Categories
Planning

How to open google chrome using command prompt on windows 10

Chrome browser supports opening from command line and run window. There are few command line switches as well that you can use to launch chrome incognito mode or with other features.

Open chrome from command line

Run below command to start chrome from CMD.

Run command for Chrome

Chrome can be opened from Run window by executing the command chrome .

Note that the run command is chrome whereas the CMD command is start chrome

However, you can make it work from CLI too by adding the chrome installation folder to the PATH environment variable. The installation path is “c:\Program Files (x86)\Google\Chrome\Application” . You can add this folder to the path by following the instructions from How to set path from command prompt

How to open Chrome as a different user

Use runas command to start chrome with the credentials of another user.

To start chrome as administrator of the system

Open a website in Chrome browser from command prompt

A website can be opened from command line by specifying the URL of the website.

Run command for Chrome to open a website

Run the command chrome websiteUrl to open a website in chrome.

Open chrome in incognito mode from command prompt

Chrome has command line switch to open with incognito mode. This is supported from command prompt and run command.

Command to open chrome in incognito mode from CMD

Command to open incognito mode from Run

When setting path via command via instructions:
setx path “%path%;c:\Program Files (x86)\Google\Chrome\Application”

I still cannot run “chrome” via CLI
(c:\>chrome)

what am I missing?

Even manually adding it via sysdm.cpl I cannot get it to run

You need to open a new command window after running ‘setx’ command. In the first command window, it still uses the previous value of path.

I want to open website in a new window rather than a new tab in existing chrome window. could not figure out how to do this. Any ideas?

I get error when I try to run chrome as admin.

Looks like the file was not ever created in the other account(admin). Login into the other account and run chrome once. I guess this should fix the problem.

Sounds like the Administrator account may not be enable yet on your PC. You can enable the admin account by running an elevated command prompt and type in exactly:
net user /add Administrator /active:yes

I’m sorry I hardly ever use MS Windows that command is actually:
net user administrator /active:yes

run and elevated command prompt right click on “run as administrator” and type in the following command exactly as follows:

net user administrator /active:ye

run and elevated command prompt right click on “run as administrator” and type in the following command exactly as follows:

net user administrator /active:yes

To open chrome with incognito window run this

Running in incognito mode seems to be disabling extensions. For example, adblocker extension does not function in this mode.

You need to go to chrome://extensions and checkmark the boxes for “Allow to run in Incognito” or something
Here is a screenshot: http://i.imgur.com/vWx2RIO.png

Can any one help me out to change the chrome download directory using CLI?

Is there any way to do a CTRL-F5 sort of thing when loading through cmd?

Is there a way to close Chrome with the command line?

Hi. Thank you for this great Web site. Is there a way to close Chrome or other software with the command line?

There are a lot of people in the world are using Google Chrome as the default browser. Though it’s useful most of the time, it may stop working suddenly. You’ll be depressed at that time. But don’t worry too much; MiniTool Solution provides many practical methods to fixing common Google Chrome problems that you may meet now and then.

How to Fix Google Chrome Not Working

It is no exaggeration to say that Google Chrome is the most popular browser throughout the world. Four main features of it are: users-friendly, fast, reliable, and stable. However, this doesn’t mean Google Chrome will work all the time. I mean, Google Chrome problems could occur accidentally; your browser may stop working on your device suddenly. How can you fix Google Chrome not working? Please follow these guides given below.

This post offers some useful ways and the detailed steps to help users fix the problem – videos not playing on Chrome.

Why is google chrome not working? This is a question hard to answer. But the Google Chrome issues can be divided into two categories roughly: Google Chrome not responding and Google Chrome won’t open. And the fixes for them will be introduced one by one.

Solutions to Google Chrome Not Responding

#1. Update Chrome to the Latest Version

  1. Navigate to Google Chrome on your device and open it.
  2. Click on the three dots (menu) icon in the top right corner.
  3. Select Help from the drop-down menu.
  4. Click About Google Chrome.
  5. The checking for updates process will be started. If there is any update available, it will be downloaded and installed automatically.

#2. Clear the Browsing Data

  1. Repeat step 1 and 2 mentioned in the previous solution.
  2. Select Settings from the menu.
  3. Scroll down until you find the Privacy and security option.
  4. Choose Clear browsing data under it.
  5. Select All time as the Time range.
  6. Check Browsing history, Cookies and other site data, and Cached images and files.
  7. Click on the Clear data button and wait.

#3. Reset Chrome

  1. Open Chrome -> click on the menu icon -> select Settings.
  2. Scroll down to the bottom to click Advanced.
  3. Scroll down to find Reset and clean up.
  4. Select Restore settings to their original defaults.
  5. Click on the Reset settings button.

In addition, you can try to disable extensions in Google Chrome and uninstall & reinstall the browser.

#4. Run SFC Scan

  1. Press Windows + S to open Windows search.
  2. Type cmd into the search box.
  3. Right click on Command Prompt & choose Run as administrator.
  4. Type sfc /scannow and hit Enter.
  5. Wait for the process to end.

You can also execute a DISM scan on your device. (What if the DISM failed?)

In addition, you can try to fix Google Chrome not responding or Google Chrome not working by clearing DNS cache: run Command Prompt as administrator -> type ipconfig /flushdns and press Enter -> type netsh winsock reset and press Enter.

#5. Add Chrome to the Firewall Exception List

  1. Open Windows search.
  2. Type Windows Firewall and press Enter.
  3. Select Allow an app or feature through Windows Defender Firewall in the left pane.
  4. Click on the Change settings button in the Allowed apps window.
  5. Navigate to Google Chrome and add a check mark into the box under both Private & Public.
  6. If you can’t find Chrome, please click on the Allow another app button and choose Chrome.
  7. Click Add and click OK to confirm.

What else you can try?

  • Check the proxy settings on your device.
  • Scan your device for virus and malware with powerful anti-virus programs.

Solutions to Google Chrome Won’t Open

Please try these methods if the Chrome won’t open at all.

  • Check whether Google Chrome is already opening.
  • Check your device for virus and malware.
  • Restart computer.
  • Uninstall and reinstall Chrome.

Many people are also bothered by Google Chrome crash; they may run into these errors when using the browser:

  • err_connection_reset_chrome
  • err_connection_closed
  • err_connection_failed

Here are some fixes you should try.

#1. Close Tabs, Extensions, and Apps

  1. Close all other tabs (except for the one showing the error message).
  2. Uninstall the Chrome extensions that are not necessarily needed.
  3. Close other programs and application that are running on the device.
  4. Pause downloads in Google Chrome.
  5. Delete unknown applications.

People are complaining that their download speed on Google Chrome is very slow; there’s how to speed up Chrome downloads.

#2. Restart Chrome

  1. Right click on the taskbar at the bottom.
  2. Choose Task Manager.
  3. Look for Google Chrome.
  4. Right click on it and choose End task.
  5. Reopen Google Chrome.

#3. Restart Your Device

How to restart Windows 10 computer:

  1. Click on the Start button.
  2. Click on the Power icon.
  3. Select Restart.
  • Facebook
  • Twitter
  • Linkedin
  • Reddit

About The Author

Sarah has been working as an editor at MiniTool since she graduated from university. Sarah aims at helping users with their computer problems such as disk errors and data loss. She feels a sense of accomplishment to see that users get their issues fixed relying on her articles. Besides, she likes to make friends and listen to music after work.

With a simple Windows command, you can open Google Chrome from command line aka, the Command Prompt. Here are the steps you should follow.

Though not every time, there might be use cases where you need to open the Chrome browser from command-line tools like Command Prompt. For example, if you are creating custom scripts, you need to use the command to run Google Chrome. In fact, you can also use the command to launch Google Chrome on schedule or open a web page on schedule using Task Scheduler.

The good thing is, you can easily open the Chrome window via the Command Prompt. Not only the regular Chrome but the incognito mode too.

So, without further ado, let me show you the procedure to open Google Chrome from Windows command line.

1. How to open Chrome from command-line

To open Chrome from Command Prompt you can use the start command. Here is how you can do it.

  1. Open the Start menu.
  2. Search for “cmd” and open the Command Prompt.
  3. After opening the Command Prompt, execute the below command to open the Chrome browser.
    start chrome
  4. To open a web page or website from the command line, use the below command. Replace example.com with the web address of your choice.
    start chrome https://example.com
  5. As soon as you execute the command, Windows will open the website in the Chrome browser.

2. How to open Chrome in incognito mode from Command Prompt

You can also open the Chrome incognito mode directly from the Command Prompt. All you have to do is execute the below command.

  1. Press the Windows key to open the Start menu.
  2. Search for “Command Prompt” and open it.
  3. In the Command Prompt window, execute the below command to open the Chrome incognito browser window.
    start chrome /incognito
  4. Of course, you can also launch a web page in the incognito mode using this command. Replace the dummy URL with the actual web page URL.
    start chrome /incognito https://example.com

3. How to Open Chrome with Run command

When needed, you can use the run dialog box to open the Chrome browser or any web page in the Chrome browser. Here’s how.

  1. Open the Run window with “Windows Key + R” shortcut.
  2. Type “start chrome” in the field and press “Enter”.
  3. As soon as you press the button, Chrome will open itself.
  4. You can also launch a specific web page. Just use the “start chrome https://example.com” command. Don’t forget to replace the dummy web page URL with the real URL.

A quick note:

When you open Chrome from the command-line, it opens the default or last opened Chrome profile. As of now, there is no way to open a specific Chrome profile. If you want to open a specific Chrome profile, I recommend you make that profile the default one in Windows. Also, as of now, there is no way to open multiple URLs from the command line.

That is all. I hope that helps. If you are stuck or need some help, comment below and I will try to help as much as possible.

You can do almost anything from Command Prompt in Windows 10, including opening the Google Chrome web browser. You can also open Chrome in incognito mode or go directly to a website. This is how you do it.

Open Chrome Using Command Prompt

First, open Command Prompt by typing “command” in the Windows 10 search bar, and then select “Command Prompt” in the search results.

At the command prompt, run the following command:

Chrome will now open. You can also do the same from the “Run” window.

Open Run by typing “Run” in the Windows 10 search bar and selecting the “Run” app.

here, write Chrome and then select the “OK” button.

Now the web browser will open.

Open Chrome as administrator

You can also open Chrome as an admin. You will need to use the runas command to accomplish the above. Run the following command at the command prompt:

You will then be prompted to enter your computer account admin password. Type in the password and press the Enter key to proceed.

You will now be running Chrome as administrator

Open Chrome in incognito mode

Open Chrome in incognito mode from the command prompt, run the following command:

Start chrome /incognito

To do this from the Run program, enter this command instead:

Chrome will now open in incognito mode.

Go directly to a specific website

If you want to skip a step and open a specific website in Chrome from the command prompt, you can do so by running this command:

start chrome www. .com

So if you wanted to go directly to How-To Geek, you would run this command:

start chrome www.howtogeek.com

Or, you can go to a specific website in incognito mode by adding the /incognito command. For example:

start chrome /incognito www.howtogeek.com

You can achieve the same goal using Run using this command:

Or, to open the site in incognito mode, use:

chrome /incognito www.howtogeek.com

That’s all about it!

10 Ways to Open Command Prompt in Windows 10

Carlos Delgado
  • April 14, 2020
  • 49.9K views

Learn how to open a new Google Chrome window with a custom URL and a specific window size launching it from the command prompt in Windows 10.

Before proceeding with the solution, we need to understand the problem. If you read carefully the documentation of Chromium or use a list of all the options that you can setup on Chromium in the command line, you will quickly find that you can launch Chrome (chromium) with a specific window size using the –window-size flag, for example, to open chrome with a custom size, you would simply run the following command in the command prompt:

Pitifully, with a default installation of Chrome, when it starts, it will have the last window size that the last user had, not the one we’re specifying on the command 🤔. This happen because we’re not changing the default user-data-dir property on the command as well. The user data directory contains profile data such as history, bookmarks, and cookies, as well as other per-installation local state. Each profile is a subdirectory (often Default) within the user data directory. This can be changed with the –user-data-dir flag on the command.

Opening a URL

Now, let’s explain what you came for, ideally, the command should just open a new URL in a window with a custom size. We would simply change the –user-data-dir to a custom directory that we will create in the desktop in this case, specify a framed window using the –chrome-frame flag and the URL with –app :

This will run Google Chrome with the desired window size (800×600) and opening the specified URL (bestfreehtmlcsstemplates.com). It’s worth to mention that you shouldn’t modify the size of the frame with the mouse, instead, close chrome and run the command again with a new size.

Note that after running for the first time, in the user-data-dir directory, some new files will be created:

You can delete them, but everytime that you run the command, the files appear again and again, so you can simply ignore the existence of this directory. Alternatively, you can run the command using a random temporary directory of the system like this:

In this way, you’ll never see a directory that stores tmp data of chrome, it will run always as a brand new chrome instance!

In many operating systems, including Linux, Windows, and Mac, a command prompt is where you enter commands to a command-line interpreter application. In layman’s terms, you enter commands into the command prompt, and then the interpreter command prompt performs those commands.

The commands you can enter run the gamut from automating tasks, admin functions, troubleshooting, debugging, and beyond. For those familiar with the command prompt, it’s easier and quicker to get things done with commands than with user interfaces that can be cumbersome. Once you learn to use the command prompt for your operating system of choice, you’ll find you can do most tasks much faster.

The “command prompt” takes a different form depending on the operating system. Considering it’s not immediately apparent how to access it on a Chromebook or other devices running Chrome OS, it’s not uncommon for people to assume it’s just not there.

The command prompt does exist on a Chromebook, just not in the sense that it exists as something you do within a separate application like on a Windows or Mac computer, where it’s known as the terminal. It doesn’t take much to get to a command prompt on a Chromebook, though.

We’ll be telling you just how you can get to the command prompt on your Chromebook, which may make getting things done on your computer a lot easier once you get the hang of it. You may be new to Chromebooks or the Chrome operating system, but when you’ve become used to having the option of using the command prompt, fret not. We’ve got your back.

Command Prompt – Chrome Shell (crosh)

The command prompt on a Chromebook is accessible from the Google Chrome Browser, which comes pre-installed. Okay, so, you’re probably thinking ‘well, how do I get there?’ It’s actually quite simple: you’ll issue commands using the crosh shell. A “shell” is an interface to the operating system that enables you to enter commands, run applications, and so on.

Accessing the crosh shell

Just press ctrl + alt + T and this brings you to what’s called the crosh shell (command prompt or terminal) on a Chromebook. The crosh shell will now launch in a separate tab of the Chrome browser. Once the crosh shell has launched, you’ll type “shell” to get to the root Linux shell from within your Chrome Browser.

To use the shell, you’ll need to be in “developer” mode; we also recommend knowing what you’re doing so things don’t go haywire and you don’t break your Chromebook. Or at the very least, find a guide that you can put a lot of faith in.

This Chromium OS documentation page is pretty beginner-friendly and easy to understand, so you won’t need to wade through eight pages of impenetrable technobabble just to understand your own Chromebook.

To see the basic crosh shell commands available on the Chromebook, you’d type “help” after the crosh command prompt. When you’re in need of more advanced commands type “help_advanced” instead. The advanced commands get used for debugging purposes.

The crosh Help command

Why would you want to use the command prompt or crosh shell on your Chromebook? Well, if your just curious and want to poke around on your Chromebook device, there are various commands you can run to check on things. Like what? In the basic help portion of crosh, you can use the ping command or the top command.

The “top” command shows you the system information and all the processes that are running during the current session. This is what it looks like when we type the “help” command in crosh on our Chromebook;

Help_advanced command

To do more advanced poking around, yes, that’s right you’ll need to type the help_advanced command and choose one of the commands that are listed on your Chromebook to check those specifics.

Even if you’re not a developer and don’t plan on debugging the system, crosh is useful for getting a status update on your Chromebook.

Some of the commands you may want to run are checking on the battery information of your Chromebook. You can make sure your battery’s firmware is up to date and trigger an update from crosh if you wish.

You could also test your battery to make sure it’s not having any health issues and that it’s working properly. Are you having connectivity problems? With help_advanced you’ll find command to enable you to can see what the connectivity status of your Chromebook is and work on getting things back up and running.

There are some useful debugging commands such as the ones listed above but most crosh commands are intended mostly for developers but can be useful to Chromebook power users as well.

Example crosh commands

The crosh commands are generally pretty intuitive. Here are some examples to get you started but be sure to run help and help_advanced.

  • help – As mentioned above, issue this command for help using crosh.
  • help_advanced – And, again, as mentioned above this is the advanced help command.
  • connectivity – Shows your connectivity status, which can be helpful if you’re having local network or Internet connectivity issues.
  • battery_test – This command shows the battery discharge rate for a number of seconds you specify. For example, you could set it to test the battery for 600 seconds: battery_test 600
  • memory_test – Tests free memory on your Chromebook.
  • top – Shows you what Chrome plug-ins, extensions, tabs, and so on are using resources.
  • ping – The standard ping command that’s useful for network troubleshooting.
  • sound – This command records audio using your Chromebook’s microphone then plays the sound back for you and you can save the audio as a file.
  • ssh – If you need to ssh into your web server or something, you can do it from your Chromebook using the ssh command.

This post covers the basics of the Chromebook’s crosh command prompt and the commands that can be used to do basic information checking. Any Chromebook user may want to find out basics and learn how to use the Chromebooks command shell if for nothing else out of curiosity or just because they can.

Besides, building a deeper understanding of the tech you use on a daily basis probably won’t be a bad thing. Just don’t get foolhardy with it; the other more advanced commands should be utilized by those who are very knowledgeable about what they’re doing or as intended by developers.

If you enjoyed this article, you might also enjoy How To Install Kali Linux on Chromebook.

Do you use crosh on your Chromebook? If so, how do you use it? Please tell us about it in the comments below!

Like with all pieces of software, the default settings in Chrome won’t please everybody. Most people will only need to change settings normally accessible through the menu. Others know about a hidden page, accessible by typing chrome://flags/ in the address bar.

But you have a third option to change Chrome’s behavior.

What Are Chrome Command-Line Switches?

These are simply parameters passed to an executable file. You can test them now. Open a command line prompt: press the Windows logo key, type “cmd” and open Command Prompt.

Change the active directory to Chrome’s installation path.

Now launch the browser in incognito mode.

In this case, –incognito is the command-line switch. You can test the rest of the commands in the command prompt. When you decide on the set of switches you want to use, you can add these to the Chrome shortcut. One of the next sections will explain this step.

Useful Chrome Command Line Switches Explained

Important: for some switches to take effect you need to close all Chrome windows before launching the executable with the parameters passed to it. Also, some of these command-line switches will work in Mac and Linux too.

This shows a frames-per-second counter, just like those you can see in 3D video games. It only counts frames when the screen is updated (movement, graphical changes).

This launches Chrome in incognito mode which leaves no traces of your browsing history. You can also launch in this mode by right-clicking on the Chrome shortcut from the taskbar.

Click on this link: https://www.google.ro/search?q=test+refferrer+url. From that page, click on the result that leads to https://www.whatismyreferer.com/. You will see that the website knows where you came from, the referring link. With the switch here, you can stop this behavior.

You can also chain switches. This means that you can use more than one parameter to pass to the executable. For example, you can use chrome –incognito –no-referrers .

This will restore all the tabs you had in Chrome when you last closed it. It’s true that you can set an option in Chrome’s settings as well to get this behavior. But remember, you can create two shortcuts on your desktop, with different purposes. For example, one where you open a single new tab and another where you restore the previous session.

As the name suggests, this disables all extensions and is useful for people that don’t use them. It may also be useful for less tech-savvy people as well. Some sites take advantage of people and trick them into installing unwanted and maybe malicious extensions. Imagine adding this to the Chrome shortcut of your grandmother’s PC. Now, no site will be able to add those extensions again and redirect her search traffic to some obscure site.

If you’re fed up with the notifications that appear in the top-left side of your browser, you can disable them entirely.

Note that you shouldn’t use this if you actually activated in-browser notifications for things such as Facebook or Gmail.

This forces the browser to open its window in maximized mode. It’s useful on versions of Windows where, for some reason, Chrome won’t remember its window settings.

Disables, in the current session, synchronization of passwords, bookmarks, history and everything else that’s normally synced to your Google account.

Useful if you messed with the wrong flag in “chrome://flags” and now your browser won’t start anymore. Launch Chrome with this switch, go to the flags page, reset settings to default and then start normally (without the switch).

Completely disables sound in Chrome.

How to Add a Command-Line Switch to the Chrome Shortcut

Right-click on your desktop, and go to “New” and then “Shortcut.”

This assumes Windows is installed to the C drive. Browse to “This PC -> C -> Program Files (x86) -> Google -> Chrome -> Application.” Select the Chrome executable, click “OK,” and then on “Next.”

Go to the shortcut created on your desktop. Right-click and select “Properties.” In the “Target” field enter your desired command-line switches. It’s important to add them after the quotes! If you add within the quotes, you will get an error.

Conclusion

You can consult this website for a comprehensive list of Chrome command-line switches. Note, however, that not all of them are compatible with the Windows version. Some are for mobile, others for Linux, others Chromium specific. Also, software is developed rapidly, and some switches are simply discarded in newer versions. But you can test in command prompt and see if the are what you need.

Our latest tutorials delivered straight to your inbox

I want to make a command like:

which will make a google chrome window to pop up with the site instantly. Is there any way to achieve this?

6 Answers 6

You can now choose to sort by Trending, which boosts votes that have happened recently, helping to surface more up-to-date answers.

Trending is based off of the highest score sort and falls back to it if no posts are trending.

This worked for me on Windows 10 and using Git Bash.

Opens the default browser with the URL.

Tested on Git Bash/Windows 10.

You can use explorer.exe that can open URL in default browser:

Therefore there is a weird bug: URL should not contain ? , so:

will fail, and you need to use:

By the way, I created bash function to open up Google page:

You can use it as follows:

I find it quite useful, especially while coding 😉

Tested on Bash on Windows (Ubuntu 16.04.3 LTS; GNU bash, wersja 4.3.48).

Here’s what I’m using to open a URL or a file with Google Chrome into incognito mode from Git bash (provided with Git for Windows):

1. Open System Variables

  • Hit + R at the same time to get command prompt.
  • Then type sysdm.cpl and hit the Enter key.
  • Go to Advanced 1 and select Environmental Variables 2
  • Select Path 3 from System variables and click on Edit button 4 .

Keep this window opened (while get the chrome.exe folder path).

2. Get the chrome.exe folder path

Right click (or left if you have your mouse as left-handed) the Chrome icon 5 (the one you use to open it) and select Properties 7 . Usually this method opens more Chrome actions so locate Google Chrome option 6 and right-click on it and click on Properties 7 .

On the Shortcut 8 tab select the folder path from Start in: 9 (Commonly %programfiles(x86)%\Google\Chrome\Application )

3. Adding Google Chrome folder path to Environment variables

Click on the New button 10 from previously opened Edit environment variable window and paste the Google Chrome folder path into the new added line 11 (delete the double quotes if exist at the beginning or the end of the path) and click on all the OK buttons from the opened windows.

4. Add custom command to bash

Open the Git bash terminal and edit (or create) the .bashrc file with your prefered text editor (Visual Studio code in this example)

Append the code from below. You can rename the function name ( chromeIt in this example) to your needs.

If you don’t want incognito mode remove the –incognito parameter.

Very important note: Verify that your line ending is set as UNIX (LF) 12 . If you don’t know how to do it search into google.

Save the .bashrc file and reload it (using the Git bash terminal):

or you can use the shorter version of the command:

Close the Git bash terminal window or enter exit and re-open it.

Try to open a URL:

I hope it works for you.

This should do the trick. I can’t test on Windows 10 but works fine on bash in Ubuntu

I am having a hard time to find how to save the page as html or .txt using command line in Chrome Browser,

This is what I’ve done so far,

This command will open a new window of Chrome browser and visit google.com but i couldn’t be able to figure our how can i save google.com as html or as txt file , is there anyway to do so using command prompt ?

3 Answers 3

You can now choose to sort by Trending, which boosts votes that have happened recently, helping to surface more up-to-date answers.

Trending is based off of the highest score sort and falls back to it if no posts are trending.

You cannot perform the task you describe manually, but you can perform it using WebDriver automation.

Chrome can be remote controlled using an API called WebDriver (part of Selenium 2 automating suite). WebDrive has bindings for various programming languages, including e.g. JavaScript and Python.

Here is example code for Python (not tested):

Do you really need to open Google Chrome? You can get the page source using Wget (available for UNIX systems or for Windows in this post on SuperUser). Once installed, just use the following command:

And this should be all 🙂 I don’t think there’s a way to tell Chrome to download the HTML from the command line though 🙁

UPDATE: There’s a repo on GitHub called chrome-cli that allows the user to control Chrome from the command line. Downside is that it only works on Mac OS X.

I created a small script to do perform exactly this task: https://github.com/abiyani/automate-save-page-as . See the demo gif in the README.

It automates the keyboard actions you would otherwise perform to save the page manually (literally sends those key signals to OS). As a side effect of it being used in another project of mine, it’s been tested on various linux flavors: Ubuntu, Mint, Fedora, etc – and works fine on all of them. It probably won’t work (at least without modifications) on Mac, and certainly not on Windows.

‘Just Google it’ is something we all hear multiple times a day. We open our browser and simply Google whatever is bothering us. Many of us use Google Chrome as our default browser, not only because it is reliable but also because we get the Google search engine as our homepage. However, even one of the most reliable browsers can cause problems. Sometimes, Chrome crashes, and others it may refuse to open. There are some easy fixes for this, and in this tutorial, I will show you how to fix Chrome not opening in Windows 10.

Fix Chrome Not Opening

The problem can be with your operating system or the browser. You can try these methods and see what works for you.

Restart

This is possibly the easiest solution that you can try. It has worked out for me on countless occasions, and it may work for you as well. Just Restart your computer and try opening Chrome again.

Date & Time

Sometimes, the wrong date and time can cause your apps to not work properly. Check the date and time and if they are wrong, follow the steps below to fix them:

Step-1: Right-click where you see the date and time on your taskbar.

Step-2: Select Adjust date/time.

Step-3: Make sure the toggles for Set the time automatically and Set the time zone automatically are turned On.

Step-4: Press Sync now.

Reinstall App

Step-1: Go to the Start Menu and click on the Settings cog. (Shortcut keys: Win + I)

Step-2: Select Apps.

Step-3: In the Apps & features section, scroll down and locate the Google Chrome app.

Step-4: Click on the app. Select Uninstall.

Step-5: Click on Uninstall again.

Step-6: Restart your computer.

Step-7: Use this link to download Chrome again.

Fix Chrome Not Opening by Renaming Icon

Step-1: Open File Explorer. (Shortcut keys: Win + E)

Step-2: In the bar at the top, add the following path and click Enter:
C:\Program Files (x86)\Google\Chrome\Application
If you get an error, try this path instead:
C:\Program Files\Google\Chrome\Application

Step-3: Locate the Chrome icon. Right-click on it and select Rename.

Step-4: Type a new name, and it can be anything you want (Chomexyz, for example). Once you do, press Enter.

Step-5: Right-click on the icon again, hover the cursor over Send to, and select Desktop (create shortcut)

Step-6: Go to your Desktop and delete the old Chrome icon.

Step-7: Right-click on the new Chrome icon that you just created on the desktop and click Rename. Change the name to what it was previously called, i.e., Chrome.

Step-8: Restart your computer and try opening Chrome again.

Step-9: If Chrome is now working properly, right-click on the Chrome icon in your taskbar.

Step-10: Select Unpin from Taskbar.

Step-11: Drag the new Chrome icon (available on the desktop) to the taskbar. This will pin it here.

Compatibility Settings

Step-1: Go to your desktop and locate the Chrome icon.

Step-2: Right-click on the icon and select Properties.

Step-3: Click on the Compatibility tab.

Step-4: Click on Run compatibility troubleshooter.

Step-5: Check if Chrome works now.

Step-6: If it still doesn’t, open the Compatibility tab in Properties again.

Step-7: Check the box. Run this program in compatibility mode in the Compatibility mode section.

Step-8: Press OK.

Step-9: If Chrome still doesn’t open even after trying step-4 and step-7, move on to the next steps.

Step-10: In Properties, in the compatibility tab, under the Settings section, check the boxes for Disable fullscreen optimizations and Register this program for restart.

Taskbar

It seems that enabling the Autohide taskbar in settings causes problems for Chrome. If you disable this feature, Chrome will work normally. To disable this function:

  1. Open Settings using shortcut keys Win + I.
  2. Select Personalization
  3. Select Taskbar from the left pane.
  4. Turn the toggle for Automatically hide the taskbar in desktop mode Off.

Network Commands

  1. Type cmd in the Start menu search bar.
  2. When the command prompt option shows, click on Run as administrator
  3. You will be asked, Do you want to allow this app to make changes to your device? Click Yes.
  4. Type the following command and press Enter: netsh int ip reset C:\RESETLOG.TXT
  5. Now type this command and press Enter: netsh winsock reset
  6. Now type this command and press Enter: ipconfig /flushdns
  7. Type exit and press Enter.
  8. Restart your computer and try opening Chrome again.

Fix Chrome Not Opening by Resetting Settings

Step-1: Open Settings using the shortcut keys Win + I.

Step-2: Select Network & Internet

Step-3: Choose Status from the left pane.

Step-4: Click on Network reset and confirm when asked again.

Hopefully, one of these methods will fix Chrome not opening on Windows 10 computers.

Google Chrome, one of the best and most popular web browsers that offer wonderful performance, could also let you down sometimes. Lots of users said they have ever bothered by slow Chrome: the Chrome loading slow, freezing, and running slow. This page shows you how to fix the issue when your Chrome loads slow on Windows.

Google Chrome, Mozilla Firefox, Microsoft Edge, and Safari are worldwide popular web browsers for searching information. They have many features that appeal to people: fast speed, stable performance, simple operation, and so on. However, you may find your Chrome loading slow sometimes; this is a very bad experience. But don’t worry; this post works on helping you troubleshoot Google Chrome slow loading.

Why Your Google Chrome Loads Slow

What causes Chrome slow to load? Many reasons should be blamed for this issue: internet connection, Hardware Acceleration, browser extensions, etc. Now, please take a look at the most possible causes.

  • Internet connection failure
  • Corrupt temporary data
  • Too many tabs, background apps, and downloads
  • Extension problems
  • Enabled Hardware Acceleration
  • Outdated software & system
  • Lack of local storage and hardware support

What users care more about when finding Google Chrome slow is: how to speed up the browser efficiently. They should try the following fixes one after another until the problem is solved.

Many people are asking why is Microsoft Edge so slow; they want to fix the problem and speed up their browsers greatly.

Chrome Loads Slow: How to Speed It up

How to troubleshoot Chrome loading slow on Windows 10?

#1. Restart Your Computer

It’s abnormal if Chrome takes a long time to load pages. When that really happens to you, please restart your computer first. This action will refresh your system and remove corrupted temporary data so as to fix Chrome loading pages slow.

#2. Close Tabs, Background Apps, and Pause Downloads

If too many tabs are opening in your Chrome browser, you should keep only one tab and close others unless they are very necessary.

Next, you need to check the apps running in the background on your computer and close unnecessary ones.

  1. Press Windows + I to open Settings.
  2. Select Privacy.
  3. Scroll down in the left sidebar to choose Background apps.
  4. Locate the Choose which apps can run in the background.
  5. Turn off the apps that are not necessarily needed.

You can also turn the switch to Off under Let apps run in the background.

In addition, you need to check downloads in your Chrome and suspend them temporarily. If you find Chrome loading very slow is still persist, please move on to the following methods.

#3. Disable Extensions and Blockers

The extensions or blockers installed in Google Chrome could be responsible for Chrome pages loading slowly. Here’s how to disable them.

  1. Open Chrome.
  2. Type chrome://extensions/ into the address bar and press Enter.
  3. Browse all the installed extensions.
  4. Disable the extensions you don’t really need by toggling off the switch.

You can remove all unnecessary extensions to speed up your Chrome. If it didn’t work, you can also try to fix the problem by deleting the browser bookmarks.

#4. Rename the Default Folder

  1. Press Windows + E to open File Explorer.
  2. Copy & paste this into the address bar: %LOCALAPPDATA%\Google\Chrome\User Data\.
  3. Press Enter and then locate the Default folder.
  4. Right click on the folder and select Rename.
  5. Type Backup Default or any other name you want.
  6. Press Enter to confirm.

#5. Reset Network Adapter

  1. Press Windows + S or click on the search icon/box to open the search window.
  2. Type cmd and then right click on Command Prompt to select Run as administrator.
  3. Type netsh winsock reset and press Enter.
  4. Restart your computer.

#6. Clear Browsing History, Cookies, and Caches

  1. Open Chrome.
  2. Type chrome://settings/clearBrowserData into the address bar and press Enter.
  3. Make sure Time range is set to All time.
  4. Check Browsing history, Cookies and other site data, and Cached images and files.
  5. Click Clear data and then wait.

#7. Reset or Reinstall Chrome

How to reset your Chrome browser:

  1. Open Chrome.
  2. Type chrome://settings/reset into the address bar and press Enter.
  3. Click Restore settings to their original defaults.
  4. Click Reset settings in the pop-up window to confirm.

If this didn’t work, you should try to uninstall & reinstall Chrome or use the following ways to fix Chrome loading pages slowly:

  • Disable Hardware Acceleration.
  • Enable network prediction service.
  • Run the Program Compatibility Troubleshooter.
  • Don’t show images on websites.
  • Use Chrome Cleanup Tool.
  • Fix DNS resolution problem.
  • Upgrade the local storage and hardware support.
  • Update operating system.
  • Facebook
  • Twitter
  • Linkedin
  • Reddit

About The Author

Sarah has been working as an editor at MiniTool since she graduated from university. Sarah aims at helping users with their computer problems such as disk errors and data loss. She feels a sense of accomplishment to see that users get their issues fixed relying on her articles. Besides, she likes to make friends and listen to music after work.

Do you need to view your hardware specification for a new upgrade? You can view all specifications, including your RAM storage, hardware information, processor information, and so much more, on your Windows 11.

This article will delve into how you can access PC specs in Windows 11.

How to Check PC Specs in Windows 11

There are multiple ways for you to check your PC specifications in Windows 11. From brief to detailed information about your PC, here are ways you can check PC Specs in Windows 11.

Using Properties

You can access PC specs by selecting Properties on This PC. Here is how you can view a brief specification of your PC from This PC:

  1. Open File Explorer.
  2. On the navigation panel to your left, locate This PC. You can also find it on the desktop.
  3. Right-click on This PC and select Properties.
  4. You can view your PC specs under Device Specifications.

Through the Settings App

The setting application has become the go-to destination for many users when they want to access information or features of their devices.

Likewise, you can view the device specification of your PC from the About section of the Settings application. Follow these instructions to check PC specs from your Windows settings:

  1. Open Start and select Settings.
  2. Under System, scroll down and select About.
  3. You can access your PC specs under Device Specifications.

Through Command Prompt

Users can carry out any command using the Command Prompt application on their Windows. Using the Command Prompt, you can view detailed information about your PC. Here are instructions for viewing PC specs in Windows 11 using the Command Prompt:

  1. Open Start. On the search bar, type cmd.
  2. Open elevated Command Prompt.

  • On the cmd window, type in the command systeminfo and hit enter.
  • You may view detailed specifications of your PC.
  • Through System Information

    If you want to access detailed system information about your PC, including BIOS Version and System Model, hop on to System Information. Follow these steps to view PC specs from System Information:

    1. Open Start.
    2. On the search bar, type in System Information and open it.
    3. Under System Summary, you may view much more detailed specifications of your device.

    Through PowerShell

    PowerShell uses interactive commands for users to carry out different actions in Windows 11. You also use PowerShell to access full device specifications on your Windows. Here are steps for you to view device specifications using PowerShell:

    1. On your taskbar, locate the Start button.
    2. Right-click on it and open Windows Terminal (Admin) to open PowerShell
    3. On the PowerShell window, type in the command Get-Computerinfo and press enter.
    4. You can view all your device specifications in the window.

    Through Task Manager

    You can view specifications such as CPU, Disk, Ethernet, WiFi, GPU, RAM, and so on in Task Manager. You can access these details following these few steps:

    1. Open Task Manager using the shortcut Ctrl + Shift + Esc
    2. On the Task Manager window, head to the Performance tab.

  • Scroll down and locate the specification you want to view on the left tab.
  • Hi! I’m Asmi and I love writing. I’m here to help you with technical fixes and general how-to(s). I am a HUGE fan of true crime documentaries and horror stories. So you bet I’m a fan favorite on barbecue nights!

    Chrome OS is an operating system in its own right but it works differently to Windows and Mac OS. It is based on Linux and anyone familiar with working with that operating system will feel right at home under the hood of Chrome OS. This tutorial is going to walk you through accessing the command line in Chrome OS and show you a few neat things you can do while you’re there.

    Chrome OS comes installed on a bunch of devices but is mainly for Chromebooks. It should not be mistaken for Chromium OS, which is an open source version of the Chrome browser and not the Chrome operating system. Chrome the browser and Chrome OS are also different things.

    Now that’s clarified, let’s get to the command line in Chrome OS.

    Accessing the command line in Chrome OS

    The command line in Chrome OS is called the Chrome Shell, CROSH for short. Where you access Terminal in Linux or Mac or CMD in Windows, you don’t have to do any of that with Chrome OS.

    To access it all you need do is press Ctrl + Alt + T on your Chromebook. You can use some very basic commands from here or type ‘shell’ to access a version of Bash. If you want to dig deeper, you will need to switch into Developer Mode and use Bash from there. This tutorial is looking at CROSH so will concentrate on that.

    Here are some basic commands you can use in the Chrome OS shell. Some of these require Bash so it’s best to log into that first.

    • Help : shows the general commands you can use in the shell.
    • Help_advanced : list debugging and advanced commands you can use in the shell.
    • Help : verify what a command does before you do it.
    • Exit : exits the shell.
    • Set_time : manually set the time in Chrome OS.
    • Uptime : check how long the Chromebook has been running. It also shows logged in users.
    • Sound record 10 : record audio input from the microphone for 10 seconds. Time can be adjusted.
    • xset m : Manually adjust mouse acceleration.
    • xset r : Manually adjust autorepeat behavior of the keyboard.
    • Connectivity: checks network status
    • Inputcontrol : adjust touchpad and mouse controls on compatible devices.
    • Top : shows all running processes on the system.
    • Battery_test TIME : check the battery info and how much battery is used up in a given time. For example, ‘Battery_test 60’ asks the system how much battery is used every minute (60 seconds).
    • Memory_test : runs tests on available memory. Memory used by Chrome OS is not tested.
    • Storage_status : provides information on SMART storage devices.
    • Storage_test_1 : Performs low level SMART device test.
    • Storage_test_2 : Performs deep level SMART device test.
    • Ping URL : performs a Packet Internet GroPe to check connectivity.
    • Network_diag : performs network diagnostics
    • Tracepath : performs a trace of a route, same as traceroute.
    • Route : displays routing tables.
    • Ssh : established an SSH connection to a given address.
    • Ssh_forget_host : forget a previously connected SSH host.
    • Set_apn : sets an APN for cell connected Chromebooks.
    • Set_cellular_ppp : set PPP username and password for cellular connections.
    • Tpm_status: Trusted Platform Module status.
    • Upload_crashes : upload crash reports to Google.
    • Systrace: start system tracing for system debugging

    Unless you’re having problems with your Chromebook, there should be no need to ever use the shell or bash in Chrome OS. However, those of us who love all things technical are going to want to have an explore to see what you can do. Some of these commands will be useful for troubleshooting but to be honest, the Chromebook doesn’t go wrong very often and there are lots of software tools that can get the job done too.

    That said, CROSH is a decent way to access under the hood of your Chromebook. Your options are purposely limited as there isn’t much to test or adjust within Chrome OS and that is intentional. The purpose of Chromebooks is to provide simple, reliable internet-enabled applications for light use. I think Chrome OS delivers on that and is an excellent option for people who don’t require a full laptop.

    For the geeks among us there are multiple versions of Linux, Mac OS and Windows 10 if we want to get technical. For everyone else, Chrome OS balances ease of use with decent features for a good price.

    Do you know any other useful CROSH commands you’re willing to share? Know any other tricks to tame the Chromebook? Tell us about it below if you do!