Categories
Life hack

How to use headphones with your tv

How to use headphones with your tv

  • Tweet
  • Share
  • Email

Thanks to the growing popularity of modern HDTVs with built-in Bluetooth radios, watching your favorite shows and movies using headphones powered by wireless Bluetooth has become easier than ever.

This information applies to televisions from a variety of manufacturers including but not limited to those made by LG, Samsung, Panasonic, Sony, and Vizio.

Choose and Connect a Bluetooth Transceiver

How to use headphones with your tv

There are many Bluetooth transceivers (combination of transmitter and receiver) and transmitters on the market, but only those with the right hardware will support a superior TV experience. The key is to choose ones that feature Bluetooth aptX with Low Latency (not just Bluetooth aptX) so that the audio will remain synchronized with the video. Otherwise, there will be a delay between what you see and hear.

If your Bluetooth headphones don’t support Low Latency — or if you intend to upgrade your wired headphones with Bluetooth — then you’ll need to pick up a pair of these Bluetooth transceivers. Set one to transmit mode and connect it to the TV/receiver audio output. Set the other to receive mode and plug it into the 3.5 mm jack on your headphones.

After you’ve installed the Bluetooth adapters you need, follow the instructions to set them up with your headphones.

How to Connect Headphones to Any TV Via Bluetooth

Resolve Bluetooth Audio/Video Sync

One legitimate concern about using Bluetooth wireless headphones with video content is the potential for delayed audio. You’ll recognize it when you hear everything a split second after it happens on the screen. If you have a more modern television, you can check for a built-in fix. Look for an “audio delay/sync” setting (or something similarly named) under the sound options in the TV’s system menu. If present, the adjustment should be shown as either a slider or a box with values typically set in milliseconds. Sometimes you might see a list of all the separate inputs/outputs that can be adjusted. Bringing that slider/number down should help minimize the delay so that the audio syncs with the video.

In rare instances, you’ll experience video instead of audio delay. This phenomenon occurs when you’re streaming high-definition content where the extra moment it takes for the video to appear (sometimes due to buffering) on the screen causes it to lag behind the sound. In this case, adjust the sound settings to increase the audio delay, slowing it down in order for it to sync up with the video. Make small adjustments and test until you find the perfect match.

For best results, make sure that your smart television has been updated with the latest firmware because outdated firmware affects performance. If you are still encountering audio/video sync problems, check to see if any of your TV’s sound settings are not currently set to “standard.” Enabling various sound modes (e.g. virtual, 3D audio, surround, PCM, etc.) can unintentionally inject a delay. If you’re streaming video through an app or separate device (e.g. YouTube, Netflix, Amazon Fire TV, Apple TV, Microsoft Xbox, Sony PS4, Blu-ray player, stereo receiver/amplifier), double-check the physical connections as well as the audio settings on each.

Older electronics may lack these audio adjustment settings. Your best bet for keeping the audio synced with video is by choosing hardware that supports Bluetooth Low Latency.

Low Latency is Key

Look for Bluetooth aptX with Low Latency — this standard must be on both the headphones and the transmitter in order to work. Low-latency Bluetooth incurs a delay no greater than 40 milliseconds, which creates suitable synchronization between what is seen and heard. For reference, typical Bluetooth wireless headphones exhibit audio delays ranging from 80 ms up to 250 ms. Even at 80 ms, human brains perceive audio delayed behind video.

To browse Bluetooth aptX-compatible products, visit the aptX website. Although the lists are updated frequently, they won’t necessarily show everything that is on the market.

Use one of these methods to connect headphones to your TV and enjoy listening at full volume without disturbing others.

So you want to watch television at night without disturbing others trying to sleep. Or maybe you prefer to block out the noise of your surroundings — like that annoying dog next door who won’t stop barking — while catching up on The Flash.

Connecting wireless headphones to your television doesn’t have to be difficult, and there are several ways you can pull it off, regardless of what TV you have.

Dedicated wireless headphones

If you’re like most people, your TV doesn’t have built-in Bluetooth. But the workaround for connecting wireless headphones is so simple and cheap, it’s not a huge problem.

How to use headphones with your tvSarah Tew/CNET

One the most straightforward ways to use wireless headphones with your TV is to purchase dedicated wireless headphones. These typically come with a base station that plugs into the television via 3.5mm analog jack or optical and work over radio frequency instead of Bluetooth, which comes with one main advantage: range. Bluetooth headphones are typically limited to 30 feet, give or take. RF headphones often have a far superior range — closer to 300 feet when unobstructed.

There is a catch, however. If you do not have another audio device connected to your television through that jack, such as a sound bar, you’ll have to swap it for the headphones when you want to go wireless.

But if your sound bar is connected through either optical or digital outputs, you can leave the wireless headphones connected without interfering with normal audio playback.

You can find wireless headphones for your television for anywhere from $20 to upwards of $300 and the audio quality will vary substantially.

Bluetooth headphones

A dedicated set of headphones for your TV might have its advantages, but if you already have a nice pair of headphones you’d prefer to use, you might be able to make it work with things you already own or for even less.

If your headphones are Bluetooth, all you really need is a Bluetooth transmitter. Transmitters can be found online or at your local electronics retailers for as little as $15.

Basically, it takes the 3.5mm or RCA output from your television and transmits it as a Bluetooth signal. You will need a power source — usually USB — which you might be able to tap from the USB port on the television or plug into a power strip around your entertainment system. Once you pair the transmitter with your Bluetooth headphones, setup is complete and you can begin watching shows or movies with the audio streaming through your favorite headphones.

Using a Bluetooth transmitter will leave you with the same issue as a pair of dedicated wireless headphones, though. If you’re not using another 3.5mm output device, like a sound bar, you may have to disconnect the Bluetooth transmitter from the 3.5mm or RCA jacks to restore volume to the television’s internal speakers.

Media Streamers

Some set-top boxes — such as Roku, Apple TV and Android TV boxes — allow you to connect headphones and listen to your movies and TV shows in private. This is often one of the most hassle-free ways to connect headphones to your television.

Android TV

Support for Bluetooth audio devices on Android TV boxes is hit or miss. Some support Bluetooth, but only for use with a keyboard and mouse. Others, do support Bluetooth headphones, and you pair them just as you would with any other Android device. Put the headphones into pairing mode, go to Settings > Bluetooth and select the headphones when they appear.

The Nvidia Shield Controller also has a headphone jack built-in, so you can use wired headphones with the controller if you don’t have Bluetooth headphones on hand.

Apple TV

Apple TV will allow you to connect Bluetooth headphones. Just put the headphones into pairing mode and go to Settings > Remotes and Devices > Bluetooth. Wait for the headphones to appear and select them to pair and connect.

Amazon Fire TV

You can pair Bluetooth headphones with the Amazon Fire TV and Fire TV Stick. Just put your Bluetooth headphones in pairing mode and on the Fire TV or Fire TV Stick, go to Settings > Controllers and Bluetooth Devices > Other Bluetooth Devices. Once your headphones appear under Discovered Devices, select them to complete pairing.

Roku

Depending on which model Roku and Roku remote you have, you can either use private listening through the Roku app or plug wired headphones into the jack on the remote.

To use private listening with the Roku app, download the Roku app to your Android or iOS device and make sure your phone is connected to the same wireless network as your Roku. Open the app and connect either wired or Bluetooth headphones to your phone and private listening will be enabled. Disconnect the headphones to disable private listening.

The Roku 3 ($109 at Walmart) , Roku Premiere+, Roku 4 and Roku Ultra all come with remotes that feature headphones jacks.

Gaming consoles

If you have a gaming console plugged into your television, you can use it for wireless audio. But there’s a catch. Bluetooth support is spotty and you’ll need wired headphones.

PlayStation 4

The PlayStation 4 will only supports specific Bluetooth headsets. There is also a workaround which requires a USB Bluetooth adapter that circumvents the restriction, but it still doesn’t work with all Bluetooth headsets and headphones.

Your best bet is using wired headphones and plugging them into the 3.5mm headphone jack on the controller. Just make sure to select the proper audio device in settings, under Settings > Devices > Audio Devices > Output to headphones.

Xbox One

The Xbox One does not support Bluetooth, so your hopes of a truly wireless experience are dead. But, like with the PlayStation 4, you can plug your headphones into the 3.5mm jack on the controller.

Unfortunately, not all Xbox One controllers are created equal. Newer models have the 3.5mm jack built-in. With an older wireless controller, you will need to purchase the Stereo Headset Adapter, which plugs into the bottom of the controller and gives it a 3.5mm jack and volume and microphone controls.

  • Articles (35)
  • Blogs (45)
  • News (2)
  • Research (0)
  • Stories (0)

How to use headphones with your tv

Hearing audio through TV speaker AND headphones at the same time

For most TVs, the built-in speaker automatically mutes when you plug anything into its audio output port (AUX, RCA, Optical, etc.)
Some TVs however, may give you the option to play audio through both the TV’s internal speakers AND an external audio device simultaneously.


This is a TV Feature – Some TVs have it, some don’t; even TVs under the same brand can have different results for this matter.

Getting audio from both your TV speakers and headphones simultaneously may be a bit challenging, but we’ll cover your options here.

Please try to change your TV settings or contact your TV manufacturer for more details.

Here is an example of how to change this setting for the LG 55″ LA6500. How to change audio settings on LG TV


If this doesn’t work, here are a few other possible options:

Option 1: If you have a TV box (Roku, Xfinity, etc.) or an AV Receiver connected to your TV, try to connect the Avantree transmitter directly to them instead of the TV. This method essentially allows you to “go around ” the TV’s built-in speakers.

Option 2: Use an audio splitter / optical splitter to connect to the Avantree transmitter AND an external speaker (for instance, a sound bar) at the same time.

1) For AUX Output

2) Use an audio splitter (e.g. Avantree TR302 ) to share the TV’s audio between an EXTERNAL SPEAKER and the Transmitter. The splitter in this example is a 3.5mm audio splitter.

3) For Optical AUDIO OUT

4) Use an optical splitter (e.g. J-Tech splitter ) to share the TV’s audio between an EXTERNAL SPEAKER and the Transmitter. The splitter in this example is a optical audio splitter.

Option 3: Return your current prodcut and consider purchasing an Oasis Plus or a HT5009 or a HT5006 .

Our industry leading “Bypass” function allows you to put the Oasis Plus transmitter between a TV AND an external speaker, and have audio come out from both devices AT THE SAME TIME.

by Brain Start · October 21, 2018

How to connect headphones to the HISENSE TV LED H43A6550

You want to watch your TV, but the neighbor is mowing his lawn beneath your windows, and even if you raise the sound, you hear nothing! Are the children finally taking their nap? It is then unthinkable to wake them up with the noise of the television like your HISENSE TV LED H43A6550… In this case there is a solution: plug a headphone to your HISENSE TV LED H43A6550 TV! This is the perfect way to hear your favorite program, while not disturbing anyone.

Two headphones are possible: the headphone with wire, and the wireless headphone using bluetooth technology.

In this article we will help you plug an audio headset into your HISENSE TV LED H43A6550 TV

Wired Headset from HISENSE TV LED H43A6550

Do you have a headset with a long enough wire to make the distance between you and your TV? Then we can help you plug it in! There are two scenarios: your TV HISENSE TV LED H43A6550 has a jack output on it or it has only RCA outputs.

Your TV has a jack output on HISENSE TV LED H43A6550

If you are in this case, the manipulation will be very simple and fast: connect your headphones to the jack output of your television.

There you go ! Sometimes, some TVs may need to be switched to a “headphone” mode.

To do so, take the TV remote control, go to “Menu”, then “Settings”, and “Sound settings”. Finally, select the “sound in headphones” or “headphones” mode from your HISENSE TV LED H43A6550.

Your HISENSE TV LED H43A6550 TV has only RCA outputs

If you are in this case, do not panic! You need three things: RCA cables, a double female RCA splitter with jack output, and your headphones.

A double female RCA splitter with jack output is a small object on which, on one side, you can plug in your headphones with its jack, and on the other side, you can plug in the two male RCA plugs.

Be careful when connecting : connect the white plug with the white output, and the red plug with the red output. Now, start your show, the sound comes out of the headphones connected to your HISENSE TV LED H43A6550!

Wireless Headset with HISENSE TV LED H43A6550

The wireless headset is a technology adopted by many families.

First because it is a more practical headset than the headset with a wire connected to your HISENSE TV LED H43A6550.

Find all the information about HISENSE TV LED H43A6550 in our articles.

Then because it allows several options like listening to the TV only in the headphones or allowing the sound to be also broadcast on the speakers when watching a movie together but one hears less well than the others.

Sound only in headphones with your HISENSE TV LED H43A6550

For that, it’s quite simple, just connect the headphone output of your television to the charging base of your wireless headset.

The sound from your HISENSE TV LED H43A6550 will only pass through the base and therefore through the headphones.

Sound on speakers and headphones

To do this, use the optical output of your HISENSE TV LED H43A6550 TV.

It is not just a question of plugging in a cable, you must first have a digital analogue converter.

It is easily found on the Internet.

Then, connect it to the optical output from your HISENSE TV LED H43A6550.

And connect your wireless headset base to the digital analogue converter! So, everybody takes advantage of the sound, each one to its preferred volume via HISENSE TV LED H43A6550!

More about? Our team of experts and passionate could help you, feel free to contact us.

You don’t need to share your TV’s audio with everyone around you. These are the easiest ways to connect your headphones to your television.

How to use headphones with your tv

When you’re watching TV with friends, your TV’s speakers (or better yet, a soundbar) let everyone hear what’s going on. When you’re watching TV on your own, you don’t need to share that audio with everyone around you. In fact, you probably don’t want to disturb your significant other, roommates, kids, or neighbors if you’re the only one watching TV late at night. You can mute the speakers and rely on closed captions if you really want to be silent, but we have a better solution: Use headphones.

Headphones let you listen to anything you want without bothering anyone around you. You probably use them mostly for listening to music or podcasts, or even watching videos on your phone or computer, but they aren’t limited to mobile devices or PCs. There are several ways to connect your headphones to your TV to enjoy the combined benefits of private audio and a big screen. Here are the ways you can use your favorite headphones or earphones with your TV.

Direct Wired Connection

How to use headphones with your tv

This is the most direct and obvious way to use your headphones with your TV. It’s also the least convenient. If your TV has a 3.5mm headphone jack, just plug your wired headphones into it. If your TV doesn’t have a 3.5mm jack, but has RCA stereo outputs, get an RCA-to-3.5mm adapter and use your headphones that way.

The obvious problem here is that you need a really long wire to listen a comfortable distance away from your TV. And even if you have that wire, you’re then physically tethered to your TV. You have to be careful not to pull the cable or trip over it, and it just isn’t very pleasant to work with. We don’t really recommend this method unless your TV is a small screen right near you, and even then it probably isn’t the best way to do it.

Amazon Fire TV: Bluetooth

How to use headphones with your tv

If you have an Amazon Fire TV media streamer, or a TV that uses Amazon’s Fire TV platform like the Toshiba Fire TV Edition, you have a wireless option built in: Bluetooth. Fire TV can connect directly to Bluetooth devices like game controllers, keyboards, and headphones. This means you can simply pair your favorite Bluetooth headphones (or a dedicated second pair, if you want to keep some TV-only headphones nearby) with your Fire TV device just like it’s a smartphone.

From the home screen, go into the Settings menu and select Controllers & Bluetooth Devices. Choose Other Devices, then Add New Device. Put your Bluetooth headphones into pairing mode and select them when they appear on the screen. Your Fire TV will now stream audio to your headphones when they’re connected.

Android TV: Bluetooth

How to use headphones with your tv

Just like with Fire TV (which itself is based on Android), Android TV devices can pair with Bluetooth devices. This means you can use your Bluetooth headphones with any Android TV-powered Sony TV or Nvidia Shield TV media streamer. The process is very similar to pairing Bluetooth headphones to a Fire TV device.

From the home screen, go into the Settings menu and select Remote & Accessories. Choose Add Accessory and put your Bluetooth headphones into pairing mode. Select the headphones in the menu when they appear. Your headphones are now paired with your Android TV device.

Roku TV: Smartphone App

How to use headphones with your tv

Roku media streamers and Roku TVs like the TCL 6-Series and Element Roku TV don’t have Bluetooth, but they still let you listen wirelessly to whatever you’re watching. Roku’s answer is called Private Listening, a feature that streams audio to a connected smartphone or tablet through the Roku app.

Install the Roku app (available on Android and iOS) to your mobile device and set it up to work with your Roku streamer or TV. Once the app is connected, plug headphones into your phone to automatically cut out audio going to the TV and send it directly out through your phone’s headphone jack.

Some Roku devices, like the Roku Ultra and certain high-end Roku TV models, don’t even need the Roku app to work. If your Roku remote has a headphone jack on the side, it can offer Private Listening without your smartphone. Just plug your headphones (or the earphones included with the Roku Ultra) into the jack and listen to whatever you’re watching, privately.

Bluetooth Transmitter

How to use headphones with your tv

If your TV or media streamer doesn’t support Bluetooth or audio streaming through an app, you need to get some form of transmitter for wireless listening. Bluetooth transmitters are inexpensive (generally around $20 to $50) devices you plug into the back of your TV to wirelessly stream audio to a nearby paired Bluetooth audio device.

There are many, many Bluetooth transmitters available on Amazon, but not all are suitable for TVs. Cheaper transmitters only connect through 3.5mm jacks, which are present on some TVs but aren’t the best connection available. Look for a transmitter with an optical audio ( TOSLink or SPDIF) input; optical outputs are the most common audio outputs on TVs, and provide excellent, stable audio quality thanks to their digital connection.

While we haven’t yet tested them, the Even TV2 from Even Headphones seems to be a full-featured transmitter from a credible headphone company (the makers of the Even E1 earphones), while the 1Mii Bluetooth Transmitter is one of the most well-reviewed devices of its category on Amazon (though we can’t attest to 1Mii’s credibility as a brand).

Wireless Gaming Headset

How to use headphones with your tv

If you don’t already have preferred headphones to use when watching TV, or don’t want to deal with Bluetooth pairing, you can always get an all-in-one solution in the form of wireless headphones and gaming headsets. You just need to make sure they aren’t Bluetooth headphones.

The vast majority of “wireless headphones” are Bluetooth, and that’s fine for most users. If you want to get headphones specifically for use with a TV, though, you want a non-Bluetooth set with a dedicated transmitter. Some specialty and high-end headphones are available in that realm, but you’ll have a much easier time searching for a wireless gaming headset that suits your needs.

Find wireless gaming headphones that support an optical audio input, and you’re ready to listen to TV as soon as you charge them and plug the transmitter in. We recommend the Astro Gaming A20, a $150 wireless headset that’s comfortable and offers very good sound quality. If you can really splurge, though, the $330 Steelseries Arctis Pro Wireless sounds and feels even better, and features some very convenient extras, like two swappable batteries and Bluetooth connectivity on top of the transmitter.

Of course, you won’t be listening to your TV with headphones on all the time. So put the headphones down and check out our guide on how to set up your speakers to get the best sound for your home theater experience.

Bluetooth adapters for TVs are easy to set up

How to use headphones with your tv

  • Twitter
  • LinkedIn

How to use headphones with your tv

  • Tweet
  • Share
  • Email

What to Know

  • Important first step: Make sure your TV can support Bluetooth. Otherwise, look for a 3.5mm AUX, RCA, or optical audio output.
  • Get a Bluetooth transmitter, connect it to a power source, and then pair your Bluetooth headphones or speakers.

This article explains how to add Bluetooth to most TV models. Instructions apply to most modern televisions.

Take Inventory of Your TV

Before you get too deep into this process, you’ll want to know what options your TV can support. The first thing to do is check to see whether your TV already has Bluetooth built-in. Some TVs have this, and if yours does, you may not need fancy adapters.

How to use headphones with your tv

If you have a Bluetooth-enabled TV and are connecting to speakers or headphones that don’t use Bluetooth, you can use a Bluetooth receiver like this Harmon Kardon Bluetooth adapter. If you’re ready with Bluetooth-enabled devices, you can jump straight into connecting to your TV using Bluetooth.

The other important thing to note is the various audio output options your TV supports. If it doesn’t have built-in Bluetooth, you’ll likely be relying on a 3.5mm AUX, RCA, or optical audio output. You’ll need to confirm which ports are available to you when picking an audio solution so you get one that’ll work with your TV.

Using a Bluetooth Transmitter for TV

If you’ve settled on adding a Bluetooth transmitter to your TV to handle wireless audio from your TV to a pair of headphones or speakers, the basics are fairly simple.

You’ll want to start by getting a Bluetooth transmitter that’ll work with your TV. Something like Avantree’s Audikast is a versatile option, as it can transmit to two devices simultaneously, supports low latency audio, and can take audio inputs from USB, optical, RCA, and 3.5mm AUX outputs on your TV or computer monitor.

How to use headphones with your tv

You can also find simpler and cheaper transmitters that use 3.5mm jacks, like Trond’s transmitter or check out our list of Best Bluetooth Audio Receivers.

In most cases, you’ll need to connect the transmitter to a power source unless it has its own battery. Then you’ll have to connect it to one of your TV’s audio outputs.

To pair Bluetooth headphones or speakers, you’ll want to put them close to the transmitter and set each device to pairing mode. Activating pairing mode will be different for each device, so be sure to check the specific instructions included with your transmitter, speaker, or headphones.

Once paired, you’re ready to listen.

You may need to unplug the adapter to resume using your TV’s built-in speakers, though this depends on your TV and which audio port you use.

It really is that simple to set up, but getting a good experience out of a Bluetooth adapter for your TV can be more complicated. Lifewire has reviewed a number of adapters that may help you get a higher quality, latency-free experience.

Possible Issues and Alternatives

Bluetooth has its faults and limitations. It may seem like an attractive option to setup wireless speakers for TV, but it’s not perfect, and other solutions may provide a much better experience:

  • Audio Sync: Many Bluetooth TV adapters will support a limited number of devices at a time. Some support two pairs of headphones, so you and someone else can listen at the same time. While you could use this feature to try setting up two Bluetooth speakers, you may run into issues with the audio being out of sync, and you may not get a proper stereo sound unless the speakers are designed to work together specifically for that purpose.
  • Audio Quality: Audio quality over Bluetooth is generally not as good as other solutions, like wired connections or other wireless audio types. How much quality is lost depends on the Bluetooth codecs supported both on the transmitting and receiving ends.
  • Latency: Depending on the devices you use, there could be significant latency, meaning the audio you hear may lag behind the imagery on TV.
  • Wiring: If you’re thinking of using Bluetooth because you want to avoid lots of wires, it’s also worth noting you’ll likely be wiring a Bluetooth transmitter from the back of your TV to somewhere around it where its signal isn’t blocked by the TV. In other words, you’ll still be dealing with wires.

With all that in mind, you may consider something like a soundbar to upgrade your audio setup while also supporting a completely wireless surround sound setup with a seamless connection to remote TV speakers. Or, you have the option of using a device like a Roku streaming player, many of which support wireless audio when a pair of headphones is plugged into the remote control.

You don’t need to share your TV’s audio with everyone around you. These are the easiest ways to connect your headphones to your television.

How to use headphones with your tv

When you’re watching TV with friends, your TV’s speakers (or better yet, a soundbar) let everyone hear what’s going on. When you’re watching TV on your own, you don’t need to share that audio with everyone around you. In fact, you probably don’t want to disturb your significant other, roommates, kids, or neighbors if you’re the only one watching TV late at night. You can mute the speakers and rely on closed captions if you really want to be silent, but we have a better solution: Use headphones.

Headphones let you listen to anything you want without bothering anyone around you. You probably use them mostly for listening to music or podcasts, or even watching videos on your phone or computer, but they aren’t limited to mobile devices or PCs. There are several ways to connect your headphones to your TV to enjoy the combined benefits of private audio and a big screen. Here are the ways you can use your favorite headphones or earphones with your TV.

Direct Wired Connection

How to use headphones with your tv

This is the most direct and obvious way to use your headphones with your TV. It’s also the least convenient. If your TV has a 3.5mm headphone jack, just plug your wired headphones into it. If your TV doesn’t have a 3.5mm jack, but has RCA stereo outputs, get an RCA-to-3.5mm adapter and use your headphones that way.

The obvious problem here is that you need a really long wire to listen a comfortable distance away from your TV. And even if you have that wire, you’re then physically tethered to your TV. You have to be careful not to pull the cable or trip over it, and it just isn’t very pleasant to work with. We don’t really recommend this method unless your TV is a small screen right near you, and even then it probably isn’t the best way to do it.

Amazon Fire TV: Bluetooth

How to use headphones with your tv

If you have an Amazon Fire TV media streamer, or a TV that uses Amazon’s Fire TV platform like the Toshiba Fire TV Edition, you have a wireless option built in: Bluetooth. Fire TV can connect directly to Bluetooth devices like game controllers, keyboards, and headphones. This means you can simply pair your favorite Bluetooth headphones (or a dedicated second pair, if you want to keep some TV-only headphones nearby) with your Fire TV device just like it’s a smartphone.

From the home screen, go into the Settings menu and select Controllers & Bluetooth Devices. Choose Other Devices, then Add New Device. Put your Bluetooth headphones into pairing mode and select them when they appear on the screen. Your Fire TV will now stream audio to your headphones when they’re connected.

Android TV: Bluetooth

How to use headphones with your tv

Just like with Fire TV (which itself is based on Android), Android TV devices can pair with Bluetooth devices. This means you can use your Bluetooth headphones with any Android TV-powered Sony TV or Nvidia Shield TV media streamer. The process is very similar to pairing Bluetooth headphones to a Fire TV device.

From the home screen, go into the Settings menu and select Remote & Accessories. Choose Add Accessory and put your Bluetooth headphones into pairing mode. Select the headphones in the menu when they appear. Your headphones are now paired with your Android TV device.

Roku TV: Smartphone App

How to use headphones with your tv

Roku media streamers and Roku TVs like the TCL 6-Series and Element Roku TV don’t have Bluetooth, but they still let you listen wirelessly to whatever you’re watching. Roku’s answer is called Private Listening, a feature that streams audio to a connected smartphone or tablet through the Roku app.

Install the Roku app (available on Android and iOS) to your mobile device and set it up to work with your Roku streamer or TV. Once the app is connected, plug headphones into your phone to automatically cut out audio going to the TV and send it directly out through your phone’s headphone jack.

Some Roku devices, like the Roku Ultra and certain high-end Roku TV models, don’t even need the Roku app to work. If your Roku remote has a headphone jack on the side, it can offer Private Listening without your smartphone. Just plug your headphones (or the earphones included with the Roku Ultra) into the jack and listen to whatever you’re watching, privately.

Bluetooth Transmitter

How to use headphones with your tv

If your TV or media streamer doesn’t support Bluetooth or audio streaming through an app, you need to get some form of transmitter for wireless listening. Bluetooth transmitters are inexpensive (generally around $20 to $50) devices you plug into the back of your TV to wirelessly stream audio to a nearby paired Bluetooth audio device.

There are many, many Bluetooth transmitters available on Amazon, but not all are suitable for TVs. Cheaper transmitters only connect through 3.5mm jacks, which are present on some TVs but aren’t the best connection available. Look for a transmitter with an optical audio ( TOSLink or SPDIF) input; optical outputs are the most common audio outputs on TVs, and provide excellent, stable audio quality thanks to their digital connection.

While we haven’t yet tested them, the Even TV2 from Even Headphones seems to be a full-featured transmitter from a credible headphone company (the makers of the Even E1 earphones), while the 1Mii Bluetooth Transmitter is one of the most well-reviewed devices of its category on Amazon (though we can’t attest to 1Mii’s credibility as a brand).

Wireless Gaming Headset

How to use headphones with your tv

If you don’t already have preferred headphones to use when watching TV, or don’t want to deal with Bluetooth pairing, you can always get an all-in-one solution in the form of wireless headphones and gaming headsets. You just need to make sure they aren’t Bluetooth headphones.

The vast majority of “wireless headphones” are Bluetooth, and that’s fine for most users. If you want to get headphones specifically for use with a TV, though, you want a non-Bluetooth set with a dedicated transmitter. Some specialty and high-end headphones are available in that realm, but you’ll have a much easier time searching for a wireless gaming headset that suits your needs.

Find wireless gaming headphones that support an optical audio input, and you’re ready to listen to TV as soon as you charge them and plug the transmitter in. We recommend the Astro Gaming A20, a $150 wireless headset that’s comfortable and offers very good sound quality. If you can really splurge, though, the $330 Steelseries Arctis Pro Wireless sounds and feels even better, and features some very convenient extras, like two swappable batteries and Bluetooth connectivity on top of the transmitter.

Of course, you won’t be listening to your TV with headphones on all the time. So put the headphones down and check out our guide on how to set up your speakers to get the best sound for your home theater experience.

Connect Bluetooth headphones to your Google Chromecast and enjoy a lockdown binge-watch without disturbing others.

How to use headphones with your tv

The Google Chromecast is a great piece of technology with features that can turn almost any display into a smart TV with capabilities of streaming movies, songs and even games via Google Stadia.

That said, the Google Chromecast often takes centre stage in shared rooms such as lounges and the noise it produces can disturb others. Unfortunately, this issue is more relevant than ever because of the ongoing COVID-19 crisis, as many individuals are working from home on different schedules due to lockdown restrictions.

Although there are no built-in options to link wireless headphones to the Chromecast, after researching the topic, we have found solutions.

Read on below to find out how to listen to your Chromecast through wireless headphones…

Buy a Bluetooth transmitter to connect your Google Chromecast to wireless headphones

As Jared Busch explains in this YouTube video, a Bluetooth transmitter can be used to listen to the audio from a Chromecast.

Whether it’s Apple AirPods, Samsung Galaxy Buds or something totally different that you want to connect to your Chromecast, this solution should work for any Bluetooth headphones!

The TROND 2-in-1 Bluetooth V5.0 Transmitter and the ELEGIANT Bluetooth 5.0 Transmitter are two relatively cheap options to achieve this set-up, and you can click on either of those links to buy one.

They both feature atpX low latency technology, making the audio as smooth and synchronised to the video as possible.

How to use headphones with your tvReady to introduce your Samsung Galaxy Buds to your Google Chromecast?

How to connect Google Chromecast with wireless headphones using a Bluetooth transmitter

How will this actually work, though? Well, first, you’ll need to connect your Bluetooth transmitter to the TV via the telly’s headphone port using a 3.5mm cable.

Next, plug the transmitter into the power source. Many transmitters can run for extended periods of time using battery alone, whilst others have no battery at all. Either way, if you’re using the transmitter with a TV, there is no harm in leaving it charged for a prolonged amount of time.

Now, turn on the transmitter and pair it with the wireless headphones you wish to listen through. Once paired, Chromecast owners should be able to hear all the audio coming from their TV – Chromecast audio or otherwise.

With this set-up deployed, it should be easy for users to watch Netflix and stream music to their Chromecast without disturbing anyone else.

How to use headphones with your tvApple AirPods can be linked to your TV and your Chromecast with ease!

Some other options to try for connecting your Google Chromecast to Bluetooth headphones

If you don’t fancy buying a Bluetooth transmitter, there is one other, rather limited, option that we found.

An app called LocalCast has been invented and a feature they’re currently developing gives users the ability to listen to whatever they’re casting through their phone. There are unfortunately a few snags with this technology:

  • LocalCast’s new feature is in beta so it doesn’t consistently work.
  • The ability to route audio through the phone is only available to Android users.
  • There have been reported latency issues.
  • You can only stream local content from your phone in this way.

The fundamental problem with getting wireless headphones to connect to the Chromecast stems from the fact that the Chromecast lacks the necessary transmitters that devices such as the Google Home have.

As one user politely told another in the Google Support forums, it is possible to push audio through a Google Home to Bluetooth headphones, but the Chromecast simply doesn’t have the capability.

Realistically, using a Bluetooth transmitter like the TROND 2-in-1 Bluetooth V5.0 Transmitter or the ELEGIANT Bluetooth 5.0 Transmitter appears to be the simplest solution which would result in the best, low latency experience possible.

Do you have Samsung TV and you want to know how to connect wireless headphones to Samsung TV you came to the right place.

Using the method that we will tell you here, you can try to connect wireless headphones with any TV and just set, play your favourite show, increase the volume and enjoy without disturbing others. You don’t need to buy an extra adapter and lots of other stuff to make your TV Wireless. For example, you are at home with family or in a room with someone. And you don’t want to disturb them. So, connect your headphones wireless and sit on your couch or bed and enjoy.

How to Connect Wireless Headphones to Samsung TV? First of all, make sure that Your Samsung TV has a built-in Bluetooth feature. Turn on your TV and headphones. Press the home button using your TV remote, and you will see the home screen menu. Use the ups downs button to navigate and select the setting option. You will see different sound output option select wireless Bluetooth option and pair it.

If you will not see Bluetooth headphones list or you are not able to pair them continue to read, and we will show you in detail with images how you can configure Samsung Tv setting correctly to connect with your wireless headphone.

Table of Contents

What Did You Require To Connect Wireless Headphones To Samsung TV?

Before going to pairing, let’s see what accessories you need to connect wireless headphones to Samsung TV.

You should have the following things.

  1. Samsung smart TV that has a built-in Bluetooth feature.
  2. The button remote control. Do not use any touch remote it will not work because you can only open a secret or engineering menu with a remote that has buttons.
  3. Wireless headphones

How to Connect Wireless Headphones to Samsung TV

You have to fallow two steps to pair wireless headphones with Samsung TV. If your headphone connects with the first step, then that’s the good otherwise fallow second step.

Step 1

1. Open Menu

2. Go to Sound Option > Speaker Setting > SoundShare Setting.

How to use headphones with your tv

3. Below SoundShare Settings > Add a New Device. If you have a Samsung device, then it will connect because the setting only allows Samsung devices to connect directly. So if you have third-party headphones, don’t worry, and follow the second step, you will get your answer.

Step 2

Take a button remote control.

1. Open service menu by the following order hit info button > then menu button > mute button > and at the end hit the power button.

Push these buttons one by one and don’t take too much gap between two buttons. Just push them one by one. If everything goes well, you will see a menu appear like this one.

Different combinations of different devices. In our case, 2nd combination work for us.

  1. Mute + 1 + 8 + 2 + Power
  2. Display / Info + Menu + Mute + Power
  3. Display / Info + P.STD + Mute + Power
  4. P.STD + Help + Sleep + Power
  5. P.STD + Menu + Sleep + Power
  6. Sleep + P.STD + Mute + Power

How to use headphones with your tv

2. Now you have to select the options button and hit the enter button. You’ll see a menu like this.

How to use headphones with your tv

You do not need to change anything here just hit “Engineer Option,” and in Engineer Option, you have to find “BT_AUDIO_ON_OFF.”

How to use headphones with your tv

4. Turn it On.

5. Now turn off your TV and just hit the power button and Turn on your TV.

6. Now again, go to menu > setting > Speaker Setting.

7. Now you can see the Bluetooth headphones list appears.

How to use headphones with your tv

8. That is the thing we want. Now Enter on Bluetooth headphones list and turn on your wireless headphone. Press on the button on wireless headphones for 10 to 15 seconds. When your device found, leave it. Click on needs pairs, and you all set.

Make sure your wireless headphone charged.

We hope this guide will help you to connect your wireless headphones to Samsung TV.