Categories
Life hack

How to use a glue gun

How to Use a Glue Gun

Glue guns are the mainstay of the crafting world, making thousands of projects possible. They work with materials ranging from paper and lace to wood and metal. It is inexpensive to get started, and with glue sticks readily available, using a glue gun could not be easier to use.

A glue gun is a hand-held tool into which you feed a solid glue stick. A heating element in the body of the gun melts the glue, and the adhesive flows out the glue gun’s metal, cone-shaped tip as the glue stick is forced through the gun.

Glue Gun Types

Glue guns come in all sizes, from a mini-gun just a few inches long to industrial pistol-grip models. While some manufacturers offer battery-powered glue guns, most models are plug-in units powered by standard home power outlets.

There are a number of options to consider when you choose a glue gun.

  • High-temperature vs. low-temperature gun: If you are working with children or on delicate materials, choose a low-temperature gun, which melts the glue sticks at about 250 F. High-temperature guns, suited for bonding more substantial materials like wood, operate at around 380 F—a significant difference. Dual-temperature guns offer both options and usually cost just slightly more.
  • Trigger-feed vs. manual-feed gun: Another feature to consider is whether you want a trigger-fed gun or a push-fed model. With the trigger feed, you slip the glue stick into the hole at the back of the gun, and each pull of the trigger advances the stick into the heater and out through the nozzle. Trigger-free models are also simple, you push the glue stick with your thumb.

Advantages

Part of the glue gun’s appeal is its price: you can pick one up for literally a buck or two, and a large pack of glue sticks costs just a few dollars. A glue gun has almost infinite uses and comes in handy not only for crafting but also for a variety of home repair jobs. Using one is as easy as pointing and squeezing.

The glue is surprisingly strong and has great staying power, even out in the elements. It bonds immediately and cools to the touch relatively quickly. For people bored with usual clear glue, sticks are available in different colors and some come impregnated with glitter.

Here are just a few projects for which a glue gun is useful:

How to Start Gluing

Whether you’re gluing wood together or being creative, a glue gun has many uses for small repairs, home improvements or creative projects. You can even create jewellery out of glue! Learn how to use a glue gun with this simple tutorial. We’ve broken down each stage to make the process as easy as possible for you. Enjoy!

How to Use a Glue Gun

Tip 1: Prepare your glue gun

Before you use your glue gun, always check that it is free from damage such as cracks or chips. Check the electrical cord for fraying or rips. If the glue gun has been used before, make sure the device is unplugged and clear the nozzle of any old glue residue. (Always clean your glue gun right after using it; see tip 10.) This will provide a clear pathway for the newly melted glue. You can do this with a dry cloth (never use water on a glue gun).

How to Use a Glue Gun

Tip 2: Choose the right glue stick

Now that the glue gun is prepared, you’re ready to insert the glue stick. Depending on your project, you will need either multi-purpose, coloured or wood glue. See our Comparative Fact Sheet to compare them. Also, glue guns have different temperature settings (see next tip). Check if you have the right type of glue stick by referring to the glue stick packaging or the product page on Dremeleurope.com. And make sure to never pull out a half-used glue stick from the glue gun when it’s still hot, as this can spill hot glue onto your skin or surfaces.

How to Use a Glue Gun

Tip 3: Set your glue gun at the right temperature

Coloured glue sticks require a lower temperature (105 degrees Celsius) than neutral glue, because then the glue will stay nice and bright. When working with coloured glue, it’s best to use the Dremel Glue Gun 930 , which has two temperature settings. To find out the right temperature setting for your type of glue stick, it’s best to refer to the packaging of the glue sticks or see our Comparative Fact Sheet . It takes about five minutes for your glue to fully warm up. The nozzle will be very hot, so be careful not to lean it against any material or touch it without heat-resistant gloves.

How to Use a Glue Gun

Tip 4: Test the glue gun

Now for the exciting bit! With the nozzle pointing downwards, gradually apply pressure to the trigger and test the hot glue on a piece of scrap material, such as cardboard, to see if it’s ready to use. You’ll know when the glue is ready when it turns to liquid and is released when you pull the trigger. Now try practicing with the glue gun until you feel confident – remember to pull the trigger gently to control the flow of glue. A little bit of glue goes a long way! Always keep the nozzle at a safe distance from any material as it is very hot and could leave burn marks on your material.

How to Use a Glue Gun

Tip 5: Protect your work surface

Now that you are ready to use the glue gun, protect any surfaces with a covering such as a cutting mat or, for smaller projects, a glue pad. That way you are protected from any spills and – with the glue pad – the glue simply wipes off the silicone surface. Also, use the stand of your glue gun to rest it on when you are not working with it. Never put the glue gun on its side as the glue could drip, or the nozzle could create a burn mark.

How to Use a Glue Gun

Tip 6: How to glue glass, plastic, metal, leather, wood and other materials

Whether you are gluing glass, metal, plastic, leather or wood, it’s important to have a dry and grease-free surface as oily, smooth surfaces don’t bond together as easily. If you’re working with glass, rub it with alcohol or glass cleaner. Otherwise, use water and soap. Or if you’re working with wood, lightly sand the area to be glued, and clean it. Then, apply the glue and press the surfaces together until the glue sets hard. For larger materials, this may require a clamp, for smaller ones a rubber band should be sufficient. Leave for 24 hours to allow the glue to harden properly.

How to Use a Glue Gun

Tip 7: Use your glue gun for basic repairs

A glue gun, particularly the Dremel Glue Gun 940 , is perfect for small repair jobs around the house as it can be used cordless and has a higher temperature setting. It works particularly well on interior wood and plastics but it can also repair carpets and flooring. Planning to fix skirting boards? Try hot glue for a smooth, nail-free fix. And next time you’re putting furniture together, you can use hot glue on small joints, trim and mounting.

How to Use a Glue Gun

Tip 8: Use your glue gun for household hacks

You’ll be amazed at what you can do with a hot melt glue gun. For example, try using hot glue as a nonslip household hack. Simply apply hot glue to the bottom of socks, slippers, rugs or the sides of clothes hangers, let the glue dry and slip no more! Check out these smart glue gun hacks for more inspiration .

How to Use a Glue Gun

Tip 9: Create objects out of hot glue with molds

If you’re eager to get creative with hot glue, a fun project for beginners is to create 3D objects to attach to, for example, photo frames, hairpins or earrings. You can do this by simply filling up a silicone mould with (coloured) hot glue. You can use ice cube moulds, cookie moulds, cake-decoration moulds or any other mould you like. Insert the hot glue into the mould by tipping the glue gun and directing it into any corners first, then fill in the centre. Watch this masterclass to learn exactly how to do this.

How to Use a Glue Gun

Tip 10: How to remove glue from your glue gun

When you’ve finished gluing, always unplug the glue gun before cleaning it. To prevent the glue on the nozzle from setting, wipe the glue off quickly with a dry cloth. The nozzle will still be warm, so be careful – always wear heat-resistant gloves! Learn more in this article . If any excess glue has already set on your material and overlaps, you can trim it with a pair of scissors. For strings of glue, briefly heat the glue up with a hair dryer to melt it, and then wipe it away with a cloth.

Glue guns have a significant role in the world of crafts. It can be very helpful for making thousands of DIY projects and crafts. Hot glue guns use a continuous heating technology that melts the glue into liquid, which can be used on various materials like paper, woods, laces, and metals. But you need to select the right glue gun for your projects. So, if you are wondering how to select and use a hot glue gun, then you are at the right place.

How To Select A Hot Glue Gun?

How to Use a Glue Gun

There are many hot glue guns available in the market with different characteristics and features. You need to select the best one according to your need and requirements. Here are some of the factors that you need to consider while selecting a glue gun:

Low Vs. High-Temperature Glue Gun

There are two types of hot glue guns available: (a) The low-temperature glue gun that operates at 121 degree Celsius or 250 degrees Fahrenheit. (b) The high-temperaturee glue gun that operates at 193 degree Celsius or 380 degrees Fahrenheit.

Low temperature glue gun is ideal for kids, it is also great for working on heat sensitive items like lace, clothes, and ribbons. Whereas high temperature glue gun is best for woods, papers, leather, and metals.

Corded vs. Cordless

In the competition between corded and cordless, cordless always sounds great. But cordless glue guns operate on batteries which can drain very quickly, so you have to replace them frequently. So, you can consider a model that offers both corded and cordless facility. When needed, you can detach the cord for working on the suitable project. If you are buying a corded glue gun, then select the model with a longer cord.

Changeable Tips

If different tips can be used on a gun then, that is the best choice. You can control the flow of the glue by simply changing the tips. It provides more flexibility when you are working on different projects. So, choose a hot glue gun that comes with a removable or changeable tip.

With A Stand

If you are choosing a hot glue gun for your project, make sure it has a stand. This offers safe storage of the gun when you are using it. It is quite handy when you are using the tool for a long period of time. It also avoids any damage to the tip of the gun.

How To Use Hot Glue Gun?

How to Use a Glue Gun

After you have selected your preferred hot glue gun, the next step is to learn how to use it properly. Since this is a hot glue gun which involves electrical use (if corded), it can be quite hazardous. Thus, you need to be very careful while using it. Here are step-by-step methods to use the hot glue gun:

  1. First, inspect whether or not the glue gun is completely fine and working.
  2. Then load the glue stick into the back of the gun.
  3. If it is corded, then plug the hot glue gun into a nearby electrical outlet.
  4. After plugging in, wait for some time while the glue gets heated up. It normally takes 4 to 5 minutes.
  5. Now, press the trigger of the gun lightly for releasing the melted glue on a piece of paper to test the texture.
  6. Once it is perfect, start doing your project. The melted glue will dry within few seconds.

Some Important Tips:

  • Never ever touch the hot metal tip of the gun when it is working as it can burn your finger.
  • Don’t press the trigger too hard. Excess glue can come out of the nozzle and it can mess up the whole set.
  • Start with a small amount of glue and squeeze more if you need.
  • Make sure to keep your fingers away from the hot glue.
  • Avoid pulling the gun too far from the surface. The glue can stretch and create a spider-web.

Conclusion

Thus, selecting and using a hot glue gun is quite easy. These hot glue guns can be quite handy for some crafts, DIY projects and small repairs. If you know the proper use of this glue gun, it can be quite helpful. Even due to the strong adhesive job, you can use this for small repairs of your house.

How to Use a Glue Gun

I know it should be common sense. I just bought a new glue gun. I have never used one before. It has a high & low heat setting. I put the glue stick it and nothing comes out. What more do I have to do to get this to work. I am technically challenged.

Try pushing the glue stick in as you repeatedly pull the trigger, it may need to be “force fed” at the beginning.

Conversly, I pull it backwards or turn off the gun if I’m in the middle of setting up the next application and I don’t want it dripping on my work surface.

How to Use a Glue Gun

Yeah. that’s what I have to do as well. Also. saw a cool tip somewhere that you can add a dab of the hot glue to the end of a couple of the sticks and stick them together end to end and you’ll have a super long glue stick.

You’ll need to check the glue sticks that you have. They will say if they’re high heat, low heat or multi heat.

Wait a minute or so for the heat to begin melting the stick. Keep pressing the trigger and it will start to come out. Have a paper plate or something you don’t care much about to catch drippings and sit the gun down as you finish a job.

How to Use a Glue Gun

Yes it takes a while to heat up. I use an old aluminum pie pan to set mine in as it heats. Most have a little “kickstand” to keep them upright but the pan is protection from it falling over and drips.

Make Glue Gun Art

How to Use a Glue Gun

A mask made entirely of hot glue.

Top 10 Creative Hot Glue Gun Uses

6. Create Scrapbook Embellishments

7. Create a Mold in Seconds

8. Decorate Windows for Holidays

4. Make Expensive-Looking Christmas Ornaments

5. Halloween Spider Webbing

How to Use a Glue Gun

1. Hem Pants

You’re in a rush and just realized your hem has gone down for the count. Get out that glue gun and go to town. Later on, just peel the dots of glue off or leave it on while you sew. Use only small dabs and not full lines of glue: This makes removing the glue easier, and it won’t stain the clothing. When I have done this in the past, I usually forget, and the glue just remains unseen. Washing the clothing has no effect on the glue’s adhesion.

2. Fix Buttons

You’re running out the door and notice you have a button that is about to fall off. No time to sew it? Just run some hot glue over the threads and go. Your button will stay in place, and when you have time to sew it, the glue will just pop off the plastic. Unlike clear nail polish, the hot glue won’t damage the button.

3. Emboss Cards

The glue gun is perfect for embossing just about anything: In other words, it adds a decorative raised ridge to any surface. Once you are happy with how it looks, just apply nail polish over it for a high gloss lacquer finish or use a colored stick. You can also use a glitter stick.

Embossing can be done in several ways. You can write words or draw a design on a flat, nonporous surface, let it dry, and peel it up. You can then attach your design to a card with a little bit of glue. This way you can trim it to perfection.

Another way is just to write directly on the card itself. The only problem with this is that hot glue on paper doesn’t clean off well if you make a mistake. It usually takes some of the paper with it if you remove it.

How to Use a Glue Gun

4. Make Expensive-Looking Christmas Ornaments

Glue guns are great on glass and if you make a mistake, just peel it off. Apply it to the outside of plain glass Christmas ornaments to give them a 3-D effect. I usually use colored or glitter glue.

If you don’t have the right colors, you can use clear glue and then apply nail polish over it. You can apply glitter while the glue is wet or afterward using some gloss mod podge glue.

5. Halloween Spider Webbing

Most crafters hate those threads you get using low temp guns, but even high temp guns will spin webs for you, so why not use it to your advantage at Halloween? Apply a dab of hot glue to anchor the web and while blowing on the glue, pull it to a different anchor point. Keep repeating it until your web is done. When Halloween is over, just run your hand through the glue, and it cleans up fast.

6. Create Scrapbook Embellishments

I bought a silicone mold, and it was so delicate that I was never able to make anything from it. That was until I used the glue gun. No matter how delicate the mold, the glue gun captured the design perfectly. Apply nail polish as a final step and you have the perfect embellishment in just minutes.

If you want, you can use two different colors of hot glue in the mold, just be careful not to overfill it. (I have put in too much glue, and the embellishment didn’t sit right on the paper.) It’s best to underfill rather than overfill. Make sure the glue gets into all the corners. You can do this by taping the mold against the table surface.

Another trick is to dip the tip of the glue gun into the flow of the glue and not above it. If the glue is allowed to drip, it cools slightly and doesn’t flow as well. I use the tip of my hot gun to keep it flowing. Test your mold material first before you do this. If the gun is too hot, it can melt the plastic on some molds.

It is fine to use plastic candy molds. You may want to use a drop of mold-release such as cooking spray: It won’t effect the embellishment, and it prevents the glue from sticking to the plastic of the candy mold.

How to Use a Glue Gun

7. Create a Mold in Seconds

Do you like to use polymer clay? Or maybe you do cake decorating? Did you know that instead of buying expensive molds, you can make them with hot glue for only pennies? Squirt out a large dollop of hot glue and then push whatever it is that you want to mold into it. Wait for it to harden and you have your mold. This works best with smaller objects because the glue cools quickly.

If you’re going to make molds, use high temp glue. It flows easier than low temp and stays liquid longer, so you have time to make a larger dollop and set your object.

You can also make the mold but color in the area where the object was with a sharpie marker for a different-looking embellishment.

8. Decorate Windows for Holidays

Apply the glue from a glue gun directly to your windows to create holiday magic. It peels off glass quite easily. Did you know glue sticks come in all sorts of colors, plus some that glow in the dark?

9. Make Jewelry

Hot glue makes wonderful jewelry. We made a bracelet entirely of hot glue. Kids love it!

10. Opening Up A Can

Place strips of hot glue over the palm of a cotton glove. The glue will grip the top of any stuck jar.

How to Use Hot and Low Temperature Glue Guns

  • Use a high heat gun when you are working with metal and wood.
  • High heat glue sticks are harder and a little stronger.
  • Low temp can be used on paper and plastics.

A Note on Hot Glue Gun Burns

I have been working with glue guns since I was a young teen and even though I use them all the time, I still get burned. The temp of a high temp gun is over 300 degrees while a low temp is around 170 degrees. There is a huge difference between being burned by a high temp gun and a low temp one. When I work with a high temp gun, I keep ice water next to me. The burns can be severe and will continue to burn until the glue hardens. If you try to pull it off, it doesn’t work, and you get burned on the hand you use to pull the glue off with as well. But if you dunk the hand immediately in the ice water, you can halt the burn and remove the glue faster. Keep ice water on hand at all times.

How to Use a Glue Gun

A hot glue gun is really an essential tool that is necessary for all kinds of people especially for a craftsman, house owner, and also DIYer. Moreover, learning to use this handy tool is not a tough task, you just need to know the proper way of using a hot glue gun.

It may cause an acute burn or fire if you do not use it correctly. Therefore, it is essential for you to know the proper use of a hot glue gun. So, keep reading for more!

Basically, hot glue comes from Hot Melt Adhesive (HMA), which is the form of thermoplastic adhesive and it is usually sold as solid cylindrical sticks of different diameters.

Also, it is designed to apply for a specific use. There are various types of hot glue guns available in the market. You can choose a heavy-duty hot glue gun for you from there.

For a crafter’s use, smaller and larger are the two varieties of a hot glue gun. The larger glue gun can absorb more heat than the smaller one.

At the same time, with low melt glue sticks, you can use the larger guns. And the smaller one is fit for gluing paper and scrapbooking and even on cardboard because they emit a little bit of glue streams.

Some of the cordless hot glue guns are used in the workshop. You will be glad to know that, I also use a cordless one. So, it’s time to share with you the process step by step that how you can use your own hot glue gun properly. So, let’s know the using tips!

Step One

Considering the demand for your project, you will need to choose the appropriate gun which will cope with the ongoing project perfectly. Before using your hot glue gun, you must read the manufacturer’s instructions carefully.

Sometimes, you will notice that there is a little bit of variation of the different manufacturer’s guidelines. But, always you must read the instruction and follow them before starting to use the gun.

Step Two

You must protect your working area because the glue is very quick to set up and it can ruin the surface in a moment. To protect the working area, crafters generally work over a thick piece of cardboard.

You should remember that, when you are not using your glue gun, you should keep it in an aluminum foil. But, if you haven’t it, you can set it in an old metal pie pan or cookie sheet. You have to do that because your glue gun will continue to exude a bit hot glue after every use. While crafting, you may wear long sleeves and gloves if you want to get more security.

When you use the gun for carpentry work, then you may wear gloves and goggles or eye protection. Also, you can keep a bowl of ice water nearby because the glue can spatter. Unfortunately, if the melted glue falls on your skin, you must plunge the attacked area into the water to mitigate the burn and to make it peel away instantly.

Step Three

If you use craft type or smaller guns, it will take 5 to 8 minutes to be ready to use. At the same time, for the carpentry types or larger guns, it will take around 4 minutes to be prepared to use. According to the instructions, insert a glue stick into the opening.

Please note that, if you use a glue stick with your new or empty glue gun, most of the glue will melt and fill the chamber. So, you will need to use the second glue stick quickly.

Don’t worry; the glue isn’t being wasted! It is filling in the chamber, and you can use it! Also, it is important for you to remember that the hot melt glue will dry quicker than the low melt glue.

Step Four

If you are ready to glue, then pick up the gun. At the same time, you need to efface the first part of melted glue and move it to what you are gluing. Compressing the trigger slowly, get the proper amount of glue what you will need and then keep gluing continue in a wiping motion.

Final verdict

Hope, already you have gotten the easiest ways of learning how to use a hot glue gun. Most probably, you are delighted to introduce the above important information that you were searching earnestly.

I tried to narrate for you easily how I use my own. Methinks, now you are completely clear and understand the using ways, and you are ready to use your hot glue gun properly.

Have a nice time with your hot glue gun! 🙂

Best Practices for Using Hot Glue Sticks with Fabric

We are often asked, “Can glue guns be used on fabric?” The simple answer is yes but you will need to know a few things first about the type of glue gun and glue stick you are using. Once you find the right glue gun and glue stick, hot melt is excellent at bonding fabric and other porous materials.

Glue Guns and Fabric

There are three major types of hot glue guns, standard temperature (also called high temp), low temperature, and adjustable temperature. When bonding fabric or other sensitive materials, low temperature or adjustable temperature glue guns are highly recommended. Standard temperature glue guns dispense at around 380 Degrees Fahrenheit while low-temperature glue guns have a working temperature around 260 Degrees Fahrenheit. That 120-degree difference can be the difference between the perfect bond to fabric or burning right through your material. Now that you know which type of glue gun to use, it’s time to match up the right glue stick

Glue Sticks and Fabric

We know that low-temperature glue guns can help from burning a hole in fabric and sensitive material, but now we need to make sure we are using the correct glue stick. Low-temperature glue guns must be used with low-temperature glue sticks. These types of glue sticks are specifically formulated for melting at lower temperatures making them fabric safe. There are even all-temperature glue sticks that can be used in both high and low-temperature glue guns. We think these are great for adjustable temperature glue guns so you don’t have to own two separate glue guns.

Spray Hot Melt for Fabric Applications

Hot melt is traditionally dispensed in bead form, which works well for some fabric applications but spray dispensing offers many unique benefits. Spray hot melt is great for fabric that is heat-sensitive because it disperses the hot melt over a wider surface area. You can also change the width of the spray application to spray in a narrow or wide pattern depending on your application needs. A great glue gun for spray applications is the Surebonder Spray 500. It comes with two nozzles that are interchangeable, for both bead and spray dispensing. You can also purchase a replacement nozzle, so you’re never unable to use your glue gun because of a misplaced nozzle.

The SprayMelt 70 APAO Hot Melt is a staple for spray applications and fabric. The low viscosity formula and long open time make it ideal for a variety of applications, including fabric. It works well with the Surebonder 500 in both spray and bead applications. The SprayMelt 90 Acrylic Hot Melt is another great option for fabric and it is a high-performance formula optimized for difficult to bond substrates.

Additional Tips when Working with Fabric

You must always be careful when using hot glue and fabric. Here are some additional tips to help make your project a success.

  • Try gluing a test piece of fabric before jumping into your project.
  • Be careful not to touch the glue gun nozzle to your material as this is often hotter than the glue and can cause burns.
  • If you are bonding fabric to a sturdier, more temperature resistant material, apply the hot melt to the other substrate first and then let it cool slightly before applying your fabric. Don’t wait too long though, the hot melt may set, and then you will not get a strong bond.

Additional Recommended Products

Still Have Questions?

If you still have questions about what hot melt will work best for your fabric application, contact us. A member of our team will be able to assist you in choosing the right system for your application.

How to pick the right type of glue for your card making projects

  • Pin
  • Share
  • Email

How to Use a Glue Gun

If you are starting out making your own handmade greeting cards, one of the items you will need to add to your crafting workbox is adhesive.

While sticking a couple of elements together to make a card may seem like a pretty straightforward task, it can be surprisingly tricky. The type of adhesive you require will depend both on what you want to do with it and how you want the card to be used. For example, if you are making a special card that someone is likely to want to keep as a memento or keepsake, you will want to make sure that you use an adhesive that will not discolor or lose its adhesive properties. However, if you are making a card that you don’t expect to be kept, the long term qualities of the adhesive will be less important.

What Adhesive Is Best for Cardmaking?

Here are some of the different types of adhesives you may see in a craft store and how they can be used:

  • Stick glue: Stick glues are, as the name suggests, sticks of glue which are pushed up and down in the same manner as lipsticks. They are easy to use and widely available in a range of different sizes. While it is difficult to be very precise with a glue stick (they are not good for very fine work), they are certainly very convenient and are perfect for adhering paper and cardstock together. When you apply glue sticks remember not to press too hard so you don’t end up with lumps of glue on the page. Glue sticks do not work on porous materials such as acetate.
  • Hot glue: Hot glue is a great addition to your workbox. You will need a glue gun in order to melt the glue sticks. Hot glue is particularly good for attaching items such as fabric or ribbon to handmade cards. Hot glue bonds items together because it melts when heated and it sets solid when it is cool, therefore bonding items pressed into the melted glue. Hot glue sets into a rigid form and therefore may crack if it is used in a project which may bend or flex.
  • PVA and tacky glue: PVA glues are a versatile type of glue and can be used in a wide variety of projects. These glues are white (sometimes referred to as white glue) and they dry with a transparent finish. PVA glue is water-soluble so it can be thinned with water if required, for example for decoupage projects. PVA glues are handy for card making projects, however, remember not to use too much as they can cause paper and cardstock to warp.
  • Double-sided tape: Double-sided tapes are ideal for attaching elements to handmade cards, for example for layering paper or adding a card topper or photograph. The tapes are available in a variety of widths. The only drawback of using double-sided tape is that it is less easy to rectify mistakes than other adhesives. Thick double-sided tape is useful if you want to add dimension to your project, for example, if you are layering pieces together and you want to add depth.
  • Glue dots: If you want to raise the surface of an element in your card making project then glue or adhesive dots are perfect. These are ‘blobs’ of adhesive which will adhere to a variety of surfaces.
  • Glue pens, runners and other precise adhesive applicators: If you are working on a very detailed card you may require the precise application of adhesive. There are a number of products, such as glue pens and adhesive tape runners which help with the precise application of glue.

How to Use a Glue Gun

Decorative Glue Products

While when you are starting out, you will be looking for glue products for their adhesive qualities, there are also some glues that are used predominantly for their decorative qualities. Glue pads, for example, can be used in the same way as normal rubber stamping ink pads, however, they leave an adhesive surface on the page which can be coated in glitter or flocking powder. A highly popular decorative glue is glitter glue and this is a mess-free way to add sparkle to your handmade cards. Just be careful to not spill.

These are just a few of the different types of glue you will find available which can be used in your card making projects. If you are unsure of what type of glue to use, ask for advice in your local craft store or take a look at one of the online glue advice websites such as This to That or Glue It to It from Michaels.

How to Use a Glue Gun

The Gorilla Dual Temp Mini Glue Gun is an ideal tool for crafts and repairs. It is light weight, with a comfort grip and a built-in stand making it easy to use. The easy squeeze trigger and long insulated nozzle allow a precise application on whatever project you are working on.

Sizes

PRODUCT FEATURES

  • DUAL TEMP
  • PRECISION NOZZLE
  • EASY SQUEEZE TRIGGER
  • ENHANCED SAFETY FEATURES
  • BUILT-IN STAND
  • WIDE BASE

DIRECTIONS

1. Plug into 120V electrical outlet.
2. Insert 0.27” diameter mini glue stick into back of glue gun through the feeder tube.
3. Allow glue gun to heat for approximately 5 minutes.
4. Squeeze trigger to dispense glue. More glue is dispensed by squeezing trigger repeatedly. Continue glue flow by adding additional glue sticks. Note: Requires approximately 2 glue sticks for initial start up.
5. Immediately press surfaces to be bonded together.
6. Do not pull glue sticks from glue gun. If changing glue, feed remainder of glue stick through glue gun.
7. Unplug after use and allow glue gun to cool completely before storing.

Dual Temp Glue Gun: Use High Temperature for Wood, Plastic, Metal, Glass & more. Use Low Temperature for Floral, Fabric, Foam, Jewelry and more.

Troubleshooting

Glue gun will not heat up: Make sure glue gun is plugged into a 120V electrical outlet. If glue gun still does not work, the internal fuse of the glue gun may be blown and the glue gun is not repairable. Do not use.
Glue backs up at inlet tube: Glue sticks may be the wrong size. Use only the recommended 0.27” diameter mini glue sticks. Note: Do not elevate front of glue gun. Always use side stands or attached stand.

⚠ CAUTION

Do not touch heated glue gun nozzle or melted glue; temperature can reach 380ºF . If accidental contact occurs, do not remove glue. Immediately put burned area into cold water. Always wear protective clothing, safety glasses, gloves, long sleeve shirt, and long pants. Keep away from flammable materials. Manufacturer assumes no responsibility for consequential or indirect damages from the use of this product.

Will glue drip from the nozzle?
All glue guns will drip a little. When you first plug in the glue gun, the adhesive in the glue gun chamber will expand, causing it to drip. This must occur or the glue gun will have problem feeding into the glue gun.

What size glue sticks do I need?
Mini Glue Sticks should be used in Gorilla Dual Temp Mini Glue Gun size 0.27” – 0.29” in diameter.

When should I use low vs. high temperature?
Low temperature setting should be used for delicate materials like floral, fabric, foam, jewelry and more. High temperature setting should be used for strong bonding like wood, plastic, metal, glass and more.

How should I store Gorilla Hot Glue Gun?
Unplug after use and allow glue gun to cool completely before storing. Half used sticks can be stored in the glue gun. Do not expose to rain, moisture or direct sun light.

Is Gorilla Hot Glue food safe?
Gorilla Hot Glue is not recommended for direct or indirect food contact and should not be considered food safe.

SAFETY INFORMATION

1. Work environment should be clean, dry, well lit and clear of flammable materials.
2. Do not use outdoors or near water.
3. Do not expose glue gun to rain, moisture or direct sunlight.
4. Keep away from children and store out of reach when not in use.
5. Do not carry glue gun by cord or unplug from outlet by pulling electrical cord.
6. Disconnect glue gun when not in use.
7. Glue gun is on when plugged in. Do not leave unattended.
8. Do not use hot melt glue to replace structural fasteners.
9. Do not use extension cords.
10. Do not use any material other than recommended glue sticks.
11. Avoid accidental discharge. Do not touch glue stick or trigger unless intending to dispense glue. Feeding or pushing glue stick with too much force into heated gun may cause hot glue to be unexpectedly expelled from nozzle or to flow back from inlet tube
12. Allow glue gun to cool completely before storing.
13. Save these Safety Instructions for future reference.

How to Use a Glue Gun

I know it should be common sense. I just bought a new glue gun. I have never used one before. It has a high & low heat setting. I put the glue stick it and nothing comes out. What more do I have to do to get this to work. I am technically challenged.

Try pushing the glue stick in as you repeatedly pull the trigger, it may need to be “force fed” at the beginning.

Conversly, I pull it backwards or turn off the gun if I’m in the middle of setting up the next application and I don’t want it dripping on my work surface.

How to Use a Glue Gun

Yeah. that’s what I have to do as well. Also. saw a cool tip somewhere that you can add a dab of the hot glue to the end of a couple of the sticks and stick them together end to end and you’ll have a super long glue stick.

You’ll need to check the glue sticks that you have. They will say if they’re high heat, low heat or multi heat.

Wait a minute or so for the heat to begin melting the stick. Keep pressing the trigger and it will start to come out. Have a paper plate or something you don’t care much about to catch drippings and sit the gun down as you finish a job.

How to Use a Glue Gun

Yes it takes a while to heat up. I use an old aluminum pie pan to set mine in as it heats. Most have a little “kickstand” to keep them upright but the pan is protection from it falling over and drips.

How to Use a Glue Gun

Everything You Need to Know About Using a Hot Glue Gun Safely

When using a hot glue gun during your next craft project or home improvement task, make sure you and your children stay safe with these glue gun safety tips. There are different safety measures to be taken depending on what kind of glue gun you will be using, but the goal is always to prevent electric shock, skin burns and eye injuries.

Before you begin

The first and most important step to safely using your glue gun is to read the instructions and warnings provided by your glue gun’s manufacturer in or on the original packaging.

A careful inspection of the glue gun should be your next step. Before plugging it in, check to make sure the gun isn’t broken, or too worn. Look for frayed electrical cord or any cracks in the gun or nozzle. If you find these signs of excessive wear, do not use the glue gun. Plug the gun in and check to see if the on/off button (if your gun has one) is working correctly.

Remember that glue guns called “warm” or “low melt” guns can still be dangerous and result in burns or electrical shocks.

Carefully choose the kind of gun you need for your project – if you don’t need a high heat gun, opt for one of the “warm” or “low melt” options to reduce (but not eliminate) your chances of injury.

Prepping your workspace

Keep in mind the people (or pets!) who may be coming in contact with your workspace while you’re working. Make sure your glue gun is placed a safe distance from the reach of children, animals or the inadvertent reach of other adults. Be sure that you don’t use an extension cord with your glue gun and that you don’t leave the power cord hanging where it could be snagged or pulled by children or passers-by. Choose a work area near a power outlet so that you don’t need an extension cord. It’s also important to choose a workspace that’s indoors (never outdoors) and far from sinks, faucets or any kind of water source.

All surfaces in your workspace should be made of, or covered with, non-flammable material. A good option for this is ceramic tile. Place a square of tile, or aluminum foil in the place where you will set down your glue gun when not using, to catch any unintentional drips.

Clear away any loose papers or other materials that could catch fire.

Place a bowl of ice water near your workspace – but NOT near your glue gun – while your working. If you accidentally get glue on your skin, dip the burned area in the cold water.

Protection

Some of the most common injuries people experience with glue guns are skin burns, electrical shock and eye injuries. Wearing protection can help eliminate these injuries. Wear safety goggles/glasses to protect against eye injuries. Wear a surgical or dust mask over your nose and mouth if you’re using a type of glue (usually industrial) that gives off fumes. Gloves can be worn to protect against burns, but make sure you use the right kind of gloves. Rubber or plastic gloves can melt, which can potentially lead to an even more serious injury if hot glue comes in contact with them. Leather and canvas are better options. Long sleeve shirts, closed-toe shoes and long pants if you’re sitting down working. Finally, tie back any long hair while working with hot glue guns.

While you’re working

Most importantly, do not touch the hot nozzle or hot glue when working with your glue gun.

Never point the gun in the direction of another person.

Do not leave your glue gun plugged in and unattended – this can be a fire hazard and be dangerous for pets, children or other people who may come in contact with the hot appliance.

When not using the gun, make sure to set it down upright on its metal rack, instead of lying on its side.

If you’re using a dual-temp glue gun, you can change the temperature of the glue depending on what materials you’re using. If you need a stronger bond with materials like ceramics, leather, metal or wood, use a higher heat, but if you’re using more fragile materials like paper, flimsy fabric or lace, leave it on a lower heat setting.

Only use glue sticks that are recommended for your particular glue gun.

Keep your glue gun out of direct sunlight or any moist conditions to reduce the risk of electrical shock or fire.

Don’t pull glue sticks out from the glue gun once the gun is plugged in and glue has begun to melt. Always keep feeding glue through the gun before inserting a new stick in behind it.

Children and glue guns

Keep glue guns out of the reach of children and read safety precautions provided by the glue gun manufacturer. Some low temperature guns are suitable for older children, but only with adult supervision.

When you’re finished

Always unplug the gun when you’re finished with your project or when you need to change the nozzle on your glue gun. With most glue guns, the gun is on and hot whenever it is plugged in, so never leave it plugged in and unattended.

In case of a burn

If you get hot glue on your skin, hold the burned area in ice water. If there is a serious burn, contact a medical professional immediately. Medical attention should also be sought if glue makes contact with eyes.

Daily Video

This video i will show you how to make 5 Life Hacks to Use a Hot Glue Gun / Tricks You Need to Know!
The hot glue gun is a really cool tool to have in any workshop. No matter whether you need instant holding power, insulation, or the properties of soft plastic, the hot glue gun is one practical tool to have at your disposal. Let’s take a look at a couple of different interesting life hacks to use the hot glue gun!

1) How to clean the glue gun with aluminum foil!
My glue gun is one of my most used DIY tools. I use so often.
With all of the various projects I use it on, it ends up getting gunky. Between the glue itself and the rest of the supplies I use, like glitter and a lot of stuff gets stuck to the tip of the glue gun.
To keep my glue gun clean so that the gunk doesn’t get onto each new project, I occasionally use this new fangled contraption – a ball of aluminum foil.
I plug in the glue gun to heat it up. Then, I very carefully push the ball of aluminum foil onto the nozzle and twist it around to wipe it clean. Be careful not to actually touch the tip with your fingers, and use a lot of foil so that it protects your fingers from the heat of the gun.
It’s not necessary to clean the glue gun after every project.

2) Hot Glue Ring – a DIY Jewelry Experiment!
First rub the tube of glue stick with body cream was to help the glue come off. And then I use hot glue gun to draw either shapes, dots or swirls the on tube of glue stick in shapes of ring.
Allow the glue to cool completely and then peel off of tube of glue stick.
I had the brilliant idea of using rhinestones on clear glue. This ring is so beautiful and easy idea!!

3) Glue Gun Trick
If something wobbles…add a little extra glue to balance it out or if something hitting into something else…add a little hot glue to act as a bumper.
Hope this comes in handy!

4) You can also paint over your designs to create custom jars.
All you need is a glass vase/jar/cup/wine bottle, a hot glue gun and 2 of sprays paint. Well it might actually take you a few minutes to decide what pattern you will make on the vase with the glue.
Set your glue gun on medium or low and have plenty of back up sticks.
Slowly follow you pattern. Don’t worry if you mess up, when the hot glue dries you can simply peel it off.
Take outside to a ventilated area and apply two coats on the outside of the vase with spray paint. I used a golden paint and let it dry about 5 minutes and then I used a pink paint between each coat to avoid drips.
Set upon a shelf to admire or gather a handful of flowers and give to your mother or do what ever you like with it 🙂

5) How to resize a ring with glue gun?
Got a loose ring? This genius hack lets you easily size down a ring with just some hot glue. Work on parchment or wax paper. It’s not permanent as you can peel off the glue. A good solution for rings which you want to wear on different fingers.
This is just a temporary hack. It won’t hurt solid metal rings but it might well take off the plating of cheap rings. So be warned.
There are some other products on the market like the silicone one linked below. However, the best way is to get a professional jeweler to resize rings.

5 Simple Tips with hot glue You Need to Know.

I just got a glue gun, and I dont know how to use it . Also after I’m done using it what do I do? Because im scared I might Clog the tip of the Glue Gun. Someone help me?

5 Answers

How to Use a Glue Gun

I agree with Irish but just wanted to add that both high-temp and low-temp glue guns generally *do* use the same glue sticks (as long as they’re the right shape for either gun).

It’s just that the high-temp guns will heat those glue sticks hotter (which will cause fewer “strings” but also can melt certain things like “Styrofoam” till the glue cools a bit, etc) than the low temp guns will.

You can’t really clog the tip, since when the glue gun heats up again any glue touching the gun will melt.

I just keep my glue gun standing up (nose down) in a terra cotta pot during use (or on a piece of board or something) so the tip won’t touch anything while it’s still hot . I usually weight the pot inside with a rock too but allowing the gun to stand up a bit makes it easier to grab over and over than laying it flat on something.

How to Use a Glue Gun

You won’t clog the tip of the glue gun. When the glue cools, it will get hard inside the tip, but when you plug it in again, the glue melts and you’re good to role.

Leave the gun plugged in the whole time you are using it. It works best when at peak heat and the glue will flow the best. Unplug gun when completely done or if you walk away. The glue won’t burn inside the gun.

Do NOT try to remove the glue stick when you are done. Leave it in the glue gun and just let everything cool off before you put it away.

Make sure to put down a paper plate or parchment paper/freezer paper/newspaper where you are working because the glue can be stringy and sometimes it drips a bit while working. The tip on a high temp glue gun can mar a surface, such as corian or wood, also.

Don’t force the glue. If it’s not moving through the gun smoothly, it’s not hot enough and not completely melted.

Be sure you have the right kind of glue stick for the glue gun you bought. There are high temp and low temp guns and corresponding sticks. And make sure the glue stick is the right diameter. Don’t try pushing a skinny stick into a gun designed to use the bigger ones.

Most glue guns have a little metal stand attached to them near the tip. Extend that and set you gun down on it to support the gun at the correct and comfortable angle for picking it back up again and keeping the tip pointing down so it doesn’t leak everywhere.

Learn some amazing at home craft ideas

Today we bring you some tips on how to use a glue gun. This way you can incorporate it into your crafts and discover a world of creations to which you apply.
It is an adhesive that adheres to most materials in a very quick, secure and permanent way. We encourage you to learn how to use!

Materials

  • Gun
  • Silicone glue stick

Step by step

The first thing to do is plug in your glue gun to an electrical outlet. We must ensure we do it in a safe place, away from flammable objects which can stain rugs, tables or tissues.

Once gun is plugged you must insert a silicone or adhesive on the back of it. If there is one already inserted, have a second one in reserve in case the first one runs out.

After loading the gun, we have to gather the materials that we will stick. Silicone works exceptionally well the heavy fabrics, dried flowers, Styrofoam, wood and plastics. For paper, textiles or ceramics it should work fine, however with care and moderation as it tends to leave heavy residues in these cases are not conceal.

Before pulling the trigger, it is important to ensure that the glue has melted. For this we let out a little silicone squeezing the trigger on a piece of paper or fabric, glue should come off easily from the gun. If not, it’s probably not hot enough so you have to wait a little longer.

When you have made sure the glue is liquid, put the silicone glue on drawing lines of the object. Next you need to immediately place the other object to make it stick and press firmly holding the pieces together for about 15 seconds.

When you remove your hand the two pieces will probably be joined together, but if it do not, you can achieve this by putting a little more pressure to adhere.

Once the glue has dried you can use a file to remove the excess glue on the craft that you have worked on to be displayed or decorated.

Tips & Warnings

  • It is vital not to touch the hot glue because it can cause deep burns. Touch it using a cloth or tissue.
  • Also, once you finish using the gun, let it cool down and make sure that it is cool before storing to avoid problems.

Over time will take on ease of handling of this tool and see how simple it is and yet how useful it becomes in the world of crafts. The bottom line is creating things with our own hands will mean this tool will undoubtedly become a very helpful and useful once you know how to use it.

Dare to experiment with the glue gun and then tell us how went!

How to Use a Glue Gun

The glue gun is beyond doubt handy for households. The glue gun is often considered imperative when it comes to mending or binding things. Glues are messy and hard to remove if you are not careful with them especially super glue. The glue gun however, has some amazing attributes. It is a high performance sophisticated tool used by industries and households. They are coveted mostly because they allow a controlled flow of adhesives through the nozzle. Tubes and sticks are hardly as effective as these glue guns.

Glue Gun-Types and Their Purposes

There are various kinds of glue guns and not every glue gun is suitable for your purpose. You must exercise prudence here, because if you need a glue gun for binding metals then you should choose one, which is high caliber. An advanced glue gun, which melts adhesives at 380 degrees, is apt for the purpose. Similarly, to fix or repair small items you will require a standard glue gun, which is neither high end nor technically sophisticated. The good news is that you will come across guns, which can perform both these tasks; however, they might be a bit more on the expensive side. In addition, you will find both battery powered glue guns and guns, which run on electricity.

Here are a few tips on using a glue gun for school projects and for heavy-duty repair work. Firstly, for school projects and minor household repairs try to get a basic model that has a manual push system. This means that once you feed the gun with the glue stick you will have to keep pushing it manually into the compartment as it melts. For trivial tasks, a mini gun will suit you perfectly. To bond heavy metal together you must use a gun, which is sufficiently powerful to hold the metals together. You will have to go through the gun specifications carefully before making a purchase. Also for industrial use, you need an automated trigger version because the trigger pushes the stick into the dispenser department as it heats and melts. As industrial guns are huge in size, manual operation is out of the question.

Both the size and power of the guns vary greatly. In addition, the corresponding glue sticks vary in strength and adhesive power. Some glue sticks are manufactured specially with robust industrial adhesives and they are highly unsuitable for household use. This is one handy product, which you must not buy on a whim. In general, the cheap glue guns are for simple household projects.

Safety Precautions While Working With Glue Guns…

Accidents happen with glue guns. However, if you are watchful they can be averted. Remind your children that glue guns are not for playing and there will be dire consequences if they spray hot glue playfully on someone. Kids must be cautioned that the glue can burn them if they touch the nozzle or the glue that has made its way through the nozzle. Tell kids never to touch the blistering glue before it solidifies. Each time they use the glue, they must rinse their hands thoroughly as adhesives have harsh chemicals that can harm the skin and eyes causing irritations and allergies. If it gets into the eye, immediately try to wash it out with water. If you sense persistent irritations consult a doctor immediately.

The virtues of the glue gun…

With a glue gun, you can perform a number of activities with ease. You can glue paper, beads, wood, glass, cloth, conch shells, tiles, even lightweight bricks and stone. You can also bind together some heavy metals; just make sure you have a heavy-duty glue gun for these sorts of projects.

Step-by-Step guidance on How to use a glue gun

  1. First, remove any inflammable material which might be lying around and find a secure heatproof place to set your hot glue gun, make sure your glue gun is off and plug the gun in.
  2. Put a glue stick in the glue stick compartment and keep another one handy incase you run out of glue before you are finished your project.
  3. To see if the glue gun is ready to be used see if the glue has started melting by pressing the trigger slightly. A small portion of glue should appear.
  4. With the gun, apply glue along the sides of the material by gently pressing the trigger.
  5. Then place the item to be fused on top of the glued material and hold it in position firmly for a minimum of 15 seconds.
  6. You will find that the two materials are now joined together.

To sum it up, a glue gun is a classic item, which has extensive uses. This indispensable item is also inexpensive and almost anyone can afford this coveted piece of equipment. You can spot these at any hardware store near you.

How to Use a Glue Gun

If you are a crafter or home DIYer, you need to know the proper way to use a hot glue gun . This is a good tool and no home workshop should be without one. It is also a tool that, used improperly, can cause severe burns or a fire. There are several types of hot glue guns. There are the type crafters use and that can be bought in any craft or discount stores and there are glue guns for carpenters.

Types of Glue Guns

The crafter’s glue guns come in two varieties; larger ones that have high heat and small ones that use warm or low melt glue sticks. You can use the larger ones with low melt glue sticks. The smaller guns are good for projects like scrapbooking and gluing paper and cardboard because they emit a smaller glue stream. Another type is the type carpenters use in the workshop, and they are usually cordless. They are also a heavier duty gun and heat up faster due to higher temperatures. These guns have varying types of glue sticks you can use depending upon the type of surface you are gluing.

Step 1 – Choose your Weapon

How to Use a Glue Gun

Choose the correct gun for the project you are doing. It is not uncommon to have all three in a household. Always use the manufacturer’s instructions and read them thoroughly before beginning because there are some variations in use between manufacturers.

Step 2 – Prepare your Space

Protect the area where you are working because the glue will set up very quickly and can ruin a surface. Crafters usually work over a thick piece of cardboard to protect the area. Have a piece of aluminum foil, or use an old metal pie pan or cookie sheet, to set the gun on when not in use because it will continue to drip a little hot glue. You may wish to wear long sleeves and gloves if crafting.

If you are using the gun for carpentry work, gloves and goggles or eye protection are a good idea. The glue can spatter with those types of guns. It’s also wise to keep a bowl of ice water nearby, so if you get the melted glue on your skin, you can plunge the area into the water to ease the burn and to make it easy to peel away the glue.

Step 3 – Heat up the Gun

How to Use a Glue Gun

Craft type guns will take five to eight minutes and carpentry types will take around four minutes. Insert a glue stick into the opening, per the instructions. If this is the first time using the glue gun it may take most of the first stick to fill the chamber with melted glue, so don’t be surprised if you have to insert a second stick quickly. The hot melt glue actually sets up or dries more quickly than the low melt type.

Step 4 – Glue

When you are ready to glue, pick up the gun, wipe the nozzle free of melted glue and move it to what you are gluing. Compress the trigger slightly to get the amount of glue you will need, then in a wiping motion, do your gluing. You want to try to avoid glue strings from your object back to the holder where the glue gun rests. The hot glue cools very quickly so aim efficiently and move quickly.

February 13, 2018

There are so many creative projects that can be done using a glue gun but when you get to the store and you’re faced with a rack full of them, what do you choose? Well we pulled together some of our favorite Surebonder hot glue guns to help make this choice a little less overwhelming and help you bring your spectacular creations to life.

We have five categories of glue guns; Essential Series, Plus Ultra Series, Professional Series and Specialty Series for crafts and industrial for tougher jobs. Each series is special and has different features so you have an option for any budget to complete the project of your dreams. Lets first explore the Essential Series.

First you want to establish what type of project you want to complete and if you need a delicate but strong bond or you need a tougher bond due to the materials you plan to use. A low temperature glue gun will provide a strong bond but not destroy delicate material such as; lace, foil, ribbon, lightweight fabric and floral foam. Using a low temp gun with foam is extremely important. A high temp gun could melt the foam back from your touch points you are trying to glue together causing issues with your bond.

This is why we recommend a low temp gun with foam- so you have better bonding. We love our LT-160 Essentials Low Temp Glue Gun for lighter , smaller projects to keep your delicate material intact while you bond it together. Anytime you complete a project with delicate material it’s important to make sure nothing is damaged during the glue process which a low temp gun can help prevent.

How to Use a Glue GunA high temp gun will provide a strong but tougher bond for heavier material such as; metal, wood, plastics, ceramics, magnets and all non porous material. For these types of material you want to make sure that you have the appropriate glue gun for the job.

Our Surebonder H-270 Essentials High Temp Glue Gun is a great option for bonding heavier materials and gives you the strength from our glue sticks that you need for your project to last for years to come.

How to Use a Glue Gun

If you are not sure what temperature you need you can also go with a Dual Temp Glue Gun that gives you the option.

Now that we have established what to look for as far as temperature, let’s look at additional features that may make a difference when working on projects. One of the problems that can occur is trying to get the glue gun to sit safely when you set it down. Our Plus series solves this issue with our redesigned body that allows you to set the glue gun down on its side or right side up without the glue back feeding.

How to Use a Glue Gun

If you are one of those who after you leave the house starts to wonder if you left anything on we even have a solution for that! Our Ultra Series has an Auto Shut- Off so after 30 minutes of non-use, the gun will automatically shut-off. The timer is set in the trigger so each time you squeeze the trigger the timer resets. A great option in our Plus Series is our cordless glue gun. This allows you to work and have freedom from the constant concern of where the cord is and making sure it is not in the way of your project.

If crafts are not your thing but you are looking for something heavier but still lighter than an industrial duty hot glue gun, you want something a little lighter duty than a industrial glue gun that would be perfect for woodworking, packaging and larger DIY projects,Our Professional Series is the way to go. These hot glue guns will help you and become your favorite as you branch out onto more difficult projects.

How to Use a Glue Gun

Lastly, take the wattage of your glue gun into consideration. You will find there are various levels and for one purpose- heat recoup time. Bring the time you will spend gluing into the equation. The best way to explain this is the equation of “wattage = glue time”. If you are trying to use a 40 watt glue gun for a large project that requires a lot of hot glue, you will run into a few issues.

Once you start working, you will notice that the heat recoup time after you output hot glue will be lengthy. Some may continuously squeeze the trigger because nothing is happening. That is because the gun is working to heat up the glue again and cannot keep up with your pace. Sound familiar?

What you really would need for your larger project is a higher wattage glue gun that will keep up with the amount of glue you need at the pace at which you need it. This is one of crafters lifelong struggles. Not to mention we go an even step further with a 5ft roll of glue!

For smaller projects, a low temp gun is perfect. Our Surebonder Cool Shot Glue Gun which is designed to melt at a lower temperature making it a safer way to glue.

Remember, when choosing the right glue gun that Surebonder has everything you need for all of your crafts and projects. We love to see our customers creations! Don’t forget to find us on social media and share your photos with us!

Leave a comment

Comments will be approved before showing up.

  1. How to Remove Keratin Glue
  2. How to Use a Volumizing Finger Diffuser
  3. How to Make Bangs With Glue in Hair Weaves
  4. How to Create Spiral Curls With a Curling Iron
  5. How to Use Velcro Rollers So They Don’t Tangle

Keratin glue is the adhesive that is used to attach hair extensions to natural hair. Keratin glue most commonly comes in a small tube or pre-applied to the top of the hair extension. It is also available in a solid stick form, much like a glue stick for a hot glue gun. The stick form of keratin glue is used to apply the glue tip to the hair extension prior to attaching it to the natural hair.

Applying Glue to the Hair Extension

Lay the hair out on a flat surface and gather a 1/4-inch diameter clump in your fingers. Use scissors to cut the hair off of the top fabric. If the hair extensions come in a loose form, then simply gather a 1/4-inch size clump and separate it from the remaining hair.

Trim the top of the hair, using scissors to create a flat top.

Insert a keratin glue stick into the back hole of the keratin glue gun and push it down as far as it will go. Plug the glue gun cord into an electrical outlet and allow the gun to preheat for two to three minutes. You should also plug in the hair extension iron to preheat.

Pick up the clump of hair in one hand and the keratin glue gun in the other hand. Squeeze the trigger on the glue gun to dispense approximately 1/4 tsp. of keratin glue onto the very end of the hair. Use the tip of the glue gun to work the glue all the way around the top 1/4 inch of hair.

Set down the glue gun and pick up the hair extension iron. Squeeze the glued tip of the hair extension between the iron to flatten it and disperse the glue evenly.

Allow the tip to cool and then cut any uneven hairs at the top using scissors.

Applying the Hair Extension

Lift up the top part of your hair around the crown and secure it with a clip so that it is out of your way. You only need to secure the uppermost layer of hair which will hang on top of the hair extensions to hide them.

Gather a clump of natural hair that is approximately 1/4 inch in diameter. Rotate the hair one or two times near the scalp. Insert a hair shield around the clump of natural hair and push it as close to the scalp as possible.

Place the glued tip of the hair extension under of the clump of hair and position it so that it is approximately 1/4 inch away from the scalp.

Place the hair extension iron around both the natural hair and the hair extension and press down for two to three seconds to bond the extension to the natural hair. Set the iron aside.

Twist the bonded area in between your fingers to smooth out the glue.

How to Use a Glue Gun

The Problem

Glue is an adhesive and adhesives have a tendency to stick to things really well. Sometimes this sticking happens in places we don’t want it to happen, and therein lies the problem of trying to remove something that’s designed to not be removed. But just like any kid who has ever stuck their fingers together with superglue, you know that there’s always a way out!

Today, we’ll look at ways to remove hot glue from different surfaces.

Fabric

There’s a lot that can go wrong if you don’t handle a glue spill on fabric properly, but once you do, it’s actually quite a simple problem to solve. If glue ever happens to drip onto your fabric, DO NOT touch the glue or try to wipe or smear it because it will push into the microscopic crevices of the fabric and it’ll be almost impossible to take out.

Once the glue has set, simply put the fabric in the freezer for a good amount of time, enough to freeze the glue completely. After that’s done, take it out and use a spoon to scrape it off the fabric. Be careful not to scrape too hard as it could damage your fabric and cause a bad tear. The glue should pop off pretty easily if it was frozen properly.

You can simply use acetone at your own risk since acetone is an incredible adhesive remover, but it might mess up your fabric pretty bad. And it’s only typically used on fabric as a last resort or if you’re only trying to remove it off of a spare wiping cloth or something similar.

Metal, Glass, Plastic, and Wood

One of the most common places you’ll see droplets of glue is on tables. And unless you’re a coroner, your table is probably made out of plastic, wood or glass. But in case you do happen to own something made of metal that fell victim to a drop of glue, this method of removing the adhesive should work just fine on any surface.

  • Allow the glue to cool and dry completely.
  • Take a cotton swab and apply some rubbing alcohol or acetone onto it and start rubbing at the edge of the dollop of glue.
  • Give it a few moments and eventually, the glue should peel off just as easily.

Just like with fabric, acetone, and in this case, the rubbing alcohol may not mesh well with your work surface, particularly the wood. A lot of wooden surfaces are treated and varnished, so keep this in mind before deciding to use this method as it may ruin the surface even a tiny bit.

Skin

This is the one thing that you don’t want to happen because hot glue can seriously hurt. But if you’re unfortunate enough to experience it, don’t wait for the glue to dry this time! Immediately run the affected area under some running water to cool it down and try to wash it away while it still hasn’t fully adhered.

If the glue has already dried up and adhered to your skin, be careful with peeling it off because it might take a piece of your skin with it if you do it haphazardly. Do not try to use acetone or alcohol in this situation because your skin may be suffering from mild burning from the glue and it will hurt ten times worse. If the affected area seems to have suffered very serious burning, seek medical help immediately after dousing it with water.

If you were able to peel the glue off without too much incident, remember that your skin is still under duress. Rub the affected spot again with water and then apply some antibiotic cream and cover it up with a bandage if necessary.

Mistakes happen in the workshop almost always, but knowing what to do in situations like these can help prevent more damage.

One mistake you don’t want to make is choosing a bad glue gun. So make sure to use only the best glue gun available in the market! Check out Chandler Tool Glue Guns to know more!

Learn some amazing at home craft ideas

Today we bring you some tips on how to use a glue gun. This way you can incorporate it into your crafts and discover a world of creations to which you apply.
It is an adhesive that adheres to most materials in a very quick, secure and permanent way. We encourage you to learn how to use!

Materials

  • Gun
  • Silicone glue stick

Step by step

The first thing to do is plug in your glue gun to an electrical outlet. We must ensure we do it in a safe place, away from flammable objects which can stain rugs, tables or tissues.

Once gun is plugged you must insert a silicone or adhesive on the back of it. If there is one already inserted, have a second one in reserve in case the first one runs out.

After loading the gun, we have to gather the materials that we will stick. Silicone works exceptionally well the heavy fabrics, dried flowers, Styrofoam, wood and plastics. For paper, textiles or ceramics it should work fine, however with care and moderation as it tends to leave heavy residues in these cases are not conceal.

Before pulling the trigger, it is important to ensure that the glue has melted. For this we let out a little silicone squeezing the trigger on a piece of paper or fabric, glue should come off easily from the gun. If not, it’s probably not hot enough so you have to wait a little longer.

When you have made sure the glue is liquid, put the silicone glue on drawing lines of the object. Next you need to immediately place the other object to make it stick and press firmly holding the pieces together for about 15 seconds.

When you remove your hand the two pieces will probably be joined together, but if it do not, you can achieve this by putting a little more pressure to adhere.

Once the glue has dried you can use a file to remove the excess glue on the craft that you have worked on to be displayed or decorated.

Tips & Warnings

  • It is vital not to touch the hot glue because it can cause deep burns. Touch it using a cloth or tissue.
  • Also, once you finish using the gun, let it cool down and make sure that it is cool before storing to avoid problems.

Over time will take on ease of handling of this tool and see how simple it is and yet how useful it becomes in the world of crafts. The bottom line is creating things with our own hands will mean this tool will undoubtedly become a very helpful and useful once you know how to use it.

Dare to experiment with the glue gun and then tell us how went!

Choosing The Right Glue Gun and Stick by Size

We often get questions from customers about the differences between the glue stick sizes accepted by glue guns and how to make sure the glue stick you’re purchasing will work with your glue gun. To help make the shopping process less confusing, we have put together this guide to break it down.

5/16″ Mini Hot Glue Guns

​This is a typical craft store glue gun size. It uses a 5/16″ X 4″ mini glue stick. With ‘mini’ glue sticks, options are usually limited to low quality (weak bonding) adhesives and other very specialized products like funky colors or glow in the dark. We recommend spending a little more for a 1/2″ glue gun. With a 1/2″ glue gun you’ll get way more adhesive options, a gun that will likely perform a lot better and last a lot longer. For a low-cost glue gun that works significantly better than a craft store glue gun, we recommend the Infinity Bond Mojo, which uses 1/2″ glue sticks. If you want to stick with your existing 5/16″ glue gun, our Infinity Melt Little Joe glue sticks will work.

​1/2″ (12mm) Glue Guns​

This is the most common size glue gun and gives you the most glue stick options. It is a great glue gun size for applications ranging from crafting to light industrial and packaging applications. 1/2″ glue guns are a great option for most applications, providing the most adhesive options as well as the most competitively priced glue sticks.

There is a wide range of glue guns to choose from if you’re looking for a 1/2″ glue gun. For light industrial use, the Infinity Bond Scout is perfect. It has a powerful 200-Watt heater while still having a lightweight design to keep it portable and easy to use. For more industrial purposes, the Ranger Pro will be able to keep up with your demands. It has a 330-Watt heater and temperature adjustment between 265 and 445 degrees Fahrenheit.

​5/8″ (15mm) Glue Guns

​Similar to the 1/2″ glue guns, the 5/8″ size gives you higher output for more demanding applications and still offers a lot of glue stick options. The ⅝” glue sticks are also larger so you get more adhesive dispensed with each trigger pull and have to ‘reload’ the glue gun less often. ⅝” glue guns are a great option for people who need a little more output than a standard ½” gun offers or for those who just want to reload their gun less often.

The Infinity Bond Brute is a powerful and heavy-duty glue gun to keep up with your industrial demands. It has an incredible 500-Watt heater, adjustable temperature control and weighs just over 1.5 pounds, so you can use it all day.

1.75” (43mm) Glue Guns

There are only a couple of manufacturers who make glue guns in this size but they are a darling of industrial users everywhere. The large 1.75” X 1.75” glue slugs that these guns use make them great options for high volume and industrial applications. These guns are available in all-electric and pneumatic versions. That means they can be used as a traditional glue gun with just a cord or connected to an air compressor for effortless dispensing.

These are also some of the only glue guns that offer sprayable versions that can dispense long open time glue slugs in spray form. The downside of these guns is that they are typically pretty expensive and are a little bulkier than smaller stick sized guns. One of our popular pneumatic spray guns is the Power Adhesives TEC 6300 which is made for industrial projects that require a large surface area to be covered. It can dispense 10 pounds of glue per hour and the is low fatigue even with extended use.

If you have an industrial application or just want a gun that is going to hold up in the long run, this is a great glue gun size. They also offer a lot of options (like spray) that no other glue gun can match. One of the lowest cost options for a glue gun using 1 3/4″ glue gun is the Power Adhesives TEC 3400. It’s able to dispense 8.5 pounds of glue per hour, without pneumatic assistance.

​3M TC ⅝” X 2” Glue Guns

​The 3M Polygun LT Glue Gun is a 3M only size glue gun that takes 5/8″ X 2″ glue sticks and is fed by the user’s thumb, not a trigger. It is a popular gun and there are a lot of manufacturers who now make sticks in this size so there are quite a few adhesive options. If the lack of trigger is an issue, this may not be the best glue gun for you.

3M TC ⅝” X 8” Quadrack Glue Guns

The 3M TC glue guns with Quadrack converter are similar to the standard 3M TC glue guns above but include a trigger mechanism and take a ⅝” X 8” ‘Quadrack’ glue stick made by 3M. It offers a good output and durable design.

3M PG 1” X 3” Glue Guns

The 3M PG II and PG II LT are pneumatic glue guns (LT is the low temp version) that have been around forever. These glue guns are industrial powerhouses and great for high volume applications or if you want to mount a glue gun and attach accessories like a foot pedal. They are the only manufacturer who makes guns in this size but a number of people now make adhesives in the PG glue stick size. This means there are a lot of adhesive options and they are reasonably priced. It’s great for high volume industrial use but probably overkill for the average user.

Questions? We Are Here to Help

With all of the different size glue sticks and glue guns, you want to be sure you are purchasing the correct sizes so they are compatible. If you have questions about which glue sticks will work with your glue gun or if you want to consult an expert about a complete setup, contact us. One of our knowledgable team members will be happy to assist you.

How to Use a Glue Gun

How to Use a Glue Gun

You really can’t as in a glue gun the heat works on the the stick at the point. Crayons will melt before that point. It doesn’t take a lot to melt them. Can i ask why you need to do this? Maybe there are other solutions if we knew more

How to Use a Glue Gun

Crayons have a different melting point than glue, which is much lower than glue.

To use glue guns properly, use only glue in them as a safety measure, crayons in them may cause a whole another problem for you.

How to Use a Glue Gun

Kim. Is it a glue gun you don’t care about and you are just trying something new? I agree that is won’t work but do you know someone that has something similar and you think it might be a glue gun? Sorry!

I wouldn’t recommend doing this, you’ll ruin your glue gun and the crayon will run right out.

Have you seen the pumpkin project on here? They use a blow dryer, the crayon just melts and drips down the side of pumpkin.