Categories
Self-organization

How to upgrade your existing hard drive in under an hour

Don’t know what are the differences between Windows Home and Pro edition? Below picture will give you a brief introduction.В

How to upgrade your existing hard drive in under an hour

How to upgrade Windows 10 from Home to Pro edition? Without a key?

Not satisfied with installed Windows 10 Home edition on your PC? Are you trying to find a way to upgrade Windows 10 from Home edition to Pro edition for free?
Is it possible to free upgrade Windows 10 from Home to Pro edition without a key? Sure!
According to professional Windows tech support sites and managers, here on this page, we’ll gather and show you two free methods to upgrade Windows 10 from Home to Pro edition without losing data and formatting.

Just follow and see how to free upgrade Windows 10 from Home to Pro with ease now.

Part 1. Extend system C drive and fix existing errors on Windows PC

Before you start Windows upgrade process, it’s highly recommended for you to leave enough space in system C drive so to install new Windows 10 ISO image files.
Removing bad sectors or unknown file system errors is also highly necessary so to avoid unexpected Windows 10 update stuck or failure issue. partition manager software will effectively help with extending system C drive and repair bad sector error.
Here you may try EaseUS partition manager softwareВ for help:

Extend system C drive:

Option 1. Extend System C drive with unallocated space

  1. 1.В Right-click on the System C: drive and select “Resize/Move”.
  2. 2.В Drag the system partition end into the unallocated space so to add it to the C: drive. And click “OK”.В
  3. 3.В Click “Execute Operation” and “Apply” to execute the operations and extend the C drive.

Option 2. Extend System C drive without unallocated space

  1. 1.В Right-click a big partition with enough free space on the system disk,В select “Allocate Space”.
  2. 2. Select the systemВ drive at the Allocate Space From (*) To section,В and drag the end of System C drive into the unallocated space. Click “OK” to confirm.
  3. 3.В ClickВ “Execute Operation”, it will list the pending operations, and click “Apply” to saveВ the changes and extend the C drive.

Repair bad sectors/file system errors:

Step 1. Select the target partition that has a problem.В

Step 2. Choose “Advanced” > “Check File System”.В

Step 3. In the Check File System window, check the “Try to fix errors if found” option. В

Step 4. Click “Start” to check errors on your partition.

Here is a list of the best data recovery software for Windows and Mac users. Use data recovery software to retrieve deleted or lost data quickly.

How to upgrade your existing hard drive in under an hour

Part 2. Backup system and files before upgrade

In order to avoid data loss issue or system revert issue, it’s highly recommended for you to backup Windows 10 system and data before upgrade to Windows 10 Pro edition. Professional Windows backup recovery software – EaseUS Todo Backup can help you do the job.

Part 3. Free upgrade Windows 10 from Home to Pro edition

After Step 1 and Step 2, you can now upgrade Windows 10 from Home to Pro edition with either method offered below.

Method 1. Manually upgrade from Windows 10 Home to Pro by upgrading Windows Store

1. Open Windows Store, log in with your Microsoft Account, click on your account icon and select Download and Updates;
2. Select Store, click Update under Store;
Wait for the Windows Store update process to complete.
3. After the update, search Windows 10 in the search box and click on it;
4. After this, click Install to upgrade your Windows 10 from Home to Pro edition.
5. Click Yes, let’s go to confirm the upgrade process.

If the process is 100%, which means that it’s almost done and you’ll need to restart your PC manually when you receive Succeed message.

How to upgrade your existing hard drive in under an hour

6. Go to Settings > Update & security > Activation to check if it is Activated. Usually, it would be activated. If not, purchase a key for the activation.

Method 2. Upgrade Windows 10 from Home to Pro edition without activation

How to upgrade your existing hard drive in under an hour

2. Click Go to Store > Click on Upgrade to Pro so to upgrade from Home edition to Pro edition;

How to upgrade your existing hard drive in under an hour

You don’t have to pay for an activation key right now, you can buy it later after the upgrade process.

How to upgrade your existing hard drive in under an hour

3. Click Start upgrade when you see the features of Pro edition and click Yes, let’s go to confirm.

How to upgrade your existing hard drive in under an hour

4. Wait for the process complete at 100% and restart PC, then you’ll get Windows 10 Pro edition upgraded and installed on your PC.В

Now you can use Windows 10 Pro on your PC. And you may need to activate the system after 30 days free trial by then.В

If you lost data after Windows 10 upgrade, you can restore it from backup images created before the upgrade.В
If you want to revert to the previous system, you can try Windows revert access to downgrade Pro to Home edition or directly perform system restore to downgrade Windows 10 Pro to Home from system image created by EaseUS Todo Backup.

If Internet Explorer is installed on your system, first determine the version that you have:

1. Start Internet Explorer.
2. From the top of the browser tool bar select “Help”.
3. From the drop down panel select “About Internet Explorer”.
4. A window will appear displaying the version number.

Upgrade instructions for users with Internet Explorer 4.0 (or later versions):
All other users, should skip to the instructions for other browsers below.

1. Save your work and close all programs on your PC.
2. Start Internet Explorer.
3. From the top of the browser tool bar select “Tools”.
4. From the drop down panel select “Windows Update” which will display the Microsoft Windows Update web page.
5. On the resulting web page click “Product Updates”.
6. Scroll down the next page and check the box next to the latest version of Internet Explorer. Do not check any other boxes on this page.
(At the time of this writing, version 5.5 was the latest).
7. Click the blue “download” arrow. Confirm your selection on the “Download Checklist” web page.
8. Click “Start Download” under Step #3. Click “Yes” in the “License Agreement” window that appears.
9. A gray panel entitled “Microsoft Windows Update” will appear while the setup program is downloading to your hard drive.
10. Once again, a white and blue “License Agreement” panel will appear. Accept the agreement and click “Next”.
11. Choose “Install Now – Typical set of components” and click “Next”.
12. At this point an installation progress window will appear while the upgrade proceeds for several minutes.
13. When the upgrade is complete, select “Yes” to restart your computer.

Office 2010 reaches end-of-support

Office 2010 reached its end of support on October 13, 2020. Microsoft will no longer provide the following:

Technical support for issues

Bug fixes for issues that are discovered

Security fixes for vulnerabilities that are discovered

Is this the right topic for you?

If you’re the admin responsible for the Microsoft 365 for business subscription in your organization, you’re in the right place. Admins are typically responsible for tasks like managing users, resetting passwords, managing Office installs and adding or removing licenses.

If you’re not an admin and you have a Microsoft 365 Family product, see How do I upgrade Office for information about upgrading your older, home use version of Office.

Get ready to upgrade to Microsoft 365

As an admin, you control what version of Office people in your organization can install. We highly recommend that you help users in your organization running older versions of Office such as Office 2010, Office 2013, or Office 2016 upgrade to the latest version to take advantage of its security and productivity improvements.

Upgrade steps

The steps below will guide you through the process of upgrading your users to the latest Office desktop client. We recommend you read through these steps before beginning the upgrade process.

Step 1 – Check system requirements

Check the system requirements for Office to make sure your devices are compatible with the latest version of Office. For example, newer versions of Office can’t be installed on computers running Windows XP or Windows Vista.

If you have users in your organization running older versions of Windows on their PCs or laptops, we recommend upgrading to Windows 10. Windows 7 has reached end of support. Read Support for Windows 7 ends in January 2020 for more info.

Check out the Windows 10 system requirements to see if you can upgrade their operating systems.

Check application compatibility

To ensure a successful upgrade, we recommend identifying your Office applications–including VBA scripts, macros, third-party add-ins, and complex documents and spreadsheets–and assessing their compatibility with the latest version of Office.

For example, if you’re using third-party add-ins with your current Office install, contact the manufacture to make sure they’re compatible with the latest version of Office.

Step 2 – Check your existing subscription plan

Some Microsoft 365 plans don’t include the full desktop versions of Office and the steps to upgrade are different if your plan doesn’t include Office.

If your existing plan includes Office, move on to Step 3 – Uninstall Office.

If your existing plan doesn’t include Office, then select from the options below:

Upgrade options for plans that don’t include Office

Option 1: Switch Office subscriptions

Switch to a subscription that includes Office. See Switch to a different Microsoft 365 for business plan.

Option 2: Buy individual, one-time purchases of Office, or buy Office through a volume license

Buy an individual, one-time purchase of Office. See Office Home & Business or Office Professional

Buy multiple copies of Office through a volume license. See, Compare suites available through volume licensing.

Step 3 – Uninstall Office

Before installing the latest version of Office, we recommend you uninstall all older versions of Office. However, if you change your mind about upgrading Office, note the following instances where you won’t be able to reinstall Office after uninstalling it.

We recommend if you have third-party add-ins, contact the manufacturer to see if there’s an update that will work with the latest version of Office.

If you run into issues while uninstalling Office, you can use the Microsoft Support and Recovery Assistant tool to help you remove Office: Download and run the Microsoft Support and Recovery Assistant.

Select the version of Office you want to uninstall

Known issues trying to reinstall older versions of Office after an uninstall

Office through a volume license If you no longer have access to the source files of these volume license versions of Office, you won’t be able to reinstall it.

Office pre-installed on your computer If you no longer have a disc or product key (if Office came with one) you won’t be able to reinstall it.

Non-supported subscriptions If your copy of Office was obtained through discontinued subscriptions, such as Office 365 Small Business Premium or Office 365 Mid-size Business, you won’t be able to install an older version of Office unless you have the product key that came with your subscription.

If you’d prefer to install your older version of Office side-by-side with the latest version, you can see a list of versions where this is supported in, Install and use different versions of Office on the same PC. A side-by-side installation might be the right choice for you, if for example, you’ve installed third-party add-ins you’re using with your older version of Office and you’re not yet sure they’re compatible with the latest version.

Step 4 – Assign Office licenses to users

If you haven’t already done so, assign licenses to any users in your organization who need to install Office, see Assign licenses to users in Microsoft 365 for business.

Step 5 – Install Office

After you’ve verified the users you want to upgrade all have licenses, the final step is to have them install Office, see Download and install or reinstall Office on your PC or Mac.

If you don’t want your users installing Office themselves, see Manage software download settings in Office 365. You can use the Office Deployment Tool to download the Office software to your local network and then deploy Office by using the software deployment method you typically use.

“I recently purchased a 250GB SSD and I want to install Windows 10 on it to become my primary boot drive, and then make my existing HDD purely for storage. My question is: How do I use the SSD only as boot drive and use the HDD as a storage/usage drive, where all programs, games, and such will be stored and used on. What would be the best way to go about making this transition?”

SSD has higher speed and stronger stability while HDD has larger capacity. Do you know how to setup SSD and HDD in your computer to make it work best? Actually, nowadays more and more users choose to use SSD for OS and HDD for storage to get both better performance and larger capacity. To be honest, that is really a good choice. You can make full use their advantages to help your computer gain the best performance. So if you are currently using HDD as the boot drive, you can choose to move the Windows system from HDD to SSD and then set SSD as the boot drive. And then use the HDD with a larger capacity to store personal data, files, and applications. In this passage, you will learn how to set SSD as boot drive and HDD as storage drive in Windows computer.

Part 1: Do Preparations for Windows OS Migration

1. Prepare a SSD with enough space. If you want to change your boot drive from HDD to SSD in your Windows computer, of course you need to prepare a SSD first of all. And you have to make sure that the SSD has larger (or at least equal) capacity to the used space on your system drive in your current HDD. This SSD is used to receive the Windows OS copied from your HDD. It can be a new SSD or a used SSD. However, a new one is more recommended than an old one. If the SSD has been used before, you should make a backup of data in it to another place to avoid data loss during the process.

2. Choose a reliable Windows OS migration tool. As what we have talked about from the very start of this passage, you need to migrate the Windows OS from the HDD to the SSD if you want to use the SSD as the boot drive. Then a Windows OS migration software is needed. As there are too many Windows migration software online, it’s hard to distinguish which is good and which is bad. Here, based on my personal experience, I recommend you Cocosenor Backup Tuner. Cocosenor Backup Tuner can help you copy Windows OS from HDD to SSD easily without any booting issues.

Part 2: Move Windows System from HDD to SSD

Step 1: Connect the SSD that you have prepared to your Windows computer, and then go to Disk Management to initialize the SSD and create one volume for it to make it can be detected by your computer. But for a SSD that has been used before, you can skip this step.

How to upgrade your existing hard drive in under an hour

Step 2: Download Cocosenor Backup Tuner from the official website and install it on your Windows computer. Then launch the software and come to the “Copy” interface.

How to upgrade your existing hard drive in under an hour

Step 3: Select the system partition (it’s usually the C drive) from the HDD as the source partition and select the connected SSD as the target partition to receive the copied Windows system. In addition, make sure the option of “Set the target partition as the boot disk” is selected.

How to upgrade your existing hard drive in under an hour

Step 4: Click the button of “Start” to go on if there are no other problems. Then a small window will pop up to ask for your confirmation, click “Yes” to proceed to migrate the Windows OS to the SSD.

How to upgrade your existing hard drive in under an hour

Step 5: Wait for the copy process to finish. Once the process is completed, you will be told that the Windows copied from the HDD to SSD successfully.

How to upgrade your existing hard drive in under an hour

Part 3: Make Your Computer Boot from the SSD

Once you have finished the above two steps, you’re half done. At this time, the previous system partition has been completely moved to the SSD. To set SSD as the boot drive, now you need to boot your computer from the SSD.

How to upgrade your existing hard drive in under an hour

Part 4: Format the Windows System Partition in HDD

After you boot your computer from the SSD, you can now format the system partition in your original HDD to make room for data storage. To format the system partition in your Windows computer, you should:

Step 1: Open Disk Management and then right click the system partition in your original HDD, choose the option of “Format” from the context menu.

How to upgrade your existing hard drive in under an hour

Step 2: Click the button of “OK” to move on. Then you will get a warning message telling you that formatting this volume will erase all data on it, click “OK” again to confirm your actions.

How to upgrade your existing hard drive in under an hour

Step 3: Then you can use the HDD as the storage drive to store applications, personal files, videos, photos, as well as other large data in your computer.

If your gaming computer is running slowly, has long load times, shows screen tearing, lag or other artifacts, you could be wondering what you need to upgrade on your PC. It’s likely that your hardware could be to blame. If it’s been a while since you bought a new computer or upgraded the components, it might be time to take a look at what’s available now and what could improve your gaming. Follow these steps for the best gaming PC upgrades to ensure you get the most out of your hardware.

Step 1: Install RAM

If you’re having difficulty loading pages, live streaming, or switching among applications, one gaming PC upgrade to consider is increasing or replacing your computer memory (RAM). RAM stores data that is currently being used. Many games store textures and maps in RAM.

Most factory-built computers have slots to add more memory modules. If there isn’t room for more modules, you can replace existing memory with larger-capacity modules.

The Crucial® Advisor™ tool or System Scanner tool can tell you which memory modules are compatible with your computer.

Step 2: Upgrade storage

If your current storage drive is nearly full or if it is just too slow and you’re experiencing freezing or hangs, upgrade it. If you have a traditional hard drive (HDD), this is a good time to look into a solid state drive (SSD). SSDs start up faster and are more reliable and durable than HDDs. SSDs run at a higher speed, and allow the entire system to run more efficient because the other components are not waiting for data like they do when using a HDD.

Compare the current capacity of your storage drive with newer models. Both hard drives and solid state drive manufacturers are always increasing the storage capacity of drives. You can get a faster drive with more storage space relatively cheaply.

The Crucial® Advisor™ tool or System Scanner tool can tell you which SSDs are compatible with your computer.

Can I copy only new files to an external hard drive in Windows 10? On this page, you’ll find two efficient way that can help you fully backup all valuable files with ease:

Can I backup only changed files in Windows 10?

Hi guys, do you know how to back up the only changed files in Windows 10? I’m using File History for file backup in Windows 10 but File History will copy each file every time when it executes the backup command.

How can IВ back up the files that only altered in Windows 10?В Help please.”

Can Windows 10 back up only changed files? Some of you may have the same questions why trying to create a backup of newly changed files on Windows 10 computers. The answer is Yes but the process is quite complex.

To execute this task in Windows 10, you can follow either method as shown belowВ by applying powerful backupВ softwareВ for Windows 10 and the Windows 10 Backup and Restore feature for help.В

Follow andВ learnВ how to copy and create a backup of your changedВ files with aВ step-by-step guide in the next two methods.

Method 1. Back Up Only New/Changed Files to External Hard Drive With Software

For most Windows beginners, it’s a wise decision to turn to Windows backup software toВ update and create a backup of only alteredВ files like music, images, documents, videos, etc., on Windows 10 PC.

Powerful backup software -В EaseUS Todo Backup with itsВ incremental backup function can help.В

EaseUS Data Recovery Wizard

  • Back up only changedВ files, like documents, photos, audio, music, emails effectively.
  • Back up Windows OS, hard disk partitions, even clone disk.В
  • Compress the backup image, occupying small storage space on your PC or external hard drive.

Support Windows 10/8.1/8/7/Vista/XP

Tutorial: Back Up Only ChangedВ or New Files to External Hard Drive with EaseUS Todo Backup

Before you start, remember to empty your external hard drive and connect it to your computer. Then start with the following steps:

Step 1. Open EaseUS Todo Backup and select “File”.

You may have a large amount of vital data to be protected as time goes on, such as documents, pictures, music, and videos, etc. It is always a good habit to have a backup on a regular basis.В

How to upgrade your existing hard drive in under an hour

Step 2. Select the files that you want to back up.

If you just want to back up one or some specific file types from one folder, the option at the top right corner can help you exclude other files.

How to upgrade your existing hard drive in under an hour

Step 3. Select a destination to save your backup file.

How to upgrade your existing hard drive in under an hour

Step 4. Click “Schedule” to create an automatic incremental backup.

For example, if you want to back up these files every Sunday, select “Weekly”, and select “Sun”. Then, set the backup method as Incremental.

Our software will start with a full backup for the first time. After that, it will execute a backup task for only changed files every Sunday.В

How to upgrade your existing hard drive in under an hour

If you have enough space, you can also select the “Appoint weekly first backup as Full” option. This option enables you to take a full backup and an incremental backup at the same time. But it takes a lot of disk space.

Step 5.В Click “Save” and then click “Proceed” to execute the full back up.В

Once done, it will automatically execute an incremental backup on a set day.

After this, EaseUS Todo Backup will automatically backup files that only altered for you in Windows 10 after the first full backup operation. Nothing else you’ll need to do later.В

Method 2. Back Up Only Changed/New FilesВ in Windows 10 via Backup and Restore

Another way that you can try is to apply Windows built-in tool – Backup and Restore (Windows 7) for creating a scheduled backup plan.

By doing so, you can also backВ up newly added or updated files with manual steps. As the process is a bit complex,В follow and try this method carefully:

Step 1. Connect an external hard drive with enough space to your PC.

Step 2.В Press Windows + S keys, type Control Panel in the Search box, and click toВ openВ Control Panel.

How to upgrade your existing hard drive in under an hour

Step 2. ClickВ “Backup and Restore (Windows 7)” to open it.

How to upgrade your existing hard drive in under an hour

Step 3. On the right pane, click “Set up backup“.
Step 4. Select the external hard drive to save your backup and click “Next”.

How to upgrade your existing hard drive in under an hour

Step 5. Select the files you want to back up.

You can follow the default Windows settings or decide for yourself.

Step 6. On the set up backup window, tick “Run backup on a schedule”, set the plan and click “OK”.

Here,В you need to setВ the backup schedule for how often, what day for the new backup, which will add newly changed files to your next backup.

How to upgrade your existing hard drive in under an hour

Step 7. Click Save settings and run backup“.

Now files that have transformed and new files that have been created since your last backup will be added to your backup according to the schedule you set.

Sum Up

On this page, we collected two reliable ways to help you back up important Windows 10 files that have changed recently. For an easier way out, EaseUS Todo Backup is recommended for you to try.В It’s secure and reliable.В

Ready to move on up to Windows 10? Here are all the steps you need for success.

Windows 10 is finally here and it’s the best version of the operating system we’ve seen in a while. Even better, it’s a free update if you already have Windows 7 or newer.

The new operating system is available as an update starting July 29 and we recommend you upgrade. If you’re ready to bring your Windows 8 or 7 machine up to the latest version of Microsoft’s OS, there are few things you’ll have to do to make the upgrade as painless as possible. I’ve outlined the key steps to follow below.

Step 1: Make sure your computer is eligible for Windows 10

  • Windows 10 is free for anyone running the latest version of Windows 7, Windows 8 and Windows 8.1 on their laptop, desktop or tablet computer.
  • You can figure out which version your computer by heading to Microsoft’s website.
  • You must be an administrator on your computer, meaning that you own the computer and set it up yourself. It’s very likely that you will not be able to update work computers that are managed by an IT department on your own.

Step 2: Back up your computer

To protect all of the files you have on your computer, I highly recommended that you back up your computer, just in case something goes wrong during the upgrade process. For a detailed process on how to do this, check out CNET’s guide to preparing your PC for Windows 10.

Step 3: Update your current Windows version

You will need to install all of the updates for the current version of Windows you have on your machine. If you’ve set up automatic updates, you should be all set, but double-check first.

  • On Windows 7, go to Start, Control Panel, System and Security and Windows Update.
  • On Windows 8 and 8.1, go to Start, PC Settings, Update and recovery, and Windows Update.
  • On all versions of Windows, your computer will you if there are any available updates and walk you through the process of downloading and installing them.
  • You may need to check for and install updates several times to finish this process.

Step 4: Wait for the Windows 10 prompt

Once your computer has the latest updates, you’ll need to wait for a Windows icon to pop up in the taskbar on your desktop, letting you know you can reserve Windows 10. Follow the directions on the screen to let Microsoft know that you would like the Windows 10 update. You may enter your email address to confirm the update, but it is not necessary.

When you’re finished with the reservation process, all you can do is sit back and wait for Microsoft to automatically send Windows 10 to your computer, a process that can take several days or weeks. When it’s time to install the update, you will get a notification on your computer.

Advanced users only: Get Windows 10 directly from Microsoft

If you’ve finished all the above steps and do not want to wait another minute to get Windows 10, there is a way to speed things up. Check out CNET’s guide to manually downloading and installing Windows 10 to jump the line and get started now. However, use this process at your own risk, because it can be more complicated than simply waiting for the update to arrive.

Increase the overall speed of your PC, the time it takes to boot and load programs by following our simple guide to installing a solid state drive. Having successfully helped thousands of people of all ages, backgrounds, and computer-skill levels install SSDs, we’re confident that you too, will be able to expertly install an SSD in your desktop PC. Installing an SSD requires little more than a screwdriver and your system’s owner’s manual, so let’s install an SSD in your desktop computer.

Transferring data to your new hard drive

If you are replacing your existing drive, we recommend the use of data migration (cloning) software to move all the files from your existing drive onto your new hard drive. Data migration software is available here at Crucial.com.

To install an SSD in a Mac ® system, the process is different – follow our Mac-specific SSD install steps here.

Warning! — Static electricity can damage the components in your system. To protect your system’s components from static damage during the installation process, touch any of the unpainted metal surfaces on your computer’s frame or wear an ESD wrist strap before touching or handling internal components. Either method will safely discharge static electricity that’s naturally present in your body.

How to install an SSD safely

  • To protect your new SSD, do not touch the connectors on the drive.
  • Do not open the SSD. Doing so will void your warranty.

Desktop SSD installation instructions

1. Make sure you’re working in a static-safe environment

Remove any plastic bags or papers from your work space.

2. Gather supplies

  • 2.5-inch Crucial ® SSD
  • Screwdriver
  • Your computer’s owner’s manual (which will specify the type of screwdriver you need)

3. Shut down your system

When your system has been powered off, unplug the power cable.

4. Hold down the power button for 5 seconds to discharge residual electricity

5. Open your desktop’s case

Refer to your system’s owner’s manual for how to do this.

6. Ground yourself by touching an unpainted metal surface

This is an extra safeguard that protects your drive and components from static damage during the installation process.

7. Locate the storage bay

Refer to your owner’s manual for the exact location and note the size of the bays.

Some storage bays and existing hard drives are significantly larger than a standard size SSD. If this is the case in your system, you’ll need a 2.5-inch to 3.5-inch converter to make the SSD fit snugly. Remove your old drive and disconnect any cables and brackets attached to it.

8. Plug the SSD into your system

Don’t force the connection – it should plug in easily and fit snugly.

To install the SSD as a secondary drive (not your primary or boot drive), use a SATA cable and attach one end of the cable to the SATA connector on your motherboard. Attach the other end of the SATA cable to your Crucial SSD. Then, use an available SATA power cable coming from your system’s power supply and connect the cable to your Crucial SSD. For either type of install, consult your owner’s manual for how to remove an existing drive (if necessary), and how to handle the cables.

9. Reassemble your desktop

10. Power on your computer

Your SSD is installed!

Have some fun and see how much faster your desktop boots up and apps load! You can make your SSD even faster by downloading our Crucial Storage Executive 1 software and enabling the Momentum Cache feature. Click here to download Storage Executive.

1 Enable the Momentum Cache feature in Storage Executive to get up to 10x faster performance, validated by testing included in the “Enhance Burst Performance on Micron and Crucial SSDs Using Momentum Cache” whitepaper.

© 2017 Micron Technology, Inc. All rights reserved. Information, products, and/or specifications are subject to change without notice. Neither Crucial nor Micron Technology, Inc. is responsible for omissions or errors in typography or photography. Micron, the Micron logo, Crucial, and the Crucial logo are trademarks or registered trademarks of Micron Technology, Inc. Mac is either a registered trademark or trademark of Apple, Inc in the United States and/or other countries. All other trademarks and service marks are the property of their respective owners.

SDD stands for ‘Solid State Drive.’ SSD drives are the same shape and size as a traditional drive. The difference is that an SSD drive uses RAM chips instead of a spinning hard disk to store information. This makes it much, much faster.

SSD drives are now reasonably cheap. I’d suggest you upgrade your entire hard drive to SSD.

1. Order an SSD.

There have been issues in the past with SSD drives and there have been some brands not working with OSX, so make sure you get a good one.

The first place I would recommend is macsales.com. I have one of their OWC Mercury SSD drives in 2 of my laptops. They have a screen where you choose your macintosh computer, and it tells you which SSD drive is compatible. Just click here and you will be asked what mac you have, follow the prompts. (I have signed up to be an affiliate of Macsales so I get a commission if you use these links.) Last check a 1TB drive was under $400. When I first wrote this article a 480G SSD drive was $1579.99!

The second place I would recommend is crucial.com. If you do get a Crucial SSD you can go for the MX or BX series. I’ve also got a Samsung EVO drive running in a 2012 Macbook pro and it’s running fine. Buy a new SSD not a second hand one. They do degrade over time.

2. Temporarily connect the new SSD Drive to your Mac.

For this you will need a cable to connect your SSD drive to your USB port. They are only about $20 and they look like this:

How to upgrade your existing hard drive in under an hour

The external drive enclosures for normal hard disks should also work with an SSD.

Plug the SSD into the enclosure, and then into the Mac, and it should appear on the desktop as an ‘Untitled’ drive.

3. Format the SSD Drive using disk utility.

After your SDD drive is plugged in you’ll need to use Disk Utility to format it – Mac OS Extended (Journaled):

4. Copy everything onto the new boot drive.

Now you need to copy your entire drive onto your SSD drive. You can’t do this by hand – there are hidden files that need to be copied, so need to make what is called a ‘Clone.’ Apple’s built-in Disk Utility won’t do this so you will need an app like Carbon Copy Cloner or Super Duper.

Using Carbon Copy Cloner, select your boot drive as the target Disk and then select ‘Backup Everything’:

How to upgrade your existing hard drive in under an hour

Click ‘Clone’ and your boot disk will be created on the SSD disk.

The other option is to use Super Duper. There’s a free version that will enable to clone your drive. Select ‘Backup -all files’ to make a clone.

How to upgrade your existing hard drive in under an hour

Making a clone of you drive can take a long time – hours – so take a break!

5. Reboot from the new SSD boot drive.

Under System Preferences click Startup Drive select the SSD Drive, then restart! (wow – notice how fast it is!)

6. Swap the internal Hard disk for the SSD drive.

Now that it’s working it’s time to get rid of your old hard drive and physically replace it with the working SSD.

The difficulty of this varies according to what kind of a Macintosh computer you have. I’d check out ifixit.com for the best instructions according to your mac model.

Mac Pro

Difficulty: easy – 30 seconds.

For a mac pro it simply connects into the spare optical bay slot – no adapters needed, a 30 second operation – see how here. I just sat the SSD drive in and added a bit of gaffe tape but there are some great adapters out there eg Angelbird SSD Adapter

Macbook

Difficulty: moderate – 1 hour.

For a Macbook or Macbook Pro can replace the internal optical drive with your old Hard Drive or order a large SSD drive and replace your old hard drive with it. You can find instructions here.

Mac Mini

Difficulty: hard – 1/2 hr.

For a new aluminium mac mini you will need to replace one of the internal drives. This involves pulling out the fan and motherboard to get the new SSD drive in. You can get the old hard disk out without pulling out the motherboard but the SSD drives are actually ever so slightly thicker and more uniform in shape so the motherboard needs to come out to manoeuvre the SSD drive in place. There’s easy to follow instructions here at mac fixit.

iMac

Difficulty: hard – 1/2 hr.

It’s quite complex to pull the iMac apart and you need a vacuum clamp to pull the glass screen off. This is easier than it sounds, but you still need to but the suction caps to do it. It requires some mechanical skill. There are good instructions here and crucial have their own guide here.

So how fast is it? Here’s a demo of how quickly applications launch from my new SSD drive…

7. Check if you need to Enable TRIM.

Some Hard Drives do not come with TRIM support and so you need to download this TRIM Enabler app and run it. This will enable OS X built in TRIM support which keeps your SSD drive lean and clean.

The SSD I recommend above (Crucial M4) does not need TRIM support (read this article for more information). You can turn it on anyway no problems. The OWC Mercury SSD drives do not need TRIM enabled either.

STOP PRESS: There are new reports that TRIM enabler does not work with Yosemite. Read this article for more information.

8. Time Machine

If you already have a Time Machine backup, when you change Hard Drives it starts all over again and won’t recognise the old Time Machine backup. Read this post for info on how to get around this. Also here is another very good article on this.

I also just found this GREAT article on keeping Time Machine working when you change the Hard Drive.

If you don’t have a Time Machine backup now is a great time to start! You can use your old Internal Drive as a backup drive.