devices“.

Fix 2: Disable fast startup feature

Fast startup feature is the new feature in Windows 10. It’s work is to boost the start-up process but currently it has been reported that it messes up some other features of Windows 10.

So, it is good to turn off Windows 10 fast startup feature.

  • You have to press Windows key + R simultaneously, and then type powercfg.cpl and click OK.
  • Here, it will open Power Options and now click on “Choose what the power buttons do“.
  • Again, click on Change settings that are currently unavailable.
  • Now, you have to uncheck “Turn on fast startup” and then click “Save changes“.

Fix 3: Restore default setting of power plan

It may be possible that due to incorrect power plan settings, your computer is not able to wake up from sleep mode.

You need to restore it to a default setting.

For this, follow the setting below

  • Go to “Power option” from control panel and click on “Change when the computer sleeps“.
  • Here, you can click on “Restore default settings for this plan” and click “Yes” to confirm the changes.

Fix 4: Use Windows 10 Troubleshooting tool

Windows 10 has an in-build troubleshooting tool that helps you fix many problems. You can use troubleshooting to fix wake up problem in Windows 10 from sleep mode.

For this, you can follow below troubleshoot steps:

  • Press Windows Key + I to open Windows Setting

2. In “Windows Setting” click on “Update and security“. After that, click on “Troubleshoot” and it will open list of options.

  • From list of options, you can select “Power” to run the troubleshooter.
  • Troubleshooter automatically detects any problem and fix it. You need to restart the Windows to complete the process.

Fix 5: Display Driver Issue

Sometimes display driver has not been updated properly or there is an issue with an update. You can fix this issue simply by manually updating the driver to a latest version.

Follow the steps below to fix it:

1. Press Windows key + R, and type devmgmt.msc

2. This will open “Device Manager” and shows a list of drivers. You need to click on “Display Adapters“, which will expand it further.

3. Next, right click on display driver and click “Update driver“. It will automatically update the driver to the latest version and if there is any problem due to display driver, it will fix automatically.

Fix 6: Turn off Hibernation

In Hibernation mode, Windows 10 may find it difficulty in waking up. So, you need to turn off hibernation mode in order for Windows to work properly.

1. Press Windows Key + R to open command prompt and type “powercfg /h off” and click OK

2. It will turn off hibernation mode without giving any message. You need to simply restart your PC to have an effect.

Hope, the above solution will fix your Windows 10 wake up problem from sleep mode.

If you have some other issues or solution, please share with us in the comments section.