August 1, 2019, 10:24am EDT
Apple AirPods can sometimes start acting up after a year of use. Whether you’re running into this problem or you bought AirPods used, the best solution is to reset the earbuds. Here’s how to make your AirPods perform like new.
Unpairing Your AirPods
Although unpairing your AirPods from your iPhone or iPad isn’t required to reset the headphones, Apple recommends this step to remove them from your account.
You can also unpair your AirPods from Android smartphones, PCs, and other devices to ensure that the earbuds act as new. These instructions are primarily for iPhone and iPad users, but the steps can be similarly replicated on whatever hardware you own.
Note: If you’re buying AirPods secondhand and haven’t connected them to your devices, you can skip the unpairing process and move to the next section.
Start by jumping into your phone’s or tablet’s Bluetooth settings. Access this menu by opening the “Settings” app and then select “Bluetooth.”
Locate your AirPods from the list of paired devices. Tap on the “i” information icon next to the headphone’s name.
Next, select “Forget this device” to unpair the AirPods.
The AirPods can be unpaired from your iPhone or iPad whether the earbuds are currently connected or not. Either way, the headphones will be removed from your Apple account.
Resettings Your AirPods
Now it’s time to wipe your Apple AirPods. Before you start, place both of the earbuds into the charging case and keep the lid closed for at least 30 seconds
Next, open the AirPod case’s lid. Flipping the case over, locate the setup button on the back of the device.
Press and hold the button until the case’s status light blinks amber then flashes white continuously. This process can take up to 20 seconds.
Repairing Your AirPods
Lastly, reconnect the AirPods to your iPhone or iPad. Thanks to the inclusion of the W1 or H1 chip, opening the lid of the headphone case near one of Apple’s devices will automatically display a pop-up menu.
Tap on “Connect” to pair the AirPods.
To pair the headphones to an Android smartphone or Windows PC, open the case’s lid and then press and hold the AirPods’ setup button until the status light starts blinking. Go to your device’s Bluetooth menu and connect to the earbuds as you would with other accessories.
AirPods are very easy to use, and the process to reset them is just as simple. Wiping the earbuds might take a couple of minutes, but it solves so many problems that tend to plague the wireless headphones.
Apple’s original AirPods, second-generation AirPods and AirPods Pro all have a reset function that returns them to their factory settings. This can come in handy if you’re handing down the wireless earphones to someone else or you’re having any sort of problem with them.
Here’s a video walkthrough of how to reset AirPods and AirPods Pro:
How to Reset AirPods and AirPods Pro
- Put your AirPods in their case and close the lid.
- Wait 30 seconds, then open the lid.
On your iOS device, go to Settings -> Bluetooth and tap the circled “i” icon next to your AirPods.
And that’s all there is to it. Note that now the AirPods are reset they will no longer automatically recognize any of the devices linked to your iCloud account. Opening the AirPods case near to an iOS device will initiate the setup process, just like the first time you used them.
Want new AirPods or AirPods Pro?
Check our constantly updated guide for best deals on AirPods.
AirPods are a great way to explore your favorite music, attend your calls and to look uber stylish. But if your AirPods have been acting up recently, then the most common solution is to reset and return AirPods to factory default settings. In doing so, you also reset the glitch that might be creating the issue.
The process to reset Apple AirPods or AirPods 2 or Pro is quite simple; majorly because you don’t have to worry about data back-up or any other jazz that you have to go through while resetting your Mac or iPhone. However, before you understand the reset procedure, let’s check out the situations where it can help.
Why Reset AirPods?
While AirPods are a pretty dependable item, but at times you may face some issues in usage. From battery issues to problems with audio delivery, there might be a number of problems where resetting your AirPods could be the perfect solution. Here are a few examples:
- AirPods’ battery draining quickly
- AirPods isn’t charging
- AirPods won’t start even after loading
- No sound in the right/left AirPod
- Inconsistent audio delivery
- The compatible device does not detect AirPods
- AirPods does not connect with a compatible device
Though not just for troubleshooting, it is also advisable to reset your AirPods before :
- You plan to part ways with them i.e. either sell or hand them down
- To sync AirPods to another compatible device
- When you are buying a second-hand or refurbished AirPods
How to Reset AirPods, 2 or AirPods Pro to Factory Default Settings
While it is not a compulsion, but Apple suggests that you should first unpair your AirPods from your iPhone or iPad. This is mainly done to remove them from your account so that it is not connected during the reset.
How to Unpair Your AirPods From iPhone or iPad
- Go to the Setting app on your iPhone
- Tap on Bluetooth.
- Find your AirPods from My Devices section and tap on the ‘i’ in front of them.
- Select Forget this device from the options and then tap on Forget Device again to confirm the action.
How to Factory Reset AirPods Pro, AirPods 1/2
Before we proceed with the steps, ensure that your AirPods and the charging case are sufficiently charged.
- Place your AirPods in their case and close the lid.
- Wait for about 30 seconds.
- Now, open the lid and then press and hold the setup button on the back of the case until the status light inside the case flashes amber a few times and then flashes white continuously.
Close the lid, your Airpods are now restored to factory settings. To pair your device with iPhone, iPad, Apple Watch, Mac, and Apple TV, keep it close to the device and follow the onscreen instruction.
For more details, follow our step-by-step instructions. If you have had some custom settings, they have also been reset. You will have to change the AirPods settings as per your choice.
Just Reset and Move On!!
Troubles with your Airpods, just reset and move on; trouble with your iPhone or iPad, just reset and move on. Only if this could also be the solution to all our problems could be the same, just reset and move on. Though, in retrospect, reset is not always the solution, sometimes you have to trust an Apple support professional to solve the issue. Similar to how you come to our site for troubleshooting tips and tricks.
You would like to read these posts as well:
Apple AirPods comes with the handy feature that lets you connect with your iPhone and other Apple devices instantly. However, you might get to see the AirPods floundering to connect with the paired devices. Plus, sometimes it may go totally wrong from what you expect. In such situations, you have no other way, but to reset Apple AirPods.
Whether you are trying to resolve an issue or giving the device to someone else, here is a complete guide to reset Apple AirPods.
Why do You Want to Reset Apple AirPods?
Before you go through the resetting process, you must be able to identify the problem and troubleshooting solutions for the same. Sometimes, the minor issues you face with the AirPods might not need an entire reset and reconnection. Therefore, get to know about your situation before trying to reset Apple AirPods. Here are some reasonable situations most users want to reset their AirPods.
- Issues with pairing or identification.
- Handing over your AirPods to someone.
- Selling the used Apple AirPods.
- Pairing with a new iPhone.
- Pairing with an Android/Windows/Mac/Linux system.
- Battery Drains faster.
- AirPods seems dead (even after charging).
- One of the buds not working.
- Find My AirPods not identifying.
- Need to reset the double-tap actions.
- Stuttering or glitches in the audio output.
- Apple AirPods went through some accidents (water/drop) and trying to recover.
If you have already identified the issue and thinking of resetting the AirPods, read further.
How to Reset AirPods?
Almost every AirPods users pair them with iPhone or iPad devices, rather than Android or Windows devices. Thus, it becomes necessary to remove the AirPods from the paired device before resetting. Read how to reset Apple AirPods.
- Open Settings on your paired Apple iPhone.
- Head to Bluetooth screen.
- Check for your AirPods under “My Devices.”
- Tap on “i” next to AirPods
- Tap “Forget This Device.”
- Confirm “Forget.”
How to Hard Reset AirPods?
Once you confirm to Forget the device from your iPhone, every Apple devices on the same iCloud will remove the AirPods from the paired list. Therefore, if you have paired the same AirPods with Apple Watch, it will get removed automatically, once you choose to forget from your iPhone. After removing from devices, move on to hard reset Apple AirPods manually.
- Now take your AirPods on hands and put them in the case.
- Close the lid and wait for at least 30 seconds.
- Open the lid.
- Press and hold the button at the back of your Apple AirPods Case.
- Release the button when you see the orange/amber light blinking on the AirPods, and then turns to flash white.
Now, your AirPods got hard reset, removed and reset from every device and are ready to pair with new devices.
As you have already reset your Apple AirPods, most of the issues you have been facing would be already diminished by now.
You are now good to use the Apple AirPods with your iPhone as new. Next time you face any identical issues with AirPods while using with your, iPad or Mac, follow the same steps as above to reset and reconnect Apple AirPods. You have to follow the same AirPod reset steps if you are reselling your AirPods to somebody.
At times there can be pairing issues with Apple AirPods and Airpods Pro, sound issues and charging issues too. The first thing that comes in your mind must be how to reset Apple AirPods, isn’t it? Well, there is a way to do so and we will be sharing the instructions to reset apple AirPods and fix the errors without having to go to the service center.
However, it is not difficult to reset Apple AirPods and once you reach the end of this article, you will figure out how to reset apple AirPods. The whole process is explained in detail below, make sure you follow it correctly.
How to Reset Apple AirPods
What is the need to reset AirPods?
Even if it is an Apple product, it doesn’t mean that it would be perfect and free from any software issues. There can be issues with battery drainage, sound issues, and pairing issues which are seriously very irritating.
All of this can be fixed by resetting the AirPods, in most cases, while some of you may have to run to the Apple service center if your issues are not fixed even after resetting your AirPods.
- Here’s how resetting your Airpods can help you:
- It can fix battery drainage issues
- It can fix charging issues
- No sound in the left or right pod can also be fixed
- Pairing issues
- The device failed to detect the Airpods
How to reset Apple AirPods Pro?
Even though it is not necessary but we recommend you to unpair your Pods from the device it is currently connected to. This has to be done in order to remove them from any of the accounts it is connected to during the reset.
To unpair your Apple AirPods:
- Launch the Settings app on your iPhone.
- Go to Bluetooth.
- Find your AirPods under my devices section and tap on the “I” button next to it.
- Now select the option “forget this device” from the list of options and tap on forget device once more to confirm your action.
In this way you have successfully reset your Apple AirPods, the next section of the article instructs you on how to reset your Apple AirPods 2. You must also check out How to Fix One AirPod Not Working?
How to Reset Apple Airpods 2?
Before proceeding with the instructions make sure that your Pods and the charging cases are fully charged. If not, charge them to up to 80 percent before following this guide.
Resetting Apple AirPods 2:
- Put your AirPods in the case and close the box.
- Now, wait for half a minute.
- You can now open the lid, press and hold the setup button which is on the back of the case. You have to keep holding the button until the status light starts flashing a few times for a continuous period of time.
- Close the lid once again and that’s it. Your AirPods 2 is now restored to factory settings. You can now try to pair them with your Apple device and see whether the pairing issue still persists.
Still, facing issues?
If you are still facing issues such as pairing failure, device not detected, charging issues, even after a factory reset, there are high chances that something is wrong with your AirPods. In this case, we recommend you visit the Apple doctor, the service center, they will fix your issue easily. Check out How to Fix Bluetooth Not Available Error in Mac?
In this article, we have penned down the instructions on how to reset apple AirPods and how to reset Apple AirPods 2. The whole process is pretty straightforward but for those who haven’t done this before, our guide will help you out. If resetting AirPods hasn’t fixed the problem, visit the support center of Apple and tell them your issues.
Do you need to reset your AirPods but can’t successfully do it?
What if you tried several times to reset your AirPods but you are not seeing the amber light on the charging case?
If this happens, the usual suspect would be that there’s something wrong with the actual hardware.
Truth is, there’s a lot of factors you need to check first before you have it replaced. In this guide, we will show you how to check both the software settings and the physical aspects of your AirPods so that you can figure out where exactly the issue lies and whether a replacement is even needed.
Let’s get started!
1. Make Sure That Your AirPods Fit in the Case.
It’s important to check that your AirPods fit into place when you put it back into the charging case.
If it is loose, your charging case will think that is not connected and you will not be able to reset it. Try pressing the AirPods down gently to the charging case and then try resetting it.
If, however, you still find the AirPods won’t reset, then try to remove the AirPods from the case and put it back. Make sure to close the lid to ensure that it fits correctly.
One handy tip to identify if the issue is with the charging case itself is by charging the AirPods and then inspecting if whether the AirPods are getting charged. If that too doesn’t work either, then we highly recommend that you check out our article on how to fix AirPods that is not charging .
We’ve found that after charging the AirPods after some time, the AirPods were able to be reset.
2. Clean the AirPods.
It’s also possible that dirt and debris stuck on your AirPods can hinder the contact between your AirPods and the charging plate inside the case.
To fix this issue, you will need to clean your AirPods so that they are able to successfully make contact for charging. Also, don’t forget to make sure that you clean the charging case particularly the insides where the charging plate is located.
You may use a dry cotton bud and gently swipe in an outwards option to remove any debris. If the dirt has hardened, damped your cotton bud with a little bit of alcohol .
This liquid will evaporate quickly and will not cause short-circuit after you clean it. Also, make sure to remove the dirt from the upper and outside sections of the charging case with a soft-bristle brush . This will help remove any excess dust.
Once you’ve cleaned both your AirPods and the charging case, try once again to reset your AirPods to see if it works.
3. Forget AirPods on Paired Apple Device.
Another effective solution that has been suggested by users in the Apple support community forum was to unpair your AirPods completely from your device as well as resetting the network settings on the device.
This will help to remove any issues with the connection established between your AirPods and the device.
Here’s how you can do it:
- First, go to the Settings of your iPhone or iPad, then tap on Bluetooth.
- Next, tap the ( i ) icon next to your AirPods, tap Forget This Device and then Confirm.
- Then, go back to the Settings on your iPhone or iPad, and tap on General.
- After that, tap on Reset and then tap Reset Network Settings.
- Finally, provide the passcode of your iPhone or iPad if applicable.
After the unpairing process your AirPods and removing any network conflict, you should be able to reset it.
4. Drain the Battery and Charge it.
A few users have also reported that completely draining the AirPods battery to zero and trying to charge it again before resetting has managed to the trick.
If you’re interested to try out this solution, you can leave it somewhere dry and safe so it can drain the battery for 2 or 3 days (assuming that your AirPods are currently fully charged).
After draining the battery, charge it to the full capacity. You can now try to do the reset process on your AirPods.
5. Test Using Different AirPods.
At this point, if you continue to find that your AirPods won’t reset, we recommend that you try borrowing a different pair of AirPods from someone and see if they’re able to be reset.
If the borrowed AirPods do get reset but yours don’t, then it means that there is an issue with your AirPods in which case Method 6 (below) will outline how you can get in touch with Apple regarding this.
Do make sure that you’ve tried the previous methods in this post before you proceed ahead with the manual inspection by Apple.
6. Get in Touch With Apple Support.
It’s plausible that despite having tried the methods above, that you still can’t get your AirPods to reset.
In which case, the best course of action would be to obtain the help of the experts. Make sure you get the serial number of your device before calling Apple Support .
Alternatively, you can go to the nearest Apple Store and let the Apple-Certified technicians manually check the AirPods if they qualify for a replacement.
Whether or not you qualify for a free replacement is up to the warranty you currently have. So we highly recommend that you check your available warranty options . Do take note that if you’ve just recently bought your AirPods, then you have up to 14 days to get your money back or obtain a replacement as per Apple’s returns and refunds policy .
This wraps up our post for today. Hopefully, you were able to learn how to fix your AirPods that won’t reset after reading this article. If you have questions related to this topic, please feel free to leave a comment below. Likewise, if you have any other alternative solutions which you’ve found to work, share it below and we will credit you with the solution the next time we update this post. 😀
If this guide helped you, please share it. 🙂
When you’re having connection problems, or if you find that they are not charging correctly, you may need to reset your AirPods or AirPods Pro. Here’s how to get it done.
It’s been a very long time since Apple shipped a device with a reset switch built in, but still even its latest products will sometimes need more than a restart. The most common reasons for needing to reset any edition of the AirPods, or the AirPods Pro, is that you’re having problems connecting them.
On some occasions, though, you can also find that your AirPods and AirPods case are not charging correctly. Over time, that could be that really you’re just hitting the inevitable decline of charging capacity in these tiny batteries, or it can be a problem that resetting will solve.
Start with your iPhone
Before you do anything with the AirPods themselves, unpair them from your iPhone. If your problem is just that you cannot connect them at all, then you can skip this part.
But iPhones retain a list of trusted Bluetooth devices, so that you can easily re-pair and reconnect with them. If you’re having problems with connection, it’s better to take the AirPods off that list.
How to remove AirPods from the iPhone trusted Bluetooth device list
- On your iPhone, go to Settings
- Choose Bluetooth
- Look for your AirPods or AirPods Pro in the list
- Tap the i icon next to the pair you want to reset
- In the screen that appears, tap Forget this Device
- Tap again to confirm it
How to reset AirPods
Now leave your iPhone aside and take your AirPods. Then put them in their charging case, and close the lid. Find the setup button on the back of the AirPods case. It’s very small, and as it’s a white button on a white background, it’s also easier to miss than you’d like.
- Wait half a minute and then open the lid of the charging case
- Keep the lid open and, importantly, keep the AirPods still in the case
- Press and hold the setup button on the AirPods case
- Keep holding the setup button until you see the status light flash amber
The status light is the one you see glow green when the case is charged, and amber when it’s low on battery power. The moment you press and hold the reset button, though, it turns white. Then after a few seconds, it starts to flash white. Keep holding the button down, though, and it will turn to flashing amber.
When the light is amber and flashing, your AirPods have been factory reset and are ready to pair with your iPhone. Keep the AirPods in the case as you start.
How to pair AirPods to iPhone
- Close the charging case’s lid
- Hold the case close to your iPhone and open the lid
- Wait for instructions to appear on your iPhone screen
- Tap Connect and follow the on-screen steps
If you get an error messaging saying “Not Your AirPods” when you hold them next to your iPhone, you haven’t done the first step of telling the phone to forget the device. Do that now and go back through these steps.
This all works because sometimes Bluetooth is fussy at the best of times. Apple’s technology helps, but it still isn’t entirely perfect. In essence, this tip is the AirPods equivalent of turning the device on and off again.
Nonetheless, it will usually work for you — and there will be times when it fails. If it does, then your next step is to restart the iPhone and begin working through this procedure again. After that, you may need to consult Apple.
Keep up with AppleInsider by downloading the AppleInsider app for iOS, and follow us on YouTube, Twitter @appleinsider and Facebook for live, late-breaking coverage. You can also check out our official Instagram account for exclusive photos.
AppleInsider has affiliate partnerships and may earn commission on products purchased through affiliate links. These partnerships do not influence our editorial content.
Last updated on March 24, 2019 by Ekaant Puri Leave a Comment
Hello friends, Today I will share a method on how to reset AirPods. Users can factory reset Apple AirPods. All your AirPods data will be permanently deleted and it will also un-pair your AirPods from any iOS device. You can easily remove all the errors from your AirPods.
Apple AirPods has become the world most popular wireless earphones. If a person purchases an Apple device, then it is very common that the same person will purchase an Apple AirPods as well. Not only Apple users do buy it, besides of it other device users such as Android users, Windows users they also buy Apple AirPods because of its fantastic sound quality. But, we all know that it is a kind of technical device which can malfunction or fail sometimes. Thus, the question arises here is that how to reset AirPods? Fortunately, there is a genuine and authentic way to do so.
Why Should I Reset AirPods?
This is a very general question that why should I reset my Apple AirPods. Resetting means revering everything back to the factory version which leads to stopping malfunctioning of a device, in our case its AirPods. If you have any kind of issue with your Apple AirPods and not able to fix it quickly then, of course, you can troubleshoot your AirPods by using the resetting option. Sometimes, the resting options worked as a magical wand. Also, it plays a significant role in fixing the error from the AirPods system.
How to Reset AirPods – Troubleshoot AirPods
In this part of the article, we will talk about the procedure on how to reset AirPods. Apple AirPods provides us amazing troubleshooting system which is known as resetting the AirPods. If you have used any other wireless earphones. Then, you might remember that they do not have any resting or troubleshooting option in them. Luckily, the Apple AirPods do allow us to reset it if a person is facing any malfunction while using it. The step by step guide about how to reset AirPods is given in this segment of the article.
- Open the case of your Apple AirPods.
- Now, press and hold the white button which is at the back part of the AirPods.
- Press and hold it up to 30 seconds until the light becomes red.
- You will see that the light become red and then again gets to green.
- Now, close the case of the Apple AirPods.
- After that, when you will open the case and put it near to the device, then you will get the setup option.
- That’s it. You have successfully learned how to reset AirPods.
Apple AirPods Not Resetting
Sometimes what happens is that we try to reset our Apple AirPods, but it does not do so. So, the question puts up here is that how we can reset our Apple AirPods if it is not resetting up. Generally, this kind of issue is not faced by the majority of the peoples; only some countable AirPods may have this issue. But, if somehow your Apple AirPods is having this issue that is Apple AirPods not resetting, then you can take it to the Apple Service Center. Taking it to the Apple Service Center, the team will help you with that and somehow if it can be fixed, then you will get a brand new AirPods.
This is all about how to reset AirPods. This was the easiest and working method if you want to reset your Apple AirPods. Also, there is no other method available to reset the Apple AirPods. But, somehow if you got any, then you can use it to reset AirPods. Keep in mind that not every kind of issues can be solved by resting the Apple AirPods. Some issue is physical which can be done only at the Service Centers. I hope using this article you have learned how to reset AirPods. If you want to share this article with your friends, who want to know how to reset AirPods then make sure you do so.
Resetting AirPods returns AirPods to factory default settings, this procedure can be helpful for troubleshooting various problems with AirPods, but it can also be necessary if you plan on giving used AirPods to someone else, or even to sync and connect the AirPods to another compatible device. Essentially this will be resetting AirPods to factory settings, as if they were brand new.
Some common reasons to reset AirPods for troubleshooting reasons are if the airPods are suddenly not showing up as available, if the AirPods case is not charging the AirPods out of the blue, if there are curious battery issues with the AirPods, amongst other issues that could be experienced. Usually a quick reset to factory settings fixes these type of AirPods issues quickly.
How to Reset AirPods
- Make sure the AirPods and the charging case all have a battery charge available
- Place both AirPods into the charging case if you haven’t done so already, close the lid for 15 seconds
- Open the lid of the AirPods case, keeping the AirPods secured in place
- Turn the AirPods Case around and look for the small button on the back, press and hold the case button until the light flashes orange a few times, and then flashes white – this indicates the AirPods have been reset
Now that the AirPods have been reset, if you open the AirPods case near an iPhone or iPad, the the setup for AirPods process will begin automatically again.
If you are still experiencing issues with the AirPods, the first thing you should do is charge the AirPods longer in their case, aim for at least 20 minutes or longer of charging. Then you can also try to select them from the iPhone or iPad Settings app and either forget the Bluetooth device or even disconnect the Bluetooth device from iOS and then start the AirPods reset process over again.
It can also be a good idea to check for and update AirPods firmware software if there are updates available.
Resetting devices to factory defaults can be a common troubleshooting approach to figuring out and resolving a variety of software issues, and not just for AirPods. You can also reset iPhone to factory settings, reset and erase iPad and iPad Pro, reset Mac to factory settings, and even reset Windows 10 to factory default settings too. For resetting AirPods to factory settings there is no concern for data loss, whereas for resetting other devices it is important to have a backup available before you reset the device, otherwise you may permanently lose data from an iPhone, iPad, Mac, or PC.
If you have any other tips for resetting AirPods for any reason, either to return them to factory settings to sync with another device, or to troubleshoot something, share your experiences in the comments!