Categories
Self-organization

How to exit safe mode on windows 10

Safe mode starts Windows in a basic state, using a limited set of files and drivers. If a problem doesn’t happen in safe mode, this means that default settings and basic device drivers aren’t causing the issue. Observing Windows in safe mode enables you to narrow down the source of a problem, and can help you troubleshoot problems on your PC.

There are two versions of safe mode: Safe Mode and Safe Mode with Networking. Safe Mode with Networking adds the network drivers and services you’ll need to access the Internet and other computers on your network.

Select from the following sections to find out how to start your PC in safe mode from Settings, from the sign-in screen, or from a black or blank screen.

Press Windows logo key + I on your keyboard to open Settings. If that doesn’t work, select the Start button, then select Settings .

Select Update & Security > Recovery .
Open Recovery Settings

Under Advanced startup, select Restart now.

After your PC restarts to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart. You may be asked to enter your BitLocker recovery key.

How to exit safe mode on windows 10

How to exit safe mode on windows 10

How to exit safe mode on windows 10

How to exit safe mode on windows 10

After your PC restarts, you’ll see a list of options. Select 4 or press F4 to start your PC in Safe Mode. Or if you’ll need to use the Internet, select 5 or press F5 for Safe Mode with Networking.

When you can’t open Settings to get into safe mode, restart your device from the Windows sign-in screen.

On the Windows sign-in screen, press and hold the Shift key while you select the Power > Restart .

After your PC restarts to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart. You may be asked to enter your BitLocker recovery key.

How to exit safe mode on windows 10

How to exit safe mode on windows 10

How to exit safe mode on windows 10

How to exit safe mode on windows 10

After your PC restarts, you’ll see a list of options. Select 4 or F4 to start your PC in safe mode. Or if you’ll need to use the Internet, select 5 or F5 for Safe Mode with Networking.

Note: If you’ve encrypted your device, you’ll need your BitLocker key to start in safe mode.

Before you enter safe mode, you need to enter the Windows Recovery Environment (winRE). To do this, you will repeatedly turn your device off, then on:

Hold down the power button for 10 seconds to turn off your device.

Press the power button again to turn on your device.

On the first sign that Windows has started (for example, some devices show the manufacturer’s logo when restarting) hold down the power button for 10 seconds to turn off your device.

Press the power button again to turn on your device.

When Windows restarts, hold down the power button for 10 seconds to turn off your device.

Press the power button again to turn on your device.

Allow your device to fully restart. You will enter winRE.

Now that you are in winRE, you will follow these steps to take you to safe mode:

On the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart.

How to exit safe mode on windows 10

How to exit safe mode on windows 10

How to exit safe mode on windows 10

How to exit safe mode on windows 10

After your device restarts, you’ll see a list of options. Select option 5 from the list or press F5 for Safe Mode with Networking.

If you need more info on a black or blank screen error, see Troubleshoot black or blank screen errors.

Notes: If you need to exit safe mode, simply restart your device, or:

Press the Windows logo key + R.

Type msconfig in the Open box and then select OK.

Select the Boot tab.

Under Boot options, clear the Safe boot checkbox.

Windows safe mode is a system startup option designed to assist in troubleshooting problems with the Windows operating system. When a computer is started in safe mode, Windows loads only the very basic drivers and system files that are necessary to run the computer. This allows you to verify that the default system settings and device drivers are not the cause of the problems you are having. Also, since programs that normally start automatically when Windows starts are not run in safe mode, it allows you to run programs one at a time in an attempt to isolate the program that may be causing the problem. You can also change various system options, such as which programs are automatically started when the system is first booted up, or run virus scans and other repair utilities.

How to Start Windows in Safe Mode

To start Windows in safe mode, simply press and hold the “F8” key when your computer is first powered on or restarted. You must press F8 before the Windows logo appears. If you do not press it in time, you will have to wait for the Windows logon screen to appear and then restart your system to try again. If you successfully press and hold the F8 key in time, you will be presented with an “Advanced Boot Options” menu.

Note: If you have more than one disk drive, you will first be prompted to select the disk to boot from. Just press “Esc” to boot from your normal disk and then immediately press F8 again.

Once you enter the “Advanced Boot Options” menu, you will notice a list with numerous choices. Use your arrow keys to select the option you want. Three of these options are for safe mode: “Safe mode”, “Safe mode with networking” and “Safe mode with command prompt.” Choose “Safe mode” for most basic troubleshooting tasks. If you want to be able to access the internet or another computer on your network while in safe mode, choose “Safe mode with networking”. Unless you have specific instructions to follow, or you are an advanced user who is familiar with DOS commands and have some specific reason to use the command prompt, it is advisable not to use the “Safe mode with command prompt” option. DOS commands can be very useful, but are also dangerous for the inexperienced user, as they do not have many of the safeguards built into the Windows utilities.

When and How to Use Safe Mode

There are primarily two times when you will want to start your computer in safe mode. The first is when your computer will not start in normal mode, or freezes up while you are attempting to troubleshoot a problem. The second is when you have, or suspect you have, a virus or some other type of malware that your antivirus software cannot remove.

If your computer will not start normally, or is locking up repeatedly, safe mode will help you to isolate the program that is causing the problem. As mentioned above, the very fact that Windows will actually start in safe mode tells you that the problem is not with your computer’s basic configuration. If the problem began immediately after you installed a new program or device, you should consider going to Recoveryin Control Panel (click Start then Control Panel and finally Recovery) to restore your system to a previous state using a Windows Restore Point. Otherwise, you can run the programs that you were trying to run when your computer crashed, or check all of the programs that automatically run when your computer is started, in an attempt to isolate the one causing the problem.

You can see what programs run when your computer is started by clicking Start andRun and then typing msconfig in the resulting text box and clicking Ok. This will bring up the “System Configuration” program. By clicking on the Startup tab, you will see a complete list of those programs that run each time your computer is started. You can then run them one-by-one, or disable them all by clicking the Disable allbutton in the lower right hand corner of the System Configuration window. If you choose to disable all of the automatically running programs, you should then restart your system to see if it will start normally. If it does, you can start re-enabling the programs one at a time by clicking the checkbox to the left of each program in the Startup tab of System Configuration and rebooting. With these two methods, you can systematically work out which program is causing the problem and uninstall it.

Additionally, since most malware (viruses, trojans, spyware, etc.) is activated every time the system is restarted, safe mode is often the only way they can be removed by antivirus and similar programs. Viruses, in particular, are often programmed in such a way that antivirus programs cannot remove them once they are running. By running your antivirus program while in safe mode, you can circumvent this problem. Because you cannot usually be completely certain that your problem is not caused by a virus, it is a good practice to automatically run your antivirus software whenever you need to enter safe mode.

If your computer automatically starts in safe mode, then you can attempt to restart your computer to see if it will start normally. If it won’t, you should proceed with the methods detailed above just as if you had initiated safe mode yourself.

Dave W. Shanahan | February 24, 2021 March 21, 2019 | How-To

You have three options to access Safe mode in Windows 10; via Settings, the Welcome sign-in screen, or from a black or blank screen using your PC’s power button.
Safe Mode from Settings
In order to access Safe Mode from Settings, here are the steps you need to follow:

  1. Press the Windows logo key + I on your keyboard to be taken directly to Settings. If your computer does not have the Windows logo key, you can go to the Start button and select the gear cog icon to go to Settings.
  2. Choose Update & Security > Recovery
  3. Under Advanced startups, select Restart now.
  4. After you Windows 10 PC restarts, you will be taken to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart.
  5. Once your Windows 10 PC restarts, you will be given a list of options. From here, press F4 to start your PC in Safe Mode, press F5 to start your PC in Safe Mode with Networking.

Applies to All Windows 10 Versions

Microsoft Support uses Safe Mode in Windows 10 for troubleshooting issues you might be having with Windows 10. By starting your PC in Safe Mode, you start Windows 10 in a bare-bones state, often limiting the number of files and drivers available to you. If you experience an issue in Windows 10 and put your PC in Safe Mode, you’ll be able to rule out the issue being caused by default settings and basic device drivers.

Windows 10 has its own Troubleshooting tool, but it is not always accurate and you might have to do more research if the issue you are experiencing is due to an edit in the Windows Registry or by using a third-party program. There are two versions of Safe mode in Windows 10; Safe Mode and Safe Mode with Networking. The only difference between the two being that Safe Mode with Networking includes the required network drivers and services you need to access the Internet or access other computers on your WiFi.

You have three options to access Safe mode in Windows 10; via Settings, the Welcome sign-in screen, or from a black or blank screen using your PC’s power button.

Safe Mode from Settings

How to exit safe mode on windows 10
In order to access Safe Mode from Settings, here are the steps you need to follow:
1. Press the Windows logo key + I on your keyboard to be taken directly to Settings. If your computer does not have the Windows logo key, you can go to the Start button and select the gear cog icon to go to Settings.
2. Choose Update & Security > Recovery.
3. Under Advanced startup, select Restart now.
How to exit safe mode on windows 10
4. After you Windows 10 PC restarts, you will be taken to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart.

How to exit safe mode on windows 10

How to exit safe mode on windows 10

How to exit safe mode on windows 10

5. Once your Windows 10 PC restarts, you will be given a list of options. From here, press F4 to start your PC in Safe Mode, press F5 to start your PC in Safe Mode with Networking.

Safe mode from the sign-in screen

How to exit safe mode on windows 10

From the sign-in screen, you can access the same menu that you accessed by starting Safe Mode from Settings:
1. Restart your Windows 10 PC from the sign-in screen by holding down either Shift key (left or right) while simultaneously selecting the Power button and choosing Restart in the lower right-hand corner of the sign-in screen.
2. After your PC restarts, you will be taken to the same Choose an option screen as shown before.
Select Troubleshoot > Advanced options > Startup Settings > Restart.
3. Once your Windows 10 PC restarts, you will be given a list of options. From here, press F4 to start your PC in Safe Mode, press F5 to start your PC in Safe Mode with Networking.

Safe Mode from a black or blank screen

Please note: If Bitlocker is on, you will need to have your Bitlocker ID key to start your Windows 10 PC in Safe Mode.
In order to start your Windows 10 PC in Safe Mode from a blank or black screen, you will need to first enter the Windows Recovery Environment (winRE). You will need to be able to turn your device off 3 times and on 3 times. When you power up your PC the third time, your PC should enter winRE automatically.
Now that you are in winRE, follow the same steps that you followed to enter Safe Mode with Networking:
1. On the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart.
2. After your Windows 10 PC restarts, press F5 to start your PC in Safe Mode with Networking.

When encountering a black or blank screen, you need Safe Mode with Networking because you need to access the Internet to troubleshoot and get to the root of the issue. If you are unable to get to the root of the issue, you may need to download and install Windows 10 again. That is the reason you need Safe Mode with Networking instead of just Safe Mode.

Get out of Safe Mode

If you want to get out of Safe Mode in Windows 10, here’s what you need to do:

1. Press the Windows logo key + R, or enter “Run” in the Start Menu.

How to exit safe mode on windows 10
2. Type “msconfig” in the Run open box and press Enter (or click OK).

How to exit safe mode on windows 10
3. Select the Boot tab.

How to exit safe mode on windows 10
4. Under Boot options, clear the Safe boot checkbox.

5. Click OK to apply the changes.

For more advanced Windows 10 users, the way to get out of Safe Mode in Windows 10 is also an easy way to enter Safe Mode in Windows 10. However, you will need to know your BitLocker key in order to use this option to enter Safe Mode. So it might not be the most practical way to enter Safe Mode in Windows 10.